Pasar al contenido principal

NUEVAS TECNOLOGIAS PARA EL DESARROLLO DE INJERTOS OSEOS OSTEOINDUCTIVOS Y ANTIMICROBIANOS CON ALTAS PRESTACIONES

PID2019-103892RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cold plasma-treated medium preferentially eliminates doxorubicin-resistant osteosarcoma cells

  • Tornín, Juan
  • Gallego, Borja
  • Rey, Verónica
  • Murillo, Dzohara
  • Huergo, Carmen
  • Rodríguez, Aída
  • Canal, Cristina
  • Rodríguez, René
Osteosarcoma (OS) is an aggressive bone cancer with poor prognosis, largely due to the limited effectiveness of current treatments such as doxorubicin (DX). Developing ways to overcome DX resistance is a significant clinical challenge. Here, we used two DX-resistant models to study the potential of Cold Plasma Treated Medium (PTM) to prevent DX resistance in OS. During the acquisition of the resistant phenotype upon long-term DX exposure, OS resistant cells became less proliferative, overexpressed the drug resistance-related efflux pump MDR1 and displayed a concomitant loss of SOD2 or GPX1. According to the reduced expression of these antioxidant enzymes, PTM treatment produced higher levels of oxidative express and was more effective in eradicating DX-resistant cells. Moreover, PTM reduced the expression of MDR1, thus sensitizing resistant cells to DX. These findings uncover new vulnerabilities of DX-resistant cells related with their inability to cope with excessive oxidative stress and their dependence on MDR1 that can be exploited using PTM-based treatments to provide new therapeutic approaches for the management of drug resistance in OS., This work was supported by the Agencia Estatal de Investigación (AEI) [MICINN/Fondo Europeo de Desarrollo Regional (FEDER) (grants PID2019-106666RB-I00 and PID2022-142020OB-I00 to R.R. and PID2019- 103892RB-I00/AEI/10.13039/501100011033 to C.C.) and ISC III/FEDER (Consorcio CIBERONC - CB16/12/00390]; the Plan de Ciencia Tecnología e Innovación del Principado de Asturias/FEDER [grant IDI/2021/000027 to R.R. and Severo Ochoa predoctoral fellowships BP‐ 20–046 to B.G. and BP-21–084 to DM]; Fundación Científca de la Asociación Española Contra el Cáncer (AECC) (predoctoral fellowship to CH); CC belongs to SGR2022-1368 and acknowledges Generalitat de Catalunya for the ICREA Academia Award for Excellence in Research., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Synchrotron cryo-soft X-ray microscopy reveals bacterial interactions with nanostructured calcium phosphate substrates

  • Iglesias Fernández, Marc|||0000-0003-4544-1793
  • Pérez-Berná, Ana Joaquina
  • Pereiro López, Eva
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Español Pons, Montserrat|||0000-0001-7510-0602
Nanostructured synthetic bone grafts offer a promising strategy to prevent bacterial colonisation while supporting bone regeneration. Here, calcium-deficient hydroxyapatite (CDHA) nanopillars synthesized from a-tricalcium phosphate exhibit contact-killing activity against Gram-positive Bacillus subtilis. Unlike inert bactericidal surfaces, CDHA exchanges ions with the surrounding environment, introducing chemical interactions alongside mechanical damage. Using synchrotron cryo-soft X-ray tomography and spectromicroscopy, we visualise bacterial ultrastructure and intracellular ionic changes in fully hydrated cells at subcellular resolution. Some bacteria exposed to the nanotopographies display membrane rupture, cytosolic leakage, and multivesicular body formation, indicating severe stress responses. XANES cryo-spectromicroscopy and linear absorption coefficient analysis identify a bacterial subpopulation with increased intracellular calcium, correlating with calcium release from the substrate and confirmed by confocal microscopy. However, this calcium accumulation does not affect viability, consistent with the halotolerant nature of B. subtilis. These findings provide insights into the combined effects of nanotopography and surface chemistry on bacterial responses., The authors are grateful to Andrea Sorrentino for his contributions to the experimental methodology and validation of the results, Jessica do Nascimento Faria da Souza for cryo-SXT sample preparation, Isaac López Insa for FE-SEM image acquisition of bacterial samples, and Pablo Guardia for providing access to TEM imaging. Cryo-SXT experiments were performed at the BL09 Mistral beamline at ALBA Synchrotron with the collaboration of ALBA staff. This work was supported by the European Research Council (ERC; grant agreement number 101055053 [BAMBBI]). The research group is part of the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/ funded by MCIN/AEI/10.13039/501100011033, Spanish Ministry of Science and Innovation. M.I.F. acknowledges the FPI-MEC scholarship under the PID2019−103892RB-I00 project, and M.P.G. the ICREA Academia award by the Generalitat de Catalunya., 3 - Salut i Benestar
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

