Pasar al contenido principal

INGENIERIA COMPUTACIONAL BASADA EN SIMULACION DE APRENDIZAJE AUTOMATICO

PID2020-113463RB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A face-centred finite volume approach for coupled transport phenomena and fluid flow

  • Burcet Rodríguez, Martí|||0000-0002-7422-3368
  • Oliveira, Beñat
  • Afonso, Juan Carlos
  • Zlotnik, Sergio|||0000-0001-9674-8950
© 2024 Elsevier. This manuscript version is made available under the CC BY 4.0 DEED license https://creativecommons.org/licenses/by/4.0/, We present a particular derivation of the face-centred finite volume (FCFV) method and study its performance in non-linear, coupled transport problems commonly encountered in geoscientific and geotechnical applications. The FCFV method is derived from the hybridisable discontinuous Galerkin formulation, using a constant degree of approximation for the discretization of the unknowns defined on the mesh faces (edges in two dimensions). The piecewise constant degrees of freedom are determined in a global problem over the mesh skeleton. Then, the solution and its gradient are recovered at the cells centroid in a set of element-by-element independent postprocesses, both exhibiting linear convergence. The formulation of the transient advection-diffusion-reaction equation is presented in detail and the numerical analysis under challenging advective/diffusive regimes is studied. Finally, we use several numerical examples to illustrate the advantages and limitations of the FCFV method to solve problems of geoscientific and geotechnical relevance governed by the non-linear coupling between advection-diffusion-reactive transport and Stokes flow. Our results show that the FCFV method is an attractive and highly competitive alternative to other commonly used methods., This work is funded by MCIN/AEI doi:/10.13039/501100011033 through project PID2020-113463RB-C32, by the Generalitat de Catalunya, Spain (Grant number: 2017-SGR-1278) and by EU H2020-MSCA-RISE grant agreement No 777778. MB acknowledges support from a doctoral scholarship by CSIRO., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

An OpenFOAM face-centred solver for incompressible flows robust to mesh distortion

  • Cortellessa, Davide
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Huerta, Antonio|||0000-0003-4198-3798
This work presents an overview of mesh-induced errors commonly experienced by cell-centred finite volumes (CCFV), for which the face-centred finite volume (FCFV) paradigm offers competitive solutions. In particular, a robust FCFV solver for incompressible laminar flows is integrated in OpenFOAM and tested on a set of steady-state and transient benchmarks. The method outperforms standard simpleFoam and pimpleFoam algorithms in terms of optimal convergence, accuracy, stability, and robustness. Special attention is devoted to motivate and numerically demonstrate the ability of the FCFV method to treat non-orthogonal, stretched, and skewed meshes, where CCFV schemes exhibit shortcomings., Generalitat de Catalunya (PhD scholarship of DC; 2021-SGR-01049 to MG and AH; Serra H unter Programme for MG). Spanish Ministry of Science, Innovation and Universities and Spanish State Research Agency MICIU/EI/10.13039/501100011033 (PID2020-113463RB-C33 to MG; PID2020-113463RB-C32 to AH; CEX2018-000797-S to MG and AH)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical modelling of opposing subduction in the Western Mediterranean

  • Peral Millán, Mireia
  • Fernandez Ortiga, Manel
  • Vergés Masip, Jaume
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Jimenez Munt, Ivone
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The geodynamic evolution of the Western Mediterranean related to the closure of the Ligurian-Tethys ocean is not yet fully resolved. We present a new 3D numerical model of double subduction with opposite polarities fostered by the inherited segmentation of the Ligurian-Tethys margins and rifting system between Iberia and NW Africa. The model is constrained by plate kinematic reconstructions and assumes that both Alboran-Tethys and Algerian-Tethys plate segments are separated by a NW-SE transform zone enabling that subduction polarity changes from SE-dipping in the Alboran-Tethys segment to NW-dipping in the Algerian-Tethys segment. The model starts about late Eocene times at 36.5 Ma and the temporal evolution of the simulation is tied to the geological evolution by comparing the rates of convergence and trench retreat, and the onset and end of opening in the Alboran Basin. Curvature of the Alboran-Tethys slab is imposed by the pinning of its western edge when reaching the end of the transform zone in the adjacent west-Africa continental block. The progressive curvature of the trench explains the observed regional stress reorientation changing from N-S to NW-SE and to E-W in the central and western regions of the Alboran Basin. The increase of the retreat rates from the Alboran-Tethys to the Algerian-Tethys slabs is compatible with the west-to-east transition from continental-to-magmatic-to-oceanic crustal nature and with the massive and partially synchronous calc-alkaline and alkaline magmatism., We are indebted to Prof. Zheng-Xiang Li as Editor of Tectonophysics, and Prof. Sierd Cloetingh and an anonymous reviewer for their valuable suggestions and constructive comments which improved the previous version of the paper. We acknowledge discussions with Chiara Mac- chiavelli and Marc Viaplana during the development of this work. This work is funded by the SUBTETIS (PIE-CSIC-201830E039, CSIC), ALORBE (PIE-CSIC-202030E310), GeoCAM (PGC2018-095154-B-I00, Spanish Government), Equinor R&T Fornebu (Norway), and the Gen- eralitat de Catalunya grant (AGAUR 2017 SGR 847). We also thank the computer resources at MareNostrum and the technical support provided by the Barcelona Supercomputing Center (BSC) through several projects (AECT-2019-1-0013 and AECT-2019-2-0005). S. Z. has been funded by the MCIN/AEI doi:10.13039/501100011033 through project PID2020- 113463RB-C32, and by EU H2020 MSCA grant agreement No 777778. This work has been done in the framework of the Unidad Asociada of LACAN-UPC with CSIC and using the facilities of the Laboratory of Geodynamic Modelling from Geo3BCN-CSIC., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An unfitted high-order HDG method for two-fluid Stokes flow with exact NURBS geometries

  • Piccardo, Stefano
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Huerta, Antonio|||0000-0003-4198-3798
A high-order, degree-adaptive hybridizable discontinuous Galerkin (HDG) method is presented for two-fluid incompressible Stokes flows, with boundaries and interfaces described using NURBS. The NURBS curves are embedded in a fixed Cartesian grid, yielding an unfitted HDG scheme capable of treating the exact geometry of the boundaries/interfaces, circumventing the need for fitted, high-order, curved meshes. The framework of the NURBS-enhanced finite element method (NEFEM) is employed for accurate quadrature along immersed NURBS and in elements cut by NURBS curves. A Nitsche's formulation is used to enforce Dirichlet conditions on embedded surfaces, yielding unknowns only on the mesh skeleton as in standard HDG, without introducing any additional degree of freedom on non-matching boundaries/interfaces. The resulting unfitted HDG-NEFEM method combines non-conforming meshes, exact NURBS geometry and high-order approximations to provide high-fidelity results on coarse meshes, independent of the geometric features of the domain. Numerical examples illustrate the optimal accuracy and robustness of the method, even in the presence of badly cut cells or faces, and its suitability to simulate microfluidic systems from CAD geometries., This work was supported by the Spanish Ministry of Science, Innovation and Universities and the Spanish State Research Agency MICIU/AEI/10.13039/501100011033 (PID2020-113463RB-C33 to MG, PID2020-113463RB-C32 to AH, CEX2018-000797-S to MG and AH) and the Generalitat de Catalunya (2021-SGR-01049). MG is Fellow of the Serra Húnter Programme of the Generalitat de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ghost-arc geochemical anomaly at a spreading ridge caused by supersized flat subduction

