Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 46
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co nanodot arrays grown on a GdAu2 template: Substrate/nanodot antiferromagnetic coupling

  • Fernández, Laura
  • Blanco-Rey, María
  • Ilyn, Max
  • Vitali, Lucia
  • Magaña, Ana
  • Correa, Alexander
  • Ohresser, Philippe
  • Ortega, J. Enrique
  • Ayuela, Andrés
  • Schiller, Frederik
Controlling anisotropy and exchange coupling in patterned magnetic nanostructures is the key for developing advanced magnetic storage and spintronic devices. We report on the antiferromagnetic interaction between a Co nanodot array and its supporting GdAu2 nanotemplate that induces large anisotropy values in individual Co nanodots. In clear contrast with nonmagnetic Au substrates, GdAu2 triggers an earlier switch from out-of-plane anisotropy in monatomic high dots to in-plane when the dot height becomes biatomic. © 2014 American Chemical Society., The authors acknowledge financial support from the Gipuzkoako Foru Aldundia (L.F. and M.B.-R.), the European Commission through Project No. FP7-PEOPLE-2010- RG276921 (M.B.-R.), the European Social Fund within the program JAE-Doc, the Spanish MINECO (MAT2013-46593-C6-4-P, FIS 2010-19609-C02-02), the Basque Government (IT-621-13, IT-627-13, IT366-07), SAIOTEK (SPEI2UN095), and ETORTEK (NANOIKER No. IE11-304). The MBE chamber on DEIMOS was funded by the Agence National de la Recherche, Grant ANR-05-NANO-073., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metallic thin films on stepped surfaces: lateral scattering of quantum well states

  • Schiller, Frederik
  • Abd El-Fattah, Zakaria M.
  • Schirone, S.
  • Lobo-Checa, Jorge
  • Urdanpilleta, Marta
  • Ruiz-Osés, Miguel
  • Cordón, J.
  • Corso, Martina
  • Sánchez-Portal, Daniel
  • Mugarza, Aitor
  • Ortega, J. Enrique
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence., Quantum well states of Ag films grown on stepped Au(111) surfaces are shown to undergo lateral scattering, in analogy with surface states of vicinal Ag(111). Applying angle resolved photoemission spectroscopy we observe quantum well bands with zone-folding and gap openings driven by surface/interface step lattice scattering. Experiments performed on a curved Au(111) substrate allow us to determine a subtle terrace-size effect, i.e., a fine step-density-dependent upward shift of quantum well bands. This energy shift is explained as mainly due to the periodically stepped crystal potential offset at the interface side of the film. Finally, the surface state of the stepped Ag film is analyzed with both photoemission and scanning tunneling microscopy. We observe that the stepped film interface also affects the surface state energy, which exhibits a larger terrace-size effect compared to surface states of bulk vicinal Ag(111)crystals., This work was supported in part by the Spanish Ministry of Economy (MINECO) through grants MAT2013–46593-C6–2-P, MAT2013–46593-C6–4-P, MAT2013–46593-C6–5-P, and FIS2010–19609-C02–02, by the German Sonderforschungsbereich SFB 1083, and by the Basque Government through Projects IT-621–13 and IT-756–13. ICN2 acknowledges support from the Severo Orchoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogen capture by porphyrins at the TiO2(110) surface

  • Lovat, Giacomo
  • Abadia, Mikel
  • Rogero, Celia
  • Vittadini, Andrea
  • Floreano, Luca
Metal-free porphyrin molecules adsorb on the rutile TiO(110) surface with their pyrrolic nitrogen atoms atop the O-bridge rows, whereas the iminic nitrogen atoms capture two additional hydrogen atoms. Hydrogenation occurs spontaneously at room temperature, irrespective of the distance of the polypyrrolic macrocycle from the surface, as varied by changing the porphyrin functionalization., We acknowledge support from the MIUR of Italy through PRIN project DESCARTES (no. 2010BNZ3F2), and by CINECA (ISCRA-B project E-TROPPO), from the Spanish Government (Grant MAT2013-46593-C6-4-P) and from the Basque Department of Education (Grant IT-621-13). M.A. is also grateful for financial support from DIPC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

X-ray photoemission analysis of clean and carbon monoxide-chemisorbed platinum(111) stepped surfaces using a curved crystal

  • Walther, Andrew L.
  • Schiller, Frederik
  • Corso, Martina
  • Lobo-Checa, Jorge
  • Cabrera-Sanfélix, Pepa
  • Sánchez-Portal, Daniel
  • Ortega, J. Enrique
This work is licensed under a Creative Commons Attribution 4.0 International License.-- et al., Surface chemistry and catalysis studies could significantly gain from the systematic variation of surface active sites, tested under the very same conditions. Curved crystals are excellent platforms to perform such systematics, which may in turn allow to better resolve fundamental properties and reveal new phenomena. This is demonstrated here for the carbon monoxide/platinum system. We curve a platinum crystal around the high-symmetry (111) direction and carry out photoemission scans on top. This renders the spatial core-level imaging of carbon monoxide adsorbed on a 'tunable' vicinal surface, allowing a straightforward visualization of the rich chemisorption phenomenology at steps and terraces. Through such photoemission images we probe a characteristic elastic strain variation at stepped surfaces, and unveil subtle stress-release effects on clean and covered vicinal surfaces. These results offer the prospect of applying the curved surface approach to rationally investigate the chemical activity of surfaces under real pressure conditions., We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT2013-46593-C6-4-P and MAT2013-46593-C6-2-P ), Basque Government (Grants IT621-13 and IT756-13). A.L.W. acknowledges support from the US Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-SC0012704. AXBR acknowledges support from the Basque Departamento de Educación and the UPV/EHU through the Zabalduz program. AXBR, PCS and DSP acknowledge the Deutsche Forschungsgemeinschaft through the Sonderforschungsbereich 1083., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable band alignment with unperturbed carrier mobility of on-surface synthesized organic semiconducting wires

  • Vasseur, Guillaume
  • Vitali, Lucia
  • Lobo-Checa, Jorge
  • Oteyza, Dimas G. de
  • Sedona, Francesco
  • Ortega, J. Enrique
This is an open access article published under an ACS AuthorChoice License.-- et al., The tunable properties of molecular materials place them among the favorites for a variety of future generation devices. In addition, to maintain the current trend of miniaturization of those devices, a departure from the present top-down production methods may soon be required and self-assembly appears among the most promising alternatives. On-surface synthesis unites the promises of molecular materials and of self-assembly, with the sturdiness of covalently bonded structures: An ideal scenario for future applications. Following this idea, we report the synthesis of functional extended nanowires by self-assembly. In particular, the products correspond to one-dimensional organic semiconductors. The uniaxial alignment provided by our substrate templates allows us to access with exquisite detail their electronic properties, including the full valence band dispersion, by combining local probes with spatial averaging techniques. We show how, by selectively doping the molecular precursors, the product's energy level alignment can be tuned without compromising the charge carrier's mobility., This work was partially funded by MIUR (PRIN 2010/11, Project 2010BNZ3F2: “DESCARTES”), by EU project PAMS (Agreement No. 610446), by the European Research Council (ERC) under the EU Horizon 2020 research and innovation programme (Grant Agreement No. 635919), by the European Community’s Seventh Framework Programme (FP7/2007-2013) CALIPSO under Grant Agreement No. 312284, by the Spanish Ministry of Science and Competitiveness (MINECO, MAT2013-46593-C6-6-P and MAT2013-46593-C6-4-P) and FEDER, by the Basque Government (Grant Nos. IT-621-13 and IT-627-13)) and by the University of Padova (Grant CPDA154322, Project AMNES)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hanle magnetoresistance in thin metal films with strong spin-orbit coupling

  • Vélez, Saül
  • Golovach, Vitaly N.
  • Bedoya-Pinto, Amilcar
  • Isasa, Miren
  • Sagasta, Edurne
  • Abadia, Mikel
  • Rogero, Celia
  • Hueso, Luis E.
  • Bergeret, F. Sebastian
  • Casanova, Félix
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY)., We report measurements of a new type of magnetoresistance in Pt and Ta thin films. The spin accumulation created at the surfaces of the film by the spin Hall effect decreases in a magnetic field because of the Hanle effect, resulting in an increase of the electrical resistance as predicted by Dyakonov [Phys. Rev. Lett. 99, 126601 (2007)]. The angular dependence of this magnetoresistance resembles the recently discovered spin Hall magnetoresistance in Pt/Y3Fe5O12 bilayers, although the presence of a ferromagnetic insulator is not required. We show that this Hanle magnetoresistance is an alternative simple way to quantitatively study the coupling between charge and spin currents in metals with strong spin-orbit coupling., This work was supported by the European Union 7th Framework Programme under NMP Project No. 263104-HINTS and the European Research Council (Project No. 257654-SPINTROS), by the Spanish Ministry of Economy and Competitiveness under Projects No. MAT2012-37638, No. FIS2011-28851-C02-02, No. FIS2014-55987-P, and No. MAT2013-46593-C6-4-P, and by the Basque Government under UPV/EHU Projects No. IT-756-13 and No. IT-621-13. M. I. and E. S. thank the Basque Government and the Spanish Ministry of Education, Culture and Sport, respectively, for a Ph.D. fellowship (Grants No. BFI-2011-106 and No. FPU14/03102)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular-level realignment in donor-acceptor bilayer blends on metals

