Pasar al contenido principal

NUEVOS CONFIGURACIONES DE PUERTAS PARA MISFETS DE DIAMANTE CON CANAL OPTO-ACTIVADO :CRECIMIENTO Y CARACTERIZACION

PID2020-117201RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Existence of a capacity solution to a nonlinear parabolic–elliptic coupled system in anisotropic Orlicz-Sobolev spaces

  • Ortegón Gallego, Francisco
  • Ouyahya, Hakima
  • Rhoudaf, Mohamed
In this work, we show the existence of a capacity solution for a nonlinear coupled parabolic–elliptic system in inhomogeneous anisotropic Orlicz-Sobolev spaces without assuming the Δ2-condition on the N-functions. This system describes the heat surge generated within a semiconductor device by an electrical direct current. This may be seen as a generalization of the so-called thermistor problem.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

FIB in-situ fabrication of pseudo vertical diamond Schottky diode: H-terminated ohmic contact and O-terminated Schottky barrier

  • Valendolf Nunes, Jackeline
  • Leinen, D.
  • Alba Muñoz, Gonzalo
  • Lloret Vieira, Fernando Manuel
  • Piñero Charlo, José Carlos
  • Suzuki, Mariko
  • Araújo Gay, Daniel
Among diamond-based devices, the Schottky barrier diode (SBD) shows significant promise, achieving high breakdown voltages (9.5 MV⋅cm ) and reduced serial resistance (1 Ω) through structural advancements. The performance of SBDs depends on the interface between the Schottky contact, surface termination, and diamond. Studies have highlighted the impact of interface configuration on Schottky barrier height (SBH), particularly for hydrogen (H) and oxygen (O)-terminated diamonds. H-terminated surfaces exhibit negative electron affinity (NEA), whereas O-terminated surfaces show positive electron affinity (PEA). This surface behaviour has a strong impact on electron affinity, surface conductivity, work function, and the SBH which are critical for device performance. To know more about the metal-surface-diamond interface, tungsten (W) and platinum (Pt) deposited by electron beam-induced deposition (EBID), in a FIB dual beam, were employed as Schottky contacts on H and O-terminated diamond. The resulting structure has a pseudo vertical configuration with a back ohmic contact on a p ++ boron-doped layer. The current–voltage (I-V) and X-ray photoelectron spectroscopy (XPS) measurements resulted in a SBH of 1.69 eV for W and 1.76 eV for Pt, with an ideal factor (n) of 1.22 and 1.18, respectively. These n values demonstrated a chemical reactivity between metal-surface-diamond. Finally, a combination of two techniques for the SBH estimation is discussed.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Low temperature growth of nanocrystalline diamond: Insight thermal property

  • Millán Barba, Josué
  • Taylor, A.
  • Bakkali, H.
  • Alcántara Puerto, Rodrigo
  • Lloret Vieira, Fernando Manuel
  • Domínguez de la Vega, Manuel
  • Mortet, V.
  • Gutiérrez Peinado, Marina
  • Araújo Gay, Daniel
  • Guzmán de Villoria, R.
One of the limitations of materials for high-power devices and structural coatings applications is heat dissipation. Diamond is a suitable material for heat distribution due to its high thermal conductivity. Nevertheless, it is usually grown at high temperature (800–1200 ◦C), which limits its use as a coating for substrates vulnerable to degradation at high temperatures. In this work, it is studied the effect of the distance between the plasma source and substrate on the growth of nanocrystalline diamond layers on silicon substrates at low temperature (<450 ◦C) by microwave linear antenna plasma enhanced chemical vapour deposition (MW-LA-PECVD) in pulse mode. The nanocrystalline diamond films have been analysed by scanning electron microscopy (SEM), atomic force microscopy (AFM) and Raman spectroscopy. Finally, the superficial thermal conductivity of the diamond layers was determined by scanning thermal microscopy-AFM (SThM-AFM)., 6 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Non-volatile tuning of normally-on and off states of deep depletion ZrO2/O-terminated high voltage diamond MOSFET

