Pasar al contenido principal

DISPOSITIVOS HIBRIDOS DE SILICIO/CALCOGENURO DE CAPA DELGADA PARA TECNOLOGIAS FOTOVOLTAICOS SOSTENIBLES DE BAJO COSTE Y MUY ALTA EFICIENCIA

ENE2017-87671-C3-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduction of Charge Traps and Stability Enhancement in Solution-Processed Organic Field-Effect Transistors Based on a Blended n-Type Semiconductor

  • Campos García, Antonio
  • Riera Galindo, Sergi
  • Puigdollers-González, Joaquim
  • Mas Torrent, Marta
Solution-processed n-type organic field-effect transistors (OFETs) are essential elements for developing large-area, low-cost, and all organic logic/complementary circuits. Nonetheless, the development of air-stable n-type organic semiconductors (OSC) lags behind their p-type counterparts. The trapping of electrons at the semiconductor–dielectric interface leads to a lower performance and operational stability. Herein we report printed small molecule n-type OFETs based on a blend with a binder polymer, which enhances the device stability due to the improvement of the semiconductor–dielectric interface quality and a self-encapsulation. Both combined effects prevent the fast oxidation of the OSC. Additionally, a CMOS-like inverter is fabricated depositing a p-type and n-type OSCs simultaneously., This work was funded by the European Research Council (ERC) StG 2012-306826 e-GAMES project. The authors also thank the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN); the Generalitat de Catalunya (2017-SGR-918); and the Spanish Ministry of Economy and Competitiveness, through the projects FANCY CTQ2016-80030-R and ENE2017-87671-C3-2-R, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496). A.C. is enrolled in the Materials Science Program of UAB and acknowledges FPU fellowship from the Ministry., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Textured PDMS films applied to thin crystalline silicon solar cells

  • Rosell, Arnau
  • Martín García, Isidro|||0000-0001-8833-9057
  • Garin Escriva, Moises|||0000-0003-1309-7457
  • López Rodríguez, Gema|||0000-0003-4806-5180
  • Alcubilla González, Ramón|||0000-0003-4827-4513
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Front surface texturization is a standard procedure used to improve optical properties of photovoltaic devices. In some particular cases, such as when dealing with ultrathin substrates, common texturization techniques can become unpractical or even unfeasible. Texturized polymer films applied on top of such devices may be used as an alternative. In this article, we report on the development of textured polydimethylsiloxane (PDMS) films to be placed on top of planar crystalline silicon solar cells based on thin substrates (=40 µ m). The PDMS polymer is deposited onto a rough surface (conventional random pyramid textured silicon), cured and detached from it. By scanning electron microscope images, we demonstrate that the dilution of PDMS into toluene helps in a better replica of the master surface. Next, we apply the optimized PDMS films on top of dummy samples based on 10, 20, and 40 µm thick crystalline silicon (c-Si) substrates whose reflectance is significantly reduced after placing the PDMS films. Accurate optical simulations indicate that the optical improvement comes from three mechanisms: higher light transmission into the device, lower reflectance at the c-Si surface, and better light trapping properties at the thin c-Si absorber. Experimental verification of the optical improvement with texturized PDMS films is reported based on 40 µ m thick solar cell, where a short-circuit current density gain of 1.7 mA/cm 2 is observed., This work was funded by MINECO from Spanish government under projects TEC2017-82305-R, ENE2016-78933-C4-1-R, ENE2017-87671-C3-2-R. The work was also supported in part by project REFER COMRDI15-1-0036 funded by ACCIÓ and the European Regional Development Fund (FEDER)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Influence of co-sputtered Ag:Al ultra-thin layers in transparent V2O5/Ag:Al/AZO hole-selective electrodes for silicon solar cells

  • Tom, Thomas
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Asensi López, José Miguel
  • Andreu Batallé, Jordi
  • Bertomeu Balagueró, Joan
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • López-Pintó, Nicolau
As optoelectronic devices continue to improve, control over film thickness has become crucial, especially in applications that require ultra-thin films. A variety of undesired effects may arise depending on the specific growth mechanism of each material, for instance a percolation threshold thickness is present in Volmer-Webber growth of materials such as silver. In this paper, we explore the introduction of aluminum in silver films as a mechanism to grow ultrathin metallic films of high transparency and low sheet resistance, suitable for many optoelectronic applications. Furthermore, we implemented such ultra-thin metallic films in Dielectric/Metal/Dielectric (DMD) structures based on Aluminum-doped Zinc Oxide (AZO) as the dielectric with an ultra-thin silver aluminum (Ag:Al) metallic interlayer. The multilayer structures were deposited by magnetron sputtering, which offers an industrial advantage and superior reliability over thermally evaporated DMDs. Finally, we tested the optimized DMD structures as a front contact for n-type silicon solar cells by introducing a hole-selective vanadium pentoxide (V2O5) dielectric layer., This research has been supported by the Spanish Ministerio de Economía, Industria y Competitividad and the European Regional Development Fund through the projects ENE2016-78933-C4-1-R, ENE2016-78933-C4-2-R, PID2019-109215RB-C41, PID2019-1092215RB-C43 and ENE2017-87671-C3-2-R. We acknowledge support of Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and European Social Fund (2019 FI_B 00456)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Low-cost high-sensitive suns-Voc measurement instrument to characterize c-Si solar cells

