Pasar al contenido principal

APLICACION DE TECNICAS ULTRASONICAS NO LINEALES A LA DETECCION DE LA FISURACION EN HORMIGON

BIA2016-80982-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Volcanic Powder as a Cement Replacement for the Development of Sustainable Mortars

  • Letelier, Viviana
  • Ortega, José Marcos
  • Tremiño, Rosa Maria
  • Henriquéz-Jara, Bastián I.
  • Fustos, Ivo
  • Moriconi, Giacomo
  • Climent, Miguel Ángel
  • Sánchez, Isidro
  • Real-Herraiz, Teresa Pilar|||0000-0003-2578-2902
[EN] Currently, reduction of environmental effects of the cement industry is an issue of global interest and one of the alternatives is to replace clinker with additions such as volcanic powder. The purpose of this work is to study the influence of up to 400 hardening days of volcanic powder, obtained from the last eruption of the Calbuco volcano (Chile), on the pore structure, mechanical performance, and durability-related properties of mortars which incorporate up to 20% volcanic powder as a substitution for clinker. In addition, an evaluation of greenhouse gases emissions was performed in order to quantify the possible environmental benefits of incorporating the volcanic powder in the mortars. The results obtained indicated that mortars with contents of 10% and 20% of volcanic powder had adequate service properties and improved all durability-related properties overall as compared with those noted for ordinary Portland cement. Additionally, the use of up to 20% volcanic powder makes it possible to reduce the CO2 emissions of mortars by almost 20%, demonstrating the advantages of incorporating this addition in mortars., This research was funded by the Universidad de La Frontera (Chile) (grant code DI19-0019, project entitled "Desarrollo de una dosificacion de morteros con baja conductividad termica para utilizar en prefabricados"), by the Conselleria de Educacion, Investigacion, Cultura y Deporte (at present renamed as Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) de la Generalitat Valenciana (Spain) (grant code GV/2019/070), by the Spanish Agencia Estatal de Investigacion (grant code BIA2016-80982-R) and by the European Regional Development Fund (grant code BIA2016-80982-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of Red Mud Addition in the Microstructure, Durability and Mechanical Performance of Cement Mortars

  • Ortega, J. M.
  • Cabeza, Marta
  • Tenza-Abril, Antonio José
  • Climent, Miguel Ángel
  • Sanchez, Isidro
  • Real-Herraiz, Teresa Pilar|||0000-0003-2578-2902
[EN] Recently, there has been a great effort to incorporate industrial waste into cement-based materials to reach a more sustainable cement industry. In this regard, the Bayer process of obtaining alumina from bauxite generates huge amounts of waste called red mud. Few research articles have pointed out the possibility that red mud has pozzolanic activity. In view of that, the objective of this research is to analyse the short-term effects in the pore structure, mechanical performance and durability of mortars which incorporate up to 20% of red mud as a clinker replacement. As a reference, ordinary Portland cement and fly ash Portland cement mortars were also studied. The microstructure was characterised through mercury intrusion porosimetry and non-destructive impedance spectroscopy, which has not previously been used for studying the pore network evolution of red mud cement-based materials. The possible pozzolanic activity of red mud has been checked using differential scanning calorimetry. The non-steady state chloride migration coefficient and the mechanical properties were studied too. According to the results obtained, the addition of red mud entailed a greater microstructure refinement of the mortar, did not worsen the resistance against chloride ingress and reduced the compressive strength compared to control binders., Part of this research was funded by the Spanish Agencia Estatal de Investigacion (grant code BIA2016-80982-R) and by the European Regional Development Fund (grant code BIA2016-80982-R).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effects of Red Mud Addition in the Microstructure, Durability and Mechanical Performance of Cement Mortars