  • Borghetti, Patrizia
  • Oteyza, Dimas G. de
  • Rogero, Celia
  • Goiri, Elizabeth
  • Verdini, Alberto
  • Cossaro, Albano
  • Floreano, Luca
  • Ortega, J. Enrique
Molecular bilayers made up of a donor-acceptor blend in contact with the metal and capped with a single-component layer show a tunable energy level alignment at both metal-organic and organic-organic interfaces. To ensure sharp heteromolecular interfaces, a contact layer is formed by a stable blend of pentacene (PEN) and perfluorinated copper phthalocyanine (FCuPc) on Au(111) and Ag(111) and of perfluoropentacene (PFP) and copper phthalocyanine (CuPc) on Ag(111). Core-level and valence band photoemission reveal that, upon capping with pure FCuPc, CuPc, and PEN, the electronic states of both contact and capping layers >realign> with respect to the monolayer and the multilayer references. The sign of the shift depends clearly on whether the capping layer is donor-like (PEN, CuPc) or acceptor-like (FCuPc). As revealed by NEXAFS, the shift in electronic levels of the contact layer upon capping leads to a spectral density variation across the Fermi edge (E); i.e., it induces molecule/metal charge transfer., This work was supported by Spanish Grant No. MAT2013-46593-C6-4-P, the Basque Government grant IT-621-13 and the MIUR of Italy through PRIN project DESCARTES (no. 2010BNZ3F2). We acknowledge funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under Grant No. 226716 and under grant agreement No. 312284., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interplay between steps and oxygen vacancies on curved TiO2(110)

  • Miccio, Luis A.
  • Abadia, Mikel
  • Piquero-Zulaica, Ignacio
  • Lobo-Checa, Jorge
  • Schiller, Frederik
  • Rogero, Celia
  • Sánchez-Portal, Daniel
  • Ortega, J. Enrique
et al., A vicinal rutile TiO(110) crystal with a smooth variation of atomic steps parallel to the [1-10] direction was analyzed locally with STM and ARPES. The step edge morphology changes across the samples, from [1-11] zigzag faceting to straight [1-10] steps. A step-bunching phase is attributed to an optimal (110) terrace width, where all bridge-bonded O atom vacancies (O vacs) vanish. The [1-10] steps terminate with a pair of 2-fold coordinated O atoms, which give rise to bright, triangular protrusions (S) in STM. The intensity of the Ti 3d-derived gap state correlates with the sum of O vacs plus S protrusions at steps, suggesting that both O vacs and steps contribute a similar effective charge to sample doping. The binding energy of the gap state shifts when going from the flat (110) surface toward densely stepped planes, pointing to differences in the Ti polaron near steps and at terraces., We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT2013-46593-C6-4-P and MAT2013-46593-C6-2-P) and the Basque Government (Grant IT621-13 and IT756-13). M.S. and U.D. acknowledge support from the ERC Advanced Grant “OxideSurfaces”. D.S.P. and M.M. acknowledge support from the Marie Curie ITN “THINFACE” and financial support by the Deutsche Forschungsgemeinschaft. through SFB 1083 “Structure and Dynamics of Internal Interfaces”., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of the BiAg2 surface alloy on lattice-mismatched interfaces

  • Abd El-Fattah, Zakaria M.
  • Lutz, Christopher P.
  • Piquero-Zulaica, Ignacio
  • Lobo-Checa, Jorge
  • Schiller, Frederik
  • Bentmann, Hendrik
  • Ortega, J. Enrique
  • Reinert, Friedrich
We report on the growth of a monolayer-thick BiAg2 surface alloy on thin Ag films grown on Pt(111) and Cu(111). Using low energy electron diffraction (LEED), angle resolved photoemission spectroscopy (ARPES), and scanning tunneling microscopy (STM) we show that the surface structure of the 13 ML Bi/x-ML Ag/Pt(111) system (x≥2) is strongly affected by the annealing temperature required to form the alloy. As judged from the characteristic (3×3)R30 LEED pattern, the BiAg2 alloy is partially formed at room temperature. A gentle, gradual increase in the annealing temperatures successively results in the formation of a pure BiAg2 phase, a combination of that phase with a (2×2) superstructure, and finally the pure (2×2) phase, which persists at higher annealing temperatures. These results complement recent work reporting the (2×2) as a predominant phase, and attributing the absence of BiAg2 alloy to the strained Ag/Pt interface. Likewise, we show that the growth of the BiAg2 alloy on similarly lattice-mismatched 1 and 2 ML Ag-Cu(111) interfaces also requires a low annealing temperature, whilst higher temperatures result in BiAg2 clustering and the formation of a BiCu2 alloy. The demonstration that the BiAg2 alloy can be formed on thin Ag films on different substrates presenting a strained interface has the prospect of serving as bases for technologically relevant systems, such as Rashba alloys interfaced with magnetic and semiconductor substrates., This work was supported by the Spanish Gouvernment (Grant No. MAT2013-46593-C6-4-P), the Basque Gouvernment (Grant No. IT621-13), and the Spanish Research Council (Grant No. CSIC-201560I022). Z.M.A. would like to acknowledge funding from DAAD and DIPC. P.L. would also like to acknowledge funding from the Deutsche Forschungsgemeinschaft via Project No.RE 1469/8-1., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Configuring electronic states in an atomically precise array of quantum boxes

  • Nowakowska, Sylwia
  • Piquero-Zulaica, Ignacio
  • Ortega, J. Enrique
  • Gade, Lutz H.
  • Lobo-Checa, Jorge
  • Jung, Thomas A.
Communication.-- et al., A 2D array of electronically coupled quantum boxes is fabricated by means of on-surface self-assembly assuring ultimate precision of each box. The quantum states embedded in the boxes are configured by adsorbates, whose occupancy is controlled with atomic precision. The electronic interbox coupling can be maintained or significantly reduced by proper arrangement of empty and filled boxes., The authors would like to acknowledge financial support from the Swiss Nanoscience Institute (SNI), Swiss National Science Foundation (Grants Nos. 200020-149713 and 206021-121461), the Spanish Ministry of Economy (Grant No. MAT2013-46593-C6-4-P), the Basque Government (Grant No. IT621-13), the São Paulo Research Foundation (Grant No. 2013/04855-0), Swiss Government Excellence Scholarship Program, Netherlands Organization for Scientific Research NWO (Chemical Sciences, VIDI-Grant No. 700.10.424), the European Research Council (ERC-2012-StG 307760-SURFPRO), University of Basel, University of Heidelberg, Linköping University, University of Groningen, Paul Scherrer Institute, and the Japan Science and Technology Agency (JST) “Precursory Research for Embryonic Science and Technology (PRESTO)” for a project of “Molecular technology and creation of new function.”, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

π band dispersion along conjugated organic nanowires synthesized on a metal oxide semiconductor

  • Vasseur, Guillaume
  • Abadia, Mikel
  • Miccio, Luis A.
  • Brede, Jens
  • Garcia-Lekue, Aran
  • Oteyza, Dimas G. de
  • Rogero, Celia
  • Lobo-Checa, Jorge
  • Ortega, J. Enrique
Surface-confined dehalogenation reactions are versatile bottom-up approaches for the synthesis of carbonbased nanostructures with predefined chemical properties. However, for devices generally requiring low-conductivity substrates, potential applications are so far severely hampered by the necessity of a metallic surface to catalyze the reactions. In this work we report the synthesis of ordered arrays of poly(p-phenylene) chains on the surface of semiconducting TiO(110) via a dehalogenative homocoupling of 4,4″- dibromoterphenyl precursors. The supramolecular phase is clearly distinguished from the polymeric one using low-energy electron diffraction and scanning tunneling microscopy as the substrate temperature used for deposition is varied. X-ray photoelectron spectroscopy of C 1s and Br 3d core levels traces the temperature of the onset of dehalogenation to around 475 K. Moreover, angle-resolved photoemission spectroscopy and tightbinding calculations identify a highly dispersive band characteristic of a substantial overlap between the precursor's π states along the polymer, considered as the fingerprint of a successful polymerization. Thus, these results establish the first spectroscopic evidence that atomically precise carbon-based nanostructures can readily be synthesized on top of a transition-metal oxide surface, opening the prospect for the bottom-up production of novel molecule-semiconductor devices., This work was supported by the Spanish Ministry of Economy (Grant No. MAT2013-46593-C6-4-P), the Basque Government (Grant No. IT-621-13), and the European Research Council under the EU Horizon 2020 research and innovation program (Grant Agreement No. 635919). We also acknowledge support from the Basque Department of Education, UPV/EHU (Grant No. IT-756-13), the Spanish Ministry of Science and Innovation (Grant No. MAT2013-46593-C6-2-P), and the European Union FP7-ICT Integrated Project PAMS (Contract No. 610446)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature dependence of the partially localized state in a 2D molecular nanoporous network

