Pasar al contenido principal

TRANSPORTE DE CLORUROS EN HORMIGONES EXPUESTOS A LA ATMOSFERA DE AMBIENTES MARINOS

BIA2010-20548

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Feasibility of electrochemical chloride extraction from structural reinforced concrete using a sprayed conductive graphite powder–cement paste as anode

  • Cañón, A.
  • Garcés, Pedro
  • Climent, Miguel-Ángel
  • Carmona Calero, Jesús
  • Zornoza, Emilio
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Zornoza, Emilio|||/items/d22c8fcf-7390-409d-8cdf-d14e5809d226
This article summarizes research on the application of a conductive cement paste as an anode in the now classical technique of electrochemical extraction of chlorides applied to a concrete structural element by spraying the paste on the surface of a concrete structural element, a pillar. Sprayed conductive cement paste, by adding graphite powder, is particularly useful to treat sizable vertical surfaces such are structural supports. Outcomes indicate that this kind of anode not only provides electrochemical chloride removal with similar efficiency, but also is able to retain moisture even without the use of a continuous dampening system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shape Effect of Electrochemical Chloride Extraction in Structural Reinforced Concrete Elements Using a New Cement-Based Anodic System

  • Carmona Calero, Jesús
  • Climent, Miguel-Ángel
  • Anton, Carlos
  • Vera Almenar, Guillem de
  • Garcés, Pedro
  • Anton, Carlos|||/items/98677460-0003-4114-a75b-b2870605580a
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
This article shows the research carried out by the authors focused on how the shape of structural reinforced concrete elements treated with electrochemical chloride extraction can affect the efficiency of this process. Assuming the current use of different anode systems, the present study considers the comparison of results between conventional anodes based on Ti-RuO2 wire mesh and a cement-based anodic system such as a paste of graphite-cement. Reinforced concrete elements of a meter length were molded to serve as laboratory specimens, to closely represent authentic structural supports, with circular and rectangular sections. Results confirm almost equal performances for both types of anode systems when electrochemical chloride extraction is applied to isotropic structural elements. In the case of anisotropic ones, such as rectangular sections with no uniformly distributed rebar, differences in electrical flow density were detected during the treatment. Those differences were more extreme for Ti-RuO2 mesh anode system. This particular shape effect is evidenced by obtaining the efficiencies of electrochemical chloride extraction in different points of specimens.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influencia de diferentes condiciones de curado en la estructura porosa y en las propiedades a edades tempranas de morteros que contienen ceniza volante y escoria de alto horno, Influence of different curing conditions on the pore structure and the early age properties of mortars with fly ash and blast-furnace slag

  • Ortega, José Marcos
  • Sánchez, Isidro
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
En este trabajo se ha estudiado la evolución de la microestructura, propiedades de durabilidad y resistencias mecánicas de morteros preparados con cementos comerciales, que contienen ceniza volante (entre un 21% y un 35%) y escoria de alto horno (entre un 66% y un 80%), expuestos a tres ambientes, un ambiente óptimo de laboratorio, y dos ambientes representativos del clima Atlántico y Mediterráneo respectivamente. Como referencia de comportamiento, también se ensayaron morteros de cemento Portland. La microestructura se caracterizó mediante porosimetría de intrusión de mercurio. En lo referente a la durabilidad, se estudiaron los coeficientes de absorción capilar y de migración de cloruros en estado no estacionario. También se determinó la resistencia a compresión de los morteros. Los ensayos se realizaron a 7, 28 y 90 días. La principal conclusión alcanzada es que los cementos con cenizas y escorias expuestos a condiciones ambientales representativas de los climas Atlántico y Mediterráneo, pueden desarrollar unas propiedades en servicio adecuadas al cabo de tres meses.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Impedance spectroscopy study of the effect of environmental conditions in the microstructure development of OPC and slag cement mortars