  • Ortega, José Marcos
  • Cabeza, Marta
  • Tenza-Abril, Antonio José
  • Real, Teresa
  • Climent, Miguel-Ángel
  • Sánchez, Isidro
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
  • Tenza-Abril, Antonio José|||/items/07e0951f-fcaa-4f60-8f86-1d0ce5ca3f30
Recently, there has been a great effort to incorporate industrial waste into cement-based materials to reach a more sustainable cement industry. In this regard, the Bayer process of obtaining alumina from bauxite generates huge amounts of waste called red mud. Few research articles have pointed out the possibility that red mud has pozzolanic activity. In view of that, the objective of this research is to analyse the short-term effects in the pore structure, mechanical performance and durability of mortars which incorporate up to 20% of red mud as a clinker replacement. As a reference, ordinary Portland cement and fly ash Portland cement mortars were also studied. The microstructure was characterised through mercury intrusion porosimetry and non-destructive impedance spectroscopy, which has not previously been used for studying the pore network evolution of red mud cement-based materials. The possible pozzolanic activity of red mud has been checked using differential scanning calorimetry. The non-steady state chloride migration coefficient and the mechanical properties were studied too. According to the results obtained, the addition of red mud entailed a greater microstructure refinement of the mortar, did not worsen the resistance against chloride ingress and reduced the compressive strength compared to control binders.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Non-Destructive Evaluation of Internal Sulphate Attack in Cement-Based Materials Applying Non-Linear Ultrasonic Techniques

  • Ortega, José Marcos
  • Miró, Marina
  • Poveda-Martínez, Pedro
  • Tenza-Abril, Antonio José
  • Ramis-Soriano, Jaime
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Miró, Marina|||/items/8229c9d5-d324-49bb-abbf-39ac75509173
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Poveda-Martínez, Pedro|||/items/4903b9bf-238c-455c-a2e7-bd307c9f5388
  • Ramis-Soriano, Jaime|||/items/f66772ed-9a3f-4478-91a1-1b3babaf0876
  • Tenza-Abril, Antonio José|||/items/07e0951f-fcaa-4f60-8f86-1d0ce5ca3f30
One of the most aggressive attacks to which cement-based materials can be exposed is that produced by sulphate. During this attack, expansive products are formed, causing volumetric strains in hardened materials, which brings microcracking and the reduction of their strength and durability. The use of non-destructive techniques for characterizing the microstructure of cement-based materials, and for following the development of deleterious processes which can affect them, has become an important research field. Among them, non-linear ultrasonic (NLU) techniques have shown to be useful for evaluating the material degradation. The aim of this work is to study the possibility of using the NLU technique for the non-destructive evaluation of initial development of internal sulphate attack in cement-based materials. Cement pastes were prepared using ordinary Portland cement, to which an appropriate amount of calcium sulphate 2-hydrate was added during the setting for producing an internal attack in the samples. Furthermore, its effects in the microstructure have been followed with mercury intrusion porosimetry. The expansion and linear ultrasonic pulse velocity were also determined. The preliminary results indicate that the NLU technique could be useful for studying the development of sulphate attacks in the short-term, complementing the information provided by other techniques.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Detecting cracks due to steel corrosion in reinforced cement mortar using intermodulation generation of ultrasonic waves

  • Miró, Marina
  • Eiras, Jesús N.
  • Poveda-Martínez, Pedro
  • Climent, Miguel-Ángel
  • Ramis-Soriano, Jaime
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Miró, Marina|||/items/8229c9d5-d324-49bb-abbf-39ac75509173
  • Poveda-Martínez, Pedro|||/items/4903b9bf-238c-455c-a2e7-bd307c9f5388
  • Ramis-Soriano, Jaime|||/items/f66772ed-9a3f-4478-91a1-1b3babaf0876
It has been studied the sensitivity of the technique of intermodulation of ultrasonic waves to detect different damage states of concrete due to embedded steel corrosion. Accelerated corrosion tests have been conducted on reinforced cement mortar specimens, while monitoring the appearance and width evolution of visible surface cracks and performing intermodulation measurements. It has been established a statistically acceptable “upper control limit” for the initial (undamaged) Intensity Modulation Ratio (R) values. After subjecting the samples to the corrosion tests, it was observed that the greater the degree of damage, the higher the value ranges and the variability degree of R.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cement mortar cracking under accelerated steel corrosion test: A mechanical and electrochemical model

