Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlling the Thermoelectric Properties of Organometallic Coordination Polymers via Ligand Design

  • Liu, Zilu
  • Liu, Tianjun
  • Savory, Christopher N.
  • Jurado, José Piers
  • Reparaz, J. S.
  • Li, Jianwei
  • Pan, Long
  • Faul, Charl F. J.
  • Parkin, Ivan P.
  • Sankar, Gopinathan
  • Matsuishi, Satoru
  • Campoy Quiles, Mariano
  • Scanlon, David O.
  • Zwijnenburg, Martijn A.
  • Fenwick, Oliver
  • Schroeder, Bob C.
Organometallic coordination polymers (OMCPs) are a promising class of thermoelectric materials with high electrical conductivities and thermal resistivities. The design criteria for these materials, however, remain elusive and so far material modifications have been focused primarily on the nature of the metal cation to tune the thermoelectric properties. Herein, an alternative approach is described by synthesizing new organic ligands for OMCPs, allowing modulation of the thermoelectric properties of the novel OMCP materials over several orders of magnitude, as well as controlling the polarity of the Seebeck coefficient. Extensive material purification combined with spectroscopy experiments and calculations furthermore reveal the charge‐neutral character of the polymer backbones. In the absence of counter‐cations, the OMCP backbones are composed of air‐stable, ligand‐centered radicals. The findings open up new synthetic possibilities for OMCPs by removing structural constraints and putting significant emphasis on the molecular structure of the organic ligands in OMCP materials to tune their thermoelectric properties., The authors gratefully acknowledge Dr. Mark Baxendale for the use of the MMR Seebeck instrument, as well as Dr. Shibo Xi for the support and assistance provided during the XANES measurements. Z.L., T.L. and J.L. acknowledge the support from Chinese Scholarship Council (CSC). B.C.S. acknowledges funding by the Leverhulme Trust (Grant RF‐2017‐655\4) and the EPSRC (EP/P007767/1). M.A.Z. acknowledges the UK Engineering and Physical Sciences Research Council (EPSRC) for funding (Grant EP/N004884/1, Integration of Computation and Experiment for Accelerated Materials Discovery). B.C.S. and M.A.Z. acknowledge the EPSRC (Grant EP/R034540/1, Defect Functionalized Sustainable Energy Materials: From Design to Devices Application). O.F. acknowledges the support of The Royal Society (UF140372). The authors at ICMAB would like to acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the “‘Severo Ochoa”' Program for Centers of Excellence in R&D (SEV‐2015‐0496), PGC2018‐095411‐B‐I00, and MAT2017‐ 90024‐P, and from the European Research Council (ERC) under grant agreement no. 648901. J. P. J. has received financial support through the “la Caixa” INPhINIT Fellowship Grant (Grant code: LCF/BQ/IN17/11620035). L.P. acknowledges a Newton Fellowship from the Royal Society for funding (grant reference NF170361). The use of the UCL Legion, Myriad, and Grace High Performance Computing Facilities (Legion@UCL, Myriad@UCL and Grace@UCL) is acknowledged in the production of this work. Computational work was also performed on the ARCHER UK National Supercomputing Service, via our membership of the UK's HEC Materials Chemistry Consortium, funded by EPSRC (EP/L000202 and EP/R029431), and the UK Materials and Molecular Modelling Hub, which is partially funded by EPSRC (EP/P020194/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Near infrared organic photodetectors based on enhanced charge transfer state absorption by photonic architectures

