Pasar al contenido principal

INTEGRACION DE ALMACENAMIENTO TERMICO EN LA HIBRIDACION DE LA GENERACION EN SISTEMAS DE CALEFACCION Y REFRIGERACION DE DISTRITO CON BOMBAS DE CALOR, ENERGIA SOLAR Y BIOMASA

ENE2017-87711-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Opportunities and economic assessment for a third-party delivering electricity, heat and cold to residential buildings

  • Pinto Maquillon, Edwin Samir|||0000-0003-0231-8795
  • Gronier, Timothé
  • Franquet, Erwin
  • Serra de Renobales, Luis María
In the present context of energy transition towards a carbon neutral society, residential sector plays an important role to combat climate change since it represents about 40% of the global final energy consumption and 30% of direct CO emissions in the European Union. Polygeneration systems, facilitating the integration of renewable energies, are a feasible alternative enabling efficient use of natural resources with low environmental impact. This work analyzes the economic viability, in terms of net present value (), and environmental benefit (CO emissions) of an energy supplier company playing the role on an aggregator for both demand and supply. As an owner of a polygeneration system, optimally designed through a MILP approach, it delivers various energy services (electricity, space heating, domestic hot water and cold) to several customers (50 dwellings). The analysis is performed, considering three different business models, in two different locations, Zaragoza (Spain) and Marseille (France), with different energy demands, energy mixes and energy regulations. The optimal configuration obtained, consisting of cogeneration module, PV, reversible heat pump, boiler and thermal energy storage has shown to be very resilient and cost-effective in the scenarios analyzed. Results indicate that the proposed scheme represents an added value for both the supplier company (aggregator), with a positive , and the final customers (owing savings greater than 30%), with significant reduction of CO emissions., This work was developed in the frame of the research project ENE2017-87711-R, partially funded by the Spanish Government (Energy Program), the Government of Aragon (Ref: T55-20R), Spain, and the EU Social Fund (FEDER Program 2014-2020 "Building Europe from Aragon"). The authors also want to acknowledge the mobility program for Latin-Americans offered by Unizar-Santander Universities and to the Erasmus mobility program. The project leading to this publication has also received funding from Excellence Initiative of Université de Pau et des Pays de l’Adour – I-Site E2S UPPA, a French “Investissements d’Avenir” program.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Energy communities approach applied to optimize polygeneration systems in residential buildings: case study in Zaragoza, Spain

  • Pinto Maquillon, Edwin Samir|||0000-0003-0231-8795
  • Serra de Renobales, Luis María
  • Lázaro Fernández, Ana
The residential sector plays an important role to combat climate change. It requires alternatives to reduce its energy consumption and greenhouse gases emissions. Thus, polygeneration systems are a suitable alternative enabling efficient use of natural resources with low environmental impact. On the other hand, microgrids are considered a key component for improving power reliability and quality, besides they offer a viable solution for integrating renewable energy sources at a large scale. Accordingly, this paper proposes an approach for the design of polygeneration systems for residential buildings considering them not only as a microgrid but as a smart energy system. A Mixed Integer Linear Programming (MILP) model was developed for the optimization of polygeneration systems considering different constraints which allow the energy system to work as a microgrid. Different thermal and electrical technologies where evaluated under different conditions, finding affordable and sustainable configurations and interesting synergies between technologies. Results show the importance to consider both thermal and electrical demands and technologies simultaneously for the design of energy systems. It is highlighted the displacement of batteries by thermal energy storage to achieve more cost-effective solutions in contrast to the current tendency to uphold battery systems as the key for future energy systems., This work was developed in the frame of the research projects ENE2017-87711-R and PID2020-15500RB-I00, partially funded by the State Research Agency (SRA), the Government of Aragon (Ref: T55- 20R), and the European Regional Development Fund (ERDF). The corresponding author also acknowledges the Margarita Salas grant funded by the Europe Union-NextGenerationEU and the Ministry of Universities of Spain.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparative analysis and design of a solar-based parabolic trough–orc cogeneration plant for a commercial center

