Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Mitigation of CO2 emissions by hydrotalcites of Mg3Al-CO3 at 0 °C and high pressure

  • Suescum-Morales, David
  • Cantador Fernández, David
  • Jiménez Romero, José Ramón
  • Fernández Rodríguez, José María
This work shows the maximum CO2 capture capacity, using CO2 isotherms at 0, 20 and 30 °C and pressures of up to 35 atm, of four adsorbents with different particle size distribution and different pore size distribution: two hydrotalcites of Mg3Al-CO3, one synthesized in laboratory (C1) and another commercial (C2) and two calcined (C1 500 and C2 500) obtained from C1 and C2 by calcination at 500 °C for 2 h, respectively. The maximum capture capacities were obtained for samples calcined (CLDH), 98.16 mg·g−1 for C2 500 sample and 142.02 mg·g−1 for sample C1 500, both at 0 °C and 34.28 atm. The capture capacity of the C2 500 sample was the least influenced by temperature changes, which could be related to the porous structure of the samples. Consequently, for applications that are carried out between 0 and 30 °C, the best sample will be C2 500. Previously the samples were characterized by X-ray diffraction, transmission and scanning electron microscopy, thermogravimetric and thermo-differential analysis, particle size distribution and pore size distribution by N2 adsorption isotherms. The CO2 adsorption isotherms data were adjusted to the Freundlich, Langmuir, Dubinin-Radushkevich y Temkin models. These two last models confirmed that the nature for CO2 adsorption was physical. In short, this work showed the usefulness of calcined hydrotalcite as a CO2 adsorbent, using low temperature (0 °C) and high pressure (34.28 atm) as working conditions.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Effect of moderate temperatures on compressive strength of ultra-high-performance concrete: A microstructural analysis

  • Suescum-Morales, David
  • Ríos, José David
  • Martínez de la Concha, Antonio
  • Cifuentes, Hector
  • Jiménez Romero, José Ramón
  • Fernández Rodríguez, José María
Concrete with two types of steel fibres and a polypropylene fibre prevented spalling and preserved the compressive strength at 300 °C, which makes these concretes suitable for long-term applications up to 300 °C, such as for steam collectors or thermal energy storage systems. The compressive strength behaviour of three types of ultra-high-performance fibre-reinforced concrete manufactured with the same matrix was investigated. For this purpose, a complete characterisation of all the raw materials and the three types of fibres used was performed. The morphology of all concrete mixtures at room temperature was analysed using scanning electron microscopy–energy-dispersive X-ray spectroscopy. From the results, it was ascertained that the steel fibres and coarse siliceous aggregates were not in contact (being separated by ≥3.41 μm) and were surrounded by the binder (of ≥1 μm in thickness) for all the mixtures studied. Rosenhahnite and/or quartz Dauphiné-twinned phases improved the compressive strength (as determined by X-ray diffraction)
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Potential CO2 capture in one-coat limestone mortar modified with Mg3Al–CO3 calcined hydrotalcites using ultrafast testing technique

  • Suescum-Morales, David
  • Cantador Fernández, David
  • Jiménez Romero, José Ramón
  • Fernández Rodríguez, José María
The objective of this work is to quantify the CO2 capture capacity of an industrial one-coat limestone mortar containing different percentages of calcined Mg3Al–CO3 hydrotalcite (HT C2500) added (0, 2.5, and 5%) in different hardening environments (with different concentrations of CO2). The maximum CO2 capture capacity (calculated by thermogravimetric analysis) for 0, 2.5, and 5% of added HT C2500 were 1127, 1143, and 1223 g·m−2 (as rendering), respectively. This amount of CO2 is approximately one-third of that emitted during the manufacture of the cement used for this mortar. The addition of calcined hydrotalcite worsened the compressive strengths obtained in all the hardening environments studied. A 5% of calcined hydrotalcite increased the CO2 capture capacity by 8.52% with respect to the reference mortar. Ultrafast testing method (using CO2 isotherms at high pressure) has been proposed to quantify the CO2 capture capacity in very short period of time. A slight modification in the dosage of calcined hydrotalcite in an industrial one-coat mortar can contribute to mitigating climate change
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Technical and environmental assessment of CO2-cured alkali-activated pervious paving blocks incorporating recycled aggregates

  • Merino-Lechuga, Antonio Manuel
  • Lamaa, Ghandy
  • Vasco Silva, Rui
  • De Brito, Jorge
  • Jiménez Romero, José Ramón
  • Fernández Rodríguez, José María
  • González-Caro, Ágata
The study explores the development of 200 × 100 × 60 mm alkali-activated vibro-compacted pervious paving blocks incorporating waste precast concrete as aggregates, along with fly ash and mine tailings as binders. This approach embodies the principles of circular economy and contributes to the decarbonisation of construction materials. The mechanical performance, permeability, and environmental impact were evaluated, emphasising sustainability without compromising functionality. These properties were assessed according to the European standard EN 1338 to determine their technical feasibility as well as certification and marketability. The results showed that the integration of accelerated carbonation further enhanced mechanical properties and durability as alkali-activated permeable pavers with 100 % recycled aggregate incorporation led to a 34 % increase in compressive strength and a 50 % reduction in abrasion wear. Permeability performance was also analysed and revealed suitable infiltration rates for stormwater management in urban pavements. The life cycle assessment, based on a gate-to-gate approach, revealed that employing industrial by-products and recycled materials significantly decreases greenhouse gas emissions, demonstrating the eco-efficiency of the proposed solution, with a carbon footprint of 129.2 kg CO2eq, corresponding to a 49 % reduction compared to Portland cement block counterparts, which registered 253.7 kg CO2eq. These findings position the developed materials as a technically and environmentally viable alternative for pervious paving applications, promoting resource conservation and environmental stewardship in the construction industry.