3D printing with star-shaped strands: a new approach to enhance in vivo bone regeneration

  • Raymond Llorens, Santiago|||0000-0001-8302-3002
  • Lehmann, Cyril
  • Thorel, Emilie
  • Benítez Iglesias, Raúl|||0000-0002-8782-9406
  • Riveiro Rodríguez, Antonio
  • Pou Saracho, Juan María
  • Manzanares Céspedes, Maria Cristina
  • Franch Serracanta, Jordi
  • Canal Barnils, Cristina|||0000-0002-3039-7462
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
Concave surfaces have shown to promote bone regeneration in vivo. However, bone scaffolds obtained by direct ink writing, one of the most promising approaches for the fabrication of personalized bone grafts, consist mostly of convex surfaces, since they are obtained by microextrusion of cylindrical strands. By modifying the geometry of the nozzle, it is possible to print 3D structures composed of non-cylindrical strands and favor the presence of concave surfaces. In this work, we compare the in vivo performance of 3D-printed calcium phosphate scaffolds with either conventional cylindrical strands or star-shaped strands, in a rabbit femoral condyle model. Monocortical defects, drilled in contralateral positions, are randomly grafted with the two scaffold configurations, with identical composition. The samples are explanted eight weeks post-surgery and assessed by µ-CT and resin-embedded histological observations. The results reveal that the scaffolds containing star-shaped strands have better osteoconductive properties, guiding the newly formed bone faster towards the core of the scaffolds, and enhance bone regeneration, although the increase is not statistically significant (p > 0.05). This new approach represents a turning point towards the optimization of pore shape in 3D-printed bone grafts, further boosting the possibilities that direct ink writing technology offers for patient-specific applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Does non-thermal plasma modify biopolymers in solution? A chemical and mechanistic study for alginate

  • Tampieri, Francesco|||0000-0003-1474-867X
  • Espona Noguera, Albert|||0000-0002-3681-030X
  • Labay, Cédric Pierre|||0000-0001-5147-5100
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Yusupov, Maksudbek
  • Bogaerts, Annemie
  • Canal Barnils, Cristina|||0000-0002-3039-7462
In the last decades, non-thermal plasma has been extensively investigated as a relevant tool for various biomedical applications, ranging from tissue decontamination to regeneration and from skin treatment to tumor therapies. This high versatility is due to the different kinds and amount of reactive oxygen and nitrogen species that can be generated during a plasma treatment and put in contact with the biological target. Some recent studies report that solutions of biopolymers with the ability to generate hydrogels, when treated with plasma, can enhance the generation of reactive species and influence their stability, resulting thus in the ideal media for indirect treatments of biological targets. The direct effects of the plasma treatment on the structure of biopolymers in water solution, as well as the chemical mechanisms responsible for the enhanced generation of RONS, are not yet fully understood. In this study, we aim at filling this gap by investigating, on the one hand, the nature and extent of the modifications induced by plasma treatment in alginate solutions, and, on the other hand, at using this information to explain the mechanisms responsible for the enhanced generation of reactive species as a consequence of the treatment. The approach we use is twofold: (i) investigating the effects of plasma treatment on alginate solutions, by size exclusion chromatography, rheology and scanning electron microscopy and (ii) study of a molecular model (glucuronate) sharing its chemical structure, by chromatography coupled with mass spectrometry and by molecular dynamics simulations. Our results point out the active role of the biopolymer chemistry during direct plasma treatment. Short-lived reactive species, such as OH radicals and O atoms, can modify the polymer structure, affecting its functional groups and causing partial fragmentation. Some of these chemical modifications, like the generation of organic peroxide, are likely responsible for the secondary generation of long-lived reactive species such as hydrogen peroxide and nitrite ions. This is relevant in view of using biocompatible hydrogels as vehicles for storage and delivery reactive species for targeted therapies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A multiparametric advection-diffusion reduced-order model for molecular transport in scaffolds for osteoinduction