  • Piquero-Zulaica, Ignacio
  • Nowakowska, Sylwia
  • Ortega, J. Enrique
  • Stöhr, Meike
  • Gade, Lutz H.
  • Jung, Thomas A.
  • Lobo-Checa, Jorge
Two-dimensional organic and metal-organic nanoporous networks can scatter surface electrons, leading to their partial localization. Such quantum states are related to intrinsic surface states of the substrate material. We further corroborate this relation by studying the thermally induced energy shifts of the electronic band stemming from coupled quantum states hosted in a metal-organic array formed by a perylene derivative on Cu(111). We observe by angle-resolved photoemission spectroscopy (ARPES), that both, the Shockley and the partially localized states, shift by the same amount to higher binding energies upon decreasing the sample temperature, providing evidence of their common origin. Our experimental approach and results further support the use of surface states for modelling these systems, which are expected to provide new insight into the physics concerning partially confined electronic states: scattering processes, potential barrier strengths, excited state lifetimes or the influence of guest molecules., We acknowledge financial support from the Spanish Ministry of Economy (grant MAT2013-46593-C6-4-P), the Basque Government (grant IT621-13), the Spanish Research Council (CSIC-201560I022), the Swiss Nanoscience Institute (SNI), Swiss National Science Foundation (grants Nos. 200020-149713, 206021-121461), the Netherlands Organization for Scientific Research (NWO Vidi grant No. 700.10.424), the European Research Council (ERC-2012-StG 307760-SURFPRO) and the Paul Scherrer Institute., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High temperature ferromagnetism in a GdAg2 monolayer

  • Ormaza, Maider
  • Fernández, Laura
  • Ilyn, Max
  • Magaña, Ana
  • Xu, Bo
  • Verstraete, Matthieu J.
  • Gastaldo, Michele
  • Valbuena, Miguel A.
  • Mugarza, Aitor
  • Ayuela, Andrés
  • Vitali, Lucia
  • Blanco-Rey, María
  • Schiller, Frederik
  • Ortega, J. Enrique
et al., Materials that exhibit ferromagnetism, interfacial stability, and tunability are highly desired for the realization of emerging magnetoelectronic phenomena in heterostructures. Here we present the GdAg monolayer alloy, which possesses all such qualities. By combining X-ray absorption, Kerr effect, and angle-resolved photoemission with ab initio calculations, we have investigated the ferromagnetic nature of this class of Gd-based alloys. The Curie temperature can increase from 19 K in GdAu to a remarkably high 85 K in GdAg. We find that the exchange coupling between Gd atoms is barely affected by their full coordination with noble metal atoms, and instead, magnetic coupling is effectively mediated by noble metal-Gd hybrid s,p-d bands. The direct comparison between isostructural GdAu and GdAg monolayers explains how the higher degree of surface confinement and electron occupation of such hybrid s,p-d bands promote the high Curie temperature in the latter. Finally, the chemical composition and structural robustness of the GdAg alloy has been demonstrated by interfacing them with organic semiconductors or magnetic nanodots. These results encourage systematic investigations of rare-earth/noble metal surface alloys and interfaces, in order to exploit them in magnetoelectronic applications., This work was supported by the Spanish Government (MAT2013-46593-C6-4-P, MAT2013-46593-C6-5-P, FIS2013-48286-C02-02-P, FIS2013-48286-C02-01-P), the Basque Government (IT621-13,IT627-13,IT756-13), the Diputación de Gipuzkoa (RF-0061/2015), and the Deutsche Forschungsgemeinschaft (SFB 1083 “Structure and Dynamics of Internal Interfaces”). A.Mu., M.A.V., and M.G. acknowledge the Severo Ochoa program SEV-2013-0295. B.X. and M.J.V. acknowledge two A.R.C. grants (TheMoTherm 10/15-03 and AIMED 15/19-09) from the Communauté Francaise de ̧ Belgique. Computer time was made available by PRACE-2IP and 3IP (EU FP7 Grant No. RI-283493 and RI-312763), CECI, SEGI-ULg, and the DIPC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-induced effects in the electronic and spin properties of a monolayer of ferromagnetic GdAg2

  • Correa, Alexander
  • Xu, Bo
  • Verstraete, Matthieu J.
  • Vitali, Lucia
We report on the structural, electronic and magnetic properties of a monolayer of GdAg2, forming a moiré pattern on Ag(111). Combining scanning tunneling microscopy and ab initio spin-polarized calculations, we show that the electronic band structure can be shifted linearly via thermal controlled strain of the intra-layer atomic distance in the range of 1-7%, leading to lateral hetero-structuring. Furthermore, the coupling of the incommensurable GdAg2 alloy layer to the Ag(111) substrate leads to spatially varying atomic relaxation causing subsurface layer buckling, texturing of the electronic and spin properties, and inhomogeneity of the magnetic anisotropy energy across the layer. These results provide perspectives for control of electronic properties and magnetic ordering in atomically-thin layers., AC and LV acknowledge the financial support of the Spanish ministry of economy (MAT2013-46593-C6-4-P). MJhhV and BX acknowledge two ARC grants (TheMoTherm #10/15-03 and AIMED # 15/19-09) from the Communauté Française de Belgique, a PDR project (GA T.1077.15) from the Fonds National pour la Recherche Scientifique (Belgium). Computer time was provided by CECI, SEGI, Zenobe/CENAERO (Walloon region GA 1117545), and PRACE-2IP and 3IP (EU FP7 GA RI-283493 and RI-312763) on EPCC Archer., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-texturizing electronic properties of a 2-dimensional GdAu2 layer on Au(111): The role of out-of-plane atomic displacement

  • Correa, Alexander
  • Farnesi Camellone, Matteo
  • Barragán, Ana
  • Kumar, Abhishek
  • Cepek, Cinzia
  • Pedio, Maddalena
  • Fabris, Stefano
  • Vitali, Lucia
Here, we show that the electronic properties of a surface-supported 2-dimensional (2D) layer structure can self-texturize at nanoscale. The local electronic properties are determined by structural relaxation processes through variable adsorption stacking configurations. We demonstrate that the spatially modulated layer-buckling, which arises from the lattice mismatch and the layer/substrate coupling at the GdAu/Au(111) interface, is sufficient to locally open an energy gap of ∼0.5 eV at the Fermi level in an otherwise metallic layer. Additionally, this out-of-plane displacement of the Gd atoms patterns the character of the hybridized Gd-d states and shifts the center of mass of the Gd 4f multiplet proportionally to the lattice distortion. These findings demonstrate the close correlation between the electronic properties of the 2D-layer and its planarity. We demonstrate that the resulting template shows different chemical reactivities which may find important applications., This project is partially funded by the EU-H2020 research and innovation programme under grant agreement no. 654360, NFFA-Europe and the Spanish Ministry of Economy (MAT2013-46593-C6-4-P and MAT2016-78293-C6-5-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of active and stable oxygen reduction reaction catalysts by embedding CoxOy nanoparticles into nitrogen-doped carbon

  • Yang, Fan
  • Abadia, Mikel
  • Chen, Chaoqiu
  • Wang, Weike
  • Li, Le
  • Zhang, Lianbing
  • Rogero, Celia
  • Chuvilin, Andrey
  • Knez, Mato
The oxygen reduction reaction (ORR) is essential in research pertaining to life science and energy. In applications, platinum-based catalysts give ideal reactivity, but, in practice, are often subject to high costs and poor stability. Some cost-efficient transition metal oxides have exhibited excellent ORR reactivity, but the stability and durability of such alternative catalyst materials pose serious challenges. Here, we present a facile method to fabricate uniform Co x O y nanoparticles and embed them into N-doped carbon, which results in a composite of extraordinary stability and durability, while maintaining its high reactivity. The half-wave potential shows a negative shift of only 21 mV after 10,000 cycles, only one third of that observed for Pt/C (63 mV). Furthermore, after 100,000 s testing at a constant potential, the current decreases by only 17%, significantly less than for Pt/C (35%). The exceptional stability and durability results from the system architecture, which comprises a thin carbon shell that prevents agglomeration of the Co x O y nanoparticles and their detaching from the substrate., The authors acknowledge financial support by the Spanish Ministry of Economy and Competitivity (MINECO) (Nos. MAT2016-77393-R and MAT2013-46593-C6-4-P) and the Basque government (Nos. PI2013-56 and IT-621-13). M. K. acknowledges financial support through Marie Curie Actions (CIG) within project number 322158 (ARTEN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron refraction at lateral atomic interfaces

  • Abd El-Fattah, Zakaria M.
  • Kher-Elden, Mohammad A.
  • Yassin, O.
  • El-Okr, M. M.
  • Ortega, J. Enrique
  • García de Abajo, Francisco Javier
We present theoretical simulations of electron refraction at the lateral atomic interface between a 'homogeneous' Cu(111) surface and the >nanostructured> one-monolayer (ML) Ag/Cu(111) dislocation lattice. Calculations are performed for electron binding energies barely below the 1 ML Ag/Cu(111) M-point gap (binding energy E = 53 meV, below the Fermi level) and slightly above its Γ-point energy (E = 160 meV), both characterized by isotropic/circular constant energy surfaces. Using plane-wave-expansion and boundary-element methods, we show that electron refraction occurs at the interface, the Snell law is obeyed, and a total internal reflection occurs beyond the critical angle. Additionally, a weak negative refraction is observed for E = 53 meV electron energy at beam incidence higher than the critical angle. Such an interesting observation stems from the interface phase-matching and momentum conservation with the umklapp bands at the second Brillouin zone of the dislocation lattice. The present analysis is not restricted to our Cu-Ag/Cu model system but can be readily extended to technologically relevant interfaces with spin-polarized, highly featured, and anisotropic constant energy contours, such as those characteristic for Rashba systems and topological insulators., This work has been supported in part by the Spanish MINECO (Grant Nos. MAT2013–46593-C6–4-P, MAT2016–78293-C6–6-R, MAT2014-59096-P, and SEV2015-0522), the Basque Government (Grant No. IT621–13), the Catalan CERCA Program, Fundacio Privada Cellex, and AGAUR (Grant No. 2014 SGR 1400)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the relation between intramolecular conjugation and band dispersion in one-dimensional polymers