  • Pina, Eduardo Antonio
  • Serra, Luis M.
  • Lozano, Miguel A.
  • Hernández, Adrian
  • Lázaro, Ana
This paper performs technical, economic and environmental feasibility analyses of two different solar cogeneration plants, consisting of a solar system (a parabolic trough collector field coupled with thermal energy storage), an Organic Rankine Cycle (ORC), and mechanical chillers, that should cover the electrical and cooling demands of a commercial center located in Zaragoza (Spain). System A is hybridized with an auxiliary biomass boiler that complements the solar system’s thermal production, providing a constant heat supply to the ORC, which operates at full load during the operating hours of the solar system. In contrast, system B is not hybridized with biomass, so the ORC is fully driven by the solar system, operating at partial load according to the solar resource availability. Both systems are connected to the electrical grid, allowing electricity purchases and sales when needed. The design procedure involves the sizing of the equipment as well as the modelling of the hourly behavior of each system throughout the year. The physical analysis is complemented by an economic assessment, which considers investment and variable costs, as well as an estimate of the significant environmental benefits of the proposed plants. The solar plants are compared to a conventional system in which all the electrical consumption is covered with electricity purchased from the grid. The costs of the electricity produced by systems A and B are estimated at 0.2030 EUR/kWh and 0.1458 EUR/kWh, which are about 49% and 7% higher than the electricity purchase price in Spain (0.1363 EUR/kWh). These results indicate that while none of the solar plants are presently competitive with the conventional system, system B (without biomass hybridization) is actually closer to economic feasibility in the short and medium term than system A (with biomass hybridization).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluation of methods to select representative days for the optimization of polygeneration systems

  • Pinto Maquilón, Edwin Samir
  • Serra, Luis M.
  • Lázaro, Ana
The optimization of polygeneration systems considering hourly periods throughout one year is a computationally demanding task, and, therefore, methods for the selection of representative days are employed to reproduce reasonably the entire year. However, the suitability of a method strongly depends on the variability of the time series involved in the system. This work compares the methods Averaging, k-Medoids and OPT for the selection of representative days by carrying out the optimization of grid-connected and standalone polygeneration systems for a building in two different locations. The suitability of the representative days obtained with each method were assessed regarding the optimization of the polygeneration systems. Sizing errors under 5% were achieved by using 14 representative days, and the computational time, with respect to the entire year data, was reduced from hours to a few seconds. The results demonstrated that the Averaging method is suitable when there is low variability in the time series data; but, when the time series presents high stochastic variability (e.g., consideration of wind energy), the OPT method presented better performance. Also, a new method has been developed for the selection of representative days by combining the k-Medoids and OPT methods, although its implementation requires additional computational effort.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A multiperiod multiobjective framework for the synthesis of trigeneration systems in tertiary sector buildings

  • Pina, Eduardo Antonio
  • Lozano, Miguel Ángel
  • Serra, Luis María
This paper develops a multiperiod multiobjective optimization procedure to determine the optimal configuration and operational strategy of a trigeneration system assisted with solar-based technologies and thermal energy storage. The optimization model, formulated as mixed integer linear programming problem, incorporates dynamic operating conditions through time-dependent local climatic data, energy resources, energy demands, electricity prices, and electricity CO2 emission factors. The methodology is applied to a case study of a residential building in Spain. First, the single-objective solutions are obtained, highlighting their fundamental differences regarding the installation of cogeneration (included in the optimal total annual cost solution) and solar-based technologies (included in the optimal total annual CO2 emissions solution). Then, the Pareto curve is generated, and a decision-making approach is proposed to select the preferred trade-off solutions based on the marginal cost of CO2 emissions saved. Additionally, sensitivity analyses are performed to investigate the influence of key parameters concerning energy resources prices, investment costs, and rooftop area. The analyses of the trade-off solutions verify the enormous potential for CO2 emissions reduction, which can reach 32.3% with only 1.1% higher costs by displacing cogeneration in favor of the heat pump and the electric grid. Besides, with a modest cost increase of 7.3%, photovoltaic panels are incorporated, promoting an even greater CO2 emissions reduction of 45.2%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimization and sensitivity analyses of a combined cooling, heat and power system for a residential building