  • Muixí Ballonga, Alba|||0000-0002-4420-3366
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Calvet Tordera, Pere
  • Español Pons, Montserrat|||0000-0001-7510-0602
  • Lodoso Torrecilla, Irene|||0000-0003-1849-5243
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Díez, Pedro|||0000-0001-6464-6407
  • García González, Alberto|||0000-0003-2841-016X
The version of record is available online at: http://dx.doi.org/10.1007/s10237-022-01577-2, Scaffolds are microporous biocompatible structures that serve as material support for cells to proliferate, differentiate and form functional tissue. In particular, in the field of bone regeneration, insertion of scaffolds in a proper physiological environment is known to favour bone formation by releasing calcium ions, among others, triggering differentiation of mesenchymal cells into osteoblasts. Computational simulation of molecular distributions through scaffolds is a potential tool to study the scaffolds’ performance or optimal designs, to analyse their impact on cell differentiation, and also to move towards reduction in animal experimentation. Unfortunately, the required numerical models are often highly complex and computationally too costly to develop parametric studies. In this context, we propose a computational parametric reduced-order model to obtain the distribution of calcium ions in the interstitial fluid flowing through scaffolds, depending on several physical parameters. We use the well-known Proper Orthogonal Decomposition (POD) with two different variations: local POD and POD with quadratic approximations. Computations are performed using two realistic geometries based on a foamed and a 3D-printed scaffolds. The location of regions with high concentration of calcium in the numerical simulations is in fair agreement with regions of bone formation shown in experimental observations reported in the literature. Besides, reduced-order solutions accurately approximate the reference finite element solutions, with a significant decrease in the number of degrees of freedom, thus avoiding computationally expensive simulations, especially when performing a parametric analysis. The proposed reduced-order model is a competitive tool to assist the design of scaffolds in osteoinduction research., The authors acknowledge the financial support from the Ministerio de Ciencia e Innovación (MCIN/ AEI/10.13039/501100011033) through the grants PID2020-113463RBC32, PID2020-113463RB-C33, CEX2018-000797-S and PID2019-103892RB-I00, and the Generalitat de Catalunya for the Serra Hunter Fellowship of ME and the ICREA Academia Award of MPG., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

One-step liquid phase polymerization of HEMA by atmospheric-pressure plasma discharges for Ti dental implants

  • Buxadera-Palomero, Judit
  • Fricke, Katja
  • Reuter, Stephan
  • Gil, FJ
  • Rodriguez, Daniel
  • Canal Barnils, Cristina
This article is based upon work from COST Action TD1208, supported by COST (European Cooperation in Science and Technology). The authors acknowledge MINECO for their support through project PID2019-103892RB-I00 and projects RTI2018-098075-B-C21 and MAT2017-83905-R, co-funded by the EU through European Regional Development Funds. SR acknowledges funding by the German Ministry of Education and Research (BMBF, grant number 03Z2DN12). Data discussion and manuscript editing was performed during funding within the TransMedTech Institute by the Canada First Research Excellence Fund and Fonds de Recherche du Quebec (S.R.)., Dental implants can fail due to various factors, in which bad tissue integration is believed to have a significant role. Specific properties of the implant surface, such as its chemistry and roughness, are of paramount importance to address specific cell responses, such as the adsorption of proteins, as well as the adhesion and differentiation of cells, which are suitable for biomaterial and tissue engineering. In this study, an acrylate-containing coating was produced on titanium surfaces through the atmospheric pressure plasma treatment of a liquid precursor, 2-hydroxyethyl methacrylate. A hydrophilic coating was obtained, showing retention of the monomer chemistry as assessed by FTIR analysis and XPS. Enhanced fibroblast adhesion and decreased Staphylococcus aureus and Escherichia coli adhesion were recorded, showing that this is a suitable method to produce biocompatible coatings with a reduced bacterial adhesion., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Does non-thermal plasma modify biopolymers in solution? A chemical and mechanistic study for alginate