  • García-Fernández, Carlos
  • Sierda, Emil
  • Abadia, Mikel
  • Bugenhagen, Bernhard
  • Prosenc, Marc Heinrich
  • Wiesendanger, Roland
  • Bazarnik, Maciej
  • Ortega, J. Enrique
  • Brede, Jens
  • Matito, Eduard
  • Arnau, Andrés
Making use of the inherent surface anisotropy of different high index surface planes vicinal to the low index Au(111) orientation, one-dimensional polymers have been synthesized following established procedures from two different precursor molecules. The successful polymerization of both 4,4″-dibromo-p-terphenyl and 5,5′-dibromo-salophenato-Co(II) precursors into poly(p-phenylene) and poly[salophenato-Co(II)], respectively, has been confirmed by scanning tunneling microscopy and low energy electron diffraction. Angle-resolved photoemission spectroscopy data reveal a highly dispersive band in the case of poly(p-phenylene) while no significant dispersion is resolved for poly[salophenato-Co(II)]. On the basis of density functional theory calculations, we explain this observation as a result of a high conjugation along the aromatic phenyl groups in poly(p-phenylene) that is absent in the case of poly[salophenato-Co(II)], where intramolecular conjugation is interrupted in the salophenato-Co(II) unit. Furthermore, we make use of multicenter and delocalization indexes to characterize the electron mobility (corresponding to a high band dispersion) along different paths associated with individual molecular orbitals., The authors thank for technical and human support provided by IZO-SGI SGIker of UPV/EHU and European funding (ERDF and ESF). Financial support comes from Eusko Jaurlaritza (Basque Government) through the projects IT-588-13, IT-756-13, and IT621-13 as well as from the Spanish MINECO/FEDER through Grants MAT2013-46593-C6-4-P and MAT2016-78293-C6-6-R, as well as projects CTQ2014-52525-P and FIS2016-75862-P. E.S., M.B., and R.W. gratefully acknowledge financial support from the Office of Naval Research via Grant N00014-16-1-2900 and the Deutsche Forschungsgemeinschaft via SFB668-B4., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-surface oligomerization of self-terminating molecular chains for the design of spintronic devices

  • Sierda, Emil
  • Abadia, Mikel
  • Brede, Jens
  • Elsebach, Micha
  • Bugenhagen, Bernhard
  • Prosenc, Marc Heinrich
  • Bazarnik, Maciej
  • Wiesendanger, Roland
Molecular spintronics is currently attracting a lot of attention due to its great advantages over traditional electronics. A variety of self-assembled molecule-based devices are under development, but studies regarding the reliability of the growth process remain rare. Here, we present a method to control the length of molecular spintronic chains and to make their terminations chemically inert, thereby suppressing uncontrolled coupling to surface defects. The temperature evolution of chain formation was followed by X-ray photoelectron spectroscopy to determine optimal growth conditions. The final structures of the chains were then studied, using scanning tunneling microscopy, as a function of oligomerization conditions. We find that short chains are readily synthesized with high yields and that long chains, even exceeding 70mers, can be realized under optimized growth parameters, albeit with reduced yields., We gratefully acknowledge financial support from the Office of Naval Research via Grant No. N00014-16-1-2900, and the Deutsche Forschungsgemeinschaft via SFB668-B4. Moreover, M.A. and J.B. acknowledge funding from the Spanish MINECO under contract Nos. MAT2013-46593-C6-4-P and MAT2016-78293-C6-5-R as well as the Basque Government Grants IT621- 13 and IT-756-13., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-surface synthesis of a pure and long-range-ordered titanium(IV)-porphyrin contact layer on titanium dioxide

  • Lovat, Giacomo
  • Forrer, Daniel
  • Abadia, Mikel
  • Domínguez, Marcos
  • Casarin, Maurizio
  • Rogero, Celia
  • Vittadini, Andrea
  • Floreano, Luca
In this work, we show the possibility of tailoring the molecular arrangement, as well as chemical and structural modifications, of porphyrins at monolayer saturation coverage on TiO(110) by synchrotron photoemission spectroscopy, electron diffraction, STM topography, and DFT calculations. Free-base tetraphenylporphyrins (2H-TPP) adsorb on the oxygen rows, where they can spontaneously capture two additional hydrogen atoms at their iminic nitrogens (4H-TPP). Both 2H-TPP and 4H-TPP molecules aggregate into a commensurate phase at the saturation coverage of 1 ML. Upon sample heating, a self-metalation reaction sets in at 100 °C, yielding full metalation of the saturated monolayer at ∼200 °C. The Ti atoms are extracted from the substrate and, by simultaneous dehydrogenation of the pyrrolic nitrogen atoms, incorporated into the porphyrin macrocycle, where they remain coordinated to two underlying oxygen atoms. Neither the adsorption geometry (on-bridge, atop the oxygen rows) nor the molecular arrangement changes across the self-metalation transition up to 300 °C. On one hand, the robustness of this saturation phase makes it a promising system for implementation in applications for photocatalysis and photovoltaic devices. On the other hand, the possible manifestation of metal exchange with the very reactive Ti atoms must be taken into account when designing porphyrin-sensitized solar cells because the critical temperature for the onset of self-metalation is very close to the normal operating temperature of photovoltaic devices., We acknowledge support from the MIUR of Italy through PRIN Project DESCARTES (no. 2010BNZ3F2), from the Spanish Government (Grant MAT2013-46593-C6-4-P), and from the Basque Department of Education (Grant IT-621-13). M.A. also acknowledges the financial support of MPC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymerization of well-aligned organic nanowires on a ferromagnetic rare-earth surface alloy

  • Abadia, Mikel
  • Ilyn, Max
  • Piquero-Zulaica, Ignacio
  • Gargiani, Pierluigi
  • Rogero, Celia
  • Ortega, J. Enrique
  • Brede, Jens
The high reactivity of magnetic substrates toward molecular overlayers has so far inhibited the realization of more sophisticated on-surface reactions, thereby depriving these interfaces of a significant class of chemically tailored organics such as graphene nanoribbons, oligonuclear spin-chains, and metal-organic networks. Here, we present a multitechnique characterization of the polymerization of 4,4″-dibromo-p-terphenyl precursors into ordered poly(p-phenylene) arrays on top of the bimetallic GdAu surface alloy. The activation temperatures for bromine scission and subsequent homocoupling of molecular precursors were followed by temperature-dependent X-ray photoelectron spectroscopy. The structural characterizations of supramolecular and polymeric phases, performed by low-energy electron diffraction and scanning tunneling microscopy, establish an extraordinary degree of order extending into the mesoscale. Taking advantage of the high homogeneity, the electronic structure of the valence band was determined with angle-resolved photoemission spectroscopy. Importantly, the transition of localized molecular orbitals into a highly dispersive π-band, the fingerprint of successful polymerization, was observed while leaving all surface-related bands intact. Moreover, ferromagnetic ordering in the GdAu alloy was demonstrated for all phases by X-ray absorption spectroscopy. The transfer of well-established in situ methods for growing covalently bonded macromolecules with atomic precision onto magnetic rare-earth alloys is an important step toward toward studying and controlling intrinsic carbon- and rare-earth-based magnetism., We acknowledge funding from the Spanish MINECO under contract Nos. MAT2013-46593-C6-4-P and MAT2016-78293-C6-5-R as well as the Basque Government Grants IT621-13 and IT-756-13., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Precise engineering of quantum dot array coupling through their barrier widths

  • Piquero-Zulaica, Ignacio
  • Lobo-Checa, Jorge
  • Sadeghi, Ali
  • Abd El-Fattah, Zakaria M.
  • Mitsui, Chikahiko
  • Okamoto, Toshihiro
  • Pawlak, Rémy
  • Meier, Tobias
  • Arnau, Andrés
  • Ortega, J. Enrique
  • Takeya, Jun
  • Goedecker, Stefan
  • Meyer, Ernst
  • Kawai, Shigeki
Quantum dots are known to confine electrons within their structure. Whenever they periodically aggregate into arrays and cooperative interactions arise, novel quantum properties suitable for technological applications show up. Control over the potential barriers existing between neighboring quantum dots is therefore essential to alter their mutual crosstalk. Here we show that precise engineering of the barrier width can be experimentally achieved on surfaces by a single atom substitution in a haloaromatic compound, which in turn tunes the confinement properties through the degree of quantum dot intercoupling. We achieved this by generating self-assembled molecular nanoporous networks that confine the two-dimensional electron gas present at the surface. Indeed, these extended arrays form up on bulk surface and thin silver films alike, maintaining their overall interdot coupling. These findings pave the way to reach full control over two-dimensional electron gases by means of self-assembled molecular networks., This work was supported in part by the Spanish Ministry of Economy (grants MAT2013-46593-C6-4-P, MAT2016-78293-C6-6-R and FIS2013-48286-C2-1-P), by the Spanish Research Council (CSIC- 201560I022), by the Basque Government (grants IT621-13 and IT-756-13), by the Japan Science and Technology Agency (JST), ‘Precursory Research for Embryonic Science and Technology’ (PRESTO) for a project of ‘Molecular technology and creation of new function’, by JSPS KAKENHI Grant Number 15K21765, by the Swiss National Science Foundation, by the Swiss Nanoscience Institute, and by COST Action (European Cooperation in Science and Technology) MP1303. Swiss National Supercomputing Center in Lugano (Project s499 and s621) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible and irreversible reactions of trimethylaluminum with common organic functional groups as a model for molecular layer deposition and vapor phase infiltration

