Pasar al contenido principal

DESARROLLO DE MATRICES CEMENTICIAS MULTIFUNCIONALES MEDIANTE UTILIZACION DE NANOFIBRAS DE CARBON

MAT2009-10866

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Self-heating and deicing conductive cement. Experimental study and modeling

  • Gomis, J.
  • Galao Malo, Oscar
  • Gomis Yagües, Vicente
  • Zornoza, Emilio
  • Garcés, Pedro
  • Galao Malo, Oscar|||/items/e1f82d06-6a4f-42ac-ad03-b83d9a5d8ecf
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Gomis Yagües, Vicente|||/items/07dc75ee-3490-44ca-b212-dde5702788e0
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
This research studies the self-heating produced by the application of an electric current to conductive cement pastes with carbonaceous materials. The main parameters studied were: type and percentage of carbonaceous materials, effect of moisture, electrical resistance, power consumption, maximum temperature reached and its evolution and ice melting kinetics are the main parameters studied. A mathematical model is also proposed, which predicts that the degree of heating is adjustable with the applied voltage. Finally, the results have been applied to ensure that cementitious materials studied are feasible to control ice layers in transportation infrastructures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mechanical Properties and Durability of CNT Cement Composites

  • Camacho Ballesta, María del Carmen
  • Galao Malo, Oscar
  • Baeza, F. Javier
  • Zornoza, Emilio
  • Garcés, Pedro
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Galao Malo, Oscar|||/items/e1f82d06-6a4f-42ac-ad03-b83d9a5d8ecf
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
In the present paper, changes in mechanical properties of Portland cement-based mortars due to the addition of carbon nanotubes (CNT) and corrosion of embedded steel rebars in CNT cement pastes are reported. Bending strength, compression strength, porosity and density of mortars were determined and related to the CNT dosages. CNT cement paste specimens were exposed to carbonation and chloride attacks, and results on steel corrosion rate tests were related to CNT dosages. The increase in CNT content implies no significant variations of mechanical properties but higher steel corrosion intensities were observed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efecto de la adición de nanofibras de carbono en las propiedades mecánicas y de durabilidad de materiales cementantes, Effect of carbon nanofiber addition in the mechanical properties and durability of cementitious materials

  • Galao Malo, Oscar
  • Zornoza, Emilio
  • Baeza, F. Javier
  • Bernabéu Gonzálvez, Ana
  • Garcés, Pedro
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Galao Malo, Oscar|||/items/e1f82d06-6a4f-42ac-ad03-b83d9a5d8ecf
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
En este artículo se han estudiado los cambios en las propiedades mecánicas de los morteros de cemento Portland debido a la adición de nanofibras de carbono (NFC). Se han determinado las resistencias a flexotracción y a compresión de los morteros en relación a la cantidad de NFC añadidas a la mezcla, al tiempo de curado y a la porosidad y densidad de los mismos. Además se han investigado los niveles de corrosión de barras de acero embebidas en pastas de cemento con NFC expuestos al ataque por carbonatación y por ingreso de cloruros. El aumento en el porcentaje de NFC añadido se traduce en un aumento la intensidad de corrosión registrada y una mejora de las propiedades mecánicas.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Strain and damage sensing properties on multifunctional cement composites with CNF admixture

  • Galao Malo, Oscar
  • Baeza, F. Javier
  • Zornoza, Emilio
  • Garcés, Pedro
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Galao Malo, Oscar|||/items/e1f82d06-6a4f-42ac-ad03-b83d9a5d8ecf
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
Both strain and damage sensing properties on carbon nanofiber cement composites (CNFCC) are reported in the present paper. Strain sensing tests were first made on the material’s elastic range. The applied loading levels have been previously calculated from mechanical strength tests. The effect of several variables on the strain-sensing function was studied, e.g. cement pastes curing age, current density, loading rate or maximum stress applied. All these parameters were discussed using the gage factor as reference. After this first set of elastic experiments, the same specimens were gradually loaded until material’s failure. At the same time both strain and resistivity were measured. The former was controlled using strain gages, and the latter using a multimeter on a four probe setup. The aim of these tests was to prove the sensitivity of these CNF composites to sense their own damage, i.e. check the possibility of fabricating structural damage sensors with CNFCC’s. All samples with different CNF dosages showed good strain-sensing capacities for curing periods of 28 days. Furthermore, a 2%CNF reinforced cement paste has been sensitive to its own structural damage.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Feasibility of electrochemical chloride extraction from structural reinforced concrete using a sprayed conductive graphite powder–cement paste as anode

