Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of A -site ordering on the Mn local structure and polar phases of RBaMn2 O6 (R=La, Nd, Sm, and Y)

  • Subías, Gloria
  • Blasco, Javier
  • Cuartero, Vera
  • Lafuerza, Sara
  • Simonelli, Laura
  • Gorni, Giulio
  • Castro, Miguel
  • García, Joaquín
We have investigated the temperature dependence of the Mn local structure in A-site ordered RBaMn2O6 (R=La, Nd, Sm, and Y) perovskites, in parallel with their disordered counterparts, R0.5Ba0.5MnO3, by means of x-ray emission (XES) and x-ray absorption spectroscopy (XAS) The end member LaBaMn2O6 shows a nearly regular MnO6 octahedron independent of temperature. With decreasing the R ionic radius in the ordered samples, the XAS results indicate that a local distortion develops in the MnO6 octahedron at the low-temperature charge-localized and polar phases. For NdBaMn2O6, this local distortion is tiny, indicating the absence of charge segregation at the Mn site. This is followed by a bigger local distortion anticipated for SmBaMn2O6 in its respective charge-localized and polar phase and finally, the biggest local distortion for the smallest A-site cation ordered compound, YBaMn2O6, for which it even persists above the polar charge-localization transition temperatures. The high-resolution XAS spectra confirm the presence of charge segregation between two nonequivalent Mn sites in the low-temperature polar phase of Sm and Y ordered samples. Thus, our XAS study suggests a displacive mechanism for the charge-localization and polar transitions in the Nd and Sm ordered samples while a combination of displacive and order-disorder contributions is revealed for YBaMn2O6. Besides, calorimetric measurements confirm the combination of the two mechanisms, order-disorder and displacive, for the ordered Sm and Y compounds. On the other hand, the A-site disordered R0.5Ba0.5MnO3 samples with R cations smaller than Nd present a significant static (temperature-independent) local disorder, which explains why polar charge-localization transitions are not developed in these samples. Finally, we correlate our results about the Mn local structure and character of the transitions with the macroscopic magnetic and electric behavior of both A-site ordered and disordered compounds., The authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación from Universidad de Zaragoza and Servicio de Calorimetría y Análisis Térmico of the INMA institute. Granted beam time at BL22 (CLAESS) beam line at ALBA synchrotron is acknowledged (Project No. 2018022760). For financial support, we thank the Spanish Ministerio de Ciencia, Innovación y Universidades (Projects No. RTI2018-098537-B-C22 and No. PID2021-124734OB-C21 cofunded by ERDF from EU). G.G. acknowledges Grant No. FJC2020-044866-I funded by Project MCIN/AEI/10.13039/501100011033 and by the “European Union Next Generation EU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Luminescence of Nd3+-doped LaF3 glass-ceramics enhanced with Ag nanoparticles

  • Sedano, Mercedes
  • Gorni, Giulio
  • Mather, Glenn C.