  • Melo, Filipi Maciel
  • Pina, Eduardo Antonio
  • Carvalho, Monica
In the quest for a better use of energy resources, energy integration and cogeneration strategies have been employed in the industrial and commercial sectors with considerable benefits realized. However, the residential sector remains underexplored. An optimization procedure should be carried out whenever there is a need to ensure or verify the economic viability of an energy system. This study uses Mixed Integer Linear Programming to optimize the energy supply to a residential building, with 20 floors and 40 apartments, located in the city of João Pessoa (Northeast Brazil). The equipment available includes gas engines, electric and natural gas boilers, heat exchangers, cooling towers, and absorption and mechanical chillers. The optimization establishes the optimal system configuration and operational strategy (operation throughout the year). Economic, technical, and legal aspects were considered in the minimization of the total annual costs associated with the building's energy supply. The energy demands were calculated on an hourly basis, throughout one year, by the EnergyPlus software and corresponded to hot water (83 MWh/year), electricity (171 MWh/year) and cooling (242 MWh/year) demands. The optimal system was entirely reliant on the electric grid to meet the electricity demand directly and to satisfy heating and cooling demands by means of an electric hot water boiler and a mechanical chiller. The optimal solution is tested by varying, within reasonable limits, selected parameters: natural gas and electricity tariffs, the behavior of residents, amortization factor and relationship between the tariffs of electricity and natural gas.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tackling thermal integration in the synthesis of polygeneration systems for buildings

  • Pina, Eduardo A.
  • Lozano, Miguel A.
  • Ramos, José C.
  • Serra, Luis M.
A novel methodology is proposed for the synthesis of polygeneration systems in tertiary sector buildings with detailed thermal integration. The methodology involves a systematic approach that combines Pinch Analysis, mathematical programming, and the definition of a superstructure with thermal flexibility whereby mass flows can exchange heat in various temperature intervals. With the detailed characterization of the thermal energy flows associated with the thermal energy technologies and services to be supplied to the building, the optimization procedure provides a more realistic system configuration, ensures that thermodynamic principles are satisfied, and allows for synergies and potential benefits to emerge. The methodology is first introduced through a simple example of a gas engine-based energy system, highlighting the necessity of a detailed characterization of the hot and cold flows regarding their quantity and quality levels. Then, the approach is applied to the case study of a Brazilian university hospital that requires electricity, steam, hot water, and chilled water. The optimization is formulated as a multi-period mixed integer linear programming model that minimizes the total annual cost of installing and operating the system using local-based data. The results show the technical and economic interest of deploying cogeneration gas engines to cover electricity and thermal energy services. Besides, a strong synergy is observed between the cogeneration gas engine and the single-effect absorption chiller. Thus, it is demonstrated how a preliminary analysis of thermal integration opportunities must be an integral part of the optimal synthesis of energy supply systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimization of the design of polygeneration systems for the residential sector under different self-consumption regulations