  • Gianni, Guido M.
  • Likerman, Jeremías
  • Navarrete Granzotto, César Rodrigo
  • Gianni, Conrado R.
  • Zlotnik, Sergio|||0000-0001-9674-8950
The Southern Atlantic-Southwest Indian ridges (SASWIR) host mid-ocean ridge basalts with a residual subduction-related geochemical fingerprint (i.e., a ghost-arc signature) of unclear origin. Here, we show through an analysis of plate kinematic reconstructions and seismic tomography models that the SASWIR subduction-modified mantle source formed in the Jurassic close to the Georgia Islands slab (GI) and remained near-stationary in the mantle reference frame. In this analysis, the GI lies far inboard the Jurassic Patagonian-Antarctic Peninsula active margin. This was formerly attributed to a large-scale flat subduction event in the Late Triassic-Early Jurassic. We propose that during this flat slab stage, the subduction-modified mantle areas beneath the Mesozoic active margin and surrounding sutures zones may have been bulldozed inland by >2280 km. After the demise of the flat slab, this mantle anomaly remained near-stationary and was sampled by the Karoo mantle plume 183 Million years (Myr) ago and again since 55 Myr ago by the SASWIR. We refer to this process as asthenospheric anomaly telescoping. This study provides a hitherto unrecognized geodynamic effect of flat subduction, the viability of which we support through numerical modeling., G. M. G. and C. R. N. recognize the support given by CONICET and the funding given by the Universidad Nacional de la Patagonia San Juan Bosco (Grant number: CIUNPAT no. 1399). S. Z. and J. L. acknowledge the funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 777778. S.Z. acknowledges the funding of Project PID2020-113463RB-C32 funded by MCIN/AEI /10.13039/501100011033 and the funding of Generalitat de Catalunya via the 2021 SGR 01049., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Data augmentation for the POD formulation of the parametric laminar incompressible navier–stokes equations

  • Muixí Ballonga, Alba|||0000-0002-4420-3366
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Díez, Pedro|||0000-0001-6464-6407
A posteriori reduced-order models (ROM), for example, based on proper orthogonal decomposition (POD), are essential to affordably tackle realistic parametric problems. They rely on a trustful training set, that is a family of full-order solutions (snapshots) representative of all possible outcomes of the parametric problem. Having such a rich collection of snapshots is not, in many cases, computationally viable. A strategy for data augmentation, designed for parametric laminar incompressible flows, is proposed to enrich poorly populated training sets. The goal is to include in the new, artificial snapshots emerging features, not present in the original basis, that do enhance the quality of the reduced basis (RB) constructed using POD dimensionality reduction. The methodologies devised are based on exploiting basic physical principles, such as mass and momentum conservation, to construct physically relevant, artificial snapshots at a fraction of the cost of additional full-order solutions. Interestingly, the numerical results show that the ideas exploiting only mass conservation (i.e., incompressibility) are not producing significant added value with respect to the standard linear combinations of snapshots. Conversely, accounting for the linearized momentum balance via the Oseen equation does improve the quality of the resulting approximation and therefore is an effective data augmentation strategy in the framework of viscous incompressible laminar flows. Numerical experiments of parametric flow problems, in two and three dimensions, at low and moderate values of the Reynolds number are presented to showcase the superior performance of the data-enriched POD-RB with respect to the standard ROM in terms of both accuracy and efficiency., This work was supported by the Marie Sklodowska-Curie Actions (Doctoral Network with Grant agreement No. 101120556 to AM, SZ, and PD), the Spanish Ministry of Science, Innovation and Universities and the Spanish State Research Agency MICIU/AEI/10.13039/501100011033 (Grant agreement No. PID2020-113463RB-C32 to SZ; PID2020-113463RB-C33 to AM, MG, and PD; CEX2018-000797-S to SZ, MG, and PD; TED2021-132021B-I00 to MG) and the Generalitat de Catalunya (Grant agreement No. 2021-SGR-01049)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonintrusive parametric solutions in structural dynamics

  • Cavaliere, Fabiola|||0000-0002-4148-7594
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Larráyoz Izcara, Xabier
  • Díez, Pedro|||0000-0001-6464-6407
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A nonintrusive reduced order method able to solve a parametric modal analysis is proposed in this work. The main objective is being able to efficiently identify how a variation of user-defined parameters affects the dynamic response of the structure in terms of fundamental natural frequencies and corresponding mode shapes. A parametric version of the inverse power method (IPM) is presented by using the proper generalised decomposition (PGD) rationale. The proposed approach utilises the socalled encapsulated PGD toolbox and includes a new algorithm for computing the square root of a parametric object. With only one offline computation, the proposed PGD-IPM approach provides an analytical parametric expression of the smallest (in magnitude) eigenvalue (or natural frequency) and corresponding eigenvector (mode shape), which contains all the possible solutions for every combination of the parameters within pre-defined ranges. A Lagrange multiplier deflation technique is introduced in order to compute subsequent eigenpairs, which is also valid to overcome the stiffness matrix singularity in the case of a free-free structure. The proposed approach is nonintrusive and it is therefore possible to be integrated with commercial finite element (FE) packages. Two numerical examples are shown to underline the properties of the technique. The first example includes one material and one geometric parameter. The second example shows a more realistic industrial example, where the nonintrusivity of the approach is demonstrated by employing a commercial FE package for assembling the FE matrices. Finally, a multi-objective optimisation study is performed proving that the developed method could significantly assist the decision-making during the preliminary phase of a new design process., This project is part of the Marie Skłodowska-Curie ITN-EJD ProTechTion funded by the European Union Horizon 2020 research and innovation program with Grant Number 764636. The work of Fabiola Cavaliere, Sergio Zlotnik and Pedro Díez is partially supported by the MCIN/AEI/10.13039/501100011033, Spain (Grant Number: PID2020-113463RB-C32, PID2020-113463RB-C33 and CEX2018-000797-S). Ruben Sevilla also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant Number: EP/P033997/1)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Physics-based manifold learning in scaffolds for tissue engineering: application to inverse problems

  • Muixí Ballonga, Alba|||0000-0002-4420-3366
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • García González, Alberto|||0000-0003-2841-016X
  • Díez, Pedro|||0000-0001-6464-6407
In the field of bone regeneration, insertion of scaffolds favours bone formation by triggering the differentiation of mesenchymal cells into osteoblasts. The presence of Calcium ions (Ca2+) in the interstitial fluid across scaffolds is thought to play a relevant role in the process. In particular, the Ca2+ patterns can be used as an indicator of where to expect bone formation. In this work, we analyse the inverse problem for these distribution patterns, using an advection-diffusion nonlinear model for the concentration of Ca2+. That is, given a set of observables which are related to the amount of expected bone formation, we aim at determining the values of the parameters that best fit the data. The problem is solved in a realistic 3D-printed structured scaffold for two uncertain parameters: the amplitude of the velocity of the interstitial fluid and the ionic release rate from the scaffold. The minimization in the inverse problem requires multiple evaluations of the nonlinear model. The computational cost is alleviated by the combination of standard Proper Orthogonal Decomposition (POD), to reduce the number of degrees of freedom, with an adhoc hyper-reduction strategy, which avoids the assembly of a full-order system at every iteration of the Newton’s method. The proposed hyper-reduction method is formulated using the Principal Component Analysis (PCA) decomposition of suitable training sets, devised from the weak form of the problem. In the numerical tests, the hyper-reduced formulation leads to accurate results with a significant reduction of the computational demands with respect to standard POD., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Benchmarking the face-centred finite volume method for compressible laminar flows