  • Gibert Roca, Martí
  • Molet, Pau
  • Mihi, Agustín
  • Campoy Quiles, Mariano
Near infrared photodetectors are a widespread and fundamental technology in many disciplines, from astronomy and telecommunications to medical sciences. Current technologies are now striving to include new aspects in this technology such as wearability, flexibility and tunability. Organic photodetectors easily offer many of those advantages but their relatively high bandgaps hinder NIR operation. In this work, we demonstrate solution processed organic photodetectors with improved NIR response thanks to a nanostructured active layer in the shape of a photonic crystal. The latter strongly increases the charge transfer state absorption, which is normally weak but broadband, increasing the optical path of light and resulting in remarkable photoresponse significantly below the band gap of the blend. We show responsivities up to 50 mA W−1 at 900 nm for PBTTT:PC71BM based photodetectors. On top of that, by varying the lattice parameter of the photonic crystal structure, the spectral response of the photodetectors can be tuned beyond 1000 nm. Furthermore, our photonic structure can be easily implemented in the device in a single nanoimprinting step, with minimal disruption on the fabrication process, which makes this approach very promising for upscaling., We greatly acknowledge financial support from the Ministerio de Ciencia, Innovación y Universidades MICINN with projects PGC2018-095411-B-I00, MAT2016-79053-P and MAT2015-70850-P and the “Severo Ochoa” excellence program SEV-2015-0496; Generalitat de Catalunya program AGAUR 2017-SGR-00488; and the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grants no. CoG648901 and StG637116). P. M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF. M. G. R. acknowledges financial support from an FPU grant (no. 16/02631) (2017) of the MICINN (Spain). M. G. R. and P. M. B. acknowledge the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid and high-resolution patterning of microstructure and composition in organic semiconductors using ‘molecular gates’

  • Perevedentsev, Aleksandr
  • Campoy Quiles, Mariano
Photolithography has been a major enabling tool for miniaturisation of silicon devices that underpinned the electronics revolution. Rapid, high-resolution patterning of key material characteristics would, similarly, accelerate the advent of molecular electronics and photonics. Here we advance a versatile approach employing local diffusion of functional small-molecular compounds through a solution-processed ‘molecular gate’ interlayer. Diffusion is activated using laser light or solvent vapour jets―a process that can be finely modulated down to molecule-on-demand deposition precision with almost photolithographic resolution (<5 μm) and speeds (3 mm s–1). Examples of principal pattern types are presented including molecular conformation for integrated photonics; chain orientation for polarised security features and micro-engineered electronics; and doping with local conductivity values >3 S cm–1 for improved electronic devices. Finally, we demonstrate the unique capability for one-step patterning of multiple functionalities by spatially modulating composition in ternary blends, leading to locally tunable photoluminescence from blue to red., We are indebted to Enrique Pascual (ICMAB-CSIC) for providing insights into laser patterning and Lou Kiss (Middlesex University) for freely shared advice on the preparation of the graphics. We express our deepest gratitude to Paul Smith (ETH Zürich) for critically reviewing the manuscript. We thank Miquel Casademont-Viñas (ICMAB-CSIC) for invaluable contribution to exploring the limits of the method, and Agustín Mihi and Andrés Gómez (ICMAB-CSIC) for assistance with optical spectroscopy and AFM analysis. We also thank Daniel Kremer and Hans-Werner Schmidt (Universität Bayreuth) for their customary hospitality and assistance with DSC measurements. We further acknowledge financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496) and project reference PGC2018-095411-B-I00, as well as the European Research Council (ERC) under grant agreement number 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Homoconjugation in Light-Emitting Poly(phenylene methylene)s: Origin and Pressure-Enhanced Photoluminescence

