Pasar al contenido principal

APLICACION DE LIQUIDOS IONICOS DOPADOS CON SALES COMO ELECTROLITOS AVANZADOS PARA DISPOSITIVOS ELECTROQUIMICOS Y FOTONICOS

MAT2014-57943-C3-3-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDADE DA CORUÑA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Imidazolium Decyl Sulfate: A Very Promising Selfmade Ionic Hydrogel

  • Cabeza, Óscar
  • Rilo, Esther
  • Segade, Luisa
  • Domínguez-Pérez, Montserrat
  • García-Garabal, Sandra
  • Ausín, David
  • López Lago, Elena
  • Varela, Luis M.
  • Vilas, Miguel
  • Verdía, Pedro
  • Tojo, Emilia
This is the Accepted Manuscript version of the article. It has been through the peer review process at the Royal Society of Chemistry and has been accepted for publication in the journal "Materials Chemistry Frontiers"., [Abstract] In this paper, we show, for the first time, the synthesis, structural characterization, phase diagram and physical properties of the ionic liquid, 1-ethyl-3-methyl imidazolium decyl sulfate [EMIm][DSO4]. At 25 °C it is either a crystalline solid or a liquid depending on the thermal history as its melting point is about 33 °C and its point of solidification is about 22 °C. The interest of this new IL lies in its ability to become a rigid hydrogel when mixed with water. As observed in many ILs, the as-prepared IL is hygroscopic and it adsorbs about 14 wt% of water at usual laboratory conditions and up to 27 wt% in a 100% saturated atmosphere. Due to the H-bonds between water and the amphiphilic [DSO4] anions, a lyotropic HIliquid crystalline phase is formed in the hydrated state, which can be observed in micrographs recorded using white polarized light. The moisture adsorption is a completely reversible process; thus, the rigid-gel sample loses all adsorbed water when it is left in a dry atmosphere for a few hours, transitioning to the liquid state. Phase diagrams of the temperature-water concentration is presented and compared with that of the parent compound [EMIm] octyl sulfate, [OSO4]. X-ray diffraction revels that below 15 °C the hydrated compound crystallizes into aP2/mmonoclinic structure. The structure of the new compound was confirmed by NMR, FTIR and mass spectroscopy (MS). In addition, the temperature behavior of ionic conductivity was experimentally measured and analyzed for the pure compound and for two samples hydrated with 10 wt% and 39 wt% of water. Viscosity and density were also measuredvs.temperature for the pure sample. The as-prepared IL shows great potential for numerous practical applications., This work was financed by MINECO from the Spanish Government (Grants No. MAT2014-57943-C3-1-P, MAT2014-57943-C3-2-P, MAT2014-57943-C3-3-P and DPI2012-38841-C02-02), by the European Union (COST Action CM 1206) and by the Galician Network on Ionic Liquids, REGALIs (CN 2014/015). Research projects have been co-financed by the European Regional Development Fund (FEDER)
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Mesostructure and Physical Properties of Aqueous Mixtures of the Ionic Liquid 1-Ethyl-3-Methyl Imidazolium Octyl Sulfate Doped With Divalent Sulfate Salts in the Liquid and the Mesomorphic States