  • Durán, Alicia
  • Fernández, Joaquín
  • Balda, Rolindes
  • Pascual, M. Jesús
Nd3+-doped, LaF3-based, transparent oxyfluoride glass-ceramics (GCs) containing Ag nanoparticles (NPs) have been prepared by a melt-quenching method. Different Ag-containing precursors were employed, with AgNO3 as the most suitable for obtaining Ag NPs segregated in the glassy matrix. Transmission electron microscopy and X-ray absorption spectroscopy determined the presence of Ag0 NPs, with higher concentrations in glass-ceramics produced in an inert atmosphere (N2). The spectral features of emission and excitation spectra, in addition to the different lifetimes of the 4 F3/2 state in the co-doped samples with Ag NPs, demonstrate the incorporation of Nd3+ ions into the LaF3 nanocrystals. The relative contribution to the emission from Nd3+ in the nanocrystals depends on the Ag concentration and atmosphere. The glass-ceramic co-doped with 0.2 wt% Ag, thermally treated in N2, exhibits the highest contribution of emissions attributable to Nd3+ ions in the crystalline phase. The crystalline fraction is similar to that of a Ag-free sample synthesized under analogous conditions. This increase of the luminescence is likely attributable to the enhancement of the local electric field in the LaF3 nanocrystals due to the presence of Ag0 NPs., This work was supported by MICINN [grant number PID2020-115419 GBC21/C22/ AEI/10.13039/501100011033], the University of the Basque Country GIU21/006 and PIBA2023_1_0017 (Basque Country Government). XANES and EXAFS experiments were performed at the BL22-CLAESS beamline at the ALBA synchrotron with the collaboration of ALBA staff under the experiment number AV-2022025686. Giulio Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union Next Generation EU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intracellular transformation and disposal mechanisms of magnetosomes in macrophages and cancer cells

  • Gandarias, Lucía
  • Gubieda, Alicia G
  • Gorni, Giulio
  • Mathon, Olivier
  • Olivi, Luca
  • Abad-Díaz-de-Cerio, Ana
  • Fdez-Gubieda, M Luisa
  • Muela, Alicia
  • García-Prieto, Ana
8 pags., 5 figs., Magnetosomes are magnetite nanoparticles biosynthesized by magnetotactic bacteria. Given their potential clinical applications for the diagnosis and treatment of cancer, it is essential to understand what becomes of them once they are within the body. With this aim, here we have followed the intracellular long-term fate of magnetosomes in two cell types: cancer cells (A549 cell line), because they are the actual target for the therapeutic activity of the magnetosomes, and macrophages (RAW 264.7 cell line), because of their role at capturing foreign agents. It is shown that cells dispose of magnetosomes using three mechanisms: splitting them into daughter cells, excreting them to the surrounding environment, and degrading them yielding less or non-magnetic iron products. A deeper insight into the degradation mechanisms by means of time-resolved X-ray absorption near-edge structure (XANES) spectroscopy has allowed us to follow the intracellular biotransformation of magnetosomes by identifying and quantifying the iron species occurring during the process. In both cell types there is a first oxidation of magnetite to maghemite and then, earlier in macrophages than in cancer cells, ferrihydrite starts to appear. Given that ferrihydrite is the iron mineral phase stored in the cores of ferritin proteins, this suggests that cells use the iron released from the degradation of magnetosomes to load ferritin. Comparison of both cellular types evidences that macrophages are more efficient at disposing of magnetosomes than cancer cells, attributed to their role in degrading external debris and in iron homeostasis., his work was supported by the grant PID2020-115704RB-C31 funded by MCIN/AEI/10.13039/501100011033 and by the grant IT1479-22 funded by the Basque Government. L.G. would like to thank the financial support from the grant PRE2018-083255 funded by MCIN/AEI/10.13039/501100011033 andby European Union NextGenerationEU/PRTR. G.G. acknowl-edges financial support from the grant FJC 2020-044866-I funded by MCIN/AEI/10.130339/501100011033 and Euro-pean Union NextGeneration EU/PRTR. The authors thank SGIker(UPV/EHU/ERDF,EU)for technical and human support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-Driven Nitrogen Fixation to Ammonia over Aqueous-Dispersed Mo-Doped TiO2 Colloidal Nanocrystals

  • Barawi, Mariam
  • García-Tecedor, Miguel
  • Gomez-Mendoza, Miguel
  • Gorni, Giulio
  • Liras, Marta
  • de la Peña O'Shea, Víctor A.