  • Yang, Fan
  • Brede, Jens
  • Ablat, Hayrensa
  • Abadia, Mikel
  • Zhang, Lianbing
  • Rogero, Celia
  • Elliott, Simon D.
  • Knez, Mato
Organic-inorganic hybrid materials are of great demand not at least for their enormous application potential in flexible devices. Atomic or molecular layer deposition (ALD or MLD) and vapor phase infiltration (VPI) offer novel pathways for the fabrication of such hybrids, but a clear understanding of the chemistry between the vaporized precursors and functional molecules is still lacking. In this work, the interactions between trimethylaluminum (TMA) and the organic functional groups -OH, -NH2, and -NO2 in the respective substituted phenyls, as well as their stability upon exposure to air are investigated. The experimental evidence agrees with theoretically predicted reaction pathways, showing that TMA initially binds to Lewis basic atoms of the investigated functional groups. Depending on the reaction energy barriers, the interaction between TMA and the investigated functional groups may result in either stable chemical bonding or intermediates that decompose upon exposure to humidity. This investigation contributes to the understanding of ALD/MLD and VPI processes at a molecular level and will support a better process optimization., The authors acknowledge the financial support by the Spanish ministry of economy and competitiveness (MINECO) through project numbers MAT2016-77393-R (including FEDER funds) and MAT2013-46593-C6-4-P and the Basque government through the project number IT-621-13. M.K. acknowledges the financial support through Marie Curie Actions (CIG) within project number 322158 (ARTEN). H.A. acknowledges the financial support from Henkel Ltd. and the Irish Research Council (Grant no. EPSPG/2012/507) and acknowledges access to the SFI funded computational resources at Tyndall National Institute. The authors acknowledge the support for collaboration through the COST action HERALD (MP1402)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Step-doubling at vicinal Ni(111) surfaces investigated with a curved crystal

  • Ilyn, Max
  • Magaña, Ana
  • Walther, Andrew L.
  • Lobo-Checa, Jorge
  • Oteyza, Dimas G. de
  • Schiller, Frederik
  • Ortega, J. Enrique
Vicinal surfaces may undergo structural transformations as a function of temperature or in the presence of adsorbates. Step-doubling in which monatomic steps pair up forming double-atom high staircases is the simplest example. Here we investigate the case of Ni(111) using a curved crystal surface, which allows us to explore the occurrence of step-doubling as a function of temperature and vicinal plane (miscut α and step type). We find a striking A-type ({100}-like microfacets) versus B-type ({111}-like) asymmetry toward step-doubling. The terrace-width distribution analysis performed from scanning tunneling microscopy data points to elastic step interactions overcoming entropic effects at very small miscut α in A-type vicinals, as compared to B-type steps. For A-type vicinals, we elaborate the temperature/miscut phase diagram, on which we establish a critical miscut αc = 9.3° for step-doubling to take place., We acknowledge financial support from the Spanish Ministry of Economy (Grant MAT2013-46593-C6-4-P) and Basque Government (Grant IT621-13)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain dependent light-off temperature in catalysis revealed by planar laser-induced fluorescence

  • Blomberg, Sara
  • Zetterberg, Johan
  • Zhou, Jianfeng
  • Merte, Lindsay R.
  • Gustafson, Johan
  • Shipilin, Mikhail
  • Trinchero, Adriana
  • Miccio, Luis A.
  • Magaña, Ana
  • Ilyn, Max
  • Schiller, Frederik
  • Ortega, J. Enrique
  • Bertram, Florian
  • Grönbeck, Henrik
  • Lundgren, Edvin
Understanding how specific atom sites on metal surfaces lower the energy barrier for chemical reactions is vital in catalysis. Studies on simplified model systems have shown that atoms arranged as steps on the surface play an important role in catalytic reactions, but a direct comparison of how the light-off temperature is affected by the atom orientation on the step has not yet been possible due to methodological constraints. Here we report in situ spatially resolved measurements of the CO production over a cylindrical-shaped Pd catalyst and show that the light-off temperature at different parts of the crystal depends on the step orientation of the two types of steps (named A and B). Our finding is supported by density functional theory calculations, revealing that the steps, in contrast to what has been previously reported in the literature, are not directly involved in the reaction onset but have the role of releasing stress., The authors thank the Knut and Alice Wallenberg Foundation, the Swedish Research Council, the Swedish Foundation for Strategic Research, and the Crafoord Foundation. Support by the MAX IV staff is gratefully acknowledged. The calculations were performed at C3SE through a SNIC grant. J.E.O. acknowledges support from the Spanish Ministry of Economy (MAT2013-46593-C6-4-P) and the Basque Government (IT621-13)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Symmetry, shape, and energy variations in frontier molecular orbitals at organic/metal interfaces: The case of F4TCNQ

  • Borghetti, Patrizia
  • Sarasola, Ane
  • Merino-Díez, Nestor
  • Vasseur, Guillaume
  • Floreano, Luca
  • Lobo-Checa, Jorge
  • Arnau, Andrés
  • Oteyza, Dimas G. de
  • Ortega, J. Enrique
Near edge X-ray absorption, valence and core-level photoemission, and density functional theory calculations are used to study molecular levels of tetracyano-2,3,5,6-tetrafluoroquinodimethane (FTCNQ) deposited on Ag(111) and BiAg/Ag(111). The high electron affinity of FTCNQ triggers a large static charge transfer from the substrate, and, more interestingly, hybridization with the substrate leads to a radical change of symmetry, shape, and energy of frontier molecular orbitals. The lowest unoccupied molecular orbital (LUMO) shifts below the Fermi energy, becoming the new highest occupied molecular orbital (n-HOMO), whereas the n-LUMO is defined by a hybrid band with mixed π∗ and σ∗ symmetries, localized at quinone rings and cyano groups, respectively. The presence of Bi influences the way the molecule contacts the substrate with the cyano group. The molecule/surface distance is closer and the bond more extended over substrate atoms in FTCNQ/Ag(111), whereas in FTCNQ/BiAg/Ag(111) the distance is larger and the contact more localized on top of Bi. This does not significantly alter molecular levels, but it causes the respective absence or presence of optical excitations in FTCNQ core-level spectra., We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT2013-46593-C6-4-P, MAT2016-78293-C6-6-R, and FIS2016-75862-P) and Basque Government (Grants IT-621-13 and IT-756-13). P.B. acknowledges financial support from the EU-Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie grant agreement No 658056., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the graphene on Ir(111) adsorption regime by Fe/Ir surface-alloying

  • Brede, Jens
  • Slawinska, Jagoda
  • Abadia, Mikel
  • Rogero, Celia
  • Ortega, J. Enrique
  • Piquero-Zulaica, Ignacio
  • Lobo-Checa, Jorge
  • Arnau, Andrés
  • Cerdá, Jorge I.
A combined scanning tunneling microscopy, x-ray photoelectron spectroscopy, angle-resolved photoemission spectroscopy, and density functional theory study of graphene on a Fe-Ir(111) alloy with variable Ir concentration is presented. Starting from an intercalated Fe layer between the graphene and Ir(111) surface we find that graphene-substrate interaction can be fine-tuned by Fe-Ir alloying at the interface. When a critical Ir-concentration close to 0.25 is reached in the Fe layer, the Dirac cone of graphene is largely restored and can thereafter be tuned across the Fermi level by further increasing the Ir content. Indeed, our study reveals an abrupt transition between a chemisorbed phase at small Ir concentrations and a physisorbed phase above the critical concentration. The latter phase is highly reminiscent of the graphene on the clean Ir(111) surface. Furthermore, the transition is accompanied by an inversion of the graphene's induced magnetization due to the coupling with the Fe atoms from antiferromagnetic when chemisorbed to weakly ferromagnetic in the physisorption regime, with spin polarizations whose magnitude may be tuned with the amount of Fe content., This work has been funded by the Spanish MINECO under contract Nos. FIS2013-48286-C2-1-P, MAT2013-47878-C2-R, MAT2015-66888-C3-1R, and MAT2013-46593-C6-4-P as well as the Basque Government Grants IT621-13 and IT756-13., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Very high temperature tiling of tetraphenylporphyrin on rutile TiO2(110)

  • Lovat, Giacomo
  • Forrer, Daniel
  • Abadia, Mikel
  • Domínguez, Marcos
  • Casarin, Maurizio
  • Rogero, Celia
  • Vittadini, Andrea
  • Floreano, Luca
We demonstrate the thermal stability up to 450 °C of a titanium(iv)-porphyrin monolayer grown on the rutile TiO(110) surface. Starting from a film of metal-free tetra-phenyl-porphyrin, 2HTPP, deposited at room temperature, we show that, beyond the self-metalation reaction at 150°-200 °C, a second phase transition takes place at ∼350 °C. Using surface diffraction and microscopy, we observe a change of the phase symmetry from (2 × 4)-obliq to (2 × 6)-rect. Core level photoemission indicates that the chemical states of both the molecular tetrapyrrolic macrocycle and the substrate are unchanged. X-ray absorption spectroscopy reveals that the driving mechanism is a rotation of the phenyl terminations towards the substrate (flattening) that triggers a conformational change of the molecule through partial cyclo-dehydrogenation. From comparison with first principles calculations, we show that the common feature of these multiple phase transitions is the chemical nature of the porphyrin bonding atop the substrate oxygen rows: the coordination of the macrocycle central pocket to the oxygen atoms beneath is preserved throughout both the self-metalation and flattening reactions. The molecular orientation and arrangement are determined by steric constraints and intermolecular interactions, whereas the specific adsorption site is further stabilized by the interaction of the peripheral C-H network with the adjacent oxygen rows. Porphyrins are thus trapped at the TiO(110) surface, where they demonstrate an exceptionally high thermal stability (up to ∼450 °C), which makes this interface potentially useful for sensors and photocatalysis applications in harsh environments., We acknowledge the support from the MIUR of Italy through PRIN project DESCARTES (no. 2010BNZ3F2), from the Spanish Government (Grant MAT2013-46593-C6-4-P) and from the Basque Department of Education (Grant IT-621-13). M. A. also acknowledges the financial support of DIPC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Spatial variation of the active phases during the catalytic oxidation of CO measured on a curved Pd(111) surface