  • Vila Pérez, Jordi|||0000-0003-3164-0863
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Huerta, Antonio|||0000-0003-4198-3798
This work was supported by the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033 (PID2020-113463RB- C33 to M.G., PID2020-113463RB-C32 to A.H., CEX2018-000797-S to A.H. and M.G.). M.G. also acknowledges the support of the Generalitat de Catalunya through the Serra Húnter Programme., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Physically consistent temperature fields for geophysical inversion based on the parametrized location of an isotherm

  • Fernandez, Mariano Tomás|||0000-0001-6054-3881
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Díez, Pedro|||0000-0001-6464-6407
Purpose: This paper aims to provide a method for obtaining physically sound temperature fields to be used in geophysical inversions in the presence of immersed essential conditions. Design/methodology/approach: The method produces a thermal field in agreement with a given location of the interface between the Lithosphere and Asthenosphere. It leverages the known location of the interface to enforce the location of a given isotherm while relaxing other constraints known with less precision. The method splits the domain: in the Lithosphere the solution is immediately obtained by standard procedures, while in the Asthenosphere a minimization problem is solved to fulfill continuity of temperatures (strongly imposed) and fluxes at the interface (weakly imposed). Findings: The numerical methodology, based on the relaxation of the bottom fluxes, correctly recovers the thermal field in the complete domain. To obtain bottom fluxes following geophysical expected values, a constrained minimization strategy is required. The sensitivity of the method could be improved by relaxing other quantities such as lateral fluxes or mantle velocities. Originality/value: A statement of the energy balance problem in terms of a known immersed condition is presented. A novel numerical procedure based on a domain-splitting strategy allows the solution of the problem. The procedure is tailored to be used within geophysical inversions and provides physically sound solutions., The authors acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa Programme for Centres of Excellence in R&D” (CEX2018-000797-S) and the funds of Generalitat de Catalunya through grant SGR 01049. This result is part of the projects I+D+i PID2020-113463RB-C33 and PID2020-113463RB-C32 financed by MCIN/AEI/10.13039/501100011033/., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A multiparametric advection-diffusion reduced-order model for molecular transport in scaffolds for osteoinduction

  • Muixí Ballonga, Alba|||0000-0002-4420-3366
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Calvet Tordera, Pere
  • Español Pons, Montserrat|||0000-0001-7510-0602
  • Lodoso Torrecilla, Irene|||0000-0003-1849-5243
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Díez, Pedro|||0000-0001-6464-6407
  • García González, Alberto|||0000-0003-2841-016X
The version of record is available online at: http://dx.doi.org/10.1007/s10237-022-01577-2, Scaffolds are microporous biocompatible structures that serve as material support for cells to proliferate, differentiate and form functional tissue. In particular, in the field of bone regeneration, insertion of scaffolds in a proper physiological environment is known to favour bone formation by releasing calcium ions, among others, triggering differentiation of mesenchymal cells into osteoblasts. Computational simulation of molecular distributions through scaffolds is a potential tool to study the scaffolds’ performance or optimal designs, to analyse their impact on cell differentiation, and also to move towards reduction in animal experimentation. Unfortunately, the required numerical models are often highly complex and computationally too costly to develop parametric studies. In this context, we propose a computational parametric reduced-order model to obtain the distribution of calcium ions in the interstitial fluid flowing through scaffolds, depending on several physical parameters. We use the well-known Proper Orthogonal Decomposition (POD) with two different variations: local POD and POD with quadratic approximations. Computations are performed using two realistic geometries based on a foamed and a 3D-printed scaffolds. The location of regions with high concentration of calcium in the numerical simulations is in fair agreement with regions of bone formation shown in experimental observations reported in the literature. Besides, reduced-order solutions accurately approximate the reference finite element solutions, with a significant decrease in the number of degrees of freedom, thus avoiding computationally expensive simulations, especially when performing a parametric analysis. The proposed reduced-order model is a competitive tool to assist the design of scaffolds in osteoinduction research., The authors acknowledge the financial support from the Ministerio de Ciencia e Innovación (MCIN/ AEI/10.13039/501100011033) through the grants PID2020-113463RBC32, PID2020-113463RB-C33, CEX2018-000797-S and PID2019-103892RB-I00, and the Generalitat de Catalunya for the Serra Hunter Fellowship of ME and the ICREA Academia Award of MPG., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonlinear dimensionality reduction for parametric problems: a kernel proper orthogonal decomposition

  • Díez, Pedro|||0000-0001-6464-6407
  • Muixí Ballonga, Alba|||0000-0002-4420-3366
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • García González, Alberto|||0000-0003-2841-016X
This is the peer reviewed version of the following article: Diez, P. [et al.]. Nonlinear dimensionality reduction for parametric problems: a kernel proper orthogonal decomposition. "International journal for numerical methods in engineering", 30 Desembre 2021, vol. 122, núm. 24, p. 7306-7327, which has been published in final form at DOI: 10.1002/nme.6831. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Reduced-order models are essential tools to deal with parametric problems in the context of optimization, uncertainty quantification, or control and inverse problems. The set of parametric solutions lies in a low-dimensional manifold (with dimension equal to the number of independent parameters) embedded in a large-dimensional space (dimension equal to the number of degrees of freedom of the full-order discrete model). A posteriori model reduction is based on constructing a basis from a family of snapshots (solutions of the full-order model computed offline), and then use this new basis to solve the subsequent instances online. Proper orthogonal decomposition (POD) reduces the problem into a linear subspace of lower dimension, eliminating redundancies in the family of snapshots. The strategy proposed here is to use a nonlinear dimensionality reduction technique, namely, the kernel principal component analysis (kPCA), in order to find a nonlinear manifold, with an expected much lower dimension, and to solve the problem in this low-dimensional manifold. Guided by this paradigm, the methodology devised here introduces different novel ideas, namely, 1) characterizing the nonlinear manifold using local tangent spaces, where the reduced-order problem is linear and based on the neighboring snapshots, 2) the approximation space is enriched with the cross-products of the snapshots, introducing a quadratic description, 3) the kernel for kPCA is defined ad hoc, based on physical considerations, and 4) the iterations in the reduced-dimensional space are performed using an algorithm based on a Delaunay tessellation of the cloud of snapshots in the reduced space. The resulting computational strategy is performing outstandingly in the numerical tests, alleviating many of the problems associated with POD and improving the numerical accuracy., Generalitat de Catalunya, 2017-SGR-1278; Ministerio de Ciencia e Innovación, CEX2018-000797-S; PID2020-113463RB-C32; PID2020-113463RB-C33, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A hybrid pressure formulation of the face-centred finite volume method for viscous laminar incompressible flows