  • Cabeza, Óscar
  • Segade, Luisa
  • Domínguez-Pérez, Montserrat
  • Rilo, Esther
  • Ausín, David
  • Martinelli, Anna
  • Yaghini, Negin
  • Gollas, Bernhard
  • Kriechbaum, Manfred
  • Russina, Olga
  • Triolo, Alessandro
  • López Lago, Elena
  • Varela, Luis M.
This is the accepted manuscript of the article., [Abstract] This paper extends the study of the induced temperature change in the mesostructure and in the physical properties occurring in aqueous mixtures of the ionic liquid 1-ethyl-3-methyl imidazolium octyl-sulfate [EMIm][OSO4]. For some compositions, these mixtures undergo a phase transition between the liquid (isotropic in the mesoscale) and the mesomorphic state (lyotropic liquid crystalline) at about room temperature. The behavior of mixtures doped with a divalent metal sulfate was investigated in order to observe their applicability as electrolytes. Calcium sulfate salt is almost insoluble even in the 20 wt% water mixture. The magnesium salt, in contrast, can be dissolved up to concentrations of 730 ppm in the same mixture and it has a profound impact on its properties. Six aqueous mixtures (with water content from 10 wt% to 33 wt%) of [EMIm][OSO4] were saturated with magnesium sulfate salt, producing the ternary mixture [EMIm][OSO4] + H2O + MgSO4. Viscosity, density and ionic conductivity for these samples were measured from 10 °C to 90 °C. In addition, SAXS, FTIR, diffussion NMR and Raman spectroscopy of the most interesting samples have been performed, and structural data indicate a transition between a hexagonal lyotropic liquid crystalline phase below and an isotropic solution phase above room temperature. The octyl sulfate anions of the cylindrical micelles in the hexagonal phase are coordinated with water molecules through H-bonds (about four per sulfate anion), while the [EMIm] cations seem to be poorly coordinated and so free to move. Inorganic salt addition reinforces that network, increasing the phase transition temperature., The authors are grateful to the technician M. Cabanas for some of the great quality measurements and also to UEM, UEPM and UM of SAI from UDC. This work was supported by MINECO from the Spanish Government (Grants No. MAT2014-57943-C3-1-P, MAT2014-57943-C3-2-P and MAT2014-57943-C3-3-P), COST program Action CM 1206 EXIL, and by the Xunta de Galicia through the research projects Network on Ionic Liquids, REGALIs (CN 2014/015), AGRU 2015/11 and GDR ED413C 2016/001. Research projects have been co-financed by the European Regional Development Fund (FEDER). A. M. and N. Y. acknowledge the financial support from the ÅForsk Foundation in Sweden (grant no. 16-644, 2016). We also acknowledge the European Synchrotron Radiation Facility for provision of synchrotron radiation facilities and would like to thank Dr E. Di Cola and T. Narayanan for their kind and competent assistance in exploiting beamline ID02, Xunta de Galicia; AGRU 2015/11, Xunta de Galicia; ED413C 2016/001, ÅForsk Foundation in Sweden; 16-644, 2016
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Synthesis, Microstructure and Volumetry of Novel Metal Thiocyanate Ionic Liquids With [BMIM] Cation

  • Cabeza, Óscar
  • Varela, Luis M.
  • Rilo, Esther
  • Segade, Luisa
  • Domínguez-Pérez, Montserrat
  • Ausín, David
  • Pedro, Manuel de
  • Rodríguez Fernández, Jesús
  • González, Jesús Antonio
  • Vázquez-Tato, M. Pilar
  • Arosa, Yago
  • López Lago, Elena
  • Fuente, Raúl de la
  • Parajó, Juan José
  • Salgado, Josefa
  • Villanueva López, María
  • Matveev, Vladimir V.
  • Ievlev, A.V.
  • Seijas, Julio A.
This is an accepted version of the published document., [Abstract] We present a new family of ionic liquids (ILs) with a common cation, 1-butyl-3-methyl imidazolium, the popular [BMIM]+ (also written C4C1Im+) and a variety of anionic complexes (also called adducts) based in thiocyanate (SCN)−: one blank compound, BMIM(SCN), and ten doped with metals having different oxidation states: Al+3, Mn+2, Fe+3, Cr+3, Ni+2, Hg+2, Zn+2, Co+2, Cd+2 and Cu+, forming, respectively, [BMIM]3[Al(SCN)6], [BMIM]4 Mn(SCN)6, [BMIM]3 Fe(SCN)6, [BMIM]3 Cr(SCN)6, [BMIM]4 Ni(SCN)6, [BMIM]2 Hg(SCN)4, [BMIM]2 Zn(SCN)4, [BMIM]2 Co(SCN)4, [BMIM]2 Cd(SCN)4 and [BMIM]3 Cu(SCN)4. All of them were synthesized by us, except the blank IL and the Co thiocyanate, which are commercial. Obtained products have been characterized by NMR, and also by electrospray ionization, MS-ES, which allows the determination of the new ILs purities. Then, compounds have been analyzed using FT-IR and Raman spectroscopy. In addition, magnetic susceptibility and refractive index measurements were performed in some of the compounds studied, as well as thermal characterization using DSC and TGA. Finally, experimental measurements of density on all those ILs have been performed, and for some of the samples in a broad temperature range (about 100 K). In spite of being very similar compounds from the chemical point of view, they present quite different physical properties, including optical, thermal and magnetic ones… Also, they show different oxidation states (one with +1, six with +2 and other three with +3). We guess that this family of ILs will have interesting applications, mainly for photonic devices., We acknowledge fruitful comments with our colleague Dr. A. Macías from USC. We also acknowledge the financial support of Ministerio de Economía y Competitividad (MINECO) (MAT2014-57943-C3-(1-3)-P and MAT2017-89239-C2-(1,2)-P); Xunta de Galicia (AGRU 2015/11, GRC ED431C 2016/001 and ED431D 2017/06, ED431E 2018/08). All these last research projects were partially supported by FEDER, Xunta de Galicia; AGRU 2015/11, Xunta de Galicia; ED431C 2016/001, Xunta de Galicia; ED431D 2017/06, Xunta de Galicia; ED431E 2018/08
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Determination of Thermophysical Properties of the Protic Ionic Liquid EIM NO₃, Pure and Doped with Lithium Nitrate Salt