  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Piñol, Juan M.
  • Martín García, Isidro|||0000-0001-8833-9057
  • Orpella García, Alberto|||0000-0003-2726-5861
  • Masmitjà Rusiñol, Gerard|||0000-0001-9541-7586
  • López Rodríguez, Gema|||0000-0003-4806-5180
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Alcubilla González, Ramón|||0000-0003-4827-4513
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Measuring open-circuit voltage (Voc) vs. light intensity (Suns) in solar cells permits the access of cell performance without the series resistance effect. This work shows the implementation of a Suns-Voc measurement system which consists of an off-the-shelf photograph flash-lamp, a digital oscilloscope and a specifically designed photodetector board with three silicon photodiodes that covers a light intensity measurement range from 10-5 to 102 suns. The whole system is controlled via USB ports from a personal computer allowing the measurement of cell characteristics (pseudo-dark and pseudo-light current density-voltage curves, as well as the pseudo fill factor and pseudo efficiency) automatically in a very short time., This work was supported in part by the Spanish Government under a FPU grant (FPU13/04381), and projects ENE2016-78933-C4-1-R, ENE2017-87671-C3-2-R and TEC2017-82305-R. The work was also supported in part by the project REFER COMRDI15-1-0036 funded by ACCIÓ and the European Regional Development Fund (FEDER). The authors wish to thank Mr. Miguel Garcia for its help in the mechanical and electrical photodetector interface development., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A self-branched lamination of hierarchical patronite nanoarchitectures on carbon fiber cloth as novel electrode for ionic liquid electrolyte-based high energy density supercapacitors

  • Manikandan, Ramu
  • Justin Raj, Chellan
  • Nagaraju, Goli
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
This is the peer reviewed version of the following article: Ramu, M., Chellan, J. R., Goli, N., Joaquim, P., Cristobal, V., Kim, B. C., A Self‐Branched Lamination of Hierarchical Patronite Nanoarchitectures on Carbon Fiber Cloth as Novel Electrode for Ionic Liquid Electrolyte‐Based High Energy Density Supercapacitors. Adv. Funct. Mater. 2019, 1906586. https://doi.org/10.1002/adfm.201906586, which has been published in final form at https://doi.org/10.1002/adfm.201906586. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., The developments of rationally designed binder-free metal chalcogenides decorated flexible electrodes are of paramount importance for advanced energy storage devices. Herein, binder-free patronite (VS4) flower-like nanostructures are facilely fabricated on a carbon cloth (CC) using a facile hydrothermal method for high-performance supercapacitors. The growth density and morphology of VS4 nanostructures on CC are also controlled by varying the concentrations of vanadium and sulfur sources along with the complexing agent in the growth solution. The optimal electrode with an appropriate growth concentration (VS4-CC@VS-3) demonstrates a considerable pseudocapacitance performance in the ionic liquid (IL) electrolyte (1-ethyl-3-methylimidazolium trifluoromethanesulfonate), with a high operating potential of 2 V. Utilizing VS4-CC@VS-3 as both positive and negative electrodes, the IL-based symmetric supercapacitor is assembled, which demonstrates a high areal capacitance of 536 mF cm-2 (206 F g-1) and excellent cycling durability (93%) with superior energy and power densities of 74.4 µWh cm-2 (28.6 Wh kg-1) and 10154 µW cm-2 (9340 W kg-1), respectively. As for the high energy storage performance, the device stably energizes various portable electronic applications for a long time, which make the fabricated composite material open up news for the fabrication of fabrics supported binder-free chalcogenides for high-performance energy storage devices., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Air stable organic semiconductors based on diindolo[3,2-a:3',2'-c]carbazole

  • Cuadrado Santolaria, Alba
  • Cuesta, Jessica
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Velasco Castrillo, Maria Dolores
© <2018>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The extension of the p-conjugated 10,15-dihydro-5H-diindolo[3,2-a:3',2'-c]carbazole (triindole) system via the introduction of donor moieties of different nature (phenyl, naphthyl, methylthiophenyl and benzo[b]thienyl) at the 3, 8 and 13 positions together with the analysis of their optical and electrochemical properties are here reported. The final materials were integrated as organic active layers on organic thin film transistors, displaying p-type performances with excellent air stability. The GIXRD analyses showed that these compounds adopt ordered molecular layers with the proper orientation to be applied as semiconductor films in transistor devices., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Interface engineering and solid-state organization for triindole-based p-type organic thin-film transistors

  • Reig Canyelles, Marta
  • Bagdziunas, Gintautas
  • Ramanavicius, Arunas
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Velasco Castrillo, Maria Dolores
Inspired by the excellent device performance of triindole-based semiconductors in electronic and optoelectronic devices, the relationship between the solid-state organization and the charge-transporting properties of an easily accessible series of triindole derivatives is reported herein. The vacuum-evaporated organic thin-film transistors (OTFTs) exhibited a non ideal behaviour with a double slope in the saturation curves. Moreover, the treatment of the gate insulator of the OTFT device with either a self-assembled monolayer (SAM) or a polymer controls the molecular growth and the film morphology of the semiconducting layer, as shown by X-ray diffraction (XRD) analyses, atomic force microscopy (AFM) and theoretical calculations. N-Trihexyltriindole exhibited the best device performance with hole mobilities up to 0.1 cm2 V-1 s-1 at the low VG range and up to 0.01 cm2 V-1 s-1 at high VG, as well as enhanced Ion/Ioff ratios of around 106. The results suggest that the non-ideal behaviour of the here studied OTFT devices could be related to the higher interfacial disorder in comparison to that in the bulk., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Static and dynamic modeling of organic thin film transistors: effect of channel length on the Mayer-Neldel rule energy and quasistatic capacitances