  • Soto Portillo, Beatriz
  • Couret, M.
  • Cañas Fernández, Jesús
  • Castelan, A.
  • Rouger, N.
  • Araújo Gay, Daniel
  • Villar Castro, María del Pilar
  • Pernot, J.
Based on the stability of the deep depletion regime in diamond and the outstanding properties of this promising material for its use in power devices, p-channel deep depletion metal oxide semiconductor field effect transistors were fabricated on a (001) Ib nitrogen-doped high pressure high temperature diamond substrate. Taking advantage of the new concept of the non-volatile diamond-based photo switch, it is demonstrated that it is possible to tune the normally-on and normally-off states of the transistor by configuring the pn-junction space charge region. The devices under study was designed following an interdigital-like and a circular-like architectures presenting low threshold voltages (between 3 V and −3 V), an on/off ratio of 107 and a critical electric field numerically assessed of 9 MV.cm−1 at room temperature. This new degree of freedom opens the route for diamond based power electronics., 8 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Existence of a solution and its numerical approximation for a strongly nonlinear coupled system in anisotropic Orlicz-Sobolev spaces

  • Ortegón Gallego, Francisco
  • Ouyahya, Hakima
  • Rhoudaf, Mohamed
We study the existence of a capacity solution for a nonlinear elliptic coupled system in anisotropic Orlicz-Sobolev spaces. The unknowns are the temperature inside a semiconductor material, and the electric potential. This system may be considered as a generalization of the steady-state thermistor problem. The numerical solution is also analyzed by means of the least squares method in combination with a conjugate gradient technique., Ministerio de Ciencia e Innovación [PID2020-117201RB-C21] y Consejería de Transformación Económica, Industria, Conocimiento y Universidades de la Junta de Andalucía [UAL2020-FQM-B2046], en los dos casos, con la participación del Fondo Europeo de Desarrollo Regional (ERDF/FEDER)., 32 páginas.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

High phosphorous incorporation in (100)-oriented MP CVD diamond growth

  • Lloret Vieira, Fernando Manuel
  • Soto Portillo, Beatriz
  • Gutiérrez Peinado, Marina
  • Haenen, Ken
  • Araújo Gay, Daniel
Diamond n-type layers are crucial for the development of a new bipolar diamond-based electronic technology. However, the difficulties to incorporate impurity atoms into the diamond lattice make its growth a stage of technological research still in progress. Phosphorus doping has been carried out successfully on (111)-oriented diamond substrates, reaching high concentrations and good reproducibility. Nevertheless, such reproducible results have not been obtained for the (100) growth orientations yet, even though the (100) substrate orientation is still the most used diamond substrate for electronic applications. In this study, three samples are grown by microwave plasma-enhanced chemical vapor deposition on diamond (100)-oriented high pressure high temperature substrates. All samples are deposited with the same growth conditions except methane, which was varied between 1.5 % and 3.5 %. A different growth mechanism is observed for each of the methane content used. The step flow growth mechanism shows increased phosphorus incorporation, determined by cathodoluminescence (CL) in cross sectional view in focused ion beam preparations. This sample also shows a less rough surface and no crystal defects observable by transmission electron microscopy (TEM). That is why these growth conditions are used for the fabrication of the n-type layer of a p+/p−/n stack. Ellipsometry and TEM measurements on this sample yield a high growth rate of 3.5 μm/h with a phosphorus concentration of 4 × 1017 cm−3, estimated by CL spectroscopy. The sample shows a low density of surface defects, observed by optical microscopy. However, TEM observations show dislocations with 1/2 a〈110〉 burger vector and stacking faults with 1/3 〈111〉 displacement vector. © 2023 The Author(s)
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Transport mechanism in O-terminated diamond/ZrO2 based MOSCAPs