  • Segovia-Eulogio, Enrique-Gonzalo
  • Vera Almenar, Guillem de
  • Miró, Marina
  • Ramis-Soriano, Jaime
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Miró, Marina|||/items/8229c9d5-d324-49bb-abbf-39ac75509173
  • Ramis-Soriano, Jaime|||/items/f66772ed-9a3f-4478-91a1-1b3babaf0876
  • Segovia-Eulogio, Enrique-Gonzalo|||/items/3cec973e-0579-40a3-b39c-6efe96fc686a
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
Corrosion of the embedded steel is one of the main degradation problems limiting the service life of reinforced and pre-stressed concrete structures. A model able to provide approximate predictions of the evolution of the cracking process can be useful for designing accelerated corrosion tests of reinforced cement mortar or concrete specimens. An electrochemical model has been used for describing the inner displacements and strains caused by the accumulation of steel corrosion products around the rebar during electrically accelerated corrosion tests of reinforced cement mortar specimens with simple geometries. Subsequently, a mechanical model using the XFEM-Based Crack Growth Simulation module of Ansys Software, has been implemented to describe the distribution of stresses in the cross-section of the specimens. The combined electrochemical and mechanical model has led to acceptable predictions of the time to appearance of the first surface crack and the evolution of crack width over time. This combined model, which needs only data of a few experimental parameters, and uses only readily accessible standard software, could easily be implemented with other experimental configurations. For a more realistic description of the distribution of the tensile stresses and of the whole cracking process, the model must consider the initiation of several cracks, at least eight, around the rebar perimeter. The inclusion in the model of higher number of cracks increases greatly the computation time and effort, and may lead to convergence difficulties.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effects of Environment in the Microstructure and Properties of Sustainable Mortars with Fly Ash and Slag after a 5-Year Exposure Period

  • Ortega, José Marcos
  • Tremiño Agulló, Rosa María
  • Sánchez, Isidro
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
Nowadays, getting a more environmentally sustainable cement production is one of the main goals of the cement industry. In this regard, the use of active additions, like fly ash and ground granulated blast-furnace slag, has become very popular. The behaviour, in the short-term, of cement-based materials with those additions is well-known when their hardening is produced under optimum conditions. However, real structures are exposed to different environments during long periods, which could affect the development of microstructures and the service properties of cementitious materials. The objective of this work is to analyse the effects in the long-term (up to 5 years approximately) produced by the exposure to different non-optimum laboratory conditions in the microstructure, mechanical and durability properties of mortars made with slag and fly ash commercial cements. Their performance was compared to that observed for ordinary Portland cement (OPC) mortars. The microstructure has been analysed using mercury intrusion porosimetry. The effective porosity, the capillary suction coefficient, the chloride migration coefficient and mechanical strengths were analysed too. According to the results, mortars prepared using slag and fly ash sustainable commercial cements, exposed to non-optimum conditions, show a good performance after 5-years hardening period, similar or even better than OPC mortars.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The Use of Volcanic Powder as a Cement Replacement for the Development of Sustainable Mortars

  • Letelier, Viviana
  • Ortega, José Marcos
  • Tremiño Agulló, Rosa María
  • Henríquez-Jara, Bastián I.
  • Fustos, Ivo
  • Real, Teresa
  • Moriconi, Giacomo
  • Climent, Miguel-Ángel
  • Sánchez, Isidro
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
Currently, reduction of environmental effects of the cement industry is an issue of global interest and one of the alternatives is to replace clinker with additions such as volcanic powder. The purpose of this work is to study the influence of up to 400 hardening days of volcanic powder, obtained from the last eruption of the Calbuco volcano (Chile), on the pore structure, mechanical performance, and durability-related properties of mortars which incorporate up to 20% volcanic powder as a substitution for clinker. In addition, an evaluation of greenhouse gases emissions was performed in order to quantify the possible environmental benefits of incorporating the volcanic powder in the mortars. The results obtained indicated that mortars with contents of 10% and 20% of volcanic powder had adequate service properties and improved all durability-related properties overall as compared with those noted for ordinary Portland cement. Additionally, the use of up to 20% volcanic powder makes it possible to reduce the CO2 emissions of mortars by almost 20%, demonstrating the advantages of incorporating this addition in mortars.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Early Detection of Corrosion-Induced Concrete Micro-cracking by Using Nonlinear Ultrasonic Techniques: Possible Influence of Mass Transport Processes