  • Arfaoui, Nawel
  • Boukhili, W.
  • Mahdouani, M.
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Bourguiga, R.
In this work, pentacene based thin film transistors (TFTs) with different channel lengths (L¿=¿2.5, 5, 10 and 20¿µm) have been fabricated and characterized electrically. Exploiting the electrical characteristics, we have analyzed the channel length effect on the key parameters of fabricated TFTs. We found that the performance of pentacene-TFTs was enormously enhanced by the reduction of channel length .We have also examined the influence of contact and channel resistances (RC and Rch) on the electrical proprieties of fabricated TFTs, using the transmission line method (TLM). Then, we have modeled the dependence of the total resistance RT on the gate voltage VG using the grain boundary trapping Meyer–Neldel rule (GBT-MNR) model and we have successfully reproduced, the output characteristic of pentacene TFTs using the overall resistance extracted from the GBT-MNR model. Finally, in order to investigate the channel length effect on the dynamic behavior of fabricated devices, we have reported a dynamic model based on the quasistatic assumptions which were used for metal-oxide-semiconductor field-effect transistor (MOSFET). Accordingly, we have presented a simple small-signal equivalent circuit to calculate theoretically the capacitances of pentacene-TFTs for different channel lengths., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Near 5% DMSO is the best: a structural investigation of PEDOT: PSS thin films with strong emphasis on surface and interface for hybrid solar cell

  • Mahato, Somnath
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Mukhopadhyay, Mala
  • Mukherjee, Manabendra
  • Hazra, Satyajit
© 2019 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Effect of dimethyl sulfoxide (DMSO) doping on poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) thin films have been optimized for obtaining better hole transport layer in hybrid solar cell. The correlation between morphology and conductivity is established through atomic force microscopy and transmission length method measurements. On the other hand, change in the shape of the building blocks (from spheroidal-like to ellipsoidal-like) in the PEDOT:PSS films with DMSO concentration is apparent from their electron density profiles and topographies, suggesting possible conformational change (from coil-like to rod-like) in film by X-ray reflectivity. Such change is further evident from their compositional profiles, work functions and electronic band structures estimated from X-ray and ultraviolet photoelectron spectroscopies. In fact, complementary information suggest that near 5% DMSO doped PEDOT:PSS film is governed through maximum in-plane extended ellipsoidal-like blocks as well as well-organized in out-of-plane ordering which is likely to be the optimum structure for increased the highest electrical conductivity up to 1230¿S/cm. Finally, maximum power conversion efficiency of 11% with open-circuit voltages around 600¿mV, a short-circuit current density higher than 30¿mA/cm2 and a fill factor of 59.4% is achieved for the 5% DMSO doped PEDOT:PSS/n-Si hybrid solar cell, which is perfectly correlated with their structure., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Origin of the negative differential resistance in the output characteristics of a picene-based thin-film transistor

  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this work, we have fabricated and studied p-type picene thin-film transistors. Although the devices exhibited good electrical performance with high field-effect mobility (up to 1.3 cm 2 /V·s) and on/off ratios above 10 5 , the output electric characteristics of the devices exhibited a Negative Differential Resistance for higher drain-source voltage. Finally, a possible explanation for this phenomenon is developed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Influence of a gold seed in transparent V2Ox/Ag/V2Ox selective contacts for dopant-free silicon solar cells

  • Nguyen, Hieu Trung
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Bertomeu Balaguero, Joan
  • Asensi López, José Miguel
  • Andreu Batallé, Jordi
  • Martín García, Isidro|||0000-0001-8833-9057
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Garin Escriva, Moises|||0000-0003-1309-7457
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Alcubilla González, Ramón|||0000-0003-4827-4513
  • Tom, Thomas
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Dielectric/metal/dielectric structures based on vanadium pentoxide with a thin silver interlayer have been optimized to replace traditional transparent electrodes. As would be expected, there is a tradeoff in the metal thickness to achieve high transparency and low sheet resistance simultaneously. It has been demonstrated that an ultra-thin gold seed prevents the tendency of silver to form clusters. This wetting effect reduces the metal thickness needed to form a continuous film, which leads to a higher averaged transmittance and very low sheet resistance. On the other hand, vanadium pentoxide on silicon forms a high-quality hole-selective contact. Thus, these structures can be used as an all-in-one transparent electrode and selective contact for a new kind of heterojunction solar cells. This concept has been proved in a 13.3% efficient solar cell fabricated on n-type silicon wafers. Besides being dopant-free, the complete fabrication route did not require any sputtered transparent electrode., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhanced chiral sensing with dielectric nanoresonators

  • García Guirado, José
  • Svedendahl, Mikael
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Quidant, Romain
This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Nano letters, copyright © American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acs.nanolett.9b04334, Chiro-sensitive molecular detection is highly relevant as many biochemical compounds, the building blocks of life, are chiral. Optical chirality is conventionally detected through circular dichroism (CD) in the UV range, where molecules naturally absorb. Recently, plasmonics has been proposed as a way to boost the otherwise very weak CD signal and translate it to the visible/NIR range, where technology is friendlier. Here, we explore how dielectric nanoresonators can contribute to efficiently differentiate molecular enantiomers. We study the influence of the detuning between electric (ED) and magnetic dipole (MD) resonances in silicon nanocylinders on the quality of the CD signal. While our experimental data, supported by numerical simulations, demonstrate that dielectric nanoresonators can perform even better than their plasmonic counterpart, exhibiting larger CD enhancements, we do not observe any significant influence of the optical chirality., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Transition metal oxides for kesterite solar cells developed on transparent substrates