  • Soto Portillo, Beatriz
  • Cañas, J.
  • Villar Castro, María del Pilar
  • Araújo Gay, Daniel
  • Pernot, Julien
Metal Oxide Semiconductor capacitors were fabricated using p-type O-terminated (001) diamond and zirconium dioxide deposited by atomic layer deposition at low temperature (100 ◦C). X-ray diffraction and transmission electron microscopy evidence monoclinic structure and polycrystalline nature of the oxide layer. I-V, C–V and C–F experiments have been performed in a large frequency range, i.e. from 1 Hz to 1 MHz, in order to analyse the electrical properties of the metal/dielectric/diamond stack. The presence of charges in the oxide and interface states induces a flat-band voltage shift in the C–V curve and a strong Fermi level pinning effect. A leakage current mechanism considering the correlation of the microstructural characterization and the electrical response is proposed., The authors would like to thank the Ministerio de Economia y Competitividad (MINECO) of the Spanish Government for funding under Grant No. TEC2017-86347-C2-1-R (DiamMOS project) and from ESP2017 91820 and PID2019 -110219RB-100, PID2020-117201RB-C21 projects. The authors would also thank the Junta de Andalucía (Comunidad Autónoma of Andalusia Government, Spain) for funding from FEDER-UCA18-106470, FEDER-UCA18-107851 and P20-00946 projects and as well as the grants for stays in research centres from the Promotion Programme of Research Activity of the University of Cadiz. In addition the authors acknowledge the expertise and support on different techniques allowing device fabrication (laser lithography and ALD) and characterization (XRD) of: Bruno Fernandez (Nanofab, Inst. Néel, CNRS, Grenoble), Laurent Cagnon and Eric Mossang (Inst. Néel, CNRS, Grenoble). The authors also thank to IMEYMAT (University of Cádiz) for the TEM facilities used in the microstructural characterization.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Smart Cut Transfer of Wide-Bandgap Materials: The Case of Diamond

  • Widiez, Julie
  • Chrétien, Jérémie
  • Masante, Cédric
  • Gilles, Pierrick
  • Piñero Charlo, José Carlos
  • Milesi, Frédéric
  • Fernández de los Reyes, Daniel
  • Lloret Vieira, Fernando Manuel
  • Colonel, Lucas
  • Mazen, Frédéric
  • Araújo Gay, Daniel
  • Le Van Jodin, Lucie
Diamond exhibits a unique combination of exceptional properties, making it a highly attractive material for advanced technologies. Yet, these outstanding characteristics come at a cost: Diamond remains difficult to fabricate and is not readily available in large formats. In this context, the well-known Smart Cut layer transfer process—based on ion implantation and annealing—has been adapted for the first time to diamond. Turning a limitation into an advantage, the metastable nature of diamond allows for reducing the thermal budget required for cleavage. By finely tuning the implantation conditions, a buried sp2-rich layer can be created to serve as a fracture plane. Using this method, we successfully transfer an ~800-nm-thick diamond film onto a silicon substrate via metal bonding. After plasma etching of the residual sp2-rich layer, the transferred diamond preserves good crystalline quality, as confirmed by transmission electronic microscopy (TEM), electron energy loss spectroscopy (EELS), nanobeam diffraction, and Raman spectroscopy. While some implantation-induced point defects remain, they may be mitigated by a post-transfer annealing step. These results show that Smart Cut can be extended to ultrahard and chemically inert materials like diamond. This opens new perspectives for cost-effective, epi-ready diamond substrates on engineered hosts, paving the way for future high-performance electronics and quantum technologies.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Boron-doped diamond growth on carbon fibre: Enhancing the electrical conductivity

