Pasar al contenido principal

CARACTERIZACION OPTICA DE LIQUIDOS Y GELES IONICOS PARA SU APLICACION EN DISPOSITIVOS FOTONICOS Y ELECTROQUIMICOS

MAT2014-57943-C3-2-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Imidazolium Decyl Sulfate: A Very Promising Selfmade Ionic Hydrogel

  • Cabeza, Óscar
  • Rilo, Esther
  • Segade, Luisa
  • Domínguez-Pérez, Montserrat
  • García-Garabal, Sandra
  • Ausín, David
  • López Lago, Elena
  • Varela, Luis M.
  • Vilas, Miguel
  • Verdía, Pedro
  • Tojo, Emilia
This is the Accepted Manuscript version of the article. It has been through the peer review process at the Royal Society of Chemistry and has been accepted for publication in the journal "Materials Chemistry Frontiers"., [Abstract] In this paper, we show, for the first time, the synthesis, structural characterization, phase diagram and physical properties of the ionic liquid, 1-ethyl-3-methyl imidazolium decyl sulfate [EMIm][DSO4]. At 25 °C it is either a crystalline solid or a liquid depending on the thermal history as its melting point is about 33 °C and its point of solidification is about 22 °C. The interest of this new IL lies in its ability to become a rigid hydrogel when mixed with water. As observed in many ILs, the as-prepared IL is hygroscopic and it adsorbs about 14 wt% of water at usual laboratory conditions and up to 27 wt% in a 100% saturated atmosphere. Due to the H-bonds between water and the amphiphilic [DSO4] anions, a lyotropic HIliquid crystalline phase is formed in the hydrated state, which can be observed in micrographs recorded using white polarized light. The moisture adsorption is a completely reversible process; thus, the rigid-gel sample loses all adsorbed water when it is left in a dry atmosphere for a few hours, transitioning to the liquid state. Phase diagrams of the temperature-water concentration is presented and compared with that of the parent compound [EMIm] octyl sulfate, [OSO4]. X-ray diffraction revels that below 15 °C the hydrated compound crystallizes into aP2/mmonoclinic structure. The structure of the new compound was confirmed by NMR, FTIR and mass spectroscopy (MS). In addition, the temperature behavior of ionic conductivity was experimentally measured and analyzed for the pure compound and for two samples hydrated with 10 wt% and 39 wt% of water. Viscosity and density were also measuredvs.temperature for the pure sample. The as-prepared IL shows great potential for numerous practical applications., This work was financed by MINECO from the Spanish Government (Grants No. MAT2014-57943-C3-1-P, MAT2014-57943-C3-2-P, MAT2014-57943-C3-3-P and DPI2012-38841-C02-02), by the European Union (COST Action CM 1206) and by the Galician Network on Ionic Liquids, REGALIs (CN 2014/015). Research projects have been co-financed by the European Regional Development Fund (FEDER)
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Mesostructure and Physical Properties of Aqueous Mixtures of the Ionic Liquid 1-Ethyl-3-Methyl Imidazolium Octyl Sulfate Doped With Divalent Sulfate Salts in the Liquid and the Mesomorphic States