  • Tampieri, Francesco
  • Espona Noguera, Albert
  • Labay, Cédric Pierre
  • Ginebra Molins, Maria Pau
  • Yusupov, Maksudbek
  • Bogaerts, Annemie
  • Canal Barnils, Cristina
In the last decades, non-thermal plasma has been extensively investigated as a relevant tool for various biomedical applications, ranging from tissue decontamination to regeneration and from skin treatment to tumor therapies. This high versatility is due to the different kinds and amount of reactive oxygen and nitrogen species that can be generated during a plasma treatment and put in contact with the biological target. Some recent studies report that solutions of biopolymers with the ability to generate hydrogels, when treated with plasma, can enhance the generation of reactive species and influence their stability, resulting thus in the ideal media for indirect treatments of biological targets. The direct effects of the plasma treatment on the structure of biopolymers in water solution, as well as the chemical mechanisms responsible for the enhanced generation of RONS, are not yet fully understood. In this study, we aim at filling this gap by investigating, on the one hand, the nature and extent of the modifications induced by plasma treatment in alginate solutions, and, on the other hand, at using this information to explain the mechanisms responsible for the enhanced generation of reactive species as a consequence of the treatment. The approach we use is twofold: (i) investigating the effects of plasma treatment on alginate solutions, by size exclusion chromatography, rheology and scanning electron microscopy and (ii) study of a molecular model (glucuronate) sharing its chemical structure, by chromatography coupled with mass spectrometry and by molecular dynamics simulations. Our results point out the active role of the biopolymer chemistry during direct plasma treatment. Short-lived reactive species, such as OH radicals and O atoms, can modify the polymer structure, affecting its functional groups and causing partial fragmentation. Some of these chemical modifications, like the generation of organic peroxide, are likely responsible for the secondary generation of long-lived reactive species such as hydrogen peroxide and nitrite ions. This is relevant in view of using biocompatible hydrogels as vehicles for storage and delivery reactive species for targeted therapies., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A multiparametric advection-diffusion reduced-order model for molecular transport in scaffolds for osteoinduction

  • Muixí Ballonga, Alba
  • Zlotnik, Sergio
  • Calvet Tordera, Pere
  • Español Pons, Montserrat
  • Lodoso Torrecilla, Irene
  • Ginebra Molins, Maria Pau
  • Díez, Pedro
  • García González, Alberto
The version of record is available online at: http://dx.doi.org/10.1007/s10237-022-01577-2, Scaffolds are microporous biocompatible structures that serve as material support for cells to proliferate, differentiate and form functional tissue. In particular, in the field of bone regeneration, insertion of scaffolds in a proper physiological environment is known to favour bone formation by releasing calcium ions, among others, triggering differentiation of mesenchymal cells into osteoblasts. Computational simulation of molecular distributions through scaffolds is a potential tool to study the scaffolds’ performance or optimal designs, to analyse their impact on cell differentiation, and also to move towards reduction in animal experimentation. Unfortunately, the required numerical models are often highly complex and computationally too costly to develop parametric studies. In this context, we propose a computational parametric reduced-order model to obtain the distribution of calcium ions in the interstitial fluid flowing through scaffolds, depending on several physical parameters. We use the well-known Proper Orthogonal Decomposition (POD) with two different variations: local POD and POD with quadratic approximations. Computations are performed using two realistic geometries based on a foamed and a 3D-printed scaffolds. The location of regions with high concentration of calcium in the numerical simulations is in fair agreement with regions of bone formation shown in experimental observations reported in the literature. Besides, reduced-order solutions accurately approximate the reference finite element solutions, with a significant decrease in the number of degrees of freedom, thus avoiding computationally expensive simulations, especially when performing a parametric analysis. The proposed reduced-order model is a competitive tool to assist the design of scaffolds in osteoinduction research., The authors acknowledge the financial support from the Ministerio de Ciencia e Innovación (MCIN/ AEI/10.13039/501100011033) through the grants PID2020-113463RBC32, PID2020-113463RB-C33, CEX2018-000797-S and PID2019-103892RB-I00, and the Generalitat de Catalunya for the Serra Hunter Fellowship of ME and the ICREA Academia Award of MPG., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