  • Millán Barba, Josué
  • Bakkali, Hicham
  • Lloret Vieira, Fernando Manuel
  • Gutiérrez Peinado, Marina
  • Guzmán de Villoria, R.
  • Domínguez de la Vega, Manuel
  • Haenen, Ken
  • Araújo Gay, Daniel
Carbon fibre reinforced polymers (CRFP) are extensively used in many industrial applications thanks to its mechanical properties and its low weight. Nevertheless, the orthotropic character of CRFP highly reduces its applications. The transversal electrical conductivity in CRFP is two orders poorer than in the longitudinal direction. To improve their electrical properties, this work proposes the use of polycrystalline boron doped diamond (BDD) as coating of the carbon fibres (CF). BDD coating is deposited on CF surface using microwave plasma enhanced chemical vapor deposition (MPCVD) system. The BDD coating forms a rigid conductive coating around the CF as a core–shell structure. Here, an electrical characterization of both, 12,000 filaments (a tow) and a single coated filament, are carried out in the longitudinal and cross-section directions. Macro, micro and local analysis using the Kelvin method, Conductive Atomic Force Microscopy (C-AFM), and Scanning Microwave Impedance Microscopy (sMIM), were carried out to evidence the improvement of the electrical properties. Macro measurement reveals that the BDD coating decreases to half the resistivity of the CF. The BDD coating raises the local electrical conductivity of the CF by an order of magnitude with respect to the uncoated ones. sMIM maps identified BDD locations in ring-like configurations. © 2023 The Authors
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Increase of power leads to a bilateral solution to a strongly nonlinear elliptic coupled system

  • Ortegón Gallego, Francisco
  • Rhoudaf, Mohamed
  • Talbi, Hajar
In this paper, we analyze the following nonlinear elliptic problem A (u) = ρ (u) | φ | 2 in ω, div (ρ (u) φ) = 0 in ω, u = 0 on ω, φ = φ 0 on ω. $\begin{cases}A\left(u\right)=\rho \left(u\right)\vert \nabla \varphi {\vert }^{2}\,\text{in}\,{\Omega},\quad \hfill \\ \text{div}\left(\rho \left(u\right)\nabla \varphi \right)=0\,\text{in}\,{\Omega},\quad \hfill \\ u=0\,\text{on}\,\partial {\Omega},\quad \hfill \\ \varphi ={\varphi }_{0}\,\text{on}\,\partial {\Omega}.\quad \hfill \end{cases}$ where A(u) = -diva(x, u, u) is a Leray-Lions operator of order p. The second member of the first equation is only in L 1(ω). We prove the existence of a bilateral solution by an approximation procedure, the keypoint being a penalization technique.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Diamond for Electronics: Materials, Processing and Devices

  • Araújo Gay, Daniel
  • Suzuki, Mariko
  • Lloret Vieira, Fernando Manuel
  • Alba Muñoz, Gonzalo
  • Villar Castro, María del Pilar
Progress in power electronic devices is currently accepted through the use of wide bandgap materials (WBG). Among them, diamond is the material with the most promising characteristics in terms of breakdown voltage, on-resistance, thermal conductance, or carrier mobility. However, it is also the one with the greatest difficulties in carrying out the device technology as a result of its very high mechanical hardness and smaller size of substrates. As a result, diamond is still not considered a reference material for power electronic devices despite its superior Baliga's figure of merit with respect to other WBG materials. This review paper will give a brief overview of some scientific and technological aspects related to the current state of the main diamond technology aspects. It will report the recent key issues related to crystal growth, characterization techniques, and, in particular, the importance of surface states aspects, fabrication processes, and device fabrication. Finally, the advantages and disadvantages of diamond devices with respect to other WBG materials are also discussed., The authors thank the Ministerio de Economia y Competitividad (MINECO) of the Spanish Government for funding under Grant Nos. TEC2017-86347-C2-1-R, ESP2017-91820, PID2020-117201RB-C21, and PID2019-110219RB-100 and the Junta de Andalucia (Andalusian Government, Spain) for funding through Nos. P20_00946, FEDER-UCA18- 106470 and FEDER-UCA18-107851 projects.