  • Ortega, J. Enrique
  • Ilyn, Max
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Huck-Iriart, Cristián
  • Ruiz del Árbol, Nerea
  • Hagman, Benjamin
  • Blomberg, Sara
  • Gustafson, Johan
  • Lundgren, Edvin
  • Schiller, Frederik
Resumen del póster presentado al 5th Annual Ambient Pressure X-ray Photoelectron Spectroscopy Workshop, celebrado en Berlin (Alemania) del 11 al 14 de diciembre de 2018., For decades, the study of chemical reactions on single metal surfaces has been aimed at identifying those active sites and crystal planes that feature nanoparticles. However, nanocrystal facets coexist in a reduced space, and are expected to simultaneously undergo chemical and structural transformations during catalytic reactions. In ALBA we explore chemical-structural interplays among crystal planes using curved crystals and near-ambient X-ray photoemission (XPS) at CIRCE. As a test case for the approach, we recently used a curved Pd(111) surface, on which we freeze the CO oxidation reaction at the ignition temperature. By scanning the photon beam across the curved surface, we observe a smooth spatial variation of chemisorbed phases, demonstrating a different reaction stage at each crystallographic plane. As shown in the Figure, the XPS signal from chemisorbed CO reveals the linearly decreasing fraction of CO-poisoned areas, from the (111) direction up to a 10º critical angle, and at various temperatures around light-off. This behavior is explained as a collective structural response of the surface at the reaction onset, consisting in the weighted segregation of less-active (111) phase and highly-active (223) and (332) facets in A-type and B-type vicinal planes, respectively., We acknowledge financial support from the Spanish Ministry of Economy (Grant MAT2013-46593-C6-4-P) and Basque Govemment (Grant IT621-13)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Spatial variation of the active phases during the catalytic oxidation of CO on a curved Pd(111) surface

  • Schiller, Frederik
  • Ilyn, Max
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Huck-Iriart, Cristián
  • Ruiz del Árbol, Nerea
  • Hagman, Benjamin
  • Blomberg, Sara
  • Gustafson, Johan
  • Lundgren, Edvin
  • Ortega, J. Enrique
Resumen del trabajo presentado a la conferencia Tailored surfaces in operando conditions (Tailor): A Marcus Wallenberg symposium, celebrada en Ystad (suecia) del 11 al 14 de junio de 2018., For decades, the study of chemical reactions on single metal surfaces has been aimed at identifying those active sites and crystal planes that feature nanoparticles. However, nanocrystal facets coexist in a reduced space, and are expected to simultaneously undergo chemical and structural transformations during catalytic reactions. We explore chemical-structural interplays among crystal planes using curved crystals and near-ambient X-ray photoemission (XPS) at CIRCE beamline, ALBA (Spain) synchrotron. As a test case for the approach, we use a curved Pd(111) surface, on which we freeze the CO oxidation reaction at the ignition temperature. By scanning the photon beam across the curved surface, we observe a smooth spatial variation of chemisorbed phases, demonstrating a different reaction stage at each crystallographic plane. As shown in the Figure, the XPS signal from chemisorbed CO reveals the linearly decreasing fraction of CO-poisoned areas, from the (111) direction up to a 10º critical angle, and at various temperatures around light-off. This behavior is explained as a collective structural response of the surface at the reaction onset, consisting in the weighted segregation of less-active (111) phase and highly-active facets in A-type [beyond (557)] and B-type [beyond (443)] vicinal planes, respectively., We acknowledge financial support from the Spanish Ministry of Economy (Grant MAT2013-46593-C6-4-P) and Basque Government (Grant IT621-13)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomically resolved magnetic structure of a Gd-Au surface alloy

  • Bazarnik, Maciej
  • Abadia, Mikel
  • Brede, Jens
  • Hermanowicz, M.
  • Sierda, Emil
  • Elsebach, Micha
  • Hänke, Torben
  • Wiesendanger, Roland
The magnetic structure of a monolayer-thick GdAu2 surface alloy on Au(111) has been investigated down to the atomic level by spin-polarized scanning tunneling microscopy. Spin-resolved tunneling spectroscopy combined with density-functional theory calculations reveal the local spin polarization of both Gd and Au atomic sites within the surface alloy. Moreover, the impact of dislocation lines on the atomic-scale magnetic structure as well as on the local coercive field strength is demonstrated., We gratefully acknowledge financial support from the Office of Naval Research via Grant No. N00014-16-1-2900. Moreover, M.A. and J.B. acknowledge funding from the Spanish MINECO under Contracts No. MAT2013-46593-C6- 4-P and No. MAT2016-78293-C6-5-R as well as the Basque Government Grants No. IT621-13 and No. IT-756-13. T.H. acknowledges support by the DFG under Grant No. HA 6037/2-1. E.S. acknowledges financing from Polish budget funds for science in 2014–2017 as a research project in the program “Diamond Grant” No. 0084/DIA/2014/43. M.H. acknowledges the support from the Ministry of Science and Higher Education in Poland within Project realized at Faculty of Technical Physics, Poznan University of Technology, and Poznan Supercomputing and Networking Center (PSNC)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin Hall magnetoresistance in a low-dimensional Heisenberg ferromagnet

  • Vélez, Saül
  • Golovach, Vitaly N.
  • Gomez-Perez, Juan M.
  • Chuvilin, Andrey
  • Bui, Cong Tinh
  • Rivadulla, Luis E.
  • Hueso, Luis E.
  • Bergeret, F. Sebastian
  • Casanova, Félix
We report the spin Hall magnetoresistance (SMR) in Pt deposited on a tensile-strained LaCoO3 (LCO) thin film, which is a ferromagnetic insulator with a Curie temperature Tc=85K. The SMR displays a strong magnetic-field dependence below Tc, with the SMR amplitude continuing to increase (linearly) with increasing the field far beyond the saturation value of the ferromagnet. The SMR amplitude decreases gradually with raising the temperature across Tc and remains measurable even above Tc. Moreover, no hysteresis is observed in the field dependence of the SMR. These unusual behaviors indicate that a low-dimensional magnetic system forms at the surface of LCO and that the LCO/Pt interface decouples magnetically from the rest of the LCO thin film. Transmission electron microscopy analysis of the heterostructure reveals that an ultrathin Co-rich layer forms at the LCO surface upon deposition of Pt, which is separated from the rest of the LCO film by a ∼1-nm La/O-rich layer, thus supporting the presence of a low-dimensional ferromagnetic system. To explain the magnetoresistance measurements, we revisit the derivation of the SMR corrections and relate the spin-mixing conductances to the spin-spin correlation functions and microscopic quantities describing the magnetism at the interface. Comparisons between theory and experiment confirm the existence of a low-dimensional Heisenberg ferromagnet at the interface. Our results pave the way for exploring complex magnetic textures of insulating films by simple transport measurements., This work was supported by the European Union 7th Framework Programme under the Marie Curie Actions (607904- 13-SPINOGRAPH), the European Research Council (257654-SPINTROS), and the European Regional Development Fund (ERDF), by the Spanish Ministry of Economy, Industry and Competitiveness (MAT2015-65159-R, FIS2014-55987-P, MAT2013-46593-C6-4-P, MAT2016-80762-R and FIS2017-82804-P), by the Basque Government (UPV/EHU Project IT-756-13 and IT-621-13), by the Regional Council of Gipuzkoa (100/16), and by the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016–2019, ED431G/09).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Decacyclene trianhydride at functional interfaces: An ideal electron acceptor material for organic electronics

  • Oteyza, Dimas G. de
  • García-Lastra, J. M.
  • Toma, Francesca M.
  • Borghetti, Patrizia
  • Floreano, Luca
  • Verdini, Alberto
  • Cossaro, Albano
  • Pho, Toan V.
  • Wudl, Fred
  • Ortega, J. Enrique
We report the interface energetics of decacyclene trianhydride (DTA) monolayers on top of two distinct model surfaces, namely, Au(111) and Ag(111). On the latter, combined valence band photoemission and X-ray absorption measurements that access the occupied and unoccupied molecular orbitals, respectively, reveal that electron transfer from substrate to surface sets in. Density functional theory calculations confirm our experimental findings and provide an understanding not only of the photoemission and X-ray absorption spectral features of this promising organic semiconductor but also of the fingerprints associated with the interface charge transfer., This work was supported by the Spanish Grants No. MAT2013-46593-C6-4-P, and the Basque Government Grant No. IT-621-13. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 312284. J.M.G.L. acknowledges support from the Spanish Ministry of Economy and Competitiveness under Projects FIS2012-30996 and FIS2013-46159-C3-1-P and from the Villum Foundation’s Young Investigator Programme (fourth round, project: In silico design of efficient materials for next generation batteries. Grant number: 10096) F.M.T. acknowledges financial support from the Area Science Park of Trieste and EU (TALENTS Fellowship Programme, PCOFUND-GA-2009-245574). F.M.T. and F.W. thank the Center for Energy Efficient Materials, an Energy Frontier Research Center funded by the U.S. Department of Energy under award number DE-SC0001009 for the DTA synthesis and characterizations. T.V.P. and F.W. acknowledge the ConvEne IGERT Program (NSF-DGE0801627) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth of Co nanomagnet arrays with enhanced magnetic anisotropy