  • Becerril Romero, Ignacio
  • Sylla, Dioulde
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Sánchez González, Yudania|||0000-0002-5740-1150
  • Andrade Arvizu, Jacob
  • Izquierdo Roca, Víctor
  • Guc, Maxim|||0000-0002-2072-9566
  • Pérez Rodríguez, Alejandro
  • Grini, Sigbjørn
  • Vines, Lasse
  • Pusay Villarroel, Benjamín Andrés
  • Almache Hernández, Rosa Estefanía|||0000-0002-3172-5026
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Pistor, Jan Paul|||0000-0002-9244-915X
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Espindola Rodríguez, Moisés|||0000-0003-4843-7474
This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Transition-Metal Oxides for Kesterite Solar Cells Developed on Transparent Substrates, copyright © American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acsami.0c06992, Fabrication on transparent soda-lime glass/fluorine-doped tin oxide (FTO) substrates opens the way to advanced applications for kesterite solar cells such as semitransparent, bifacial, and tandem devices, which are key to the future of the PV market. However, the complex behavior of the p-kesterite/n-FTO back-interface potentially limits the power conversion efficiency of such devices. Overcoming this issue requires careful interface engineering. This work empirically explores the use of transition-metal oxides (TMOs) and Mo-based nanolayers to improve the back-interface of Cu2ZnSnSe4, Cu2ZnSnS4, and Cu2ZnSn(S,Se)4 solar cells fabricated on transparent glass/FTO substrates. Although the use of TMOs alone is found to be highly detrimental to the devices inducing complex current-blocking behaviors, the use of Mo:Na nanolayers and their combination with n-type TMOs TiO2 and V2O5 are shown to be a very promising strategy to improve the limited performance of kesterite devices fabricated on transparent substrates. The optoelectronic, morphological, structural, and in-depth compositional characterization performed on the devices suggests that the improvements observed are related to a combination of shunt insulation and recombination reduction. This way, record efficiencies of 6.1, 6.2, and 7.9% are obtained for Cu2ZnSnSe4, Cu2ZnSnS4, and Cu2ZnSn(S,Se)4 devices, respectively, giving proof of the potential of TMOs for the development of kesterite solar cells on transparent substrates., This research was supported by the H2020 Programme under the project INFINITE-CELL (H2020-MSCA-RISE-2017-777968), by the Ministry of Science and Innovation of Spain under IGNITE project (ENE2017-87671-C3-1-R), by the European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007–2013) and CERCA Programme / Generalitat de Catalunya. Authors from IREC belong to the SEMS (Solar Energy Materials and Systems) Consolidated Research Group of the “Generalitat de Catalunya” (Ref. 2017 SGR 862), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Satisfying both interfacial- and bulk requirements for organic photovoltaics: Bridged-triphenylamines with extended p-conjugated systems as efficient new molecules

  • Simokaitiene, Jurate
  • Cekaviciute, Monika
  • Volyniuk, Dmytro
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
© <2019> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In the domain of organic photovoltaic (OPV) devices, the design of new materials faces the extraordinary challenge to satisfy two opposite requirements: the new materials should exhibit weak intermolecular interactions at the donor-acceptor interface, but strong intermolecular interactions and good charge transport properties in the bulk. In an effort to progress in this direction, here we present three new diphenylethenyl substituted derivatives of methylene-bridged triphenylamine, synthesized by condensation of dimethylmethylene-bridged triphenylamines with 2,2-diphenylacetaldehyde. The synthesized compounds were found to be capable of glass formation with glass transition temperatures in the range of 65–130¿°C. The ionization potentials of these derivatives were found to be in the range of 5.29–5.68¿eV. The time-of-flight hole drift mobilities measured at room temperature well exceeded 10-2¿cm [2]/Vs for all the synthesized compounds. By combining the compounds with fullerene C70 acceptor in bilayer organic solar cells, a power conversion efficiency of 1.9% was obtained. Density functional methods-based calculations indicate that this result can be explained by considering edge-on orientations at the donor-acceptor interface. In this case, the designed architecture of the compounds has an effect to sufficiently “hide” the donor HOMO from a direct and easy contact with C70 LUMO(s), thus maintaining low level of geminate donor-acceptor charge recombination, without losing hole-transport properties in the donor bulk. These two design strategies operate consequently in different parts of the molecules, which is central to the success of the new compounds. Our study shows consequently a possible strategy for a simultaneous improvement of both interfacial- and bulk properties of molecules for OPV applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Origin of the negative differential resistance in the output characteristics of a picene-based thin-film transistor

  • Ros, Eloi
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this work, we have fabricated and studied p-type picene thin-film transistors. Although the devices exhibited good electrical performance with high field-effect mobility (up to 1.3 cm2/V¿s) and on/off ratios above 105, the output electric characteristics of the devices exhibited a Negative Differential Resistance for higher drain-source voltage. Finally, a possible explanation for this phenomenon is developed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Observation of photovoltaic effect within locally doped silicon nanojunctions using conductive probe AFM

  • Khoury, R.
  • Alvarez, José
  • Ohashi, T.
  • Martín García, Isidro|||0000-0001-8833-9057
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • López Rodríguez, Gema|||0000-0003-4806-5180
  • Jin, Chen
  • Li, J.
  • Rusli, E.
  • Bulkin, P.
  • Johnson, E. V.
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Localized p-doped nanojunctions (200–300 nm in diameter) were formed in n-type crystalline silicon substrates and were characterized using scanning electron microscopy (SEM) and conductive-probe atomic force microscopy (C-AFM). Localized doping was performed by diffusion through sub-micron sized holes in a silicon-oxide mask defined using self-organized polystyrene nanoparticles. After oxide removal, a significant brightness contrast in the SEM top and side view images strongly suggested the successful local doping of these areas. Furthermore, local current-voltage measurements performed by C-AFM revealed an open circuit voltage and a short-circuit current only in the areas defined as nanojunctions. This photovoltaic effect is driven by the laser used to control cantilever deflection in the AFM., We acknowledge the financial support of the InnoEnergy PhD School Program and the European Institute of Technology (EIT). This work was partially funded by the Spanish government under projects TEC2017-82305-R, ENE2016-78933-C4-1-R and ENE2017-87671-C3-2-R, and by the Agence Nationale de la Recherche through the ANR project “APOCALYPSO” (ANR-13- PRGE-0003-01)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Shedding light on the negative differential resistance effect observed in organic thin-film transistors