  • Pinto, E.S.
  • Serra, L.M.
  • Lázaro, A.
Polygeneration systems enable natural resources to be exploited efficiently, decreasing CO2 emissions and achieving economic savings relative to the conventional separate production. However, their economic feasibility depends on the legal framework. Preliminary design of polygeneration systems for the residential sector based on the last Spanish self-consumption regulations RD 900/2015 and RD 244/2019 was carried out in Zaragoza, Spain. Both regulations were applied to individual and collective installations. Several technologies, appropriate for the energy supply to residential buildings, for example, photovoltaics, wind turbines, solar thermal collectors, microcogeneration engines, heat pump, gas boiler, absorption chiller, and thermal and electric energy storage were considered candidate technologies for the polygeneration system. A mixed integer linear programming model was developed to minimize the total annual cost of polygeneration systems. Scenarios with and without electricity sale were considered. CO2 emissions were also calculated to estimate the environmental impact. Results show that RD 900/2015 discourages the investment in self-consumption systems whereas the RD 244/2019 encourages them, especially in renewable energy technologies. Moreover, in economic terms, it is more profitable to invest in collective self-consumption installations over individual installations. However, this does not necessarily represent a significant reduction of CO2 emissions with respect to individual installations since the natural gas consumption tends to increase as its unit price decreases because of the increase of its consumption level. Thus, more appropriate pricing of natural gas in residential sector, in which its cost would not be reduced when increasing its consumption, would be required to achieve significant CO2 emissions reduction. In all cases, the photovoltaic panels (PV) are competitive and profitable without subsidies in self-consumption schemes and the reversible heat pump (HP) played an important role for the CO2 emissions reduction. In a horizon to achieve zero CO2 emissions, the net metering scheme could be an interesting and profitable alternative to be considered.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Assessing the influence of legal constraints on the integration of renewable energy technologies in polygeneration systems for buildings

  • Pina, Eduardo Antonio
  • Lozano, Miguel Ángel
  • Serra, Luis María
Hybrid polygeneration systems offer a great opportunity to meet growing energy demands with cost efficiency and environmental benefits. The identification of the optimal solution (configuration and operational strategy) is strongly affected by the relationship between the system and its surroundings. Previous studies have analyzed the influence of boundary conditions on the synthesis of polygeneration systems for buildings. However, local regulations are often disregarded or oversimplified in those studies. Therefore, this paper aims to evaluate the influence of legal conditions on the integration of renewable energy technologies in polygeneration systems for buildings. A comprehensive synthesis model is developed, including different types of legal conditions, such as power exchange modalities, subsidies/surcharges on energy prices and investment costs, and total ban on fossil fuels. Then, the model is applied to the case study of a Brazilian hospital. The current Brazilian net metering scheme is implemented. Results show that natural gas cogeneration is an attractive solution to cover the hospital's energy demands with or without the possibility of selling/exporting electricity. Also, the Brazilian net metering scheme, by itself, is not enough to ensure renewable energy deployment. An in-depth discussion about the conditions that would promote renewable energy integration is reported and recommendations are made on how current policies can be improved, including the need to explicitly address renewable technologies, the application of minimum renewable fractions, and the role of renewable heat/cooling. While the case study considers the specific circumstances in Brazil, it provides insights that can be extended to other countries or applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sustainable enhancement of district heating and cooling configurations by combining thermal energy storage and life cycle assessment

  • Guillén-Lambea, Silvia
  • Carvalho, Mónica
  • Delgado, Mónica
  • Lázaro, Ana
District heating and cooling systems are designed and optimized to respond to the latest challenges of reducing energy demands while fulfilling comfort standards. Thermal energy storage (TES) with phase change materials can be employed to reduce the energy demands of buildings. This study considers a residential district located in Spain, where a general framework has been established to identify optimal combinations of energy conversion, delivery technologies, and operating rules. The Life Cycle Assessment (LCA) methodology was implemented within a mathematical model, and the objective function considered the minimization of environmental loads. Two environmental impact assessment methods were applied within the LCA methodology: IPCC 2013 GWP 100y and ReCiPe. Four optimal configurations were considered: a reference system (gas boiler and split-type air conditioners) and then three TES-based systems: one sensible (STES, water) and two latent (LTES1—paraffin emulsion and LTES2—sodium acetate trihydrate). Hourly environmental loads associated with electricity imports from the national grid were available. The conventional energy system always presented the worst performance from an environmental viewpoint, being penalized by the high consumption of natural gas. Regarding carbon emissions, LTES1 showed the lowest emissions, followed by STES and LTES2. Reductions in energy demands compensated the impact of paraffin, and results of STES are strongly dependent on tank design. However, considering the ReCiPe method, STES presented the lowest loads, followed by LTES1 and LTES2. Overall impacts of LTES1 with paraffin are higher than STES with water, mainly due to the paraffin and the high volume required.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Research on xylitol crystallization by shearing and seeding for its use as a phase change material