  • Vallet Moreno, Pablo
  • Parajó, Juan José
  • Cabeza, Óscar
  • Varela, Luis M.
  • Salgado, Josefa
  • Villanueva López, María
[Abstract] In this work, viscosity, density and electrical conductivity of the ionic liquid, Ethylimidazolium Nitrate pure and doped with lithium nitrate salt were determined in order to check the properties’ improvement of the ionic liquid with the salt addition to consider these mixtures as potential electrolytes. Viscosity decreases exponentially as temperature increases, and increases with salt content, as expected. Density values decrease linearly as temperature increases and also increases with salt content. From electrical studies, an increase of conductivity with temperature and a decrease with salt concentration were observed. No significant differences between pure and doped sample were observed on Walden plots., This work was supported by Spanish Ministry of Economy and Competitiveness and FEDER Program through the projects MAT2014-57943-C3-1-P, MAT2014-57943-C3-3-P, MAT2017-89239-C2-1-P, as well as by Xunta de Galicia through GRC ED431C 2020/10 project and the Galician Network of Ionic Liquids (ReGaLIs) ED431D 2017/06. P. Vallet and J. J. Parajó thank funding support of FPI Program from Spanish Ministry of Science, Education and Universities and I2C postdoctoral Program of Xunta de Galicia, respectively, Xunta de Galicia; ED431C 2020/10, Xunta de Galicia; ED431D 2017/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Thermal Behaviour of Ionogels Based on Ionic Liquid Lithium Salt Mixtures

  • Parajó, Juan José
  • Vallet Moreno, Pablo
  • Fernández Míguez, Lois
  • Villanueva López, María
  • Cabeza, Óscar
  • Varela, Luis M.
  • Salgado, Josefa
Presented at the 24th International Electronic Conference on Synthetic Organic Chemistry, 15 November–5 December 2020; Available online: https://ecsoc-24.sciforum.net/, [Abstract] The thermal behavior of the mixtures of two protic ionic liquids (ethylammonium nitrate (EAN) and ethylimidazolium nitrate ([EIm][NO3])) with lithium nitrate salt (LiNO3), and one aprotic ionic liquid (butyl methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([BMpyrr][TFSI)) with lithium bis(trifluoromethylsulfonyl)imide salt (LiTFSI), at different concentrations, was studied in this work using a Differential Scanning Calorimeter (DSC-Q2000-TA Instruments). Comparisons with the thermal behavior of silica-based ionogels of these mixtures were also performed., This work was supported by Spanish Ministry of Economy and Competitiveness and FEDER Program through the projects MAT2014-57943-C3-1-P, MAT2014-57943-C3-3-P, MAT2017-89239-C2-1-P as well as by Xunta de Galicia through GRC ED431C 2020/10 project and the Galician Network of Ionic Liquids (ReGaLIs) ED431D 2017/06. P. Vallet and J. J. Parajó thank funding support of FPI Program from Spanish Ministry of Science, Education and Universities and I2C postdoctoral Program of Xunta de Galicia, respectively., Xunta de Galicia; ED431C 2020/10, Xunta de Galicia; ED431D 2017/06, https://sciforum.net/paper/view/8371
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Thermophysical Characterization of TFSI Based Ionic Liquid and Lithium Salt Mixtures

  • Fernández-Míguez, Lois
  • Vallet Moreno, Pablo
  • Tasende-Rodríguez, Lucía Camila
  • Doval, Alejandro
  • Villanueva López, María
  • Cabeza, Óscar
  • Varela, Luis M.
  • Salgado, Josefa
  • Parajó, Juan José
Este artigo pertence ás actas do The 23rd International Electronic Conference on Synthetic Organic Chemistry., [Abstract] The ionic liquids (ILs) doped with metal salts have become a real alternative as electrolytes for batteries, but the right choice of these compounds for reaching the adequate properties and performance is still a challenge, and strategies are therefore needed for achieving it. The thermophysical properties of IL 1-butyl-1-methylpyrrolidinium bis[(trifluoromethyl)sulfonyl]imide ([bmpyr] [TFSI]) and its mixture with bis-(trifluoromethane)-sulfonimide lithium salt (from 0.1 m to saturation level) were determined in this work. These properties are density (ρ), speed of sound (U), and corresponding derived magnitudes, such as the bulk modulus and the thermal coefficient, as well as electrical conductivity (σ) against temperature. Density shows a linear decreasing dependence with temperature and a clear increase with the addition of salt, whereas the thermal expansion coefficient increases with temperature and salt addition. Speed of sound decreases with both temperature and salt concentration, and the adiabatic compressibility calculated by means of the well-known Laplace equation increases, as expected, with temperature in all the studied cases, although a small variation with concentration was observed. Electrical conductivity increases with temperature following the Vogel–Fulcher–Tammann (VFT) equation and decreases with the addition of salt., This research was funded by the Spanish Ministry of Economy and Competitiveness and FEDER (Fondo Europeo de Desarrollo Regional) Program through the projects MAT2014-57943-C3-1-P, MAT2014-57943-C3-3-P, MAT2017-89239-C2-1-P as well as by Xunta de Galicia through the GRC (Grupo de Referencia Competitiva) ED431C 2016/001 project, and the Galician Network of Ionic Liquids (ReGaLIs) ED431D 2017/06. P. Vallet and J. J. Parajó are thankful for funding support from the FPI (Formación de Personal Investigador) Program from the Spanish Ministry of Science, Education and Universities and I2C postdoctoral Program of Xunta de Galicia, respectively., Xunta de Galicia; ED431C 2016/001, Xunta de Galicia; ED431D 2017/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Structural Characterization by NMR Procedure of C₄C₁Pyrr TFSI Doped with Lithium TFSI Salt in Liquid and Gel States