  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Reig Canyelles, Marta
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Bagdziunas, Gintautas
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Velasco Castrillo, Maria Dolores
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in ACS Applied Electronic Materials, copyright © American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/full/10.1021/acsaelm.0c00183, Organic semiconductor electronics has the potential to become a solid and industrially feasible technology, with new and stimulating applications such as the flexible and transparent electronic devices. However, organic devices still have some drawbacks that must be solved to assure quality and reliability in complex electronic systems. In this work, we focus our attention to the physical origin involved in the negative differential resistance phenomenon, often observed in the output electrical characteristics of organic thin-film transistors but rarely analyzed., This work was supported by the Spanish Government throughProjects ENE2016-78933-C4-1-R, ENE2017-87671-C3-2-R,and TEC2017-82305-R., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Textured PDMS films applied to thin crystalline silicon solar cells

  • Rosell, Arnau
  • Martín García, Isidro
  • Garin Escriva, Moises
  • López Rodríguez, Gema
  • Alcubilla González, Ramón
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Front surface texturization is a standard procedure used to improve optical properties of photovoltaic devices. In some particular cases, such as when dealing with ultrathin substrates, common texturization techniques can become unpractical or even unfeasible. Texturized polymer films applied on top of such devices may be used as an alternative. In this article, we report on the development of textured polydimethylsiloxane (PDMS) films to be placed on top of planar crystalline silicon solar cells based on thin substrates (=40 µ m). The PDMS polymer is deposited onto a rough surface (conventional random pyramid textured silicon), cured and detached from it. By scanning electron microscope images, we demonstrate that the dilution of PDMS into toluene helps in a better replica of the master surface. Next, we apply the optimized PDMS films on top of dummy samples based on 10, 20, and 40 µm thick crystalline silicon (c-Si) substrates whose reflectance is significantly reduced after placing the PDMS films. Accurate optical simulations indicate that the optical improvement comes from three mechanisms: higher light transmission into the device, lower reflectance at the c-Si surface, and better light trapping properties at the thin c-Si absorber. Experimental verification of the optical improvement with texturized PDMS films is reported based on 40 µ m thick solar cell, where a short-circuit current density gain of 1.7 mA/cm 2 is observed., This work was funded by MINECO from Spanish government under projects TEC2017-82305-R, ENE2016-78933-C4-1-R, ENE2017-87671-C3-2-R. The work was also supported in part by project REFER COMRDI15-1-0036 funded by ACCIÓ and the European Regional Development Fund (FEDER)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Origin of the negative differential resistance in the output characteristics of a picene-based thin-film transistor

  • Ros Costals, Eloi
  • Puigdollers i González, Joaquim
  • Ortega Villasclaras, Pablo Rafael
  • Voz Sánchez, Cristóbal
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this work, we have fabricated and studied p-type picene thin-film transistors. Although the devices exhibited good electrical performance with high field-effect mobility (up to 1.3 cm 2 /V·s) and on/off ratios above 10 5 , the output electric characteristics of the devices exhibited a Negative Differential Resistance for higher drain-source voltage. Finally, a possible explanation for this phenomenon is developed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interface engineering and solid-state organization for triindole-based p-type organic thin-film transistors

  • Reig Canyelles, Marta
  • Bagdziunas, Gintautas
  • Ramanavicius, Arunas
  • Puigdollers i González, Joaquim
  • Velasco Castrillo, Maria Dolores
Inspired by the excellent device performance of triindole-based semiconductors in electronic and optoelectronic devices, the relationship between the solid-state organization and the charge-transporting properties of an easily accessible series of triindole derivatives is reported herein. The vacuum-evaporated organic thin-film transistors (OTFTs) exhibited a non ideal behaviour with a double slope in the saturation curves. Moreover, the treatment of the gate insulator of the OTFT device with either a self-assembled monolayer (SAM) or a polymer controls the molecular growth and the film morphology of the semiconducting layer, as shown by X-ray diffraction (XRD) analyses, atomic force microscopy (AFM) and theoretical calculations. N-Trihexyltriindole exhibited the best device performance with hole mobilities up to 0.1 cm2 V-1 s-1 at the low VG range and up to 0.01 cm2 V-1 s-1 at high VG, as well as enhanced Ion/Ioff ratios of around 106. The results suggest that the non-ideal behaviour of the here studied OTFT devices could be related to the higher interfacial disorder in comparison to that in the bulk., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Near 5% DMSO is the best: a structural investigation of PEDOT: PSS thin films with strong emphasis on surface and interface for hybrid solar cell

  • Mahato, Somnath
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
  • Mukhopadhyay, Mala
  • Mukherjee, Manabendra
  • Hazra, Satyajit
© 2019 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Effect of dimethyl sulfoxide (DMSO) doping on poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) thin films have been optimized for obtaining better hole transport layer in hybrid solar cell. The correlation between morphology and conductivity is established through atomic force microscopy and transmission length method measurements. On the other hand, change in the shape of the building blocks (from spheroidal-like to ellipsoidal-like) in the PEDOT:PSS films with DMSO concentration is apparent from their electron density profiles and topographies, suggesting possible conformational change (from coil-like to rod-like) in film by X-ray reflectivity. Such change is further evident from their compositional profiles, work functions and electronic band structures estimated from X-ray and ultraviolet photoelectron spectroscopies. In fact, complementary information suggest that near 5% DMSO doped PEDOT:PSS film is governed through maximum in-plane extended ellipsoidal-like blocks as well as well-organized in out-of-plane ordering which is likely to be the optimum structure for increased the highest electrical conductivity up to 1230¿S/cm. Finally, maximum power conversion efficiency of 11% with open-circuit voltages around 600¿mV, a short-circuit current density higher than 30¿mA/cm2 and a fill factor of 59.4% is achieved for the 5% DMSO doped PEDOT:PSS/n-Si hybrid solar cell, which is perfectly correlated with their structure., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Transition metal oxides for kesterite solar cells developed on transparent substrates

