Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maximizing customers&apos, lifetime value using limited marketing resources

  • Marmol, Mage
  • Goyal, Anita
  • Copado-Méndez, Pedro Jesus
  • Panadero, Javier
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] Purpose For any given customer, his/her profitability for a business enterprise can be estimated by the so-called customer lifetime value (CLV). One specific goal for many enterprises consists in maximizing the aggregated CLV associated with its set of customers. To achieve this goal, a company uses marketing resources (e.g. marketing campaigns), which are usually expensive. Design/methodology/approach This paper proposes a formal model of the Customer Life Value problem inspired by the uncapacitated facility location problem. Findings The computational experiments conducted by the authors illustrate the potential of the approach when compared with a standard (non-algorithm-supported) one. Originality/value The approach leads up to the economic trade-off between the volume of the employed resources and the aggregated CLV, i.e. the higher the number of resources utilized, but also the higher the cost of achieving this level of lifetime value. Hence, the number of resources to be "activated" has to be decided, and the effect of each of these resources on each CLV will depend upon how "close" the resource is from the corresponding customer (i.e. how large will the impact of the active resource on the customer)., This paper has been partially supported by the Catalan Department of Agriculture, Livestock, Fisheries and Food (56.21.003.2019.2A), AGAUR and FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Studying the influence of surface properties on the cell attachment and anti-fouling capacity of Ag/SiO2 superhydrophobic coatings for building materials

  • Zarzuela, Rafael
  • Carbú, María
  • Moreno-Garrido, Ignacio
  • Diaz, Ana
  • Cantoral, Jesús M.
  • Almoraima Gil, M.L.
  • Mosquera, María J.
  • Domínguez-Rodríguez, Marcia|||0000-0002-0635-0699
[EN] Anti-fouling coatings are a common solution for the protection of porous building materials from the effects of microbial colonization over their functionality and durability. Usually, this is achieved through the incorporation of biocides or the passive control by reducing bioreceptivity. Superhydrophobic surfaces are considered a promising strategy due to their reported capacity for reducing cell adhesion, but their affinity to non-polar substances may decrease their effectiveness under the right circumstances (e.g. organic contamination, cell walls with hydrophobic domains). The combination of these surfaces with active biocides may compensate these drawbacks, however, a close contact with the microorganisms is necessary to promote their effect.This work studies the factors that determine the anti-fouling capacity of a coating, tested on porous building materials, that combines superhydrophobic surface with a nanostructured Ag/SiO2 biocide agent. Special attention is paid to understanding to which extent the cell-surface interactions modulate the initial cell attachment to the surface and the biocidal effect. To this end, the electrostatic forces and surface energy balance were considered using different reference bacteria and a yeast. The results indicate that the hydrophobic character of the surface favors the cell attachment and the biocide agent may be unable to fully compensate this effect for all microorganisms. In addition, changes in micro and nano roughness seem to play an equally significant role. Overall, this study aims to provide a theoretical and experimental insight to assist in the future design of anti-fouling coatings tailored to the organisms responsible of fouling processes., This work has been financed by the Spanish State Research Agency (MCIN/AEI/ 10.13039/501100011033) R&D programs 2020 2021 (Project references: PID2020-115843RB-I00 and PDC2021-121652-I00); This work has been co-financed by the European Union under the 2014 2020 ERDF Operational Programme and by the Department of Economic Transformation, Industry, Knowledge, and Universities of the Regional Government of Andalusia (Project reference: FEDER- UCA18-106613)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Signature and Log-Signature for the Study of Empirical Distributions Generated with GANs

  • de Curtò, J.
  • de Zarzà, I.
  • Roig, Gemma
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] In this paper, we address the research gap in efficiently assessing Generative Adversarial Network (GAN) convergence and goodness of fit by introducing the application of the Signature Transform to measure similarity between image distributions. Specifically, we propose the novel use of Root Mean Square Error (RMSE) and Mean Absolute Error (MAE) Signature, along with Log-Signature, as alternatives to existing methods such as Fréchet Inception Distance (FID) and Multi-Scale Structural Similarity Index Measure (MS-SSIM). Our approach offers advantages in terms of efficiency and effectiveness, providing a comprehensive understanding and extensive evaluations of GAN convergence and goodness of fit. Furthermore, we present innovative analytical measures based on statistics by means of Kruskal--Wallis to evaluate the goodness of fit of GAN sample distributions. Unlike existing GAN measures, which are based on deep neural networks and require extensive GPU computations, our approach significantly reduces computation time and is performed on the CPU while maintaining the same level of accuracy. Our results demonstrate the effectiveness of the proposed method in capturing the intrinsic structure of the generated samples, providing meaningful insights into GAN performance. Lastly, we evaluate our approach qualitatively using Principal Component Analysis (PCA) and adaptive t-Distributed Stochastic Neighbor Embedding (t-SNE) for data visualization, illustrating the plausibility of our method., This work was supported by the HK Innovation and Technology Commission (InnoHK Project CIMDA). We acknowledge the support of R&D project PID2021-122580NB-I00, funded by MCIN/AEI/10.13039/501100011033 and ERDF. We thank the following funding sources from GOETHE-University Frankfurt am Main; DePP Dezentrale Plannung von Platoons im Straßengüterverkehr mit Hilfe einer KI auf Basis einzelner LKW and Center for Data Science & AI .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Innovative solutions and challenges to increase the use of poly(3-hydroxybutyrate) in food packaging and disposables

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Arrieta, Marina P.
[EN] Poly(3-hydroxybutyrate) (PHB) has gain in recent years a huge interest in the food packaging field due to its renewable origin from waste as well as non-food crops, high mechanical strength, medium-to-high barrier performance, and inherent biodegradability in natural environments. Despite these advantages, PHB also shows a narrow processing window and high brittleness since this homopolyester shows low thermal stability and high crystallinity, limiting its industrial application. The present review provides an updated state of the art of the most relevant aspects in terms of processing and properties of PHB materials with a particular emphasis for their use in sustainable food packaging. It also describes the most potential strategies that can be applied to improve both the processability and mechanical properties of PHB, including the melt blending with green plasticizers and flexible biodegradable polymers as well as the development of more ductile co-polyesters. Finally, the waste management of the newly developed PHB-based articles is discussed, from their potential compostability to develop more biopolymers to more economically favored alternatives such as mechanical and chemical recycling technologies., This work was funded by the Spanish Ministry of Science and Innovation (MICINN, Spain), grant PID2021-123753NA-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the "European Union"; Comunidad de Madrid (Spain) by CIRCULAGROPLAST, a research Project that has been funded by the Comunidad de Madrid through the call Research Grants for Young Investigators from Universidad Politécnica de Madrid; as well as by the Generalitat Valenciana (Spain) through the BEST Program (CIBEST/2021/94). S. Torres-Giner acknowledges the Spanish Ministry of Science and Innovation (MICINN, Spain) for his Ramón y Cajal contract (RYC2019-027784-I).