  • Collado, Laura
13 pags., 6 figs., Photocatalytic nitrogen fixation to ammonia and nitrates holds great promise as a sustainable route powered by solar energy and fed with renewable energy resources (N2 and H2O). This technology is currently under deep investigation to overcome the limited efficiency of the process. The rational design of efficient and robust photocatalysts is crucial to boost the photocatalytic performance. Widely used bulk materials generally suffer from charge recombination due to poor interfacial charge transfer and difficult surface diffusion. To overcome this limitation, this work explores the use of aqueous-dispersed colloidal semiconductor nanocrystals (NCs) with precise morphological control, better carrier mobility, and stronger redox ability. Here, the TiO2 framework has been modified via aliovalent molybdenum doping, and resulting Mo-TiO2 NCs have been functionalized with charged terminating hydroxyl groups (OH-) for the simultaneous production of ammonia, nitrites, and nitrates via photocatalytic nitrogen reduction in water, which has not been previously found in the literature. Our results demonstrate the positive effect of Mo-doping and nanostructuration on the overall N2 fixation performance. Ammonia production rates are found to be dependent on the Mo-doping loading. 5Mo-TiO2 delivers the highest NH4+ yield rate (ca. 105.3 μmol g-1 L-1 h-1) with an outstanding 90% selectivity, which is almost four times higher than that obtained over bare TiO2. The wide range of advance characterization techniques used in this work reveals that Mo-doping enhances charge-transfer processes and carriers lifetime as a consequence of the creation of new intra band gap states in Mo-doped TiO2 NCs., This work has received funding from the national projects ARMONIA (PID2020-119125RJ-I00), NovaCO2 (PID2020-118593RB-C22), 2D-Photo2Change (TED2021-129999A-C33), and Nhympha (PID2019-106315RB-I00) funded by MCIN/AEI/10.13039/501100011033. Additional funding has been received from the projects SOL-Future (PLEC2021-0079069) and SolarCPP-Bat (CNS2022-135380), funded by both MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR. This work received also support from “La Caixa” foundation fellowship (ID 100010434, fellowship code LCF/BQ/PR23/11980046). XAS experiments were performed at the CLAESS beamline of the ALBA synchrotron (proposal no. AV-2020074403) with the support of the ALBA staff. M.B. thanks Juan de la Cierva Incorporación grant (IJC2019-042430-I) funded by MCIN/AEI/10.13039/501100011033. G.G. acknowledges FJC2020-044866-I grant funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring OH incorporation pathways in pulsed laser deposited EuOOH thin films

  • Nieto-Pinero, Eva
  • Gorni, Giulio
  • Caño, Andrés
  • Mariscal, A.
  • Briand, E.
  • Trimaille, I.
  • Ganem, J. J.
  • Vickridge, I.
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
6 pages, 7 figures, This study sheds light on the formation of EuOOH thin films intended for photonic applications in light emission. To this end, we designed a unique experiment in which we deposited films by pulsed laser deposition from an Eu2O3 target followed by low temperature annealing in an isotopic furnace, which allows selecting atmospheres (18O2 or D218O vapour) containing specific isotopes. Ion beam techniques have been used for the absolute determination of 16O and H content as well as that of the isotopes (18O, D) incorporated in the films upon annealing. A large content of either H2O or hydroxyl (OH−) groups was identified in the as-deposited films by infrared spectroscopy, while the incorporation of 18O or D upon annealing is limited (≤8 % and ≤ 4 %, respectively). Yet, annealing is a critical and necessary step to achieve the right stoichiometry and to induce the formation of hydroxides. Films produced under the optimum deposition pressure range (≤4 × 10−4 Pa) and annealing atmosphere (D218O) show the EuOOH monoclinic structure, while their photoluminescence response is in excellent agreement with the emission of Eu3+ ions in monoclinic EuOOH., This work was funded by the Spanish Research Agency (AEI, Ministry of Research, Innovation and Universities) and the European Regional Development Fund (ERDF) under grant PID2021-123190OB-I00, and by the CSIC (PIE-202050E195). IBA experiments were carried out at SAFIR platform (Systeme d’Analyse par Faisceaux d’Ions Rapides) at Institute des NanoSciences de Paris (INSP) and they were supported by RADIATE (Research And Development with Ion Beams–Advancing Technology in Europe) project funded by the EU Horizon 2020 research and innovation programme (Grant No 824096). The work of A. Cano was partially supported by the Autonomous Community of Madrid and the European Social Fund (PEJD-2019-PRE/TIC-16082). G. Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/ 10.13039/501100011033, by Plan de Recuperaci´ on, Transformacion y Resiliencia, and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic restructuring of nickel sulfides for electrocatalytic hydrogen evolution reaction

  • Ding, Xingyu
  • Liu, Da
  • Zhao, Pengju
  • Chen, Xing
  • Wang, Hongxia
  • Oropeza, Freddy E.