  • Cañón, A.
  • Garcés, Pedro
  • Climent, Miguel-Ángel
  • Carmona Calero, Jesús
  • Zornoza, Emilio
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
This article summarizes research on the application of a conductive cement paste as an anode in the now classical technique of electrochemical extraction of chlorides applied to a concrete structural element by spraying the paste on the surface of a concrete structural element, a pillar. Sprayed conductive cement paste, by adding graphite powder, is particularly useful to treat sizable vertical surfaces such are structural supports. Outcomes indicate that this kind of anode not only provides electrochemical chloride removal with similar efficiency, but also is able to retain moisture even without the use of a continuous dampening system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shape Effect of Electrochemical Chloride Extraction in Structural Reinforced Concrete Elements Using a New Cement-Based Anodic System

  • Carmona Calero, Jesús
  • Climent, Miguel-Ángel
  • Anton, Carlos
  • Vera Almenar, Guillem de
  • Garcés, Pedro
  • Anton, Carlos|||/items/98677460-0003-4114-a75b-b2870605580a
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
This article shows the research carried out by the authors focused on how the shape of structural reinforced concrete elements treated with electrochemical chloride extraction can affect the efficiency of this process. Assuming the current use of different anode systems, the present study considers the comparison of results between conventional anodes based on Ti-RuO2 wire mesh and a cement-based anodic system such as a paste of graphite-cement. Reinforced concrete elements of a meter length were molded to serve as laboratory specimens, to closely represent authentic structural supports, with circular and rectangular sections. Results confirm almost equal performances for both types of anode systems when electrochemical chloride extraction is applied to isotropic structural elements. In the case of anisotropic ones, such as rectangular sections with no uniformly distributed rebar, differences in electrical flow density were detected during the treatment. Those differences were more extreme for Ti-RuO2 mesh anode system. This particular shape effect is evidenced by obtaining the efficiencies of electrochemical chloride extraction in different points of specimens.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon Nanofiber Cement Sensors to Detect Strain and Damage of Concrete Specimens Under Compression

  • Galao Malo, Oscar
  • Baeza, F. Javier
  • Zornoza, Emilio
  • Garcés, Pedro
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Galao Malo, Oscar|||/items/e1f82d06-6a4f-42ac-ad03-b83d9a5d8ecf
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
Cement composites with nano-additions have been vastly studied for their functional applications, such as strain and damage sensing. The capacity of a carbon nanofiber (CNF) cement paste has already been tested. However, this study is focused on the use of CNF cement composites as sensors in regular concrete samples. Different measuring techniques and humidity conditions of CNF samples were tested to optimize the strain and damage sensing of this material. In the strain sensing tests (for compressive stresses up to 10 MPa), the response depends on the maximum stress applied. The material was more sensitive at higher loads. Furthermore, the actual load time history did not influence the electrical response, and similar curves were obtained for different test configurations. On the other hand, damage sensing tests proved the capability of CNF cement composites to measure the strain level of concrete samples, even for loads close to the material’s strength. Some problems were detected in the strain transmission between sensor and concrete specimens, which will require specific calibration of each sensor one attached to the structure.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficiency of a conductive cement-based anodic system for the application of cathodic protection, cathodic prevention and electrochemical chloride extraction to control corrosion in reinforced concrete structures

  • Carmona Calero, Jesús
  • Garcés, Pedro
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
This article describes the research carried out regarding the application of cathodic protection (CP) and cathodic prevention (CPrev), in some cases with a pre-treatment of electrochemical chloride extraction (ECE), on representative specimens of reinforced concrete structures, using an anodic system consisting of a graphite-cement paste applied as a coating on the surface. The aim of this research is to find out the competence of this anode for the aforementioned electrochemical treatments. The efficiency of this anode has been clearly demonstrated, as well as its capability to apply a combined process of ECE and after CP.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Self-heating function of carbon nanofiber cement pastes, Función de calefacción en pastas de cemento con adición de nanofibras de carbono