  • Giacomini, Matteo|||0000-0001-6094-5944
  • Cortellessa, Davide
  • Malikoski Vieira, Luan
  • Sevilla, Rubén
  • Huerta, Antonio|||0000-0003-4198-3798
This work presents a hybrid pressure face-centred finite volume (FCFV) solver to simulate steady-state incompressible Navier-Stokes flows. The method leverages the robustness, in the incompressible limit, of the hybridisable discontinuous Galerkin paradigm for compressible and weakly compressible flows to derive the formulation of a novel, low-order face-based discretization. The incompressibility constraint is enforced in a weak sense by introducing an inter-cell mass flux, defined in terms of a new, hybrid variable that represents the pressure at the cell faces. This results in a new hybridization strategy where cell variables (velocity, pressure, and deviatoric strain rate tensor) are expressed as a function of velocity and pressure at the barycentre of the cell faces. The hybrid pressure formulation provides first-order convergence of all variables, including the stress, without the need for gradient reconstruction, thus being less sensitive to cell type, stretching, distortion, and skewness than traditional low-order finite volume solvers. Numerical benchmarks of Navier-Stokes flows at low and moderate Reynolds numbers, in two and three dimensions, are presented to evaluate the accuracy and robustness of the method. In particular, the hybrid pressure formulation outperforms the FCFV method when convective effects are relevant, achieving accurate predictions on significantly coarser meshes., This work was supported by the H2020 MSCA (ITN-EJD 764636), Generalitat de Catalunya (2021-SGR-01049), Agencia Estatal de Investigación and MICIU/AEI/10.13039/501100011033 (PID2020-113463RB-C33, PID2020-113463RB-C32, CEX2018-000797-S)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A non-oscillatory face-centred finite volume method for compressible flows

  • Vila Pérez, Jordi|||0000-0003-3164-0863
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Sevilla, Rubén
  • Antonio, Huerta
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work presents the face-centred finite volume (FCFV) paradigm for the simulation of compressible flows. The FCFV method defines the unknowns at the face barycentre and uses a hybridisation procedure to eliminate all the degrees of freedom inside the cells. In addition, Riemann solvers are defined implicitly within the expressions of the numerical fluxes. The resulting methodology provides first-order accurate approximations of the conservative quantities, i.e. density, momentum and energy, as well as of the viscous stress tensor and of the heat flux, without the need of any gradient reconstruction procedure. Hence, the FCFV solver preserves the accuracy of the approximation in presence of distorted and highly stretched cells, providing a solver insensitive to mesh quality. In addition, FCFV is capable of constructing non-oscillatory approximations of sharp discontinuities without resorting to shock capturing or limiting techniques. For flows at low Mach number, the method is robust and is capable of computing accurate solutions in the incompressible limit without the need of introducing specific pressure correction strategies. A set of 2D and 3D benchmarks of external flows is presented to validate the methodology in different flow regimes, from inviscid to viscous laminar flows, from transonic to subsonic incompressible flows, demonstrating its potential to handle compressible flows in realistic scenarios., This work was supported by the Spanish Ministry of Economy and Competitiveness, through the María de Maeztu programme for units of excellence in R&D that financed the PhD fellowship of J.V.P. (MDM2014-0445), the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033 (PID2020-113463RB-C33 to M.G., PID2020-113463RB-C32 to A.H., CEX2018-000797-S to A.H. and M.G.), the Generalitat de Catalunya, Spain (2017-SGR-1278 to A.H. and M.G.) and the Engineering and Physical Sciences Research Council, United Kingdom (EP/P033997/1 to R.S.). M.G. also acknowledges the support of the Serra Húnter Programme of the Generalitat de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonintrusive parametric NVH study of a vehicle body structure

  • Cavaliere, Fabiola|||0000-0002-4148-7594
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Sevilla Càrdenas, Ruben
  • Larráyoz Izcara, Xabier
  • Díez, Pedro|||0000-0001-6464-6407
This is an Accepted Manuscript of an article published by Taylor & Francis Group in Mechanics based design of structures and machines on 27/06/22, available online at: http://www.tandfonline.com/10.1080/15397734.2022.2098140, A reduced order model technique is presented to perform the parametric Noise, Vibration and Harshness (NVH) study of a vehicle body-in-white (BIW) structure characterized by material and shape design variables. The ultimate goal is to develop a methodology which allows to efficiently explore the variation in the design space of the BIW static and dynamic global stiffnesses, such that the NVH performance can be evaluated already in the preliminary phase of the development process. The proposed technique is based on the proper generalized decomposition (PGD) method. The obtained PGD solution presents an explicit dependency on the introduced design variables, which allows to obtain solutions in 0.1 milliseconds and therefore opens the door to fast optimization studies and real-time visualizations of the results in a pre-defined range of parameters. The method is nonintrusive, such that an interaction with commercial software is possible. A parametrized finite element (FE) model of the BIW is built by means of the ANSA CAE preprocessor software, which allows to account for material and geometric parameters. A comparison between the parametric NVH solutions and the full-order FE simulations is performed using the MSC-Nastran software, to validate the accuracy of the proposed method. In addition, an optimization study is presented to find the optimal materials and shape properties with respect to the NVH performance. Finally, in order to support the designers in the decision-making process, a graphical interface app is developed which allows to visualize in real-time how changes in the design variables affect pre-defined quantities of interest., This project is part of the Marie Skłodowska-Curie ITN-EJD ProTechTion funded by the European Union Horizon 2020 research and innovation program with Grant Number 764636. The work of Fabiola Cavaliere, Sergio Zlotnik and Pedro D ıez is partially supported by the MCIN/AEI/10.13039/501100011033, Spain (Grant Number: PID2020-113463RB-C32, PID2020-113463RB-C33 and CEX2018-000797-S). Ruben Sevilla also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant Number: EP/T009071/1)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A face-centred finite volume method for laminar and turbulent incompressible flows

  • Vieira, Luan M.
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Sevilla, Rubén
  • Huerta, Antonio|||0000-0003-4198-3798
This work develops, for the first time, a face-centred finite volume (FCFV) solver for the simulation of laminar and turbulent viscous incompressible flows. The formulation relies on the Reynolds-averaged Navier–Stokes (RANS) equations coupled with the negative Spalart–Allmaras (SA) model and three novel convective stabilisations, inspired by Riemann solvers, are derived and compared numerically. The resulting method achieves first-order convergence of the velocity, the velocity-gradient tensor and the pressure. FCFV accurately predicts engineering quantities of interest, such as drag and lift, on unstructured meshes and, by avoiding gradient reconstruction, the method is less sensitive to mesh quality than other FV methods, even in the presence of highly distorted and stretched cells. A monolithic and a staggered solution strategies for the RANS-SA system are derived and compared numerically. Numerical benchmarks, involving laminar and turbulent, steady and transient cases are used to assess the performance, accuracy and robustness of the proposed FCFV method., The authors acknowledge the support of: H2020 MSCA ITN-EJD ProTechTion (Grant No. 764636) that partially funded the PhD scholarship of LMV; Spanish Ministry of Science, Innovation and Universities and Spanish State Research Agency MICIU/AEI/10.13039/501100011 033 (Grants No. PID2020-113463RB-C33 to MG, PID2020-113463RBC32 to AH and CEX2018-000797-S to MG and AH); Generalitat de Catalunya, Spain (Grant No. 2021-SGR-01049 to MG and AH); MG is Fellow of the Serra Húnter Programme of the Generalitat de Catalunya., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An unfitted high-order HDG method for two-fluid Stokes flow with exact NURBS geometries