  • Gorni, Giulio
  • Barawi, Mariam
  • García-Tecedor, Miguel
  • Peña O'Shea, Víctor A. de la
  • Hofmann, Jan P.
  • Li, Jianfeng
  • Kim, Jongkyoung
  • Cho, Seungho
  • Wu, Renbing
  • Zhang, Kelvin H. L.
11 pages, 5 figures, Transition metal chalcogenides have been identified as low-cost and efficient electrocatalysts to promote the hydrogen evolution reaction in alkaline media. However, the identification of active sites and the underlying catalytic mechanism remain elusive. In this work, we employ operando X-ray absorption spectroscopy and near-ambient pressure X-ray photoelectron spectroscopy to elucidate that NiS undergoes an in-situ phase transition to an intimately mixed phase of Ni3S2 and NiO, generating highly active synergistic dual sites at the Ni3S2/NiO interface. The interfacial Ni is the active site for water dissociation and OH* adsorption while the interfacial S acts as the active site for H* adsorption and H2 evolution. Accordingly, the in-situ formation of Ni3S2/NiO interfaces enables NiS electrocatalysts to achieve an overpotential of only 95 ± 8 mV at a current density of 10 mA cm-2. Our work highlighted that the chemistry of transition metal chalcogenides is highly dynamic, and a careful control of the working conditions may lead to the in-situ formation of catalytic species that boost their catalytic performance., The authors acknowledge funding supports from National Natural Science Foundation of China under Grant Nos. 22075232, 22275154, and 52225104. K.H.L.Z., J.P.H., and X.D. also acknowledge the Mobility Program of the Sino-German Center for Research Promotion (Grant No. M0377). R.W. is grateful for funding support by “Shuguang Program” supported by the Shanghai Education Development Foundation and Shanghai Municipal Education Commission (No. 20SG03), and the Science and Technology Commission of Shanghai Municipality (No. 22520710600). F.E.O. thanks to MINECO and European NextGenerationEU/PRTR Fund for the Ramón y Cajal contract (RyC2021-034254-I). V.A.P.O. is grateful for the funding supported by the EU (HYSOLCHEM project with grant agreement No. 101017928) and Spanish AEI (SOLFuture PLEC2021-007906). Giulio Gorni acknowledges Grant FJC2020044866-I funded by MCIN/AEI/ 10.13039/501100011033, by Plan de recuperación, transformación y resiliencia, and by the “European Union NextGenerationEU/PRTR”. Mariam Barawi acknowledges NovaCO2 project (PID2020-118593RB-C22) and the RYC2022-038157-I Grant funded by MCIN/AEI/ 10.13039/501100011033. M.G.-T. acknowledges PEC2Change project (TED2021-129999A-C33) funded by MCIN/AEI/ 10.13039/501100011033 and the European Union Next Generation EU/ PRTR. Additionally, the project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/PR23/11980046. Part of these experiments was performedat the CLAESS beam line of the ALBA synchrotron (proposal number AV-2021035069) with the help of the ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Composition-dependent PMS activation in SrxLa2-xCoO4±δ perovskite-derivatives: From radical to strengthen the electron-transfer pathway

  • Shen, Yu
  • Martín de Vidales, María J.
  • Gorni, Giulio
  • Sampaio, Maria J.
  • Silva, Adrián M.T.
  • Lado Ribeiro, Ana R.
  • Dos santos-García, Antonio J.