  • Delgado, M.
  • Navarro, M.
  • Lázaro, A.
  • Boyer, S.A.E.
  • Peuvrel-Disdier, E.
As thermal energy storage is becoming more important, new materials are being studied. Sugar-alcohols (SA) are very promising as phase change materials (PCM) because they are non-toxic, affordable and their latent heat is high. However, undercooling and low crystallization rates are some of the problems present in these materials. The SA studied in this work is xylitol, and using a microscope connected to a transparent counter-rotating shear cell, the effect of secondary nucleation is studied, as well as the crystallization rate of xylitol and how undercooling affects it. From the results, it is deduced that a proper seed preparation and handling is needed. The crystal structure is also studied, using XRPD diffractograms and differential scanning calorimetry. © 2021 Institute of Physics Publishing. All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Environmental assessment of central solar heating plants with seasonal storage located in Spain

  • Raluy, Rosa Gemma
  • Guillén-Lambea, Silvia
  • Serra, Luis M.
  • Guadalfajara, Mateo
  • Lozano, Miguel A.
Renewable energies can play a very important role in the development of a new energy model contributing effectively towards a more sustainable development in the mid and long term. In this context Central Solar Heating Plants with Seasonal Storage (CSHPSS) are able to provide space heating and Domestic Hot Water (DHW) to residential buildings with high solar fractions (>50%). These systems are already being used in Central and Northern Europe, as well as in Canada, where there is an important experience in district heating systems. The study presented herein presents an environmental assessment, applying the Life Cycle Assessment (LCA) method, of a CSHPSS, which should cover the space heating and DHW demand of 500 dwellings of 100 m2, located in Zaragoza, Spain. Environmental burdens through the life cycle of the system are estimated based on greenhouse gas emissions, and comprehensive environmental indicators as the ReCiPe and Cumulative Energy Demand (CED). These indicators allow to evaluate the reduction of the environmental load achieved by the CSHPSS analyzed with respect to conventional space heating and DHW systems, as well as to identify the most critical aspects from the environmental perspective. In this article, the environmental behavior of the CSHPSS is decoupled into the two demands covered, heating and DHW, in order to quantify the environmental impact of each generation system. A detailed life cycle inventory is presented with the aim of promoting the development of increasingly efficient technologies from the environmental point of view, not only in the operation phase but also in the construction of the equipment. Furthermore, an in-depth analysis is performed to evaluate the variation of the environmental impact depending on the climatic conditions. The CSHPSS is also dimensioned in different Spanish cities and a LCA is carried out for nine locations. The results can help different stakeholders to make decisions in order to optimize the renewable energy generation systems taking in account its whole life cycle and to point out the necessity to evaluate the environmental impact essentially in the production phase for all renewable energy systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Opportunities and economic assessment for a third-party delivering electricity, heat and cold to residential buildings

  • Pinto, Edwin S.
  • Gronier, Timothé
  • Franquet, Erwin
  • Serra, Luis M.
In the present context of energy transition towards a carbon neutral society, residential sector plays an important role to combat climate change since it represents about 40% of the global final energy consumption and 30% of direct CO2eq emissions in the European Union. Polygeneration systems, facilitating the integration of renewable energies, are a feasible alternative enabling efficient use of natural resources with low environmental impact. This work analyzes the economic viability, in terms of net present value (NPV), and environmental benefit (CO2eq emissions) of an energy supplier company playing the role of an aggregator for both demand and supply. As an owner of a polygeneration system, optimally designed through a MILP approach, it delivers various energy services (electricity, space heating, domestic hot water and cold) to several customers (50 dwellings). The analysis is performed, considering three different business models, in two different locations, Zaragoza (Spain) and Marseille (France), with different energy demands, energy mixes and energy regulations. The optimal configuration obtained, consisting of cogeneration module, PV, reversible heat pump, boiler and thermal energy storage has shown to be very resilient and cost-effective in the scenarios analyzed. Results indicate that the proposed scheme represents an added value for both the supplier company (aggregator), with a positive, and the final customers (owing savings greater than 30%), with significant reduction of CO2eq emissions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

