Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Study of Early Stages in the Growth of Boron-Doped Diamond on Carbon Fibers

  • Millán Barba, Josué
  • Gutiérrez Peinado, Marina
  • Lloret Vieira, Fernando Manuel
  • Guzmán de Villoria, Roberto
  • Alcántara Puerto, Rodrigo
  • Haenen, Ken
  • Araújo Gay, Daniel
With the aim to improve the properties of aeronautical carbon fiber (CF)-reinforced polymer materials, boron-doped diamond (BDD) has been grown on commercial CFs by microwave plasma-enhanced chemical vapor deposition. The growth of a BDD layer on CF is expected to increase the mechanical, electrical, and thermal conductivities of the composite. The present contribution reports the different growth stages and their associated nanostructures of the BDD/CF resulting system using transmission electron microscopy, scanning electron microscopy, and Raman spectroscopy. The revealed carbon nanostructure shows four steps of growth with the following characteristics: 1) transitional interlayer, 2) graphite nanowall, 3) cauliflower-like nanocrystalline diamond, and 4) microcrystalline diamond.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Low temperature growth of nanocrystalline diamond: Insight thermal property

  • Millán Barba, Josué
  • Taylor, A.
  • Bakkali, H.
  • Alcántara Puerto, Rodrigo
  • Lloret Vieira, Fernando Manuel
  • Domínguez de la Vega, Manuel
  • Mortet, V.
  • Gutiérrez Peinado, Marina
  • Araújo Gay, Daniel
  • Guzmán de Villoria, R.
One of the limitations of materials for high-power devices and structural coatings applications is heat dissipation. Diamond is a suitable material for heat distribution due to its high thermal conductivity. Nevertheless, it is usually grown at high temperature (800–1200 ◦C), which limits its use as a coating for substrates vulnerable to degradation at high temperatures. In this work, it is studied the effect of the distance between the plasma source and substrate on the growth of nanocrystalline diamond layers on silicon substrates at low temperature (<450 ◦C) by microwave linear antenna plasma enhanced chemical vapour deposition (MW-LA-PECVD) in pulse mode. The nanocrystalline diamond films have been analysed by scanning electron microscopy (SEM), atomic force microscopy (AFM) and Raman spectroscopy. Finally, the superficial thermal conductivity of the diamond layers was determined by scanning thermal microscopy-AFM (SThM-AFM)., 6 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Non-volatile tuning of normally-on and off states of deep depletion ZrO2/O-terminated high voltage diamond MOSFET

  • Soto Portillo, Beatriz
  • Couret, M.
  • Cañas Fernández, Jesús
  • Castelan, A.
  • Rouger, N.
  • Araújo Gay, Daniel
  • Villar Castro, María del Pilar
  • Pernot, J.
Based on the stability of the deep depletion regime in diamond and the outstanding properties of this promising material for its use in power devices, p-channel deep depletion metal oxide semiconductor field effect transistors were fabricated on a (001) Ib nitrogen-doped high pressure high temperature diamond substrate. Taking advantage of the new concept of the non-volatile diamond-based photo switch, it is demonstrated that it is possible to tune the normally-on and normally-off states of the transistor by configuring the pn-junction space charge region. The devices under study was designed following an interdigital-like and a circular-like architectures presenting low threshold voltages (between 3 V and −3 V), an on/off ratio of 107 and a critical electric field numerically assessed of 9 MV.cm−1 at room temperature. This new degree of freedom opens the route for diamond based power electronics., 8 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

High phosphorous incorporation in (100)-oriented MP CVD diamond growth

  • Lloret Vieira, Fernando Manuel
  • Soto Portillo, Beatriz
  • Gutiérrez Peinado, Marina
  • Haenen, Ken
  • Araújo Gay, Daniel
Diamond n-type layers are crucial for the development of a new bipolar diamond-based electronic technology. However, the difficulties to incorporate impurity atoms into the diamond lattice make its growth a stage of technological research still in progress. Phosphorus doping has been carried out successfully on (111)-oriented diamond substrates, reaching high concentrations and good reproducibility. Nevertheless, such reproducible results have not been obtained for the (100) growth orientations yet, even though the (100) substrate orientation is still the most used diamond substrate for electronic applications. In this study, three samples are grown by microwave plasma-enhanced chemical vapor deposition on diamond (100)-oriented high pressure high temperature substrates. All samples are deposited with the same growth conditions except methane, which was varied between 1.5 % and 3.5 %. A different growth mechanism is observed for each of the methane content used. The step flow growth mechanism shows increased phosphorus incorporation, determined by cathodoluminescence (CL) in cross sectional view in focused ion beam preparations. This sample also shows a less rough surface and no crystal defects observable by transmission electron microscopy (TEM). That is why these growth conditions are used for the fabrication of the n-type layer of a p+/p−/n stack. Ellipsometry and TEM measurements on this sample yield a high growth rate of 3.5 μm/h with a phosphorus concentration of 4 × 1017 cm−3, estimated by CL spectroscopy. The sample shows a low density of surface defects, observed by optical microscopy. However, TEM observations show dislocations with 1/2 a〈110〉 burger vector and stacking faults with 1/3 〈111〉 displacement vector. © 2023 The Author(s)
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Boron-doped diamond growth on carbon fibre: Enhancing the electrical conductivity