  • Ortega, José Marcos
  • Sánchez, Isidro
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
In this work, the microstructure of mortars made with an ordinary Portland cement and slag cement has been studied. These mortars were exposed to four different constant temperature and relative humidity environments during a 180-day period. The microstructure has been studied using impedance spectroscopy, and mercury intrusion porosimetry as a contrast technique. The impedance spectroscopy parameters make it possible to analyze the evolution of the solid fraction formation for the studied mortars and their results are confirmed with those obtained using mercury intrusion porosimetry. The development of the pore network of mortars is affected by the environment. However, slag cement mortars are more influenced by temperature while the relative humidity has a greater influence on the OPC mortars. The results show that slag cement mortars hardened under non-optimal environments have a more refined microstructure than OPC mortars for the studied environmental conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficiency of a conductive cement-based anodic system for the application of cathodic protection, cathodic prevention and electrochemical chloride extraction to control corrosion in reinforced concrete structures

  • Carmona Calero, Jesús
  • Garcés, Pedro
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
This article describes the research carried out regarding the application of cathodic protection (CP) and cathodic prevention (CPrev), in some cases with a pre-treatment of electrochemical chloride extraction (ECE), on representative specimens of reinforced concrete structures, using an anodic system consisting of a graphite-cement paste applied as a coating on the surface. The aim of this research is to find out the competence of this anode for the aforementioned electrochemical treatments. The efficiency of this anode has been clearly demonstrated, as well as its capability to apply a combined process of ECE and after CP.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Chloride Penetration Prediction in Concrete through an Empirical Model Based on Constant Flux Diffusion

  • Vera Almenar, Guillem de
  • Climent, Miguel-Ángel
  • Viqueira Pérez, Estanislao
  • Anton, Carlos
  • López García, María Pilar
  • Anton, Carlos|||/items/98677460-0003-4114-a75b-b2870605580a
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
An empirical model based on constant flux is presented for chloride transport through concrete in atmospherical exposure conditions. A continuous supply of chlorides is assumed as a constant mass flux at the exposed concrete surface. The model is applied to experimental chloride profiles obtained from a real marine structure, and results are compared with the classical error-function model. The proposed model shows some advantages. It yields a better predictive capacity than the classical error-function model. The previously observed chloride surface concentration increases are compatible with the proposed model. Nevertheless, the predictive capacity of the model can fail if the concrete microstructure changes with time. The model seems to be appropriate for well-maturated concretes exposed to a marine environment in atmospherical conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Durability and compressive strength of blast furnace slag-based cement grout for special geotechnical applications, Caracterización de las propiedades de durabilidad y resistencia a compresión de lechadas de cemento con escoria de alto horno para trabajos geotécnicos especiales

  • Ortega, José Marcos
  • Pastor Navarro, José Luis
  • Albaladejo Ruiz, Arturo
  • Sánchez, Isidro
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
Special foundations, most prominently micropiles and soil anchors, are frequently used in construction today. In Spain, the grout for these special technical applications is generally prepared with portland cement, although the codes and standards in place stipulate only the minimum compressive strength required, with no mention of cement type. Those texts also establish a range of acceptable water:cement ratios. In the present study, durability and compressive strength in cement grout prepared with blast furnace slag cement at different w/c ratios are characterised and compared to the findings for a reference portland cement grout. The results show that slag grout exhibits greater durability than the portland cement material and complies with the compressive strength requirements laid down in the respective codes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effects of Environment in the Microstructure and Properties of Sustainable Mortars with Fly Ash and Slag after a 5-Year Exposure Period

  • Ortega, José Marcos
  • Tremiño Agulló, Rosa María
  • Sánchez, Isidro
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
Nowadays, getting a more environmentally sustainable cement production is one of the main goals of the cement industry. In this regard, the use of active additions, like fly ash and ground granulated blast-furnace slag, has become very popular. The behaviour, in the short-term, of cement-based materials with those additions is well-known when their hardening is produced under optimum conditions. However, real structures are exposed to different environments during long periods, which could affect the development of microstructures and the service properties of cementitious materials. The objective of this work is to analyse the effects in the long-term (up to 5 years approximately) produced by the exposure to different non-optimum laboratory conditions in the microstructure, mechanical and durability properties of mortars made with slag and fly ash commercial cements. Their performance was compared to that observed for ordinary Portland cement (OPC) mortars. The microstructure has been analysed using mercury intrusion porosimetry. The effective porosity, the capillary suction coefficient, the chloride migration coefficient and mechanical strengths were analysed too. According to the results, mortars prepared using slag and fly ash sustainable commercial cements, exposed to non-optimum conditions, show a good performance after 5-years hardening period, similar or even better than OPC mortars.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Depassivation time estimation in reinforced concrete structures exposed to chloride ingress: A probabilistic approach