  • Becerril Romero, Ignacio
  • Sylla, Dioulde
  • Placidi, Marcel Jose
  • Sánchez González, Yudania
  • Andrade Arvizu, Jacob
  • Izquierdo Roca, Víctor
  • Guc, Maxim
  • Pérez Rodríguez, Alejandro
  • Grini, Sigbjørn
  • Vines, Lasse
  • Pusay Villarroel, Benjamín Andrés
  • Almache Hernández, Rosa Estefanía
  • Puigdollers i González, Joaquim
  • Pistor, Jan Paul
  • Saucedo Silva, Edgardo Ademar
  • Espindola Rodríguez, Moisés
This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Transition-Metal Oxides for Kesterite Solar Cells Developed on Transparent Substrates, copyright © American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acsami.0c06992, Fabrication on transparent soda-lime glass/fluorine-doped tin oxide (FTO) substrates opens the way to advanced applications for kesterite solar cells such as semitransparent, bifacial, and tandem devices, which are key to the future of the PV market. However, the complex behavior of the p-kesterite/n-FTO back-interface potentially limits the power conversion efficiency of such devices. Overcoming this issue requires careful interface engineering. This work empirically explores the use of transition-metal oxides (TMOs) and Mo-based nanolayers to improve the back-interface of Cu2ZnSnSe4, Cu2ZnSnS4, and Cu2ZnSn(S,Se)4 solar cells fabricated on transparent glass/FTO substrates. Although the use of TMOs alone is found to be highly detrimental to the devices inducing complex current-blocking behaviors, the use of Mo:Na nanolayers and their combination with n-type TMOs TiO2 and V2O5 are shown to be a very promising strategy to improve the limited performance of kesterite devices fabricated on transparent substrates. The optoelectronic, morphological, structural, and in-depth compositional characterization performed on the devices suggests that the improvements observed are related to a combination of shunt insulation and recombination reduction. This way, record efficiencies of 6.1, 6.2, and 7.9% are obtained for Cu2ZnSnSe4, Cu2ZnSnS4, and Cu2ZnSn(S,Se)4 devices, respectively, giving proof of the potential of TMOs for the development of kesterite solar cells on transparent substrates., This research was supported by the H2020 Programme under the project INFINITE-CELL (H2020-MSCA-RISE-2017-777968), by the Ministry of Science and Innovation of Spain under IGNITE project (ENE2017-87671-C3-1-R), by the European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007–2013) and CERCA Programme / Generalitat de Catalunya. Authors from IREC belong to the SEMS (Solar Energy Materials and Systems) Consolidated Research Group of the “Generalitat de Catalunya” (Ref. 2017 SGR 862), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of co-sputtered Ag:Al ultra-thin layers in transparent V2O5/Ag:Al/AZO hole-selective electrodes for silicon solar cells

  • Tom, Thomas
  • Ros Costals, Eloi
  • Asensi López, José Miguel
  • Andreu Batallé, Jordi
  • Bertomeu Balagueró, Joan
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
  • López-Pintó, Nicolau
As optoelectronic devices continue to improve, control over film thickness has become crucial, especially in applications that require ultra-thin films. A variety of undesired effects may arise depending on the specific growth mechanism of each material, for instance a percolation threshold thickness is present in Volmer-Webber growth of materials such as silver. In this paper, we explore the introduction of aluminum in silver films as a mechanism to grow ultrathin metallic films of high transparency and low sheet resistance, suitable for many optoelectronic applications. Furthermore, we implemented such ultra-thin metallic films in Dielectric/Metal/Dielectric (DMD) structures based on Aluminum-doped Zinc Oxide (AZO) as the dielectric with an ultra-thin silver aluminum (Ag:Al) metallic interlayer. The multilayer structures were deposited by magnetron sputtering, which offers an industrial advantage and superior reliability over thermally evaporated DMDs. Finally, we tested the optimized DMD structures as a front contact for n-type silicon solar cells by introducing a hole-selective vanadium pentoxide (V2O5) dielectric layer., This research has been supported by the Spanish Ministerio de Economía, Industria y Competitividad and the European Regional Development Fund through the projects ENE2016-78933-C4-1-R, ENE2016-78933-C4-2-R, PID2019-109215RB-C41, PID2019-1092215RB-C43 and ENE2017-87671-C3-2-R. We acknowledge support of Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and European Social Fund (2019 FI_B 00456)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A self-branched lamination of hierarchical patronite nanoarchitectures on carbon fiber cloth as novel electrode for ionic liquid electrolyte-based high energy density supercapacitors

  • Manikandan, Ramu
  • Justin Raj, Chellan
  • Nagaraju, Goli
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
This is the peer reviewed version of the following article: Ramu, M., Chellan, J. R., Goli, N., Joaquim, P., Cristobal, V., Kim, B. C., A Self‐Branched Lamination of Hierarchical Patronite Nanoarchitectures on Carbon Fiber Cloth as Novel Electrode for Ionic Liquid Electrolyte‐Based High Energy Density Supercapacitors. Adv. Funct. Mater. 2019, 1906586. https://doi.org/10.1002/adfm.201906586, which has been published in final form at https://doi.org/10.1002/adfm.201906586. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., The developments of rationally designed binder-free metal chalcogenides decorated flexible electrodes are of paramount importance for advanced energy storage devices. Herein, binder-free patronite (VS4) flower-like nanostructures are facilely fabricated on a carbon cloth (CC) using a facile hydrothermal method for high-performance supercapacitors. The growth density and morphology of VS4 nanostructures on CC are also controlled by varying the concentrations of vanadium and sulfur sources along with the complexing agent in the growth solution. The optimal electrode with an appropriate growth concentration (VS4-CC@VS-3) demonstrates a considerable pseudocapacitance performance in the ionic liquid (IL) electrolyte (1-ethyl-3-methylimidazolium trifluoromethanesulfonate), with a high operating potential of 2 V. Utilizing VS4-CC@VS-3 as both positive and negative electrodes, the IL-based symmetric supercapacitor is assembled, which demonstrates a high areal capacitance of 536 mF cm-2 (206 F g-1) and excellent cycling durability (93%) with superior energy and power densities of 74.4 µWh cm-2 (28.6 Wh kg-1) and 10154 µW cm-2 (9340 W kg-1), respectively. As for the high energy storage performance, the device stably energizes various portable electronic applications for a long time, which make the fabricated composite material open up news for the fabrication of fabrics supported binder-free chalcogenides for high-performance energy storage devices., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Origin of the negative differential resistance in the output characteristics of a picene-based thin-film transistor