3D printing with star-shaped strands: a new approach to enhance in vivo bone regeneration

  • Raymond Llorens, Santiago
  • Lehmann, Cyril
  • Thorel, Emilie
  • Benítez Iglesias, Raúl
  • Riveiro Rodríguez, Antonio
  • Pou Saracho, Juan María
  • Manzanares Céspedes, Maria Cristina
  • Franch Serracanta, Jordi
  • Canal Barnils, Cristina
  • Ginebra Molins, Maria Pau
Concave surfaces have shown to promote bone regeneration in vivo. However, bone scaffolds obtained by direct ink writing, one of the most promising approaches for the fabrication of personalized bone grafts, consist mostly of convex surfaces, since they are obtained by microextrusion of cylindrical strands. By modifying the geometry of the nozzle, it is possible to print 3D structures composed of non-cylindrical strands and favor the presence of concave surfaces. In this work, we compare the in vivo performance of 3D-printed calcium phosphate scaffolds with either conventional cylindrical strands or star-shaped strands, in a rabbit femoral condyle model. Monocortical defects, drilled in contralateral positions, are randomly grafted with the two scaffold configurations, with identical composition. The samples are explanted eight weeks post-surgery and assessed by µ-CT and resin-embedded histological observations. The results reveal that the scaffolds containing star-shaped strands have better osteoconductive properties, guiding the newly formed bone faster towards the core of the scaffolds, and enhance bone regeneration, although the increase is not statistically significant (p > 0.05). This new approach represents a turning point towards the optimization of pore shape in 3D-printed bone grafts, further boosting the possibilities that direct ink writing technology offers for patient-specific applications., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Osteogenic differentiation of adipose-derived canine mesenchymal stem cells seeded in porous calcium-phosphate scaffolds

  • Herrera Bejarano, David|||0000-0003-1125-9707
  • Lodoso-Torrecilla, Irene
  • Ginebra, Maria-Pau
  • Rappe, Katrin Steffanie
  • Franch, Jordi|||0000-0002-3731-8552
Engineered bone graft substitutes are a promising alternative and supplement to autologous bone grafts as treatments for bone healing impairment. Advances in human medicine extend an invitation to pursue these biomimetic strategies in animal patients, substantiated by the theory that specialized scaffolds, multipotent cells, and biological cues may be combined into a bioactive implant intended for the enhancement of tissue regeneration. This proof-of-concept study was designed to evaluate and validate the feasibility of beta-tricalcium phosphate foam scaffolds seeded with canine mesenchymal stem cells derived from adipose tissue. Cell-inoculated samples and sham controls were cultured statically for 72 hours in complete growth medium to evaluate seeding capacity, while a subset of loaded scaffolds was further induced with osteogenic culture medium for 21 days. Produced implants were characterized and validated with a combination of immunofluorescence and reflection confocal microscopy, scanning electron microscopy, and polymerase chain reaction to confirm osteogenic differentiation in tridimensional-induced samples. After 72 hours of culture, all inoculated scaffolds presented widespread yet heterogeneous surface seeding, distinctively congregating stem cells around pore openings. Furthermore, at 21 days of osteogenic culture conditions, robust osteoblastic differentiation of the seeded cells was confirmed by the change of cell morphology and evident deposition of extra-cellular matrix, accompanied by mineralization and scaffold remodeling; furthermore, all induced cell-loaded implants lost specific stemness immunophenotype expression and simultaneously upregulated genomic expression of osteogenic genes Osterix and Ostecalcin. β-TCP bio-ceramic foam scaffolds proved to be suitable carriers and hosts of canine adipose-derived MSCs, promoting not only surface attachment and proliferation, but also demonstrating strong in-vitro osteogenic potential. Although this research provides satisfactory in-vitro validation for the conceptualization and feasibility of a canine bio-active bone implant, further testing such as patient safety, large-scale reproducibility, and quality assessment are needed for regulatory compliance in future commercial clinical applications.