  • Vera Almenar, Guillem de
  • Anton, Carlos
  • López García, María Pilar
  • Climent, Miguel-Ángel
  • Anton, Carlos|||/items/98677460-0003-4114-a75b-b2870605580a
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
Estimation of depassivation time is a key issue in corrosion prevention. A method to get a probabilistic model from a deterministic one is presented and applied to three simple models: square root of time (SRT), error function (EF) and constant flux (CF) models. Probability distributions of the involved random variables are needed as input parameters. Experimental data have been obtained from a concrete structure exposed to the atmospheric marine environment. These data are analysed to obtain the probability distributions of chloride transport parameters: penetration velocity k (SRT model), diffusion coefficient D (EF and CF models), surface chloride concentration CS (EF model), and chloride ingress flux J (CF model). These distributions are used to calculate the depassivation time probability distributions according to the three models and the orientation of the samples respect to the sea. This allows to estimate depassivation time for a given depassivation probability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Moisture Distribution in Partially Saturated Concrete Studied by Impedance Spectroscopy

  • Sánchez, Isidro
  • Anton, Carlos
  • Vera Almenar, Guillem de
  • Ortega, José Marcos
  • Climent, Miguel-Ángel
  • Anton, Carlos|||/items/98677460-0003-4114-a75b-b2870605580a
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
The moisture content and its spatial distribution has a great influence on the durability properties of concrete structures. Several non-destructive techniques have been used for the determination of the total water content, but moisture distribution is difficult to determine. In this paper impedance spectroscopy is used to study the water distribution in concrete samples with controlled and homogeneously distributed moisture contents. The technique is suitable for the determination of water distribution inside the sample, using the appropriate equivalent circuits. It is shown that using the selected drying procedures there is no change in the solid phase of the samples, although the technique can only be used for the qualitative study of variations in the solid phase when samples are too thick. The results of this work show that for a wide range of concrete percentages of saturation, from full to 18 % saturation, practically all the pores keep at least a thin layer of electrolyte covering their walls, since the capacitance measurement results are practically independent of the saturation degree.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Viabilidad de utilización de una pasta de cemento con nanofibras de carbono como ánodo en la extracción electroquímica de cloruros en hormigón, Usability of cement paste containing carbon nanofibres as an anode in electrochemical chloride extraction from concrete

  • Moral Delgado, Beatriz del
  • Galao Malo, Oscar
  • Anton, Carlos
  • Climent, Miguel-Ángel
  • Garcés, Pedro
  • Anton, Carlos|||/items/98677460-0003-4114-a75b-b2870605580a
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Galao Malo, Oscar|||/items/e1f82d06-6a4f-42ac-ad03-b83d9a5d8ecf
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
  • Moral Delgado, Beatriz del|||/items/6f5d3ebc-3b27-4ed9-afe5-6833d6f812df
En la aplicación de la técnica de extracción electroquímica de cloruros (EEC), tradicionalmente se ha venido empleando como ánodo externo una malla de Ti-RuO2. En este artículo se aportan los resultados de investigaciones basadas en la utilización de ánodos formados por pasta de cemento conductora con adición de nanofibras de carbono (NFC) y su aplicación en EEC. Las experiencias se desarrollaron en probetas de hormigón contaminado previamente con cloruro. Las eficiencias alcanzadas se compararon con las obtenidas empleando un ánodo tradicional (Ti-RuO2), así como pastas de cemento con adición de otros materiales carbonosos. Los resultados muestran la viabilidad en la utilización de la pasta de cemento conductora con NFC como ánodo en la aplicación en EEC en hormigón, encontrándose eficiencias similares a las obtenidas con la tradicional malla de Ti-RuO2 pero teniendo la ventaja añadida sobre esta de que es posible adaptarla a geometrías estructurales complejas al ser aplicada en forma de pasta.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Comparison Between Dcrit Considering the Abrupt Variation and Inflexion in the Concrete Mercury Intrusion Porosimetry Curve