  • Ros, Eloi
  • Puigdollers i González, Joaquim
  • Ortega Villasclaras, Pablo Rafael
  • Voz Sánchez, Cristóbal
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this work, we have fabricated and studied p-type picene thin-film transistors. Although the devices exhibited good electrical performance with high field-effect mobility (up to 1.3 cm2/V¿s) and on/off ratios above 105, the output electric characteristics of the devices exhibited a Negative Differential Resistance for higher drain-source voltage. Finally, a possible explanation for this phenomenon is developed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Air stable organic semiconductors based on diindolo[3,2-a:3',2'-c]carbazole

  • Cuadrado Santolaria, Alba
  • Cuesta, Jessica
  • Puigdollers i González, Joaquim
  • Velasco Castrillo, Maria Dolores
© <2018>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The extension of the p-conjugated 10,15-dihydro-5H-diindolo[3,2-a:3',2'-c]carbazole (triindole) system via the introduction of donor moieties of different nature (phenyl, naphthyl, methylthiophenyl and benzo[b]thienyl) at the 3, 8 and 13 positions together with the analysis of their optical and electrochemical properties are here reported. The final materials were integrated as organic active layers on organic thin film transistors, displaying p-type performances with excellent air stability. The GIXRD analyses showed that these compounds adopt ordered molecular layers with the proper orientation to be applied as semiconductor films in transistor devices., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Static and dynamic modeling of organic thin film transistors: effect of channel length on the Mayer-Neldel rule energy and quasistatic capacitances

  • Arfaoui, Nawel
  • Boukhili, W.
  • Mahdouani, M.
  • Puigdollers i González, Joaquim
  • Bourguiga, R.
In this work, pentacene based thin film transistors (TFTs) with different channel lengths (L¿=¿2.5, 5, 10 and 20¿µm) have been fabricated and characterized electrically. Exploiting the electrical characteristics, we have analyzed the channel length effect on the key parameters of fabricated TFTs. We found that the performance of pentacene-TFTs was enormously enhanced by the reduction of channel length .We have also examined the influence of contact and channel resistances (RC and Rch) on the electrical proprieties of fabricated TFTs, using the transmission line method (TLM). Then, we have modeled the dependence of the total resistance RT on the gate voltage VG using the grain boundary trapping Meyer–Neldel rule (GBT-MNR) model and we have successfully reproduced, the output characteristic of pentacene TFTs using the overall resistance extracted from the GBT-MNR model. Finally, in order to investigate the channel length effect on the dynamic behavior of fabricated devices, we have reported a dynamic model based on the quasistatic assumptions which were used for metal-oxide-semiconductor field-effect transistor (MOSFET). Accordingly, we have presented a simple small-signal equivalent circuit to calculate theoretically the capacitances of pentacene-TFTs for different channel lengths., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of a gold seed in transparent V2Ox/Ag/V2Ox selective contacts for dopant-free silicon solar cells

  • Nguyen, Hieu Trung
  • Ros Costals, Eloi
  • Bertomeu Balaguero, Joan
  • Asensi López, José Miguel
  • Andreu Batallé, Jordi
  • Martín García, Isidro
  • Ortega Villasclaras, Pablo Rafael
  • Garin Escriva, Moises
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
  • Alcubilla González, Ramón
  • Tom, Thomas
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Dielectric/metal/dielectric structures based on vanadium pentoxide with a thin silver interlayer have been optimized to replace traditional transparent electrodes. As would be expected, there is a tradeoff in the metal thickness to achieve high transparency and low sheet resistance simultaneously. It has been demonstrated that an ultra-thin gold seed prevents the tendency of silver to form clusters. This wetting effect reduces the metal thickness needed to form a continuous film, which leads to a higher averaged transmittance and very low sheet resistance. On the other hand, vanadium pentoxide on silicon forms a high-quality hole-selective contact. Thus, these structures can be used as an all-in-one transparent electrode and selective contact for a new kind of heterojunction solar cells. This concept has been proved in a 13.3% efficient solar cell fabricated on n-type silicon wafers. Besides being dopant-free, the complete fabrication route did not require any sputtered transparent electrode., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Shedding light on the negative differential resistance effect observed in organic thin-film transistors

  • Ros Costals, Eloi
  • Reig Canyelles, Marta
  • Voz Sánchez, Cristóbal
  • Bagdziunas, Gintautas
  • Ortega Villasclaras, Pablo Rafael
  • Velasco Castrillo, Maria Dolores
  • Puigdollers i González, Joaquim
This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in ACS Applied Electronic Materials, copyright © American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/full/10.1021/acsaelm.0c00183, Organic semiconductor electronics has the potential to become a solid and industrially feasible technology, with new and stimulating applications such as the flexible and transparent electronic devices. However, organic devices still have some drawbacks that must be solved to assure quality and reliability in complex electronic systems. In this work, we focus our attention to the physical origin involved in the negative differential resistance phenomenon, often observed in the output electrical characteristics of organic thin-film transistors but rarely analyzed., This work was supported by the Spanish Government throughProjects ENE2016-78933-C4-1-R, ENE2017-87671-C3-2-R,and TEC2017-82305-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhanced chiral sensing with dielectric nanoresonators