  • Galao Malo, Oscar
  • Baeza, F. Javier
  • Zornoza, Emilio
  • Garcés, Pedro
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Galao Malo, Oscar|||/items/e1f82d06-6a4f-42ac-ad03-b83d9a5d8ecf
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
The viability of carbon nanofiber (CNF) composites in cement matrices as a self-heating material is reported in this paper. This functional application would allow the use of CNF cement composites as a heating element in buildings, or for deicing pavements of civil engineering transport infrastructures, such as highways or airport runways. Cement pastes with the addition of different CNF dosages (from 0 to 5% by cement mass) have been prepared. Afterwards, tests were run at different fixed voltages (50, 100 and 150V), and the temperature of the specimens was registered. Also the possibility of using a casting method like shotcrete, instead of just pouring the fresh mix into the mild (with no system’s efficiency loss expected) was studied. Temperatures up to 138 °C were registered during shotcrete-5% CNF cement paste tests (showing initial 10 °C/min heating rates). However a minimum voltage was required in order to achieve a proper system functioning.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Performance of cement-based sensors with CNT for strain sensing

  • Camacho Ballesta, María del Carmen
  • Zornoza, Emilio
  • Garcés, Pedro
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
Strain-sensing functions of Portland cement pastes with different dosages of carbon nanotubes (CNT) are systematically studied. This is one of the relevant functions that multifunctional composites are able to develop when a conductive addition is included in the cement matrix. Strain sensing refers to the ability of a structural material to sense its own condition, such as strain or stress, through the piezoresistive behaviour (change of volume electrical resistivity when it is subjected to a force). CNTs, which possess exceptional electromechanical properties, are considered as a promising addition for practical applications such as structural health and load monitoring. Nevertheless, there is still an important challenge regarding CNT cement composite fabrication: achieving their effective dispersion. This point is addressed by means of a comparison between different physical and chemical dispersion methods. The technique used for that purpose is light-scattering particle size analysis. After selecting the optimal dispersing procedure, the effect on the strain-sensing properties of CNT reinforced cement pastes was studied for the following variables: CNT dosage, curing age, current intensity, loading rate and maximum stress applied. All these parameters are discussed taking gauge factor value as the reference.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Self-sensing properties of alkali activated blast furnace slag (BFS) composites reinforced with carbon fibers

  • Vilaplana, Josep Lluís
  • Baeza, F. Javier
  • Galao Malo, Oscar
  • Zornoza, Emilio
  • Garcés, Pedro
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Galao Malo, Oscar|||/items/e1f82d06-6a4f-42ac-ad03-b83d9a5d8ecf
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
In recent years, several researchers have shown the good performance of alkali activated slag cement and concretes. Besides their good mechanical properties and durability, this type of cement is a good alternative to Portland cements if sustainability is considered. Moreover, multifunctional cement composites have been developed in the last decades for their functional applications (self-sensing, EMI shielding, self-heating, etc.). In this study, the strain and damage sensing possible application of carbon fiber reinforced alkali activated slag pastes has been evaluated. Cement pastes with 0, 0.29 and 0.58 vol % carbon fiber addition were prepared. Both carbon fiber dosages showed sensing properties. For strain sensing, function gage factors of up to 661 were calculated for compressive cycles. Furthermore, all composites with carbon fibers suffered a sudden increase in their resistivity when internal damages began, prior to any external signal of damage. Hence, this material may be suitable as strain or damage sensor.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Viabilidad de utilización de una pasta de cemento con nanofibras de carbono como ánodo en la extracción electroquímica de cloruros en hormigón, Usability of cement paste containing carbon nanofibres as an anode in electrochemical chloride extraction from concrete

  • Moral Delgado, Beatriz del
  • Galao Malo, Oscar
  • Anton, Carlos
  • Climent, Miguel-Ángel
  • Garcés, Pedro
  • Anton, Carlos|||/items/98677460-0003-4114-a75b-b2870605580a
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Galao Malo, Oscar|||/items/e1f82d06-6a4f-42ac-ad03-b83d9a5d8ecf
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Moral Delgado, Beatriz del|||/items/6f5d3ebc-3b27-4ed9-afe5-6833d6f812df
En la aplicación de la técnica de extracción electroquímica de cloruros (EEC), tradicionalmente se ha venido empleando como ánodo externo una malla de Ti-RuO2. En este artículo se aportan los resultados de investigaciones basadas en la utilización de ánodos formados por pasta de cemento conductora con adición de nanofibras de carbono (NFC) y su aplicación en EEC. Las experiencias se desarrollaron en probetas de hormigón contaminado previamente con cloruro. Las eficiencias alcanzadas se compararon con las obtenidas empleando un ánodo tradicional (Ti-RuO2), así como pastas de cemento con adición de otros materiales carbonosos. Los resultados muestran la viabilidad en la utilización de la pasta de cemento conductora con NFC como ánodo en la aplicación en EEC en hormigón, encontrándose eficiencias similares a las obtenidas con la tradicional malla de Ti-RuO2 pero teniendo la ventaja añadida sobre esta de que es posible adaptarla a geometrías estructurales complejas al ser aplicada en forma de pasta.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influence of different ways of chloride contamination on the efficiency of cathodic protection applied on structural reinforced concrete elements