  • Perevedentsev, Aleksandr
  • Francisco López, Adrián
  • Shi, Xingyuan
  • Braendle, Andreas
  • Caseri, Walter R.
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
The surprising optical properties of the non--conjugated polymer poly(phenylene methylene) (PPM) and its derivatives—that is, absorption in the 350–450 nm and photoluminescence (PL) in the 400–600 nm spectral regions—have been attributed to chromophores formed by homoconjugation along the polymer chain. The enabling role of homoconjugation, however, was hitherto ascertained primarily by excluding alternative origins of luminescence. The present study offers direct evidence for homoconjugation by employing optical and vibrational spectroscopy to investigate the interplay between microstructure and solid-state optical properties of PPM and its derivative poly(2,4,6-trimethylphenylene methylene) (PTMPM). In particular, polarized Raman and PL spectroscopy of melt-drawn fibers reveal a preferentially perpendicular orientation of the phenylene rings relative to the fiber axis, while, simultaneously, a preferentially parallel orientation of the transition dipole moment. PL spectroscopy under applied hydrostatic pressure yields a nearly 4-fold increase in PL intensity at 8 GPa, together with a surprising absence of excimer emission. These characteristics, being highly atypical of conventional -conjugated polymers, highlight the different origin of the optical properties of poly(phenylene methylene)s as well as unique opportunities for applications., The authors thank Drs Nathan Cheetham (Imperial College London) and Johannes Gierschner (IMDEA Nanociencia) for stimulating discussions. A.P. is indebted to the Great European Lockdown (GEL) network for enabling Prof. Paul Smith (ETH Zürich) to comprehensively review this manuscript on one of his lesser favored topics, for which he is also thanked sincerely. The Spanish Ministerio de Ciencia, Innovación y Universidades is gratefully acknowledged for its support through grant no. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence Program and through grant PGC2018-095411-B-100 (RAINBOW). We also thank the Catalan agency AGAUR for grant 2017-SGR-00488. AFL acknowledges a FPI fellowship (BES-2016-076913) from the Spanish Ministerio cofinanced by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled. Financial support is also acknowledged from the European Research Council through project ERC CoG648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suppressing Co-Crystallization of Halogenated Non-Fullerene Acceptors for Thermally Stable Ternary Solar Cells

  • Hultmark, Sandra
  • Paleti, Sri Harish Kumar
  • Harillo Baños, Albert
  • Marina, Sara
  • Nugroho, Ferry Anggoro Ardy
  • Liu, Yanfeng
  • Ericsson, Leif K. E.
  • Li, Ruipeng
  • Martín, Jaime
  • Bergqvist, Jonas
  • Langhammer, Christoph
  • Zhang, Fengling
  • Yu, Liyang
  • Campoy Quiles, Mariano
  • Moons, Ellen
  • Baran, Derya
  • Müller, Christian
While photovoltaic blends based on non‐fullerene acceptors are touted for their thermal stability, this type of acceptor tends to crystallize, which can result in a gradual decrease in photovoltaic performance and affects the reproducibility of the devices. Two halogenated indacenodithienothiophene‐based acceptors that readily co‐crystallize upon mixing are studied, which indicates that the use of an acceptor mixture alone does not guarantee the formation of a disordered mixture. The addition of the donor polymer to the acceptor mixture readily suppresses the crystallization, which results in a fine‐grained ternary blend with nanometer‐sized domains that do not coarsen due to a high Tg ≈ 200 °C. As a result, annealing at temperatures of up to 170 °C does not markedly affect the photovoltaic performance of ternary devices, in contrast to binary devices that suffer from acceptor crystallization in the active layer. The results indicate that the ternary approach enables the use of high‐temperature processing protocols, which are needed for upscaling and high‐throughput fabrication of organic solar cells. Further, ternary devices display a stable photovoltaic performance at 130 °C for at least 205 h, which indicates that the use of acceptor mixtures allows to fabricate devices with excellent thermal stability., S.H. and S.H.K.P. contributed equally to this work. The authors acknowledge the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR) under OSR‐2018‐CPF‐4106 and the Knut and Alice Wallenberg Foundation through the project “Mastering Morphology for Solution‐borne Electronics” (2016.0059) for funding. M.C.‐Q. and A.H. acknowledge the European Research Council (ERC) for funding under grant agreement no. 648901. The authors thank MCIU for a Ramón y Cajal contract, Ikerbasque Foundation for the Fellow program (J.M) and grants Ref. PGC2018‐094620‐A‐100, SEV‐2015‐0496 and PGC2018‐095411‐B‐100. L.Y. thanks the National Nature Science Foundation of China (NSFC 21905185) for financial support. The authors thank the National Synchrotron Light Source II, Brookhaven National Lab (Suffolk, Upton, New York, USA) for beamtime., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoluminescence of bound-exciton complexes and assignment to shallowdefects in methylammonium/formamidinium lead iodide mixed crystals

