Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cobalt nanoclusters coated with N-doped carbon for chemoselective nitroarene hydrogenation and tandem reactions in water

  • Gutiérrez-Tarriño, Silvia
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Rojas-Buzo, Sergio
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Calvino, José J.
[EN] The development of active and selective non-noble metal-based catalysts for the chemoselective reduction of nitro compounds in aquo media under mild conditions is an attractive research area. Herein, the synthesis of subnanometric and stable cobalt nanoclusters, covered by N-doped carbon layers as core shell (CoaNC-800), for the chemoselective reduction of nitroarenes is reported. The Co@NC-800 catalyst was prepared by the pyrolysis of the Co(tpy)(2) complex impregnated on Vulcan carbon. In fact, the use of a molecular complex based on six N-Co bonds drives the formation of a well-defined and distributed cobalt core-shell nanocluster covered by N-doped carbon layers. In order to elucidate its nature, it has been fully characterized by using several advanced techniques. in addition, this as-prepared catalyst showed high activity, chemoselectivity and stability toward the reduction of nitro compounds with H-2 and under mild reaction conditions; water was used as a green solvent, improving the previous results based on cobalt catalysts. Moreover, the Co@NC-800 catalyst is also active and selective for the one-pot synthesis of secondary aryl amines and isoindolinones through the reductive amination of nitroarenes. Finally, based on diffraction and spectroscopic studies, metallic cobalt nanoclusters with surface CoNx patches have been proposed as the active phase in the Co@NC-800 material., The authors acknowledge the financial support from the Spanish Government (RTI2018-096399-A-I00) and the Program Severo Ochoa SEV-2016-0683. S. G. T. is thankful to MINECO for her FPU Ph.D. contract FPU16/02117. P. O.-B. is thankful to MICCIN for his Ramon y Cajal contract RYC-2014-16620 and to UPV for the grant PAID-06-18/SP20180172 The High-Resolution STEM data were recorded at the DME-UCA node of the ELECMI ICTS Spanish National Infrastructure for Electron Microscopy of Materials. JJC acknowledges financial support from MINECO/FEDER (Project MAT2017-97579-R). C. W. L. acknowledges the Visiting Researcher Fellowship from PRH 50.1 - ANP/FINEP Human Resources Program (Brazil).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AgAu nanoclusters supported on zeolites: Structural dynamics during CO oxidation

  • López-Hernández, I.
  • Truttmann, V.
  • Garcia, C.
  • W. Lopes, C.
  • Rameshan, C.
  • Stöger-Pollach, M.
  • Barrabés, N.
  • Rupprechter, G.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] The bimetallic nanocluster catalyst structure can change during pretreatment and reaction, thus in situ characterization techniques are required for a proper analysis of the active sites. In situ XAFS and DRIFTS were used to study the dynamic evolution of the metal active sites in bimetallic AgxAu25-x nanoclusters supported on ITQ2 zeolite during CO catalytic oxidation. The activity of the bimetallic nanocluster catalyst in this reaction was significantly higher than those of supported monometallic Ag-25 and Au-25 nanoclusters. These results were explained by the formation of AgAu alloyed nanoparticles, which favoured reactant adsorption and reaction. Furthermore, the initial activity depended on the catalyst pretreatment, obtaining better conversion, at lower temperatures, with the catalyst pretreated with hydrogen than with the catalyst pretreated with oxygen. This was also associated with an easier formation of a AgAu alloy under hydrogen pretreatment at 150 degrees C. However, the alloying process seemed to be completed after reaction in both cases, i.e. for the catalyst pretreated with oxygen and with hydrogen, obtaining the same catalytic performance with both catalysts upon reuse. The activity is constant in successive reaction runs, indicating high stability of the active species formed under reaction conditions. The results have shown that the combination of catalytic studies with in situ characterization techniques provides insight into the structural dynamics of the catalysts during activation and reaction., The authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. I. Lopez Hernandez is grateful to Generalitat Valenciana and European Social Fund for the pre doctoral grant ACIF2017. C.W.L. thanks PRH 50.1 - ANP/FINEP Human Resources Program (Brazil) for the Visiting Researcher Fellowship. We gratefully acknowledge ALBA synchrotron for allocating beamtime (proposal 2015091414) and the CL AE SS beamline staff for their help and technical support during our experiment. We acknowledge support by the Austrian Science Fund (FWF) via grants DK+Solids4Fun (W1243) , Single Atom Catalysis (I 4434-N) and Elise Richter (V831-N) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultra-low metal loading rhodium phosphide electrode for efficient alkaline hydrogen evolution reaction

  • Galdeano-Ruano, Carmen Piedad
  • Márquez, Inmaculada
  • Lopes, Christian Wittee
  • Calvente, Juan Jose
  • Agostini, Giovanni
  • Roldan, Alberto
  • Olloqui-Sariego, Jose Luis
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The practical production of hydrogen from water electrolyzers demands efficient electrocatalysts with maximized and optimized active sites that promote the Hydrogen Evolution Reaction (HER) at wide pH ranges. Herein, we successfully synthesized a rhodium-based nanomaterial with extremely low metal loading (2 mu g/cm(-2)) as electrocatalyst for the HER. In particular, the material consists of carbon-supported rhodium phosphide (Rh2P) as active sites, which are partially covered with carbon patches. The so-developed nanomaterial exhibits high crystallinity, resistance to sintering, and outstanding electrocatalytic activity and operational stability in an extended pH interval. Notably, Rh2P displays specific-mass activities, ca. 2.5- and 5-fold higher than those of the benchmark 20 wt% Pt/C at an overpotential of 50 mV in acidic and alkaline media, respectively. Comparison of the electrocatalytic performance of the current Rh2P electrocatalyst with those of phosphorus-free rhodium NPs and an alternative rhodium phosphide nanomaterial, reveals that the inclusion of phosphorus atoms, the purity and crystallinity of the Rh2P phase are critical to boost the electrocatalytic HER. This is corroborated by theoretical simulations using DFT, which also prove that the presence of C-patches on Rh2P favors the H2O dissociation during HER electrocatalytic cycle and prevents phosphorous leaching. Overall, this work provides new insights for the rational design and controlled synthesis of small NPs for using as efficient electrocatalysts in hydrogen-based renewable energy devices. (c) 2023 The Authors. Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/)., CGR thanks toMINECO for her FPU Ph.D. contract FPU17/04172. CWL thanks the PRH 50.1 e ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. These experiments were performed at CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff. S. Guti~errez-Tarri~no, J. S. Martinez, A. Garci ' a-Zaragoza and W. Henao are acknowledged for their assistance with XAS data acquisition. Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2021-126799NB-I00, TED2021130191B-C41, supported by MCIN/AEI/10.13039/501100011033 and by Uni~on Europea NextGenerationEU/PRTR, and TED2021130191B-C42), Junta de Andaluci ' a (P20_01027 and PYC 20 RE 060 UAL) and Generalitat Valenciana (MFA/2022/047, Advanced Materials programme, which was supported by MCIN with funding fromEuropean Union NextGeneration EU PRTR-C17.I1 and Generalitat Valenciana). We are thankful for the Electron Microscopy Service of the UPV for TEM facilities. We also acknowledge Supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.