  • Guimarães, André Tavares da Cunha
  • Vera Almenar, Guillem de
  • Rodrigues, F.T.
  • Anton, Carlos
  • Climent, Miguel-Ángel
  • Anton, Carlos|||/items/98677460-0003-4114-a75b-b2870605580a
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
Mercury intrusion porosimetry (MIP) has been widely used to evaluate the quality of concrete through the pore size distribution parameters. Two of these parameters are the critical pore diameter (Dcrit) and the percentage of the most interconnected net of pores compared to the total volume of pores. Some researchers consider Dcrit as the diameter obtained from the inflexion point of the cumulative mercury intrusion curve while others consider Dcrit as the diameter obtained from the point of abrupt variation in the same curve. This study aims to analyze two groups of concretes of varying w/c ratios, one cast with pozzolanic cement and another with high initial strength cement, in order to determine which of these diameters feature a better correlation with the quality parameters of the concretes. The concrete quality parameters used for the evaluations were (1) the w/c ratios and (2) chloride diffusion coefficients measured at approximately 90 days. MIP cumulative distributions of the same concretes were also measured at about 90 days, and Dcrit values were determined (1) from the point of abrupt variation and alternatively, (2) from the inflexion point of each of these plots. It was found that Dcrit values measured from the point of abrupt variation were useful indicators of the quality of the concrete, but the Dcrit values based on the inflexion points were not. Hence, it is recommended that Dcrit and the percentage of the most interconnected volume of pores should be obtained considering the point of abrupt variation of the cumulative curve of pore size distribution.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influence of different ways of chloride contamination on the efficiency of cathodic protection applied on structural reinforced concrete elements

  • Carmona Calero, Jesús
  • Climent, Miguel-Ángel
  • Garcés, Pedro
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
Cathodic protection is a method to protect reinforced concrete structures located in saline environments against corrosion effect produced by Cl− penetration. But there are significant differences among these aggressive environments. The aim of this article is to show how different ways of saline contamination can affect the efficiency of cathodic protection. For this research, a series of laboratory specimens representing structural elements were subjected to two versions of cathodic protection (cathodic protection strictly speaking, and cathodic prevention), while two different ways of saline contamination were applied (permanent immersion in a NaCl solution and periodic pouring of discrete amounts of a NaCl solution in atmospheric exposure). Depending on the saline environment, differences in the efficiency of cathodic protection were detected. Results can be useful to determine the specific features of the cathodic protection to be applied in each case, taking into account both the initial Cl− content of the structural element and the particular saline environment where it is located.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Microstructure and durability of fly ash cement grouts for micropiles

  • Pastor Navarro, José Luis
  • Ortega, José Marcos
  • Flor, María
  • López García, María Pilar
  • Sánchez, Isidro
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
This paper presents a study on the possibility of using fly ash cement as grouts for micropiles. This type of special geotechnical work is commonly used for many applications. Generally, micropiles grouts are prepared using Portland cement, although the standards do not restrict the cement type to use, as long as they achieve a strength requirement. In this research, fly ash cement grouts made with w:c ratios 0.40, 0.45, 0.50 and 0.55 were studied from 2 up to 90 days of age. Their microstructure was characterized using the non-destructive impedance spectroscopy technique, electrical resistivity, and mercury intrusion porosimetry. Their durability properties have been studied by determining the water penetration under pressure, and the chloride diffusion coefficient. The compressive strength was also measured and determined, and a maximum water:cement ratio, different for each cement type was obtained. All the results were compared to those obtained for Portland cement grouts. The results obtained confirm that the performance of micropiles made using fly ash cement grouts is adequate, and as it is well know the cements with mineral admixtures provide environmental benefits, so the use of cement including fly ash will contribute to the sustainability, with similar properties to those given by OPC.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influence of using slag cement on the microstructure and durability related properties of cement grouts for micropiles