  • Francisco López, Adrián
  • Charles, Bethan
  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Weller, Mark T.
  • Goñi, Alejandro R.
The high defect tolerance of metal halide perovskites, in terms of their exceptional optoelectronic properties, is assumed to be due to the very fact that most native point defects are shallow, which does not contribute to the non‐radiative recombination of free carriers. Here, a systematic study is presented, which concerns the evolution of shallow‐defect signatures observed at low temperatures in the photoluminescence (PL) spectra of mixed organic‐cation lead iodide perovskite single crystals (FAxMA1−xPbI3, where MA stands for methylammonium and FA for formamidinium). Below ≈100 K, a number of peak‐like features become clearly apparent in the PL spectra at energies lower than the strong free‐exciton emission, which are related to the radiative recombination of bound exciton complexes associated with native shallow defects (donors and/or acceptors). Based on state‐of‐the‐art ab initio calculations, a tentative assignment is provided for all PL features to different shallow‐defects (Pb, I, and MA vacancies as well as I interstitials) typically present in hybrid perovskites. The defect‐related signatures exhibit a clear trend regarding the mixed‐crystal composition, indicating that the material becomes less prone to defect formation with increasing FA content., The authors thank M. Campoy‐Quiles for fruitful discussions. The Spanish “Ministerio de Ciencia e Innovación (MICINN)” is gratefully acknowledged for its support through grant Nos. SEV‐2015‐0496 (FUNMAT) and CEX2019‐000917‐S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grant PGC2018‐095411‐B‐100 (RAINBOW). The authors also thank the Catalan agency AGAUR for grant 2017‐SGR‐00488 and the National Network “Red Perovskitas” (MICINN funded). A.F.L. acknowledges an FPI fellowship (BES‐2016‐076913) from MICINN co‐financed by the European Social Fund and the Ph.D. programme in Materials Science from Universitat Autònoma de Barcelona in which he was enrolled. B.C. thanks the EPSRC for Ph.D. studentship funding via the University of Bath, CSCT CDT (EP/G03768X/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling Electron–Phonon Coupling and Thermal Expansion Effects in the Band Gap Renormalization of Perovskite Nanocrystals

  • Rubino, Andrea
  • Francisco López, Adrián
  • Barker, Alex J.
  • Petrozza, Annamaria
  • Calvo, Mauricio E.
  • Goñi, Alejandro R.
  • Míguez, Hernán
The complex electron−phonon interaction occurring in bulk lead halide perovskites gives rise to anomalous temperature dependences, like the widening of the electronic band gap as temperature increases. However, possible confinement effects on the electron−phonon coupling in the nanocrystalline version of these materials remain unexplored. Herein, we study the temperature (ranging from 80 K to ambient) and hydrostatic pressure (from atmospheric to 0.6 GPa) dependence of the photoluminescence of ligand-free methylammonium lead triiodide nanocrystals with controlled sizes embedded in a porous silica matrix. This analysis allowed us to disentangle the effects of thermal expansion and electron−phonon interaction. As the crystallite size decreases, the electron−phonon contribution to the gap renormalization gains in importance. We provide a plausible explanation for this observation in terms of quantum confinement effects, showing that neither thermal expansion nor electron−phonon coupling effects may be disregarded when analyzing the temperature dependence of the optoelectronic properties of perovskite lead halide nanocrystals., Funding for this work was provided by the Spanish “Ministerio de Ciencia, Innovacion y Universidades (MCIU) ́ ” through Grants SEV-2015-0496 and CEX2019-000917-S, in the framework of the Spanish Severo Ochoa Centre of Excellence program; the AEI/FEDER(UE) Grants MAT2015-70850-P (HIBRI2), MAT2017-88584-R (MODO), and PGC2018- 095411-B-100 (RAINBOW); and the FPI fellowships BES2016-076913 (AFL) and BES-2015-072687 (AR). The Catalan agency AGAUR is also acknowledged for Grant 2017-SGR-00488. The authors are also grateful to the National Network “Red Perovskitas” (MCIU funded) and the Center of Technological Research and Innovation of the University of Seville (CITIUS), where structural characterization was performed., Peer reviewed