  • Cabeza, Óscar
  • Segade, Luisa
  • Domínguez-Pérez, Montserrat
  • Rilo, Esther
  • Ausín, David
  • Martinelli, Anna
  • Yaghini, Negin
  • Gollas, Bernhard
  • Kriechbaum, Manfred
  • Russina, Olga
  • Triolo, Alessandro
  • López Lago, Elena
  • Varela, Luis M.
This is the accepted manuscript of the article., [Abstract] This paper extends the study of the induced temperature change in the mesostructure and in the physical properties occurring in aqueous mixtures of the ionic liquid 1-ethyl-3-methyl imidazolium octyl-sulfate [EMIm][OSO4]. For some compositions, these mixtures undergo a phase transition between the liquid (isotropic in the mesoscale) and the mesomorphic state (lyotropic liquid crystalline) at about room temperature. The behavior of mixtures doped with a divalent metal sulfate was investigated in order to observe their applicability as electrolytes. Calcium sulfate salt is almost insoluble even in the 20 wt% water mixture. The magnesium salt, in contrast, can be dissolved up to concentrations of 730 ppm in the same mixture and it has a profound impact on its properties. Six aqueous mixtures (with water content from 10 wt% to 33 wt%) of [EMIm][OSO4] were saturated with magnesium sulfate salt, producing the ternary mixture [EMIm][OSO4] + H2O + MgSO4. Viscosity, density and ionic conductivity for these samples were measured from 10 °C to 90 °C. In addition, SAXS, FTIR, diffussion NMR and Raman spectroscopy of the most interesting samples have been performed, and structural data indicate a transition between a hexagonal lyotropic liquid crystalline phase below and an isotropic solution phase above room temperature. The octyl sulfate anions of the cylindrical micelles in the hexagonal phase are coordinated with water molecules through H-bonds (about four per sulfate anion), while the [EMIm] cations seem to be poorly coordinated and so free to move. Inorganic salt addition reinforces that network, increasing the phase transition temperature., The authors are grateful to the technician M. Cabanas for some of the great quality measurements and also to UEM, UEPM and UM of SAI from UDC. This work was supported by MINECO from the Spanish Government (Grants No. MAT2014-57943-C3-1-P, MAT2014-57943-C3-2-P and MAT2014-57943-C3-3-P), COST program Action CM 1206 EXIL, and by the Xunta de Galicia through the research projects Network on Ionic Liquids, REGALIs (CN 2014/015), AGRU 2015/11 and GDR ED413C 2016/001. Research projects have been co-financed by the European Regional Development Fund (FEDER). A. M. and N. Y. acknowledge the financial support from the ÅForsk Foundation in Sweden (grant no. 16-644, 2016). We also acknowledge the European Synchrotron Radiation Facility for provision of synchrotron radiation facilities and would like to thank Dr E. Di Cola and T. Narayanan for their kind and competent assistance in exploiting beamline ID02, Xunta de Galicia; AGRU 2015/11, Xunta de Galicia; ED413C 2016/001, ÅForsk Foundation in Sweden; 16-644, 2016
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Synthesis, Microstructure and Volumetry of Novel Metal Thiocyanate Ionic Liquids With [BMIM] Cation

  • Cabeza, Óscar
  • Varela, Luis M.
  • Rilo, Esther
  • Segade, Luisa
  • Domínguez-Pérez, Montserrat
  • Ausín, David
  • Pedro, Manuel de
  • Rodríguez Fernández, Jesús
  • González, Jesús Antonio
  • Vázquez-Tato, M. Pilar
  • Arosa, Yago
  • López Lago, Elena
  • Fuente, Raúl de la
  • Parajó, Juan José
  • Salgado, Josefa
  • Villanueva López, María
  • Matveev, Vladimir V.
  • Ievlev, A.V.
  • Seijas, Julio A.
This is an accepted version of the published document., [Abstract] We present a new family of ionic liquids (ILs) with a common cation, 1-butyl-3-methyl imidazolium, the popular [BMIM]+ (also written C4C1Im+) and a variety of anionic complexes (also called adducts) based in thiocyanate (SCN)−: one blank compound, BMIM(SCN), and ten doped with metals having different oxidation states: Al+3, Mn+2, Fe+3, Cr+3, Ni+2, Hg+2, Zn+2, Co+2, Cd+2 and Cu+, forming, respectively, [BMIM]3[Al(SCN)6], [BMIM]4 Mn(SCN)6, [BMIM]3 Fe(SCN)6, [BMIM]3 Cr(SCN)6, [BMIM]4 Ni(SCN)6, [BMIM]2 Hg(SCN)4, [BMIM]2 Zn(SCN)4, [BMIM]2 Co(SCN)4, [BMIM]2 Cd(SCN)4 and [BMIM]3 Cu(SCN)4. All of them were synthesized by us, except the blank IL and the Co thiocyanate, which are commercial. Obtained products have been characterized by NMR, and also by electrospray ionization, MS-ES, which allows the determination of the new ILs purities. Then, compounds have been analyzed using FT-IR and Raman spectroscopy. In addition, magnetic susceptibility and refractive index measurements were performed in some of the compounds studied, as well as thermal characterization using DSC and TGA. Finally, experimental measurements of density on all those ILs have been performed, and for some of the samples in a broad temperature range (about 100 K). In spite of being very similar compounds from the chemical point of view, they present quite different physical properties, including optical, thermal and magnetic ones… Also, they show different oxidation states (one with +1, six with +2 and other three with +3). We guess that this family of ILs will have interesting applications, mainly for photonic devices., We acknowledge fruitful comments with our colleague Dr. A. Macías from USC. We also acknowledge the financial support of Ministerio de Economía y Competitividad (MINECO) (MAT2014-57943-C3-(1-3)-P and MAT2017-89239-C2-(1,2)-P); Xunta de Galicia (AGRU 2015/11, GRC ED431C 2016/001 and ED431D 2017/06, ED431E 2018/08). All these last research projects were partially supported by FEDER, Xunta de Galicia; AGRU 2015/11, Xunta de Galicia; ED431C 2016/001, Xunta de Galicia; ED431D 2017/06, Xunta de Galicia; ED431E 2018/08