A critical review of the greenhouse gas emissions associated with parabolic trough concentrating solar power plants

  • Guillén-Lambea, S.
  • Carvalho, M.
Numerous research studies have focused on the Life Cycle Assessment (LCA) of solar energy systems, and more concretely, within the last decade, on the environmental performance of parabolic trough solar power plants. Due to ever-increasing global energy demands, the optimization of energy solutions to reduce adverse environmental impacts has been attracting research efforts. The study presented herein reports on the environmental perspective of parabolic through concentrated solar power (CSP) plants, focusing on greenhouse gas emissions. Existing studies on the environmental impacts of parabolic trough CSP plants show significant differences regarding the scope and frontiers of the LCA, database employed, raw materials, lifetime of the CSP plant, and temporal assumptions. The convergences and divergences appearing in the most relevant papers are recompiled, disaggregated by system and LCA phase, identifying the parameters with higher impacts and calculating the influence on environmental issues. The scientific literature review carried out demonstrated a knowledge gap on inventory data for parabolic trough CSP plants. This study provides a framework for the establishment of energy policies and standards, along with data for the environmental optimization of parabolic trough CSP plants.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Energy communities approach applied to optimize polygeneration systems in residential buildings: Case study in Zaragoza, Spain

  • Pinto, E. S.
  • Serra, L. M.
  • Lázaro, A.
The residential sector plays an important role to combat climate change. It requires alternatives to reduce its energy consumption and greenhouse gases emissions. Thus, polygeneration systems are a suitable alternative enabling efficient use of natural resources with low environmental impact. On the other hand, microgrids are considered a key component for improving power reliability and quality, besides they offer resilient and viable solution for integrating renewable energy sources at a large scale. Accordingly, this paper proposes an approach for the design of polygeneration systems for residential buildings considering them not only as a microgrid but as a smart energy system. A Mixed Integer Linear Programming (MILP) model was developed for the optimization of polygeneration systems considering different constraints which allow the energy system to work as a microgrid. Different thermal and electrical technologies where evaluated under different conditions, finding affordable and sustainable configurations and interesting synergies between technologies. Results show the importance to consider both thermal and electrical demands and technologies simultaneously for the design of energy systems. It is highlighted the displacement of batteries by thermal energy storage to achieve more cost-effective solutions in contrast to the current tendency to uphold battery systems as the key for future energy systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Intercomparative tests on viscosity measurements of phase change materials

  • Delgado, M.
  • Lázaro, A.
  • Biedenbach, M.
  • Gamisch, S.
  • Gschwander, S.
  • Höhlein, S.
  • König-Haagen, A.
  • Brüggemann, D.
Phase change materials (PCM) are capable of storing thermal energy within a small temperature range due to their high latent heat. When designing a thermal energy storage (TES) system with PCMs, besides the phase change enthalpy, thermal conductivity and density, viscosity based on temperature must be characterized to take into account natural convection. Taking advantage of the facilities of the different research groups working within an international network, a set of intercomparative tests were executed to determine the viscosity based on the temperature of two PCMs: octadecane and the commercial paraffin RT70 HC. Three laboratories have participated, which have used three different rheology equipments: two controlled stress rheometers, AR-G2 from TA Instruments and MCR 502 from Anton Paar and a translational rheometer, IMETER. The intercomparative tests were executed based on a starting methodology approach defined previously by some of the authors. The highest deviations were observed when temperature-controlled geometries or temperature hoods were not used at elevated test temperatures due to the temperature gradients within the sample, as consequence of the heat losses due to the room temperature. Consequently, special attention must be focused on the temperature control, since a uniform temperature throughout the sample should be guaranteed.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Energy communities approach applied to optimize polygeneration systems in residential buildings: case study in Zaragoza, Spain