12 pags., 7 figs., Ruddlesden-Popper phases (R-P) with the chemical formula SrxLa2-xCoO4±δ (x=0.6, 0.8, 1.0, 1.2, and 1.5), consisting of alternating layers of perovskite and rock-salt type oxides, were found to be efficient catalysts for peroxymonosulfate (PMS) activation. By modifying the strontium content, it is possible to tune the spin state of cobalt in the material, which in turn affects the PMS activation mechanism. When the rock-salt layer is intercalated in the R-P perovskite structure, as in Sr0.8La1.2CoO4, a non-radical pathway is involved, which exhibits superior performance in PMS activation, as indicated by the higher reaction rate constant (0.70 min−1) compared to LaCoO3 (0.13 min−1) with SO4•- generation as the primary mechanism. This research provides a deeper understanding of how the electronic structure of cobalt in perovskite oxides influences the PMS activation mechanism. Such insights are crucial for the rational design of effective PMS activators for water treatment., Yu Shen acknowledges support from the China Scholarship Council (CSC) scholarship (201807040073) and UPM through “Programa Propio” for an internship grant. Authors also acknowledge Spanish Ministerio de Ciencia e Innovacion (MICINN) for funding through the grant number MAT2017–84385-R. XAS experiments were performed at the CLÆSS beamline at ALBA Synchrotron (Proposal No. 2021035129) with the collaboration of ALBA staff. G. Gorni acknowledges Grant FJC2020- 044866-I funded by MCIN/AEI/ 10.13039/501100011033, by Plan de recuperacion, transformacion y resiliencia, and by the “European Union NextGenerationEU/PRTR”. This work was supported by national funds through FCT/MCTES (PIDDAC): LSRE-LCM, UIDB/50020/2020 (DOI: 10.54499/UIDB/50020/2020) and UIDP/50020/2020 (DOI: 10.54499/ UIDP/50020/2020); and ALiCE, LA/P/0045/2020 (DOI: 10.54499/LA/ P/0045/2020). MJS acknowledges the FCT funding received under the Scientific Employment Stimulus-Institutional Call (CEECINST/00010/ 2021/CP1770/CT0011). ARLR acknowledges the FCT funding received under the Scientific Employment Stimulus-Individual Call (2022.00184. CEECIND/CP1733/CT0001, DOI: 10.54499/2022.00184.CEECIND/ CP1733/CT0001)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning light emission in Bi and V codoped MgAl2O4 nanostructured films

  • Gorni, Giulio
  • Serna, Rosalía
  • García-López, J.
  • Gonzalo de los Reyes, J.
This study investigates the synthesis of novel Bi and V-codoped MgAl2O4 nanostructured thin films for near-white-light emission upon UV excitation. Sequential pulsed laser deposition (PLD) from Bi, V, and MgAl2O4 targets was employed to prepare nanostructured films with different compositions. The films have been thoroughly analyzed using Rutherford backscattering spectrometry (RBS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and photoluminescence spectroscopy (PL). Upon heat treatments at 500 °C and 800 °C, the films exhibit a broad blue emission in Bi-doped films and a broad yellow emission in V-doped films, respectively. We demonstrate that a strategic combination of Bi and V codoping in MgAl2O4 nanostructures results in near-white light emission. This study highlights the ability to finely control the nanostructure and emission properties of thin films using PLD, and the use of abundant and non-toxic elements to produce white light emission, with significant implications for advanced and sustainable photonic applications., This work was funded by the Spanish Research Agency (AEI, Ministry of Science, Innovation and Universities) and the European Regional Development Fund (ERDF) under grant PID2021-123190OB-I00, and by the CSIC (PIE-202050E195 and project 2021AEP128IO). Giulio Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/ 10.13039/501100011033, by Plan de recuperacion, transformacion y resiliencia, and by the “European Union NextGenerationEU/PRTR”. The CNA acknowledges the Spanish Ministry of Science, Innovation and Universities for grant number ICTS-2020-02 US-4 (FEDER/EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Smart bactericidal textile enabling in-situ visual assessment of antimicrobial activity

  • Ferrer-Vilanova, Amparo
  • Jimenez Ezenarro, Josune
  • Ivanova, Kristina
  • Calvo, Óscar
  • Perelshtein, Ilana
  • Gorni, Giulio
  • Reguera, Ana Cristina
  • Rodríguez-Rodríguez, Rosalía
  • Blanes, Maria
  • Vigués, Núria
  • Mas, Jordi
  • Gedanken, Aharon
  • Tzanov, Tzanko
  • Guirado, Gonzalo
  • Muñoz-Berbel, Xavier