  • Climent, Miguel-Ángel
  • Miró, Marina
  • Eiras, Jesús N.
  • Poveda-Martínez, Pedro
  • Vera Almenar, Guillem de
  • Segovia-Eulogio, Enrique-Gonzalo
  • Ramis-Soriano, Jaime
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Miró, Marina|||/items/8229c9d5-d324-49bb-abbf-39ac75509173
  • Poveda-Martínez, Pedro|||/items/4903b9bf-238c-455c-a2e7-bd307c9f5388
  • Ramis-Soriano, Jaime|||/items/f66772ed-9a3f-4478-91a1-1b3babaf0876
  • Segovia-Eulogio, Enrique-Gonzalo|||/items/3cec973e-0579-40a3-b39c-6efe96fc686a
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
This work presents results allowing an unequivocal correlation of the observations of strong nonlinear elastic features of ultrasonic waves (values of the nonlinearity parameters exceeding the thresholds corresponding to undamaged states), with the critical events of the corrosion-induced surface cracking of reinforced cement-mortar specimens. These observations point to the possibility of the early detection of cracking using nonlinear ultrasonic (NLU) techniques. Experimental evidence is presented on the existence of active net mass transport processes, due to wick action, in the course of the corrosion tests, in the experimental conditions of this work. These phenomena might explain the observed abrupt shifting of the nonlinear parameter values (typically increasing and then decreasing post-peak, even reaching values typical of the undamaged state), and, partially, the high variability obtained for the values of the nonlinear parameters in damaged (cracked) states. Finally, some consequences are derived from the point of view of use of the NLU techniques in engineering practice, i.e., in surveys aimed at evaluating reinforced concrete structures affected by corrosion.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Use of Non-Linear Ultrasonic Techniques to Detect Cracks Due to Steel Corrosion in Reinforced Concrete Structures

  • Climent, Miguel-Ángel
  • Miró, Marina
  • Carbajo, Jesús
  • Poveda-Martínez, Pedro
  • Vera Almenar, Guillem de
  • Ramis-Soriano, Jaime
  • Carbajo, Jesús|||/items/0290ef2b-a2e9-4f49-a1bb-38aabf5895fe
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Miró, Marina|||/items/8229c9d5-d324-49bb-abbf-39ac75509173
  • Poveda-Martínez, Pedro|||/items/4903b9bf-238c-455c-a2e7-bd307c9f5388
  • Ramis-Soriano, Jaime|||/items/f66772ed-9a3f-4478-91a1-1b3babaf0876
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
In this work, non-linear ultrasonic wave techniques have been used to detect the onset of micro-cracking due to steel corrosion in model reinforced concrete elements. The specimens were of prismatic shape with a single steel rebar. The corrosion was forced by admixing an appropriate amount of sodium chloride at the moment of preparing the concrete mix, and by the application of an electric field, using a constant current density power source, and making the steel rebar work as the anode, and an external counter-electrode as the cathode. The preliminary results indicate that the onset of cracking seems to be accompanied by the appearance of higher-harmonic generation at the output signal (harmonic distortion), when the system is excited by the means of an ultrasound wave with a burst central frequency. Other phenomena related to the micro-cracks induced by corrosion, such is the parametric generation with respect to the fundamental amplitude, have not been observed until now.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Service life increase of reinforced concrete structures exposed to marine environments through the application of electrochemical techniques, Alargamiento de la vida útil de estructuras de hormigón armado expuestas a ambientes marinos mediante la aplicación de técnicas electroquímicas, Extensão da vida útil de estruturas de concreto armado expostas a ambientes marinhos através da aplicação de técnicas eletroquímicas

  • Garcés, Pedro
  • Climent, Miguel-Ángel
  • Carmona Calero, Jesús
  • Sánchez de Rojas Noguera, María José
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
In this work, the feasibility of a combined treatment of electrochemical chloride extraction (ECE) and cathodic protection (CP) in reinforced concrete structures using a conductive cement-graphite paste as anode has been studied. It has been proven that the prior application of an electrochemical chloride extraction treatment leads to greater durability of the anode. It has been shown that for reinforced concrete structures located in aggressive marine environments, the combination of electrochemical treatments, first ECE to reduce the chloride content and then CP to maintain passivation conditions, is capable of providing adequate protection conditions for the reinforcement, provided that the appropriate current density value is applied, according to the average content of chlorides present in the reinforced concrete structures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Use of Higher-Harmonic and Intermodulation Generation of Ultrasonic Waves to Detecting Cracks due to Steel Corrosion in Reinforced Cement Mortar