  • Carmona Calero, Jesús
  • Climent, Miguel-Ángel
  • Garcés, Pedro
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
Cathodic protection is a method to protect reinforced concrete structures located in saline environments against corrosion effect produced by Cl− penetration. But there are significant differences among these aggressive environments. The aim of this article is to show how different ways of saline contamination can affect the efficiency of cathodic protection. For this research, a series of laboratory specimens representing structural elements were subjected to two versions of cathodic protection (cathodic protection strictly speaking, and cathodic prevention), while two different ways of saline contamination were applied (permanent immersion in a NaCl solution and periodic pouring of discrete amounts of a NaCl solution in atmospheric exposure). Depending on the saline environment, differences in the efficiency of cathodic protection were detected. Results can be useful to determine the specific features of the cathodic protection to be applied in each case, taking into account both the initial Cl− content of the structural element and the particular saline environment where it is located.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of aspect ratio on strain sensing capacity of carbon fiber reinforced cement composites

  • Baeza, F. Javier
  • Galao Malo, Oscar
  • Zornoza, Emilio
  • Garcés, Pedro
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Galao Malo, Oscar|||/items/e1f82d06-6a4f-42ac-ad03-b83d9a5d8ecf
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
The electrical resistivity of carbon fiber reinforced cement composites (CFRCCs) has been widely studied, because of their utility as multifunctional materials. The percolation phenomenon has also been reported and modeled when the electrical behavior of those materials had to be characterized. Amongst the multiple applications of multifunctional cement composites the ability of a CFRCC to act as a strain sensor is attractive. This paper provides experimental data relating self-sensing function and percolation threshold, and studying the effect of fiber aspect ratio on both phenomena. Higher fiber slenderness permitted percolation at lower carbon fiber addition, affected mechanical properties and improved strain-sensing sensitivity of CFRCC, which was also improved if percolation had not been achieved.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Graphite–Cement Paste: A New Coating of Reinforced Concrete Structural Elements for the Application of Electrochemical Anti-Corrosion Treatments

  • Climent, Miguel-Ángel
  • Carmona Calero, Jesús
  • Garcés, Pedro
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
This paper reviews research carried out towards the development of a novel conductive coating for reinforced concrete structures in order to enable the application of electrochemical anti-corrosion treatments. The coating is composed of a hardened paste containing graphite powder and cement. The applied techniques were electrochemical chloride extraction (ECE), cathodic protection (CP), and cathodic prevention, as well as combined treatments such as ECE-CP. This research has demonstrated their efficiency when using the new conductive coating as an anode system. The influence of the shape of the structural elements on the performance of the electrochemical treatments was also studied. Several characteristics of the coating have been determined, such as conductivity, durability, adhesion to the concrete surfaces, and ease of application. The results demonstrate the adequacy of using this coating as the anode for anti-corrosion treatments on reinforced concrete structural elements of different shapes, for the purpose of extending service life.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Service life increase of reinforced concrete structures exposed to marine environments through the application of electrochemical techniques, Alargamiento de la vida útil de estructuras de hormigón armado expuestas a ambientes marinos mediante la aplicación de técnicas electroquímicas, Extensão da vida útil de estruturas de concreto armado expostas a ambientes marinhos através da aplicação de técnicas eletroquímicas

  • Garcés, Pedro
  • Climent, Miguel-Ángel
  • Carmona Calero, Jesús
  • Sánchez de Rojas Noguera, María José
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
In this work, the feasibility of a combined treatment of electrochemical chloride extraction (ECE) and cathodic protection (CP) in reinforced concrete structures using a conductive cement-graphite paste as anode has been studied. It has been proven that the prior application of an electrochemical chloride extraction treatment leads to greater durability of the anode. It has been shown that for reinforced concrete structures located in aggressive marine environments, the combination of electrochemical treatments, first ECE to reduce the chloride content and then CP to maintain passivation conditions, is capable of providing adequate protection conditions for the reinforcement, provided that the appropriate current density value is applied, according to the average content of chlorides present in the reinforced concrete structures.