  • Piccardo, Stefano
  • Giacomini, Matteo
  • Huerta, Antonio
A high-order, degree-adaptive hybridizable discontinuous Galerkin (HDG) method is presented for two-fluid incompressible Stokes flows, with boundaries and interfaces described using NURBS. The NURBS curves are embedded in a fixed Cartesian grid, yielding an unfitted HDG scheme capable of treating the exact geometry of the boundaries/interfaces, circumventing the need for fitted, high-order, curved meshes. The framework of the NURBS-enhanced finite element method (NEFEM) is employed for accurate quadrature along immersed NURBS and in elements cut by NURBS curves. A Nitsche's formulation is used to enforce Dirichlet conditions on embedded surfaces, yielding unknowns only on the mesh skeleton as in standard HDG, without introducing any additional degree of freedom on non-matching boundaries/interfaces. The resulting unfitted HDG-NEFEM method combines non-conforming meshes, exact NURBS geometry and high-order approximations to provide high-fidelity results on coarse meshes, independent of the geometric features of the domain. Numerical examples illustrate the optimal accuracy and robustness of the method, even in the presence of badly cut cells or faces, and its suitability to simulate microfluidic systems from CAD geometries., This work was supported by the Spanish Ministry of Science, Innovation and Universities and the Spanish State Research Agency MICIU/AEI/10.13039/501100011033 (PID2020-113463RB-C33 to MG, PID2020-113463RB-C32 to AH, CEX2018-000797-S to MG and AH) and the Generalitat de Catalunya (2021-SGR-01049). MG is Fellow of the Serra Húnter Programme of the Generalitat de Catalunya., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Physically consistent temperature fields for geophysical inversion based on the parametrized location of an isotherm

  • Fernandez, Mariano Tomás
  • Zlotnik, Sergio
  • Díez, Pedro
Purpose: This paper aims to provide a method for obtaining physically sound temperature fields to be used in geophysical inversions in the presence of immersed essential conditions. Design/methodology/approach: The method produces a thermal field in agreement with a given location of the interface between the Lithosphere and Asthenosphere. It leverages the known location of the interface to enforce the location of a given isotherm while relaxing other constraints known with less precision. The method splits the domain: in the Lithosphere the solution is immediately obtained by standard procedures, while in the Asthenosphere a minimization problem is solved to fulfill continuity of temperatures (strongly imposed) and fluxes at the interface (weakly imposed). Findings: The numerical methodology, based on the relaxation of the bottom fluxes, correctly recovers the thermal field in the complete domain. To obtain bottom fluxes following geophysical expected values, a constrained minimization strategy is required. The sensitivity of the method could be improved by relaxing other quantities such as lateral fluxes or mantle velocities. Originality/value: A statement of the energy balance problem in terms of a known immersed condition is presented. A novel numerical procedure based on a domain-splitting strategy allows the solution of the problem. The procedure is tailored to be used within geophysical inversions and provides physically sound solutions., The authors acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa Programme for Centres of Excellence in R&D” (CEX2018-000797-S) and the funds of Generalitat de Catalunya through grant SGR 01049. This result is part of the projects I+D+i PID2020-113463RB-C33 and PID2020-113463RB-C32 financed by MCIN/AEI/10.13039/501100011033/., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A hybrid pressure formulation of the face-centred finite volume method for viscous laminar incompressible flows

  • Giacomini, Matteo
  • Cortellessa, Davide
  • Malikoski Vieira, Luan
  • Sevilla, Rubén
  • Huerta, Antonio
This work presents a hybrid pressure face-centred finite volume (FCFV) solver to simulate steady-state incompressible Navier-Stokes flows. The method leverages the robustness, in the incompressible limit, of the hybridisable discontinuous Galerkin paradigm for compressible and weakly compressible flows to derive the formulation of a novel, low-order face-based discretization. The incompressibility constraint is enforced in a weak sense by introducing an inter-cell mass flux, defined in terms of a new, hybrid variable that represents the pressure at the cell faces. This results in a new hybridization strategy where cell variables (velocity, pressure, and deviatoric strain rate tensor) are expressed as a function of velocity and pressure at the barycentre of the cell faces. The hybrid pressure formulation provides first-order convergence of all variables, including the stress, without the need for gradient reconstruction, thus being less sensitive to cell type, stretching, distortion, and skewness than traditional low-order finite volume solvers. Numerical benchmarks of Navier-Stokes flows at low and moderate Reynolds numbers, in two and three dimensions, are presented to evaluate the accuracy and robustness of the method. In particular, the hybrid pressure formulation outperforms the FCFV method when convective effects are relevant, achieving accurate predictions on significantly coarser meshes., This work was supported by the H2020 MSCA (ITN-EJD 764636), Generalitat de Catalunya (2021-SGR-01049), Agencia Estatal de Investigación and MICIU/AEI/10.13039/501100011033 (PID2020-113463RB-C33, PID2020-113463RB-C32, CEX2018-000797-S)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical modelling of opposing subduction in the Western Mediterranean

  • Peral Millán, Mireia
  • Fernandez Ortiga, Manel
  • Vergés Masip, Jaume
  • Zlotnik, Sergio
  • Jimenez Munt, Ivone
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The geodynamic evolution of the Western Mediterranean related to the closure of the Ligurian-Tethys ocean is not yet fully resolved. We present a new 3D numerical model of double subduction with opposite polarities fostered by the inherited segmentation of the Ligurian-Tethys margins and rifting system between Iberia and NW Africa. The model is constrained by plate kinematic reconstructions and assumes that both Alboran-Tethys and Algerian-Tethys plate segments are separated by a NW-SE transform zone enabling that subduction polarity changes from SE-dipping in the Alboran-Tethys segment to NW-dipping in the Algerian-Tethys segment. The model starts about late Eocene times at 36.5 Ma and the temporal evolution of the simulation is tied to the geological evolution by comparing the rates of convergence and trench retreat, and the onset and end of opening in the Alboran Basin. Curvature of the Alboran-Tethys slab is imposed by the pinning of its western edge when reaching the end of the transform zone in the adjacent west-Africa continental block. The progressive curvature of the trench explains the observed regional stress reorientation changing from N-S to NW-SE and to E-W in the central and western regions of the Alboran Basin. The increase of the retreat rates from the Alboran-Tethys to the Algerian-Tethys slabs is compatible with the west-to-east transition from continental-to-magmatic-to-oceanic crustal nature and with the massive and partially synchronous calc-alkaline and alkaline magmatism., We are indebted to Prof. Zheng-Xiang Li as Editor of Tectonophysics, and Prof. Sierd Cloetingh and an anonymous reviewer for their valuable suggestions and constructive comments which improved the previous version of the paper. We acknowledge discussions with Chiara Mac- chiavelli and Marc Viaplana during the development of this work. This work is funded by the SUBTETIS (PIE-CSIC-201830E039, CSIC), ALORBE (PIE-CSIC-202030E310), GeoCAM (PGC2018-095154-B-I00, Spanish Government), Equinor R&T Fornebu (Norway), and the Gen- eralitat de Catalunya grant (AGAUR 2017 SGR 847). We also thank the computer resources at MareNostrum and the technical support provided by the Barcelona Supercomputing Center (BSC) through several projects (AECT-2019-1-0013 and AECT-2019-2-0005). S. Z. has been funded by the MCIN/AEI doi:10.13039/501100011033 through project PID2020- 113463RB-C32, and by EU H2020 MSCA grant agreement No 777778. This work has been done in the framework of the Unidad Asociada of LACAN-UPC with CSIC and using the facilities of the Laboratory of Geodynamic Modelling from Geo3BCN-CSIC., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ghost-arc geochemical anomaly at a spreading ridge caused by supersized flat subduction