  • Climent, Miguel-Ángel
  • Miró, Marina
  • Poveda-Martínez, Pedro
  • Ramis-Soriano, Jaime
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Miró, Marina|||/items/8229c9d5-d324-49bb-abbf-39ac75509173
  • Poveda-Martínez, Pedro|||/items/4903b9bf-238c-455c-a2e7-bd307c9f5388
  • Ramis-Soriano, Jaime|||/items/f66772ed-9a3f-4478-91a1-1b3babaf0876
The aim of this work was to provide further confirmation of the possible use of non-linear ultrasonic techniques for detecting the cracking due to corrosion of steel reinforcements in concrete. To this end accelerated steel corrosion tests have been conducted on model reinforced cement mortar specimens, while monitoring the appearance and width evolution of visible surface cracks, and performing non-linear ultrasonic measurements based on the phenomena of harmonic distortion and intermodulation. A new parameter, based on the difference between the amplitude of the fundamental frequency and the sum of the amplitudes of all the first-order and second-order intermodulation products, has been proposed in this work. The results confirm that the appearance of visible surface micro-cracks are preceded and accompanied by the observation of strong non-linear features in the received signal. Furthermore, the new parameter proposed in this work is as efficient as the relative non-linearity parameters, classically used in harmonic distortion non-linear ultrasonic studies, for detecting the non-linear features associated with the critical events of the cracking of cement mortar due to embedded steel corrosion. A hypothesis has been developed considering the possible effect of the filling of the void space by liquid containing rust products after the formation of new cracks or the enlargement of its width. This filling process, which might be particularly enhanced by net convective transport of liquid, would explain the evolution of the values of all the parameters used for putting in evidence the non-linear elastic features after the critical events of the cracking process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Rebar Shape Time-Evolution During a Reinforced Concrete Corrosion Test: An Electrochemical Model

  • Vera Almenar, Guillem de
  • Miró, Marina
  • Segovia-Eulogio, Enrique-Gonzalo
  • Poveda-Martínez, Pedro
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Miró, Marina|||/items/8229c9d5-d324-49bb-abbf-39ac75509173
  • Poveda-Martínez, Pedro|||/items/4903b9bf-238c-455c-a2e7-bd307c9f5388
  • Segovia-Eulogio, Enrique-Gonzalo|||/items/3cec973e-0579-40a3-b39c-6efe96fc686a
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
An electrochemical model is presented to calculate the rebar shape time-evolution in reinforced mortar specimens during forced corrosion tests. This provides a more realistic description than the usually used geometric models. The current distribution along the rebar perimeter is calculated by using Finite Element Method (FEM) to solve Laplace equation. Then, Faraday’s law is used to relate current distribution to rebar volume increase due to corrosion products creation. The shape of the rebar section is obtained as a function of corrosion time.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Effects of red mud addition in the microstructure, durability and mechanical performance of cement mortars

  • Marcos Ortega, José
  • Cabeza Simó, Marta María
  • Tenza Abril, Antonio José
  • Real Herraiz, Teresa
  • Climent Llorca, Miguel Ángel
  • Sánchez Martín, Isidro
Recently, there has been a great effort to incorporate industrial waste into cement-based materials to reach a more sustainable cement industry. In this regard, the Bayer process of obtaining alumina from bauxite generates huge amounts of waste called red mud. Few research articles have pointed out the possibility that red mud has pozzolanic activity. In view of that, the objective of this research is to analyse the short-term effects in the pore structure, mechanical performance and durability of mortars which incorporate up to 20% of red mud as a clinker replacement. As a reference, ordinary Portland cement and fly ash Portland cement mortars were also studied. The microstructure was characterised through mercury intrusion porosimetry and non-destructive impedance spectroscopy, which has not previously been used for studying the pore network evolution of red mud cement-based materials. The possible pozzolanic activity of red mud has been checked using differential scanning calorimetry. The non-steady state chloride migration coefficient and the mechanical properties were studied too. According to the results obtained, the addition of red mud entailed a greater microstructure refinement of the mortar, did not worsen the resistance against chloride ingress and reduced the compressive strength compared to control binders., Agencia Estatal de Investigación | Ref. BIA2016-80982-R