13 pages, 6 figures, 1 table, Hospital fabrics and wound dressings with antibacterial properties are essential to minimize infection risks associated with bacterial colonization of textiles. A key challenge of these materials lies in the difficulty in assessing their functional lifespan. Integrating bacterial-sensing elements into smart textiles enables real-time and in-situ evaluation of antibacterial activity. However, this approach is often hindered by the reactivity between bactericidal and bacterial-sensing components, the limited stability and selectivity of the sensing probes, and high production costs. Here, we address these challenges by presenting a smart textile that simultaneously provides antibacterial activity and bacterial-sensing capacity using a layer-by-layer sonochemical deposition method. Prussian blue, a chromogenic bacterial-sensing probe, is integrated onto hospital-grade antibacterial fabrics containing copper oxide nanoparticles. When the biocidal fabric begins to lose its antimicrobial activity, live bacteria in the textile metabolically reduce Prussian blue nanoparticles, triggering a visible colour change. This approach offers several key advantages, such as: (i) the resulting textile retains antibacterial activity comparable to conventional copper oxide-based textiles (A value > 4 in both cases); (ii) it provides a direct and visible colour transition from blue to colourless (>20 % colour losses) when the antibacterial coating begins to lose effectiveness, enabling straightforward monitoring of antibacterial lifespan without external instruments or reagents; (iii) the co-immobilization enhances coating stability, nearly doubling the binding strength of copper oxide and Prussian blue compared to single-layer coatings; and (iv), the additional Prussian blue layer significantly reduces the material cytotoxicity, enhancing biocompatibility for safer use in healthcare settings. These innovations offer a scalable, cost-effective, and multifunctional solution for infection control. The smart textile not only prevents bacterial spread but also provides timely, visual indications of coating degradation, making it a promising tool for improving patient safety in hospitals and for minimizing infection risks in schools and other high-risk environments., This work was supported by the European Commission through the project PROTECT (H2020-NMBP-PILOT-720851). Some of these experiments were performed at the CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2021024980). The authors thank the Ministerio de Ciencia e Innovacion of Spain for financial support through the project PID2019-106171RB-I00, FJC2020-044866- I/MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and nonlinear optical properties of TeO2–WO3–PbO thin film glasses

  • Gorni, Giuliio
  • Muñoz-Martín, David
  • Ruiz de la Cruz, A.
  • Martin-Diaconescu, V.
  • Simonelli, L.
  • García-López, J.
  • Fernández-Navarro, José María
  • Solís Céspedes, Javier
  • Gonzalon de los Reyes, J.
10 pages, 8 figures, 3 tables, Lead tungsten tellurite thin film glasses have been produced by pulsed laser deposition in a broad TeO2 compositional range (50–85 mol%). Films present high transparency with an optical band gap Eg = 3.3–3.4 eV, large refractive index (n > 2) and reduced absorption (k < 10−4) in the visible and near infrared ranges, whereas their nonlinear optical response (∣χ(3)∣) is found to be ≥ 10−12 esu at 1.3 μm. The dependence of n, Eg and ∣χ(3)∣ with film composition is analyzed and compared with the values determined for the parent bulk glasses. ∣χ(3)∣ increases as the TeO2 content in the film glasses decreases, while it remains constant for bulk glasses. This behaviour is analyzed in the frame of Line's model and correlated to the structural differences between bulk and film glasses. In the case of bulk glasses, X-ray absorption spectroscopy results at the W L3 and L1-edges clearly indicate the presence of W6+ ions in a distorted octahedral coordination, with the coordination environment and W–O bond distance remaining unchanged regardless of the WO3 content. Raman analysis suggests that films have a structure close to that of bulk glasses, with a moderate WO3 and PbO enrichment, and a relative increase of the non-bridging oxygen fraction that are proposed to be responsible for the observed increase of ∣χ(3)∣ in the films., This work was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants PID2020-112770RB-C21 and PID2021-123190OB-I00, and by the CSIC (PIE-202050E195). G. Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/10.13039/501100011033, by Plan de Recuperación, Transformación y Resiliencia, and by the “European Union NextGeneration EU/PRTR”. A. Jha (Institute for Materials Research, Univ. of Leeds) is thanked for helpful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring bismuth visible emission via glass composition engineering

  • Gorni, Giulio
  • Pérez, Cristina
  • Ramos-Justicia, J. F.