  • Gianni, Guido M.
  • Likerman, Jeremías
  • Navarrete Granzotto, César Rodrigo
  • Gianni, Conrado R.
  • Zlotnik, Sergio
The Southern Atlantic-Southwest Indian ridges (SASWIR) host mid-ocean ridge basalts with a residual subduction-related geochemical fingerprint (i.e., a ghost-arc signature) of unclear origin. Here, we show through an analysis of plate kinematic reconstructions and seismic tomography models that the SASWIR subduction-modified mantle source formed in the Jurassic close to the Georgia Islands slab (GI) and remained near-stationary in the mantle reference frame. In this analysis, the GI lies far inboard the Jurassic Patagonian-Antarctic Peninsula active margin. This was formerly attributed to a large-scale flat subduction event in the Late Triassic-Early Jurassic. We propose that during this flat slab stage, the subduction-modified mantle areas beneath the Mesozoic active margin and surrounding sutures zones may have been bulldozed inland by >2280 km. After the demise of the flat slab, this mantle anomaly remained near-stationary and was sampled by the Karoo mantle plume 183 Million years (Myr) ago and again since 55 Myr ago by the SASWIR. We refer to this process as asthenospheric anomaly telescoping. This study provides a hitherto unrecognized geodynamic effect of flat subduction, the viability of which we support through numerical modeling., G. M. G. and C. R. N. recognize the support given by CONICET and the funding given by the Universidad Nacional de la Patagonia San Juan Bosco (Grant number: CIUNPAT no. 1399). S. Z. and J. L. acknowledge the funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 777778. S.Z. acknowledges the funding of Project PID2020-113463RB-C32 funded by MCIN/AEI /10.13039/501100011033 and the funding of Generalitat de Catalunya via the 2021 SGR 01049., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A face-centred finite volume approach for coupled transport phenomena and fluid flow

  • Burcet Rodríguez, Martí
  • Oliveira, Beñat
  • Afonso, Juan Carlos
  • Zlotnik, Sergio
© 2024 Elsevier. This manuscript version is made available under the CC BY 4.0 DEED license https://creativecommons.org/licenses/by/4.0/, We present a particular derivation of the face-centred finite volume (FCFV) method and study its performance in non-linear, coupled transport problems commonly encountered in geoscientific and geotechnical applications. The FCFV method is derived from the hybridisable discontinuous Galerkin formulation, using a constant degree of approximation for the discretization of the unknowns defined on the mesh faces (edges in two dimensions). The piecewise constant degrees of freedom are determined in a global problem over the mesh skeleton. Then, the solution and its gradient are recovered at the cells centroid in a set of element-by-element independent postprocesses, both exhibiting linear convergence. The formulation of the transient advection-diffusion-reaction equation is presented in detail and the numerical analysis under challenging advective/diffusive regimes is studied. Finally, we use several numerical examples to illustrate the advantages and limitations of the FCFV method to solve problems of geoscientific and geotechnical relevance governed by the non-linear coupling between advection-diffusion-reactive transport and Stokes flow. Our results show that the FCFV method is an attractive and highly competitive alternative to other commonly used methods., This work is funded by MCIN/AEI doi:/10.13039/501100011033 through project PID2020-113463RB-C32, by the Generalitat de Catalunya, Spain (Grant number: 2017-SGR-1278) and by EU H2020-MSCA-RISE grant agreement No 777778. MB acknowledges support from a doctoral scholarship by CSIRO., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A non-oscillatory face-centred finite volume method for compressible flows

  • Vila Pérez, Jordi
  • Giacomini, Matteo
  • Sevilla, Rubén
  • Antonio, Huerta
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work presents the face-centred finite volume (FCFV) paradigm for the simulation of compressible flows. The FCFV method defines the unknowns at the face barycentre and uses a hybridisation procedure to eliminate all the degrees of freedom inside the cells. In addition, Riemann solvers are defined implicitly within the expressions of the numerical fluxes. The resulting methodology provides first-order accurate approximations of the conservative quantities, i.e. density, momentum and energy, as well as of the viscous stress tensor and of the heat flux, without the need of any gradient reconstruction procedure. Hence, the FCFV solver preserves the accuracy of the approximation in presence of distorted and highly stretched cells, providing a solver insensitive to mesh quality. In addition, FCFV is capable of constructing non-oscillatory approximations of sharp discontinuities without resorting to shock capturing or limiting techniques. For flows at low Mach number, the method is robust and is capable of computing accurate solutions in the incompressible limit without the need of introducing specific pressure correction strategies. A set of 2D and 3D benchmarks of external flows is presented to validate the methodology in different flow regimes, from inviscid to viscous laminar flows, from transonic to subsonic incompressible flows, demonstrating its potential to handle compressible flows in realistic scenarios., This work was supported by the Spanish Ministry of Economy and Competitiveness, through the María de Maeztu programme for units of excellence in R&D that financed the PhD fellowship of J.V.P. (MDM2014-0445), the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033 (PID2020-113463RB-C33 to M.G., PID2020-113463RB-C32 to A.H., CEX2018-000797-S to A.H. and M.G.), the Generalitat de Catalunya, Spain (2017-SGR-1278 to A.H. and M.G.) and the Engineering and Physical Sciences Research Council, United Kingdom (EP/P033997/1 to R.S.). M.G. also acknowledges the support of the Serra Húnter Programme of the Generalitat de Catalunya., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Data augmentation for the POD formulation of the parametric laminar incompressible navier–stokes equations

