Pasar al contenido principal

DESARROLLO DE ALEACIONES Y COMPUESTOS PARA RECUBRIMIENTOS POR LASER SOBRE ALEACIONES DE TITANIO

MAT2008-06882-C04-04

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Problems in laser repair cladding a surface AISI D2 heat-treated tool steel

  • Candel Bou, Juan José
  • Ramos de Campos, José Antonio
  • Amigó, Vicente|||0000-0002-2107-0273
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
The aim of the present work is to establish the relationship between laser cladding process parameters (Power, Process Speed and Powder feed rate) and AISI D2 tool steel metallurgical transformations, with the objective of optimizing the processing conditions during real reparation. It has been deposited H13 tool steel powder on some steel substrates with different initial metallurgical status (annealed or tempered) using a coaxial laser cladding system. The microstructure of the laser clad layer and substrate heat affected zone (HAZ) was characterized by Optical microscopy, Scanning Electron Microscopy (SEM) and Electron Backscattered Diffraction (EBSD). Results show that the process parameters (power, process speed, feed rate ...) determine the dimensions of the clad layer and are related to the microstructure formation. Although it is simple to obtain geometrically acceptable clads (with the right shape and dimensions) in many cases occur some harmful effects as carbide dilution and non-equilibrium phases formation which modify the mechanical properties of the coating. Specifically, the presence of retained austenite in the substrate-coating interface is directly related to the cooling rate and implies a hardness diminution that must be avoided. It has been checked that initial metallurgical state of the substrate has a big influence in the final result of the deposition. Tempered substrates imply higher laser absorption and heat accumulation than the ones in annealed condition. This produces a bigger HAZ. For this reason, it is necessary to optimize process conditions for each reparation in order to improve the working behaviour of the component., The authors thank the Ministry of Education and Science for the financing of this investigation through project DPI2005-09244-C04-04 under the Industrial Production Programme of theNational Plan and its continuity with project MAT2008-06882-C04-04/MAT of the Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling of phase transformations of Ti6Al4V during laser metal deposition

  • Suárez, A.
  • Tobar, M. J.
  • Yañez, A.
  • Pérez, I
  • Sampedro, Jesús
  • Candel Bou, Juan José
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] The low density, excellent high temperature mechanical properties and good corrosion resistance of titanium and its alloys have led to a diversified range of successful applications. As a consequence, there is a demand of increasing the capabilities of processing such alloys. The laser cladding technique allows direct metal deposition with an excellent metallurgical bond and a pore free fine grained microstructure. A nonlinear transient thermo-metallurgical model was developed to study the technique with titanium alloys to get a better understanding of the thermal and metallurgical underlying aspects. The calculated temperatures and phase transformations are compared with experimental tests. © 2011 Published by Elsevier Ltd., This work is has been done under the research project MAT2008-06882-C04 funded by the Spanish government (MICIIN).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recent advances in laser surface treatment of titanium alloys

  • Candel Bou, Juan José
  • Amigó, Vicente|||0000-0002-2107-0273
This paper reviews progress over the last five years in the field of laser surface modification of titanium alloys. The authors analyze the effect of new laser technologies and new materials as tools for improving surface properties-specifically, biocompatibility and resistance to wear, corrosion, and high temperatures. The authors discuss the effect of laser processing parameters on the microstructure and compare the results obtained by various researchers. Therefore, an overview of the difficulties involved in the laser processing of titanium is provided with a discussion of future prospects. © 2011 Laser Institute of America., The authors wish to acknowledge the Spanish Ministry of Science and Innovation for funding this research through Project No. MAT2008-06882-C04-04 (part of the national minerals program). The authors also wish to acknowledge the support of the Generalitat Valenciana through Project No. ACOMP/2009/232. The translation of this paper was funded by the Universidad Politecnica de Valencia, Spain