  • Urbieta, A.
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
13 pages, 10 figures, 1 table, We explore the tunability of bismuth ion (Bi<sup>3+</sup>) emission by modifying the glass composition and structure through the inclusion of specific alkaline (Li<sup>+</sup>, Na<sup>+</sup>, K<sup>+</sup>) and alkaline earth (Ca<sup>2+</sup>, Ba<sup>2+</sup>) ions. Bi<sup>3+</sup>-doped oxide glasses were synthesized using the melt-quenching method and extensively analyzed using differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and X-ray absorption spectroscopy (XAS). Their optical properties were evaluated through photoluminescence (PL) and photoluminescence excitation (PLE) spectroscopy. Our findings show that the glass transition temperature and network structure exhibit a different evolution when only alkaline ions or both alkaline and alkaline earth ions are included simultaneously. This behavior is related to the presence or not of the mixed alkali effect in different glass systems. XAS analysis confirms the presence of Bi<sup>3+</sup> ions. The incorporation of Li<sup>+</sup>, in combination with Na<sup>+</sup> and/or K<sup>+</sup>, leads to broad PL emission spanning from blue to near-white light and extending into the orange-red region under UV excitation. Notably, Li <sup>+</sup> plays a crucial role in shifting the Bi<sup>3+</sup> emission toward the orange-red spectrum, with Na<sup>+</sup> and K<sup>+</sup> further enhancing this shift, likely due to the mixed alkali effect. Meanwhile, glasses containing Ca<sup>2+</sup> and Ba<sup>2+</sup> exhibit tunable cyan-to-white emission, which can be precisely controlled by adjusting their concentrations. This study highlights the critical role of glass composition engineering in optimizing the luminescent properties of Bi<sup>3+</sup>-doped glasses, offering valuable insights for the development of advanced photonic materials., This work was funded by the Spanish Research Agency (AEI, Ministry of Science, Innovation and Universities) and the European Regional Development Fund (ERDF) under grant PID2021-123190OB-I00/AEI/10.13039/501100011033/FEDER,UE, and by the CSIC (PIE-202050E195 and project 2021AEP128IO). This work has been financed by UCM under project PR3/23–30813. Giulio Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/10.13039/501100011033, by Plan de recuperación, transformación y resiliencia, and by the “European Union NextGenerationEU/PRTR”. C. Pérez acknowledges Programa Investigo funded by Comunidad de Madrid. J. F. Ramos-Justicia thanks economical support of UCM-Banco Santander CT15/23 predoctoral grant. The authors would like to acknowledge ALBA Synchrotron for XAS measurements performed during in-house beamtime (2024068474)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

X-ray absorption spectroscopy for the study of glasses and glass-ceramics for optical applications: A comprehensive review

  • Gorni, Giulio
31 pages, 26 figures, X-ray Absorption Spectroscopy (XAS) is an essential technique for elucidating the local atomic structure and oxidation state of specific elements in glasses and glass-ceramics of optical interest. XAS provides element-selective information on disordered materials, unlike conventional diffraction techniques, allowing one to discuss dopant environments, short- and medium-range order, and mechanisms of crystallization. The review provides a general survey of XAS applications on different glass families for optical applications, including silicates, borates, borosilicates, phosphates, heavy metal oxides, fluorides, chalcogenides, oxyfluorides, and glass-ceramics. Principal emphasis is put on the structural role of rare-earth, transition, and post-transition metal ions whose coordination environment and oxidation state play a crucial role in determining photoluminescence, quantum yield, and nonlinear optical properties. The review also addresses methodological issues in XAS data acquisition and analysis, such as, detection modes, spectral fits, and the application of complementary computational packages. With optical functionalities correlated with structural parameters, this review highlights the role of XAS in rational photonic material design., Giulio Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/10.13039/501100011033, by Plan de recuperacion, transformacion y resiliencia, and by the “European Union NextGenerationEU/PRTR”