  • Muixí Ballonga, Alba
  • Zlotnik, Sergio
  • Giacomini, Matteo
  • Díez, Pedro
A posteriori reduced-order models (ROM), for example, based on proper orthogonal decomposition (POD), are essential to affordably tackle realistic parametric problems. They rely on a trustful training set, that is a family of full-order solutions (snapshots) representative of all possible outcomes of the parametric problem. Having such a rich collection of snapshots is not, in many cases, computationally viable. A strategy for data augmentation, designed for parametric laminar incompressible flows, is proposed to enrich poorly populated training sets. The goal is to include in the new, artificial snapshots emerging features, not present in the original basis, that do enhance the quality of the reduced basis (RB) constructed using POD dimensionality reduction. The methodologies devised are based on exploiting basic physical principles, such as mass and momentum conservation, to construct physically relevant, artificial snapshots at a fraction of the cost of additional full-order solutions. Interestingly, the numerical results show that the ideas exploiting only mass conservation (i.e., incompressibility) are not producing significant added value with respect to the standard linear combinations of snapshots. Conversely, accounting for the linearized momentum balance via the Oseen equation does improve the quality of the resulting approximation and therefore is an effective data augmentation strategy in the framework of viscous incompressible laminar flows. Numerical experiments of parametric flow problems, in two and three dimensions, at low and moderate values of the Reynolds number are presented to showcase the superior performance of the data-enriched POD-RB with respect to the standard ROM in terms of both accuracy and efficiency., This work was supported by the Marie Sklodowska-Curie Actions (Doctoral Network with Grant agreement No. 101120556 to AM, SZ, and PD), the Spanish Ministry of Science, Innovation and Universities and the Spanish State Research Agency MICIU/AEI/10.13039/501100011033 (Grant agreement No. PID2020-113463RB-C32 to SZ; PID2020-113463RB-C33 to AM, MG, and PD; CEX2018-000797-S to SZ, MG, and PD; TED2021-132021B-I00 to MG) and the Generalitat de Catalunya (Grant agreement No. 2021-SGR-01049)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Benchmarking the face-centred finite volume method for compressible laminar flows

  • Vila Pérez, Jordi
  • Giacomini, Matteo
  • Huerta, Antonio
This work was supported by the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033 (PID2020-113463RB- C33 to M.G., PID2020-113463RB-C32 to A.H., CEX2018-000797-S to A.H. and M.G.). M.G. also acknowledges the support of the Generalitat de Catalunya through the Serra Húnter Programme., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A face-centred finite volume method for laminar and turbulent incompressible flows

  • Vieira, Luan M.
  • Giacomini, Matteo
  • Sevilla, Rubén
  • Huerta, Antonio
This work develops, for the first time, a face-centred finite volume (FCFV) solver for the simulation of laminar and turbulent viscous incompressible flows. The formulation relies on the Reynolds-averaged Navier–Stokes (RANS) equations coupled with the negative Spalart–Allmaras (SA) model and three novel convective stabilisations, inspired by Riemann solvers, are derived and compared numerically. The resulting method achieves first-order convergence of the velocity, the velocity-gradient tensor and the pressure. FCFV accurately predicts engineering quantities of interest, such as drag and lift, on unstructured meshes and, by avoiding gradient reconstruction, the method is less sensitive to mesh quality than other FV methods, even in the presence of highly distorted and stretched cells. A monolithic and a staggered solution strategies for the RANS-SA system are derived and compared numerically. Numerical benchmarks, involving laminar and turbulent, steady and transient cases are used to assess the performance, accuracy and robustness of the proposed FCFV method., The authors acknowledge the support of: H2020 MSCA ITN-EJD ProTechTion (Grant No. 764636) that partially funded the PhD scholarship of LMV; Spanish Ministry of Science, Innovation and Universities and Spanish State Research Agency MICIU/AEI/10.13039/501100011 033 (Grants No. PID2020-113463RB-C33 to MG, PID2020-113463RBC32 to AH and CEX2018-000797-S to MG and AH); Generalitat de Catalunya, Spain (Grant No. 2021-SGR-01049 to MG and AH); MG is Fellow of the Serra Húnter Programme of the Generalitat de Catalunya., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonintrusive parametric solutions in structural dynamics

  • Cavaliere, Fabiola
  • Zlotnik, Sergio
  • Larráyoz Izcara, Xabier
  • Díez, Pedro
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A nonintrusive reduced order method able to solve a parametric modal analysis is proposed in this work. The main objective is being able to efficiently identify how a variation of user-defined parameters affects the dynamic response of the structure in terms of fundamental natural frequencies and corresponding mode shapes. A parametric version of the inverse power method (IPM) is presented by using the proper generalised decomposition (PGD) rationale. The proposed approach utilises the socalled encapsulated PGD toolbox and includes a new algorithm for computing the square root of a parametric object. With only one offline computation, the proposed PGD-IPM approach provides an analytical parametric expression of the smallest (in magnitude) eigenvalue (or natural frequency) and corresponding eigenvector (mode shape), which contains all the possible solutions for every combination of the parameters within pre-defined ranges. A Lagrange multiplier deflation technique is introduced in order to compute subsequent eigenpairs, which is also valid to overcome the stiffness matrix singularity in the case of a free-free structure. The proposed approach is nonintrusive and it is therefore possible to be integrated with commercial finite element (FE) packages. Two numerical examples are shown to underline the properties of the technique. The first example includes one material and one geometric parameter. The second example shows a more realistic industrial example, where the nonintrusivity of the approach is demonstrated by employing a commercial FE package for assembling the FE matrices. Finally, a multi-objective optimisation study is performed proving that the developed method could significantly assist the decision-making during the preliminary phase of a new design process., This project is part of the Marie Skłodowska-Curie ITN-EJD ProTechTion funded by the European Union Horizon 2020 research and innovation program with Grant Number 764636. The work of Fabiola Cavaliere, Sergio Zlotnik and Pedro Díez is partially supported by the MCIN/AEI/10.13039/501100011033, Spain (Grant Number: PID2020-113463RB-C32, PID2020-113463RB-C33 and CEX2018-000797-S). Ruben Sevilla also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant Number: EP/P033997/1)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonintrusive parametric NVH study of a vehicle body structure

  • Cavaliere, Fabiola
  • Zlotnik, Sergio
  • Sevilla Càrdenas, Ruben
  • Larráyoz Izcara, Xabier
  • Díez, Pedro
This is an Accepted Manuscript of an article published by Taylor & Francis Group in Mechanics based design of structures and machines on 27/06/22, available online at: http://www.tandfonline.com/10.1080/15397734.2022.2098140, A reduced order model technique is presented to perform the parametric Noise, Vibration and Harshness (NVH) study of a vehicle body-in-white (BIW) structure characterized by material and shape design variables. The ultimate goal is to develop a methodology which allows to efficiently explore the variation in the design space of the BIW static and dynamic global stiffnesses, such that the NVH performance can be evaluated already in the preliminary phase of the development process. The proposed technique is based on the proper generalized decomposition (PGD) method. The obtained PGD solution presents an explicit dependency on the introduced design variables, which allows to obtain solutions in 0.1 milliseconds and therefore opens the door to fast optimization studies and real-time visualizations of the results in a pre-defined range of parameters. The method is nonintrusive, such that an interaction with commercial software is possible. A parametrized finite element (FE) model of the BIW is built by means of the ANSA CAE preprocessor software, which allows to account for material and geometric parameters. A comparison between the parametric NVH solutions and the full-order FE simulations is performed using the MSC-Nastran software, to validate the accuracy of the proposed method. In addition, an optimization study is presented to find the optimal materials and shape properties with respect to the NVH performance. Finally, in order to support the designers in the decision-making process, a graphical interface app is developed which allows to visualize in real-time how changes in the design variables affect pre-defined quantities of interest., This project is part of the Marie Skłodowska-Curie ITN-EJD ProTechTion funded by the European Union Horizon 2020 research and innovation program with Grant Number 764636. The work of Fabiola Cavaliere, Sergio Zlotnik and Pedro D ıez is partially supported by the MCIN/AEI/10.13039/501100011033, Spain (Grant Number: PID2020-113463RB-C32, PID2020-113463RB-C33 and CEX2018-000797-S). Ruben Sevilla also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant Number: EP/T009071/1)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