  • Ortega, José Marcos
  • Albaladejo Ruiz, Arturo
  • Pastor Navarro, José Luis
  • Sánchez, Isidro
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
Today, the use of micropiles for different applications has become very common. In Spain, the cement grouts for micropiles are prepared using ordinary Portland cement and w:c ratio 0.5, although the micropiles standards do not restrict the cement type to use, provided that it reaches a certain compressive strength. In this study, the influence of using slag cement on the microstructure and durability related properties of cement grouts for micropiles have been studied until 90 hardening days, compared to an ordinary Portland cement. Finally, slag cement grouts showed good service properties, better than ordinary Portland cement ones.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

An improved procedure for obtaining and maintaining well characterized partial water saturation states on concrete samples to be used for mass transport tests

  • Anton, Carlos
  • Climent, Miguel-Ángel
  • Vera Almenar, Guillem de
  • Sánchez, Isidro
  • Andrade, Carmen
  • Anton, Carlos|||/items/98677460-0003-4114-a75b-b2870605580a
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
  • Vera Almenar, Guillem de|||/items/7220bc28-fcb2-4f1c-a8d1-39c7e51b6652
A conditioning procedure is proposed allowing to install into the concrete specimens any selected value of water saturation degree with homogeneous moisture distribution. This is achieved within the least time and the minimum alteration of the concrete specimens. The protocol has the following steps: obtaining basic drying data at 50 °C (water absorption capacity and drying curves); unidirectional drying of the specimens at 50 °C until reaching the target saturation degree values; redistribution phase in closed containers at 50 °C (with measurement of the quasi-equilibrium relative humidities); storage into controlled environment chambers until and during mass transport tests, if necessary. A water transport model is used to derive transport parameters of the tested materials from the drying data, i.e., relative permeabilities and apparent water diffusion coefficients. The model also allows calculating moisture profiles during isothermal drying and redistribution phases, thus allowing optimization of the redistribution times for obtaining homogeneous moisture distributions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Graphite–Cement Paste: A New Coating of Reinforced Concrete Structural Elements for the Application of Electrochemical Anti-Corrosion Treatments

  • Climent, Miguel-Ángel
  • Carmona Calero, Jesús
  • Garcés, Pedro
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Garcés, Pedro|||/items/7de2392a-ee03-4268-acd7-a511035defc3
This paper reviews research carried out towards the development of a novel conductive coating for reinforced concrete structures in order to enable the application of electrochemical anti-corrosion treatments. The coating is composed of a hardened paste containing graphite powder and cement. The applied techniques were electrochemical chloride extraction (ECE), cathodic protection (CP), and cathodic prevention, as well as combined treatments such as ECE-CP. This research has demonstrated their efficiency when using the new conductive coating as an anode system. The influence of the shape of the structural elements on the performance of the electrochemical treatments was also studied. Several characteristics of the coating have been determined, such as conductivity, durability, adhesion to the concrete surfaces, and ease of application. The results demonstrate the adequacy of using this coating as the anode for anti-corrosion treatments on reinforced concrete structural elements of different shapes, for the purpose of extending service life.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Non-Destructive Study of the Microstructural Effects of Sodium and Magnesium Sulphate Attack on Mortars Containing Silica Fume Using Impedance Spectroscopy

  • Williams, Mark
  • Ortega, José Marcos
  • Sánchez, Isidro
  • Cabeza, Marta
  • Climent, Miguel-Ángel
  • Climent, Miguel-Ángel|||/items/e85cc0b1-85b5-45a7-8949-fa16d269271f
  • Ortega, José Marcos|||/items/aaf3a7fd-4fce-4b2c-bf1c-d048bc7009b5
  • Sánchez, Isidro|||/items/0ce3f150-4e48-4f0a-9d0b-1f1b2025701c
The microstructural effects of exposure to a 15% magnesium sulphate, 15% sodium sulphate, and mixed solutions were observed in mortars with and without silica fume, using the non-destructive impedance spectroscopy technique. The non-destructive “Wenner” resistivity test and the classical mercury intrusion porosimetry were used as contrast techniques. The compressive strength of the mortars was also studied. In view of the results obtained, impedance spectroscopy was the most sensitive technique for detecting changes in the porous network of the studied mortars. The addition of silica fume results in a more refined microstructure and a higher compressive strength in mortars exposed to aggressive sulphate solutions.