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Mn local structure and magnetic and thermal properties of A-site ordered RBaMn2O6 (R = La, Nd, Sm, and Y) [Dataset]

  • Subías, Gloria
  • Blasco, Javier
  • Cuartero, Vera
  • Lafuerza, Sara
  • Simonelli, Laura
  • Gorni, Giulio
  • Castro, Miguel
  • García, Joaquín
The degree of A-site disorder was checked with X-Ray powder diffraction (XRPD) measurements (YBaMn2O6_XRD_RT_FigS2.dat; SmBaMn2O6_XRD_RT_FigS2.dat; Y05Ba05MnO3_XRD_RT_FigS2.dat; Sm05Ba05MnO3_XRD_RT_FigS2.dat), using a RIGAKU D-max 2500 diffractometer at Cu Ka radiation within the 10-80° 2θ range., HERFD-XAS measurements at the Mn K-edge were performed at the CLAESS beamline of the ALBA Synchrotron (Cerdanyola del Vallès, Spain) using a Si (311) double-crystal monochromator. HERFD-XAS spectra were collected in back scattering geometry at the maximum of the Mn Kb1,3 (6490 eV) emission line using the CLEAR spectrometer. A liquid-N2 cryostat was used for the temperature-dependent measurements between 80 and 600 K., Standard transmission detected EXAFS spectra were recorded in the La and Y compounds and For RE = Nd and Sm, EXAFS spectra were obtained by recording simultaneously the HERFD-XAS at the Mn Kb1,3 line and the TFY-XAS spectra measured with a Si diode., DC Magnetization measurements, collected with a commercial QD SQUID between 5 and 400 K at an external magnetic field of 1 kOe for both ordered REBaMn2O6 and disordered RE0.5Ba0.5MnO3 series with RE=La, Nd and Sm. For the YBaMn2O6 and Y0.5Ba0.5MnO3 samples, the dc magnetization was measured between 5 and 700 K at 1 KOe and field-cooled magnetization at 1 kOe was also recorded for the Y0.5Ba0.5MnO3 compound., Calorimetric measurements were made in the ordered REBaMn2O6 (RE= Sm and Y) compounds using a Q2000 Differential scanning calorimeter (DSC) from TA instruments in the temperature range from 200 K to 575 K. Powder samples (between 10-40 mg) sealed in aluminum hermetic pans were heated and cooled at a scanning rate of 10 K/min., We have investigated the temperature dependence of the Mn local structure in A-site ordered RBaMn2O6 (R = La, Nd, Sm, and Y) perovskites, in parallel with their disordered counterparts, R0.5Ba0.5MnO3, by means of x-ray emission (XES) and x-ray absorption spectroscopy (XAS) The end member LaBaMn2O6 shows a nearly regular MnO6 octahedron independent of temperature. With decreasing the R ionic radius in the ordered samples, the XAS results indicate that a local distortion develops in theMnO6 octahedron at the low-temperature charge-localized and polar phases. For NdBaMn2O6, this local distortion is tiny, indicating the absence of charge segregation at the Mn site. This is followed by a bigger local distortion anticipated for SmBaMn2O6 in its respective charge-localized and polar phase and finally, the biggest local distortion for the smallest. A-site cation ordered compound, YBaMn2O6, for which it even persists above the polar charge-localization transition temperatures. The high-resolution XAS spectra confirm the presence of charge segregation between two nonequivalent Mn sites in the low-temperature polar phase of Sm and Y ordered samples. Thus, our XAS study suggests a displacive mechanism for the charge-localization and polar transitions in the Nd and Sm ordered samples while a combination of displacive and order-disorder contributions is revealed for YBaMn2O6. Besides, calorimetric measurements confirm the combination of the two mechanisms, order-disorder and displacive, for the ordered Sm and Y compounds. On the other hand, the A-site disordered R0.5Ba0.5MnO3 samples with R cations smaller than Nd present a significant static (temperature-independent) local disorder, which explains why polar charge-localization transitions are not developed in these samples. Finally, we correlate our results about the Mn local structure and character of the transitions with the macroscopic magnetic and electric behavior of both A-site ordered and disordered compounds., This work was funded by MICIU/AEI/10.13039/501100011033 and ERDF/UE (RTI2018-098537-B-C22, PID2021-124734OB-C21, FJC2020-044866-I)., No