  • Vallet Moreno, Pablo
  • Parajó, Juan José
  • Fernández-Míguez, Lois
  • Sotuela, Félix
  • Morcillo, Ángel
  • Villanueva López, María
  • Cabeza, Óscar
  • Matveev, Vladimir V.
  • Ievlev, A.V.
  • Tutukin, Konstantin
  • Varela, Luis M.
  • Salgado, Josefa
[Abstract] Ionic liquids represent a viable option as electrolytes for electrochemical applications such as energy storage devices, due to their high ionic conductivity and wide electrochemical window. However, liquid electrolytes present important problems of safety and performance, and encapsulation in a solid matrix can be a good solution to improve it. In this work, changes in the structure of the mixtures of ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide and lithium bis(trifluoromethylsulfonyl)imide against the concentration of the salt (0, 0.1, and 1.5 molal), and the effect of nanoconfinement through gelation process were studied using NMR technique., This work was supported by the Spanish Ministry of Economy and Competitiveness and FEDER Program through the projects MAT2014-57943-C3-1-P, MAT2014-57943-C3-3-P, MAT2017-89239-C2-1-P as well as by Xunta de Galicia through GRC ED431C 2020/10 project and the Galician Network of Ionic Liquids (ReGaLIs) ED431D 2017/06. P. Vallet and J. J. Parajó thank funding support of FPI Program from the Spanish Ministry of Science, Education and Universities and I2C postdoctoral Program of Xunta de Galicia, respectively, Xunta de Galicia; ED431C 2020/10, Xunta de Galicia; ED431D 2017/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Liquid Range of Ionic Liquid – Metal Salt Mixtures for Electrochemical Applications

  • Salgado, Josefa
  • Parajó, Juan José
  • Villanueva López, María
  • Rodríguez, Julio R.
  • Cabeza, Óscar
  • Varela, Luis M.
This is an accepted version of the published document., [Abstract] The effect of the nitrate salt addition on the liquid range of the protic ionic liquid ethylammonium nitrate (EAN) was studied in this work. The salts used were monovalent, LiNO3; divalent, Mg(NO3)2 and Ca(NO3)2, and trivalent, Al(NO3)3; inorganic salts containing metals relevant for electrochemical applications. Solid-liquid transitions, which define the lower limit of the liquid range of the fluids, were determined using differential scanning calorimetry (DSC), whereas the upper limit, which is given by degradation or boiling temperatures, was determined by means of thermogravimetric analysis (TGA). Our results show that salt addition induces melting-point depressions, but no significant boiling point elevations were detected. The so-called nanostructured solvation mechanism is used in order to rationalize the thermodynamics of the mixtures in terms of the occurrence of highly incompressible, low mobility solvation complexes [M(NO3)n]z+−n in the polar cavities of the IL giving rise to pseudo-lattice nanocrystals that are stable in the liquid phase., Authors acknowledge M. Gómez (RIAIDT-USC) for the technical support in DSC measurements. This work was supported by Spanish Ministry of Economy and Competitiveness and FEDER Program through the projects MAT2014-57943-C3-1-P, MAT2014-57943-C3-3-P, MAT2017-89239-C2-1-P and MAT2017-89239-C2-2-P as well as by Xunta de Galicia through GRC ED431C 2016/001 and ED431E 2018/08 projects and the Galician Network of Ionic Liquids (ReGaLIs) ED431D 2017/06, Xunta de Galicia; ED431C 2016/001, Xunta de Galicia; ED431E 2018/08, Xunta de Galicia; ED431D 2017/06