  • Millán Barba, Josué
  • Bakkali, Hicham
  • Lloret Vieira, Fernando Manuel
  • Gutiérrez Peinado, Marina
  • Guzmán de Villoria, R.
  • Domínguez de la Vega, Manuel
  • Haenen, Ken
  • Araújo Gay, Daniel
Carbon fibre reinforced polymers (CRFP) are extensively used in many industrial applications thanks to its mechanical properties and its low weight. Nevertheless, the orthotropic character of CRFP highly reduces its applications. The transversal electrical conductivity in CRFP is two orders poorer than in the longitudinal direction. To improve their electrical properties, this work proposes the use of polycrystalline boron doped diamond (BDD) as coating of the carbon fibres (CF). BDD coating is deposited on CF surface using microwave plasma enhanced chemical vapor deposition (MPCVD) system. The BDD coating forms a rigid conductive coating around the CF as a core–shell structure. Here, an electrical characterization of both, 12,000 filaments (a tow) and a single coated filament, are carried out in the longitudinal and cross-section directions. Macro, micro and local analysis using the Kelvin method, Conductive Atomic Force Microscopy (C-AFM), and Scanning Microwave Impedance Microscopy (sMIM), were carried out to evidence the improvement of the electrical properties. Macro measurement reveals that the BDD coating decreases to half the resistivity of the CF. The BDD coating raises the local electrical conductivity of the CF by an order of magnitude with respect to the uncoated ones. sMIM maps identified BDD locations in ring-like configurations. © 2023 The Authors
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Diamond for Electronics: Materials, Processing and Devices

  • Araújo Gay, Daniel
  • Suzuki, Mariko
  • Lloret Vieira, Fernando Manuel
  • Alba Muñoz, Gonzalo
  • Villar Castro, María del Pilar
Progress in power electronic devices is currently accepted through the use of wide bandgap materials (WBG). Among them, diamond is the material with the most promising characteristics in terms of breakdown voltage, on-resistance, thermal conductance, or carrier mobility. However, it is also the one with the greatest difficulties in carrying out the device technology as a result of its very high mechanical hardness and smaller size of substrates. As a result, diamond is still not considered a reference material for power electronic devices despite its superior Baliga's figure of merit with respect to other WBG materials. This review paper will give a brief overview of some scientific and technological aspects related to the current state of the main diamond technology aspects. It will report the recent key issues related to crystal growth, characterization techniques, and, in particular, the importance of surface states aspects, fabrication processes, and device fabrication. Finally, the advantages and disadvantages of diamond devices with respect to other WBG materials are also discussed., The authors thank the Ministerio de Economia y Competitividad (MINECO) of the Spanish Government for funding under Grant Nos. TEC2017-86347-C2-1-R, ESP2017-91820, PID2020-117201RB-C21, and PID2019-110219RB-100 and the Junta de Andalucia (Andalusian Government, Spain) for funding through Nos. P20_00946, FEDER-UCA18- 106470 and FEDER-UCA18-107851 projects.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Influence of the Algorithmization Process on the Mathematical Competence: A Case Study of Trainee Teachers Assessing ABN- and CBC-Instructed Schoolchildren by Gamification

  • Piñero Charlo, José Carlos
  • Noriega Bustelo, Rocío
  • Canto López, María del Carmen
  • Costado Dios, María Teresa
In this manuscript, schoolchild mathematical competencies have been assessed by using educational gamification methodologies; specifically, Educational Escape Rooms (EER). To ease the interpretation of results, Spanish schoolchildren trained by using two different methodologies (ABN and CBC) were selected to participate in the experience. The gamified environment used as assessment tool was co-designed by trainee teachers, on-service teachers, and university researchers. The design was implemented in different educational centers and the results were transcribed to deliver a didactic analysis. Among the findings of this study, we uncovered: (i) the reduction of the math anxiety, (ii) the different performance of the schoolchild involved-ABN students show an additional and positive 10% development of certain mathematical competences-and (iii) a positive didactic-mathematic development of the participant trainee teachers.