An OpenFOAM face-centred solver for incompressible flows robust to mesh distortion

  • Cortellessa, Davide
  • Giacomini, Matteo
  • Huerta, Antonio
This work presents an overview of mesh-induced errors commonly experienced by cell-centred finite volumes (CCFV), for which the face-centred finite volume (FCFV) paradigm offers competitive solutions. In particular, a robust FCFV solver for incompressible laminar flows is integrated in OpenFOAM and tested on a set of steady-state and transient benchmarks. The method outperforms standard simpleFoam and pimpleFoam algorithms in terms of optimal convergence, accuracy, stability, and robustness. Special attention is devoted to motivate and numerically demonstrate the ability of the FCFV method to treat non-orthogonal, stretched, and skewed meshes, where CCFV schemes exhibit shortcomings., Generalitat de Catalunya (PhD scholarship of DC; 2021-SGR-01049 to MG and AH; Serra H unter Programme for MG). Spanish Ministry of Science, Innovation and Universities and Spanish State Research Agency MICIU/EI/10.13039/501100011033 (PID2020-113463RB-C33 to MG; PID2020-113463RB-C32 to AH; CEX2018-000797-S to MG and AH)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Physics-based manifold learning in scaffolds for tissue engineering: application to inverse problems

  • Muixí Ballonga, Alba
  • Zlotnik, Sergio
  • García González, Alberto
  • Díez, Pedro
In the field of bone regeneration, insertion of scaffolds favours bone formation by triggering the differentiation of mesenchymal cells into osteoblasts. The presence of Calcium ions (Ca2+) in the interstitial fluid across scaffolds is thought to play a relevant role in the process. In particular, the Ca2+ patterns can be used as an indicator of where to expect bone formation. In this work, we analyse the inverse problem for these distribution patterns, using an advection-diffusion nonlinear model for the concentration of Ca2+. That is, given a set of observables which are related to the amount of expected bone formation, we aim at determining the values of the parameters that best fit the data. The problem is solved in a realistic 3D-printed structured scaffold for two uncertain parameters: the amplitude of the velocity of the interstitial fluid and the ionic release rate from the scaffold. The minimization in the inverse problem requires multiple evaluations of the nonlinear model. The computational cost is alleviated by the combination of standard Proper Orthogonal Decomposition (POD), to reduce the number of degrees of freedom, with an adhoc hyper-reduction strategy, which avoids the assembly of a full-order system at every iteration of the Newton’s method. The proposed hyper-reduction method is formulated using the Principal Component Analysis (PCA) decomposition of suitable training sets, devised from the weak form of the problem. In the numerical tests, the hyper-reduced formulation leads to accurate results with a significant reduction of the computational demands with respect to standard POD., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A multiparametric advection-diffusion reduced-order model for molecular transport in scaffolds for osteoinduction

  • Muixí Ballonga, Alba
  • Zlotnik, Sergio
  • Calvet Tordera, Pere
  • Español Pons, Montserrat
  • Lodoso Torrecilla, Irene
  • Ginebra Molins, Maria Pau
  • Díez, Pedro
  • García González, Alberto
The version of record is available online at: http://dx.doi.org/10.1007/s10237-022-01577-2, Scaffolds are microporous biocompatible structures that serve as material support for cells to proliferate, differentiate and form functional tissue. In particular, in the field of bone regeneration, insertion of scaffolds in a proper physiological environment is known to favour bone formation by releasing calcium ions, among others, triggering differentiation of mesenchymal cells into osteoblasts. Computational simulation of molecular distributions through scaffolds is a potential tool to study the scaffolds’ performance or optimal designs, to analyse their impact on cell differentiation, and also to move towards reduction in animal experimentation. Unfortunately, the required numerical models are often highly complex and computationally too costly to develop parametric studies. In this context, we propose a computational parametric reduced-order model to obtain the distribution of calcium ions in the interstitial fluid flowing through scaffolds, depending on several physical parameters. We use the well-known Proper Orthogonal Decomposition (POD) with two different variations: local POD and POD with quadratic approximations. Computations are performed using two realistic geometries based on a foamed and a 3D-printed scaffolds. The location of regions with high concentration of calcium in the numerical simulations is in fair agreement with regions of bone formation shown in experimental observations reported in the literature. Besides, reduced-order solutions accurately approximate the reference finite element solutions, with a significant decrease in the number of degrees of freedom, thus avoiding computationally expensive simulations, especially when performing a parametric analysis. The proposed reduced-order model is a competitive tool to assist the design of scaffolds in osteoinduction research., The authors acknowledge the financial support from the Ministerio de Ciencia e Innovación (MCIN/ AEI/10.13039/501100011033) through the grants PID2020-113463RBC32, PID2020-113463RB-C33, CEX2018-000797-S and PID2019-103892RB-I00, and the Generalitat de Catalunya for the Serra Hunter Fellowship of ME and the ICREA Academia Award of MPG., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonlinear dimensionality reduction for parametric problems: a kernel proper orthogonal decomposition

  • Díez, Pedro
  • Muixí Ballonga, Alba
  • Zlotnik, Sergio
  • García González, Alberto
This is the peer reviewed version of the following article: Diez, P. [et al.]. Nonlinear dimensionality reduction for parametric problems: a kernel proper orthogonal decomposition. "International journal for numerical methods in engineering", 30 Desembre 2021, vol. 122, núm. 24, p. 7306-7327, which has been published in final form at DOI: 10.1002/nme.6831. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Reduced-order models are essential tools to deal with parametric problems in the context of optimization, uncertainty quantification, or control and inverse problems. The set of parametric solutions lies in a low-dimensional manifold (with dimension equal to the number of independent parameters) embedded in a large-dimensional space (dimension equal to the number of degrees of freedom of the full-order discrete model). A posteriori model reduction is based on constructing a basis from a family of snapshots (solutions of the full-order model computed offline), and then use this new basis to solve the subsequent instances online. Proper orthogonal decomposition (POD) reduces the problem into a linear subspace of lower dimension, eliminating redundancies in the family of snapshots. The strategy proposed here is to use a nonlinear dimensionality reduction technique, namely, the kernel principal component analysis (kPCA), in order to find a nonlinear manifold, with an expected much lower dimension, and to solve the problem in this low-dimensional manifold. Guided by this paradigm, the methodology devised here introduces different novel ideas, namely, 1) characterizing the nonlinear manifold using local tangent spaces, where the reduced-order problem is linear and based on the neighboring snapshots, 2) the approximation space is enriched with the cross-products of the snapshots, introducing a quadratic description, 3) the kernel for kPCA is defined ad hoc, based on physical considerations, and 4) the iterations in the reduced-dimensional space are performed using an algorithm based on a Delaunay tessellation of the cloud of snapshots in the reduced space. The resulting computational strategy is performing outstandingly in the numerical tests, alleviating many of the problems associated with POD and improving the numerical accuracy., Generalitat de Catalunya, 2017-SGR-1278; Ministerio de Ciencia e Innovación, CEX2018-000797-S; PID2020-113463RB-C32; PID2020-113463RB-C33, Peer Reviewed, Postprint (published version)