  • Fernández, Laura
  • Ilyn, Max
  • Magaña, Ana
  • Vitali, Lucia
  • Ortega, J. Enrique
  • Schiller, Frederik
A trigon structure formed by submonolayer gadolinium deposition onto Au(111) is revealed as a robust growth template for Co nanodot arrays. Scanning Tunneling Microscopy and X-Ray Magnetic Circular Dichroism measurements evidence that the Co nanoislands behave as independent magnetic entities with an out-of-plane easy axis of anisotropy and enhanced magnetic anisotropy values, as compared to other self-organized Co nanodot superlattices. The large strain induced by the lattice mismatch at the interface between Co and trigons is discussed as the main reason for the increased magnetic anisotropy of the nanoislands., The authors acknowledge financial support from the Gipuzkoako Foru Aldundia (L.F.), the Spanish Ministry of Economy (Grant MAT2013-46593-C6-4-P), the Basque Government (IT-621-13, IT-627-13), SAIOTEK (S-PE12UN095), and by the Deutsche Forschungsgemeinschaft through SFB 1083 “Structure and Dynamics of Internal Interfaces” (L.F., F.S.). The authors additionally acknowledge DEIMOS beamline staff, specially P. Ohresser, and SOLEIL for provision of synchrotron radiation and the EU Calipso program for synchrotron access funding. The MBE chamber on DEIMOS was funded by the Agence National de la Recherche; grant ANR-05-NANO-073., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-component organic layers on metal substrates

  • Goiri, Elizabeth
  • Borghetti, Patrizia
  • El-Sayed, Afaf
  • Ortega, J. Enrique
  • Oteyza, Dimas G. de
Increasingly high hopes are being placed on organic semiconductors for a variety of applications. Progress along these lines, however, requires the design and growth of increasingly complex systems with well-defined structural and electronic properties. These issues have been studied and reviewed extensively in single-component layers, but the focus is gradually shifting towards more complex and functional multi-component assemblies such as donor–acceptor networks. These blends show different properties from those of the corresponding single-component layers, and the understanding on how these properties depend on the different supramolecular environment of multi-component assemblies is crucial for the advancement of organic devices. Here, our understanding of two-dimensional multi-component layers on solid substrates is reviewed. Regarding the structure, the driving forces behind the self-assembly of these systems are described. Regarding the electronic properties, recent insights into how these are affected as the molecule's supramolecular environment changes are explained. Key information for the design and controlled growth of complex, functional multicomponent structures by self-assembly is summarized., This work was supported by Spanish Grant No. MAT2013-46593-C6-4-P, and Basque Government Grant No. IT-621-13., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanophotoactivity of porphyrin functionalized polycrystalline ZnO films

  • Rogero, Celia
  • Pickup, David F.
  • Colchero, Jaime
  • Azaceta, Eneko
  • Tena-Zaera, Ramón
  • Palacios-Lidón, Elisa
Kelvin probe force microscopy in darkness and under illumination is reported to provide nanoscale-resolved surface photovoltage maps of hybrid materials. In particular, nanoscale charge injection and charge recombination mechanisms occurring in ZnO polycrystalline surfaces functionalized with Protoporphyrin IX (H2PPIX) are analyzed. Local surface potential and surface photovoltage maps not only reveal that upon molecular adsorption the bare ZnO work function increases, but also they allow study of its local dependence. Nanometer-sized regions not correlated with apparent topographic features were identified, presenting values significantly different from the average work function. Depending on the region, the response to the light excitation is different, distinguishing two relaxation processes, one faster than the other. This behavior can be explained in terms of electrons trapped closed to the molecule–semiconductor interface or electrons pushed into the ZnO bulk, respectively. Moreover, the origin of these differences is correlated with the H2PPIX–ZnO bonding and molecules configuration and aggregation. The chenodeoxycholic acid (CDCA) coadsorption leads to a more homogeneous surface potential distribution, confirming the antiaggregate effect of this additive, while the surface photovoltage is mostly dominated by the slow relaxation component. This work reveals the complexity of real device architectures with ill-defined surfaces even in a relatively simple system with only one type of dye molecule and hightlights the importance of nanoscale characterization with appropriate tools., This work has been partially funded by the Ministerio de Economia y Competitividad and (MINECO, Spain (Grants MAT2013-47192-C3-2-R, MAT2013-46593-C6-4-P), FEDER (EU) through the projects ENE2013-48816-C5-1-R -C02-01, Force for Future CSD2010-00024, Fundacion Seneca 15324/PI/10, and Basque Department of Education (Grant IT-621-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Substrate-independent growth of atomically precise chiral graphene nanoribbons

  • Oteyza, Dimas G. de
  • Garcia-Lekue, Aran
  • Vilas-Varela, Manuel
  • Merino-Díez, Nestor
  • Carbonell, Eduard
  • Corso, Martina
  • Vasseur, Guillaume
  • Rogero, Celia
  • Guitián, Enrique
  • Pascual, José I.
  • Ortega, J. Enrique
  • Wakayama, Yutaka
  • Peña, Diego
Contributing to the need for new graphene nanoribbon (GNR) structures that can be synthesized with atomic precision, we have designed a reactant that renders chiral (3,1)-GNRs after a multistep reaction including Ullmann coupling and cyclodehydrogenation. The nanoribbon synthesis has been successfully proven on different coinage metals, and the formation process, together with the fingerprints associated with each reaction step, has been studied by combining scanning tunneling microscopy, core-level spectroscopy, and density functional calculations. In addition to the GNR’s chiral edge structure, the substantial GNR lengths achieved and the low processing temperature required to complete the reaction grant this reactant extremely interesting properties for potential applications., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 635919), from ICT-FET EU integrated project PAMS (Agreement No. 610446), from the Spanish Ministry of Science and Competitiveness (MINECO, Grant Nos. MAT2013-46593-C6-01, MAT2013-46593-C6-2-P, MAT2013-46593-C6-4-P, MAT2013-46593-C6-6-P), FEDER, from the Basque Government (Grant Nos. IT-621-13, IT-756-13, and PI2015-042), from the World Premier International Center (WPI) for Materials Nanoarchitectonics (MANA) of the National Institute for Materials Science (NIMS), Tsukuba, Japan, and from JSPS Bilateral Open Partnership Joint Research Project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Interplay between steps and oxygen vacancies on curved TiO2(110)

  • Miccio, Luis A.
  • Setvin, Martin
  • Müller, Moritz
  • Abadia, Mikel
  • Piquero-Zulaica, Ignacio
  • Lobo-Checa, Jorge
  • Schiller, Frederik
  • Rogero, Celia
  • Schmid, Michael
  • Sánchez-Portal, Daniel
  • Diebold, Ulrike
  • Ortega, J. Enrique
Trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 21 al 27 de febrero de 2016., We acknowledge financial support from the Spanish Ministry of Economy (grant MAT2013-46593-C6-4-P and MAT2013-46593-C6-2-P) and the Basque Government (grant IT621-13 and IT756-13), the ERC Advanced Grant “OxideSurfaces”., and the Marie Curie ITN “THINFACE”., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Electron refraction at lateral atomic interfaces

  • Abd El-Fattah, Z. M.
  • Kher-Elden, M A.
  • Yassin, O.
  • El-Okr, M. M.
  • Ortega, J. E.
  • García de Abajo, Francisco Javier
We present theoretical simulations of electron refraction at the lateral atomic interface between a “homogeneous” Cu(111) surface and the “nanostructured” one-monolayer (ML) Ag/Cu(111) dislocation lattice. Calculations are performed for electron binding energies barely below the 1 ML Ag/ Cu(111) M-point gap (binding energy EB ¼53 meV, below the Fermi level) and slightly above its C -point energy (EB ¼160 meV), both characterized by isotropic/circular constant energy surfaces. Using plane-wave-expansion and boundary-element methods, we show that electron refraction occurs at the interface, the Snell law is obeyed, and a total internal reflection occurs beyond the critical angle. Additionally, a weak negative refraction is observed for EB ¼53 meV electron energy at beam incidence higher than the critical angle. Such an interesting observation stems from the interface phase-matching and momentum conservation with the umklapp bands at the second Brillouin zone of the dislocation lattice. The present analysis is not restricted to our Cu-Ag/Cu model system but can be readily extended to technologically relevant interfaces with spinpolarized, highly featured, and anisotropic constant energy contours, such as those characteristic for Rashba systems and topological insulators. Published by AIP Publishing., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tunable Band Alignment with Unperturbed Carrier Mobility of On-Surface Synthesized Organic Semiconducting Wires