  • Pinto Maquillon, Edwin Samir
  • Serra de Renobales, Luis María
  • Lázaro Fernández, Ana
The residential sector plays an important role to combat climate change. It requires alternatives to reduce its energy consumption and greenhouse gases emissions. Thus, polygeneration systems are a suitable alternative enabling efficient use of natural resources with low environmental impact. On the other hand, microgrids are considered a key component for improving power reliability and quality, besides they offer a viable solution for integrating renewable energy sources at a large scale. Accordingly, this paper proposes an approach for the design of polygeneration systems for residential buildings considering them not only as a microgrid but as a smart energy system. A Mixed Integer Linear Programming (MILP) model was developed for the optimization of polygeneration systems considering different constraints which allow the energy system to work as a microgrid. Different thermal and electrical technologies where evaluated under different conditions, finding affordable and sustainable configurations and interesting synergies between technologies. Results show the importance to consider both thermal and electrical demands and technologies simultaneously for the design of energy systems. It is highlighted the displacement of batteries by thermal energy storage to achieve more cost-effective solutions in contrast to the current tendency to uphold battery systems as the key for future energy systems., This work was developed in the frame of the research projects ENE2017-87711-R and PID2020-15500RB-I00, partially funded by the State Research Agency (SRA), the Government of Aragon (Ref: T55- 20R), and the European Regional Development Fund (ERDF). The corresponding author also acknowledges the Margarita Salas grant funded by the Europe Union-NextGenerationEU and the Ministry of Universities of Spain., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Opportunities and economic assessment for a third-party delivering electricity, heat and cold to residential buildings

  • Pinto Maquillon, Edwin Samir
  • Gronier, Timothé
  • Franquet, Erwin
  • Serra de Renobales, Luis María
In the present context of energy transition towards a carbon neutral society, residential sector plays an important role to combat climate change since it represents about 40% of the global final energy consumption and 30% of direct CO emissions in the European Union. Polygeneration systems, facilitating the integration of renewable energies, are a feasible alternative enabling efficient use of natural resources with low environmental impact. This work analyzes the economic viability, in terms of net present value (), and environmental benefit (CO emissions) of an energy supplier company playing the role on an aggregator for both demand and supply. As an owner of a polygeneration system, optimally designed through a MILP approach, it delivers various energy services (electricity, space heating, domestic hot water and cold) to several customers (50 dwellings). The analysis is performed, considering three different business models, in two different locations, Zaragoza (Spain) and Marseille (France), with different energy demands, energy mixes and energy regulations. The optimal configuration obtained, consisting of cogeneration module, PV, reversible heat pump, boiler and thermal energy storage has shown to be very resilient and cost-effective in the scenarios analyzed. Results indicate that the proposed scheme represents an added value for both the supplier company (aggregator), with a positive , and the final customers (owing savings greater than 30%), with significant reduction of CO emissions., This work was developed in the frame of the research project ENE2017-87711-R, partially funded by the Spanish Government (Energy Program), the Government of Aragon (Ref: T55-20R), Spain, and the EU Social Fund (FEDER Program 2014-2020 "Building Europe from Aragon"). The authors also want to acknowledge the mobility program for Latin-Americans offered by Unizar-Santander Universities and to the Erasmus mobility program. The project leading to this publication has also received funding from Excellence Initiative of Université de Pau et des Pays de l’Adour – I-Site E2S UPPA, a French “Investissements d’Avenir” program., Postprint (author's final draft)