  • García Guirado, José
  • Svedendahl, Mikael
  • Puigdollers i González, Joaquim
  • Quidant, Romain
This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Nano letters, copyright © American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acs.nanolett.9b04334, Chiro-sensitive molecular detection is highly relevant as many biochemical compounds, the building blocks of life, are chiral. Optical chirality is conventionally detected through circular dichroism (CD) in the UV range, where molecules naturally absorb. Recently, plasmonics has been proposed as a way to boost the otherwise very weak CD signal and translate it to the visible/NIR range, where technology is friendlier. Here, we explore how dielectric nanoresonators can contribute to efficiently differentiate molecular enantiomers. We study the influence of the detuning between electric (ED) and magnetic dipole (MD) resonances in silicon nanocylinders on the quality of the CD signal. While our experimental data, supported by numerical simulations, demonstrate that dielectric nanoresonators can perform even better than their plasmonic counterpart, exhibiting larger CD enhancements, we do not observe any significant influence of the optical chirality., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Satisfying both interfacial- and bulk requirements for organic photovoltaics: Bridged-triphenylamines with extended p-conjugated systems as efficient new molecules

  • Simokaitiene, Jurate
  • Cekaviciute, Monika
  • Volyniuk, Dmytro
  • Voz Sánchez, Cristóbal
  • Puigdollers i González, Joaquim
© <2019> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In the domain of organic photovoltaic (OPV) devices, the design of new materials faces the extraordinary challenge to satisfy two opposite requirements: the new materials should exhibit weak intermolecular interactions at the donor-acceptor interface, but strong intermolecular interactions and good charge transport properties in the bulk. In an effort to progress in this direction, here we present three new diphenylethenyl substituted derivatives of methylene-bridged triphenylamine, synthesized by condensation of dimethylmethylene-bridged triphenylamines with 2,2-diphenylacetaldehyde. The synthesized compounds were found to be capable of glass formation with glass transition temperatures in the range of 65–130¿°C. The ionization potentials of these derivatives were found to be in the range of 5.29–5.68¿eV. The time-of-flight hole drift mobilities measured at room temperature well exceeded 10-2¿cm [2]/Vs for all the synthesized compounds. By combining the compounds with fullerene C70 acceptor in bilayer organic solar cells, a power conversion efficiency of 1.9% was obtained. Density functional methods-based calculations indicate that this result can be explained by considering edge-on orientations at the donor-acceptor interface. In this case, the designed architecture of the compounds has an effect to sufficiently “hide” the donor HOMO from a direct and easy contact with C70 LUMO(s), thus maintaining low level of geminate donor-acceptor charge recombination, without losing hole-transport properties in the donor bulk. These two design strategies operate consequently in different parts of the molecules, which is central to the success of the new compounds. Our study shows consequently a possible strategy for a simultaneous improvement of both interfacial- and bulk properties of molecules for OPV applications., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Low-cost high-sensitive suns-Voc measurement instrument to characterize c-Si solar cells

  • Ortega Villasclaras, Pablo Rafael
  • Piñol, Juan M.
  • Martín García, Isidro
  • Orpella García, Alberto
  • Masmitjà Rusiñol, Gerard
  • López Rodríguez, Gema
  • Ros Costals, Eloi
  • Voz Sánchez, Cristóbal
  • Puigdollers i González, Joaquim
  • Alcubilla González, Ramón
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Measuring open-circuit voltage (Voc) vs. light intensity (Suns) in solar cells permits the access of cell performance without the series resistance effect. This work shows the implementation of a Suns-Voc measurement system which consists of an off-the-shelf photograph flash-lamp, a digital oscilloscope and a specifically designed photodetector board with three silicon photodiodes that covers a light intensity measurement range from 10-5 to 102 suns. The whole system is controlled via USB ports from a personal computer allowing the measurement of cell characteristics (pseudo-dark and pseudo-light current density-voltage curves, as well as the pseudo fill factor and pseudo efficiency) automatically in a very short time., This work was supported in part by the Spanish Government under a FPU grant (FPU13/04381), and projects ENE2016-78933-C4-1-R, ENE2017-87671-C3-2-R and TEC2017-82305-R. The work was also supported in part by the project REFER COMRDI15-1-0036 funded by ACCIÓ and the European Regional Development Fund (FEDER). The authors wish to thank Mr. Miguel Garcia for its help in the mechanical and electrical photodetector interface development., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Observation of photovoltaic effect within locally doped silicon nanojunctions using conductive probe AFM

  • Khoury, R.
  • Alvarez, José
  • Ohashi, T.
  • Martín García, Isidro
  • Ortega Villasclaras, Pablo Rafael
  • López Rodríguez, Gema
  • Jin, Chen
  • Li, J.
  • Rusli, E.
  • Bulkin, P.
  • Johnson, E. V.
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Localized p-doped nanojunctions (200–300 nm in diameter) were formed in n-type crystalline silicon substrates and were characterized using scanning electron microscopy (SEM) and conductive-probe atomic force microscopy (C-AFM). Localized doping was performed by diffusion through sub-micron sized holes in a silicon-oxide mask defined using self-organized polystyrene nanoparticles. After oxide removal, a significant brightness contrast in the SEM top and side view images strongly suggested the successful local doping of these areas. Furthermore, local current-voltage measurements performed by C-AFM revealed an open circuit voltage and a short-circuit current only in the areas defined as nanojunctions. This photovoltaic effect is driven by the laser used to control cantilever deflection in the AFM., We acknowledge the financial support of the InnoEnergy PhD School Program and the European Institute of Technology (EIT). This work was partially funded by the Spanish government under projects TEC2017-82305-R, ENE2016-78933-C4-1-R and ENE2017-87671-C3-2-R, and by the Agence Nationale de la Recherche through the ANR project “APOCALYPSO” (ANR-13- PRGE-0003-01)., Peer Reviewed, Postprint (author's final draft)