  • Basagni, A.
  • Vasseur, G.
  • Pignedoli, C.A.
  • Vilas-Varela, M.
  • Penã, D.
  • Nicolas, L.
  • Vitali, L.
  • Lobo-Checa, J.
  • De Oteyza, D.G.
  • Sedona, F.
  • Casarin, M.
  • Ortega, J.E.
  • Sambi, M.
The tunable properties of molecular materials place them among the favorites for a variety of future generation devices. In addition, to maintain the current trend of miniaturization of those devices, a departure from the present top-down production methods may soon be required and self-assembly appears among the most promising alternatives. On-surface synthesis unites the promises of molecular materials and of self-assembly, with the sturdiness of covalently bonded structures: An ideal scenario for future applications. Following this idea, we report the synthesis of functional extended nanowires by self-assembly. In particular, the products correspond to one-dimensional organic semiconductors. The uniaxial alignment provided by our substrate templates allows us to access with exquisite detail their electronic properties, including the full valence band dispersion, by combining local probes with spatial averaging techniques. We show how, by selectively doping the molecular precursors, the product''s energy level alignment can be tuned without compromising the charge carrier''s mobility.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Formation of the BiAg2 surface alloy on lattice-mismatched interfaces

  • Abd El-Fattah, Z.M.
  • Lutz, P.
  • Piquero-Zulaica, I.
  • Lobo-Checa, J.
  • Schiller, F.
  • Bentmann, H.
  • Ortega, J.E.
  • Reinert, F.
We report on the growth of a monolayer-thick BiAg2 surface alloy on thin Ag films grown on Pt(111) and Cu(111). Using low energy electron diffraction (LEED), angle resolved photoemission spectroscopy (ARPES), and scanning tunneling microscopy (STM) we show that the surface structure of the 13 ML Bi/x-ML Ag/Pt(111) system (x=2) is strongly affected by the annealing temperature required to form the alloy. As judged from the characteristic (3×3)R30 LEED pattern, the BiAg2 alloy is partially formed at room temperature. A gentle, gradual increase in the annealing temperatures successively results in the formation of a pure BiAg2 phase, a combination of that phase with a (2×2) superstructure, and finally the pure (2×2) phase, which persists at higher annealing temperatures. These results complement recent work reporting the (2×2) as a predominant phase, and attributing the absence of BiAg2 alloy to the strained Ag/Pt interface. Likewise, we show that the growth of the BiAg2 alloy on similarly lattice-mismatched 1 and 2 ML Ag-Cu(111) interfaces also requires a low annealing temperature, whilst higher temperatures result in BiAg2 clustering and the formation of a BiCu2 alloy. The demonstration that the BiAg2 alloy can be formed on thin Ag films on different substrates presenting a strained interface has the prospect of serving as bases for technologically relevant systems, such as Rashba alloys interfaced with magnetic and semiconductor substrates.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning the Graphene on Ir(111) adsorption regime by Fe/Ir surface-alloying

  • Brede, J.
  • Slawinska, J.
  • Abadia, M.
  • Rogero, C.
  • Ortega, J.E.
  • Piquero-Zulaica, I.
  • Lobo-Checa, J.
  • Arnau, A.
  • Cerdá, J.I.
A combined scanning tunneling microscopy, x-ray photoelectron spectroscopy, angle-resolved photoemission spectroscopy, and density functional theory study of graphene on a Fe-Ir(111) alloy with variable Ir concentration is presented. Starting from an intercalated Fe layer between the graphene and Ir(111) surface we find that graphene-substrate interaction can be fine-tuned by Fe-Ir alloying at the interface. When a critical Ir-concentration close to 0.25 is reached in the Fe layer, the Dirac cone of graphene is largely restored and can thereafter be tuned across the Fermi level by further increasing the Ir content. Indeed, our study reveals an abrupt transition between a chemisorbed phase at small Ir concentrations and a physisorbed phase above the critical concentration. The latter phase is highly reminiscent of the graphene on the clean Ir(111) surface. Furthermore, the transition is accompanied by an inversion of the graphene''s induced magnetization due to the coupling with the Fe atoms from antiferromagnetic when chemisorbed to weakly ferromagnetic in the physisorption regime, with spin polarizations whose magnitude may be tuned with the amount of Fe content.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

p Band Dispersion Along Conjugated Organic Nanowires Synthesized on a Metal Oxide Semiconductor

  • Vasseur, G.
  • Abadia, M.
  • Miccio, L.A.
  • Brede, J.
  • Garcia-Lekue, A.
  • De Oteyza, D.G.
  • Rogero, C.
  • Lobo-Checa, J.
  • Ortega, J.E.
Surface-confined dehalogenation reactions are versatile bottom-up approaches for the synthesis of carbonbased nanostructures with predefined chemical properties. However, for devices generally requiring low-conductivity substrates, potential applications are so far severely hampered by the necessity of a metallic surface to catalyze the reactions. In this work we report the synthesis of ordered arrays of poly(p-phenylene) chains on the surface of semiconducting TiO2(110) via a dehalogenative homocoupling of 4, 4¿- dibromoterphenyl precursors. The supramolecular phase is clearly distinguished from the polymeric one using low-energy electron diffraction and scanning tunneling microscopy as the substrate temperature used for deposition is varied. X-ray photoelectron spectroscopy of C 1s and Br 3d core levels traces the temperature of the onset of dehalogenation to around 475 K. Moreover, angle-resolved photoemission spectroscopy and tightbinding calculations identify a highly dispersive band characteristic of a substantial overlap between the precursor''s p states along the polymer, considered as the fingerprint of a successful polymerization. Thus, these results establish the first spectroscopic evidence that atomically precise carbon-based nanostructures can readily be synthesized on top of a transition-metal oxide surface, opening the prospect for the bottom-up production of novel molecule-semiconductor devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Precise engineering of quantum dot array coupling through their barrier widths

  • Piquero-Zulaica, I.
  • Lobo-Checa, J.
  • Sadeghi, A.
  • El-Fattah, Z.M.A.
  • Mitsui, C.
  • Okamoto, T.
  • Pawlak, R.
  • Meier, T.
  • Arnau, A.
  • Ortega, J.E.
  • Takeya, J.
  • Goedecker, S.
  • Meyer, E.
  • Kawai, S.
Quantum dots are known to confine electrons within their structure. Whenever they periodically aggregate into arrays and cooperative interactions arise, novel quantum properties suitable for technological applications show up. Control over the potential barriers existing between neighboring quantum dots is therefore essential to alter their mutual crosstalk. Here we show that precise engineering of the barrier width can be experimentally achieved on surfaces by a single atom substitution in a haloaromatic compound, which in turn tunes the confinement properties through the degree of quantum dot intercoupling. We achieved this by generating self-assembled molecular nanoporous networks that confine the two-dimensional electron gas present at the surface. Indeed, these extended arrays form up on bulk surface and thin silver films alike, maintaining their overall interdot coupling. These findings pave the way to reach full control over two-dimensional electron gases by means of self-assembled molecular networks.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electron refraction at lateral atomic interfaces

  • Abd El-Fattah, Z. M.
  • Kher-Elden, M A.
  • Yassin, O.
  • El-Okr, M. M.
  • Ortega, J. E.
  • García de Abajo, Francisco Javier
We present theoretical simulations of electron refraction at the lateral atomic interface between a “homogeneous” Cu(111) surface and the “nanostructured” one-monolayer (ML) Ag/Cu(111) dislocation lattice. Calculations are performed for electron binding energies barely below the 1 ML Ag/ Cu(111) M-point gap (binding energy EB ¼53 meV, below the Fermi level) and slightly above its C -point energy (EB ¼160 meV), both characterized by isotropic/circular constant energy surfaces. Using plane-wave-expansion and boundary-element methods, we show that electron refraction occurs at the interface, the Snell law is obeyed, and a total internal reflection occurs beyond the critical angle. Additionally, a weak negative refraction is observed for EB ¼53 meV electron energy at beam incidence higher than the critical angle. Such an interesting observation stems from the interface phase-matching and momentum conservation with the umklapp bands at the second Brillouin zone of the dislocation lattice. The present analysis is not restricted to our Cu-Ag/Cu model system but can be readily extended to technologically relevant interfaces with spinpolarized, highly featured, and anisotropic constant energy contours, such as those characteristic for Rashba systems and topological insulators. Published by AIP Publishing., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metallic thin films on stepped surfaces, Lateral scattering of quantum well states

  • Schiller, Frederik|||0000-0003-1727-3542
  • El-Fattah, Z. M. Abd
  • Schirone, Stephano
  • Lobo Checa, J.
  • Urdanpilleta, M.
  • Ruiz Osés, M.
  • Cordón, J.
  • Corso, Martina|||0000-0002-8592-1284
  • Sanchez-Portal, Daniel|||0000-0001-6860-8790
  • Mugarza, Aitor|||0000-0002-2698-885X
  • Ortega, J. E.
Quantum well states of Ag films grown on stepped Au(111) surfaces are shown to undergo lateral scattering, in analogy with surface states of vicinal Ag(111). Applying angle resolved photoemission spectroscopy we observe quantum well bands with zone-folding and gap openings driven by surface/interface step lattice scattering. Experiments performed on a curved Au(111) substrate allow us to determine a subtle terrace-size effect, i.e., a fine step-density-dependent upward shift of quantum well bands. This energy shift is explained as mainly due to the periodically stepped crystal potential offset at the interface side of the film. Finally, the surface state of the stepped Ag film is analyzed with both photoemission and scanning tunneling microscopy. We observe that the stepped film interface also affects the surface state energy, which exhibits a larger terrace-size effect compared to surface states of bulk vicinal Ag(111) crystals.