Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanoarchitectonics of Biofunctionalized Hydrogen-Terminated 2D-Germanane Heterostructures as Highly Sensitive Biorecognition Transducers, The Case Study of Cocaine Drug

  • Lei, Yiming|||0000-0002-3435-6924
  • Campos-Lendínez, Ángel|||0000-0002-7672-027X
  • Sala, Xavier|||0000-0002-7779-6313
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Muñoz, Jose|||0000-0001-9529-6980
Hydrogen-terminated 2D-germanane (2D-GeH), as one inorganic 2D material akin to graphene, is attracting widespread interest owing to its predicted (opto)electronic properties. Nonetheless, the chemical reactivity of 2D-GeH requires further exploration to expand its real implementation. Herein, a simple and straightforward bottom-up biofunctionalization approach is reported aiming at providing the bases toward the robust design of 2D-GeH-based biorecognition systems with electrical readout. For this goal, 2D-GeH has been firstly functionalized with gold nanoparticles (Au-NPs) via an organometallic approach, followed by the covalent immobilization of a thiolated single-stranded DNA (ssDNA) aptamer via Au-S bond interactions. After an accurate material characterization, the resulting ssDNA/Au@GeH heterostructure is drop-casted on a fluorine-doped tin oxide (FTO) electrode for impedimetrically monitoring cocaine as a model drug. Interestingly, the aptamer-cocaine interactions hinder the interfacial electron-transfer process of the benchmark [Fe(CN)] redox marker with increasing concentration of the cocaine target, leading to a detection limit as low as 4.9 ± 0.1 aM, the lowest one reported in literature by far. Overall, the ssDNA/Au@GeH electrochemical biosensor exhibits outstanding selectivity, specificity, and reproducibility, demonstrating the potential use of 2D-GeH as an emerging highly sensitive transducer for biosensing applications. The reported method is general and might be simply customized by tailoring the biorecognition component.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Versatile Organometallic Synthesis of 0D/2D Metal@Germanane Nanoarchitectonics for Electrochemical Energy Conversion Applications

  • Lei, Yiming|||0000-0002-3435-6924
  • Sala, Xavier|||0000-0002-7779-6313
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Muñoz, Jose|||0000-0001-9529-6980
Hydrogen-terminated 2D-Germanane (2D-GeH), a germanium-based 2D material akin to graphene, is receiving enormous attention owing to its predicted optoelectronic characteristics. However, experimental research of 2D-GeH is still in an early stage, and therefore its real implementation for task-specific applications will depend on the correct development of suitable chemical functionalization methods. Herein, a general and straightforward organometallic (OM) approach is provided for the robust functionalization of 2D-GeH with different 0D noble metal nanoparticles (M-NPs), resulting in 0D/2D M@GeH nanoarchitectonics. As a proof-of-principle, 0D/2D Pt@GeH and Au@GeH nanoarchitectonics have been successfully synthesized, characterized, and explored as unconventional electrocatalysts for boosting energy conversion reactions. While the hydrogen evolution reaction activity was evaluated for Pt@GeH, the oxygen reduction reaction was interrogated for Au@GeH. Interestingly, the implanted catalytic features of M-NPs yielded to 0D/2D M@GeH nanoarchitectonics with enhanced energy conversion activity comparing to pristine 2D-GeH counterpart. This work proves the suitability of 2D-GeH as unconventional substrates to stabilize nobleM-NPs, and the versatility of the OM approach for the custom design of a new family of 0D/2D M@GeH nanoarchitectonics to expand the implementation of monoelemental 2D materials as promising electrocatalysts in energy conversion field and beyond.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced Gas-Phase pollutant removal using Pt nanoparticle-modified exfoliated carbon nitride photocatalysts under UV and visible light

  • Mateos, Maria Jose
  • Hou, Heting|||0000-0002-7806-1781
  • Rana, Adeem Ghaffar|||0000-0003-4725-2312
  • Lao-Zea, Angela
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Sala, Xavier|||0000-0002-7779-6313
  • Minceva, Mirjana|||0000-0001-9820-7410
  • Suárez, Silvia|||0000-0003-2258-664X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Tasbihi, Minoo|||0000-0001-8623-4323
Platinum nanoparticles (Pt NPs) have been prepared by the organometallic approach on the surface of exfoliated graphitic carbon nitride (exf-g-CN) with different metal loadings. Multi-technique characterization shows a good dispersion of Pt NPs on the surface of exf-g-CN with a narrow size distribution between 1.7-2.2 nm and a BET area of about 120 m2/g. The Pt NPs are mainly composed of platinum metal with a minor contribution of oxidic surface species. The effect of UV-A and Vis light of different wavelengths on the photocatalytic performance is investigated. The as-prepared hybrid materials show excellent photocatalytic activity for the decontamination of air from volatile organic compounds (VOCs, in particular trichloroethylene, C2HCl3) under low power visible light irradiation. The conversion value reaches a maximum close to 85 % at 405 nm Vis light for 0.5 wt.% Pt loading. At this level of Pt content, electron and hole recombination rates are suppressed according to photoluminescence analysis. Photonic efficiencies of around 0.3 % were achieved under Vis light. The optimised material shows high stability from 2,500 min of operation. XPS analysis suggests the crucial role of Pt/Pt2+ and chlorine species detected on used samples in the reaction rate and stability of the material.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Direct Covalent Functionalization of H-Terminated 2D Germanane with Thiolated Molecules, Passivation and Tuning of Optoelectronic Properties

  • Campos-Lendínez, Ángel|||0000-0002-7672-027X
  • Faraudo, Jordi|||0000-0002-6315-4993
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
  • Muñoz, Jose|||0000-0001-9529-6980
Covalent molecular functionalization allows the physicochemical properties of 2D materials to be precisely tuned and modulated on-demand. Nonetheless, research on the molecular functionalization of 2D monoelemental graphene-like materials─known as Xenes─remains scarce, being mainly restricted to a specific type of solid-state chemical reaction based on the topotactic transformation of bulkier Zintl phases. Herein, a robust and general chemical approach is reported for the direct functionalization of commercially available H-terminated 2D germanene (2D-GeH) with thiolated molecules (R-SH) via Ge-S bond formation. While the material characterization data provide direct experimental evidence of the Ge-S chemical bonding, density functional theory (DFT) calculations also predict its existence. Remarkably, the anchored thiolated molecules also favor the passivation of the 2D Xene against air oxidation, enlarging its benefits for real implementation. As a proof-of-principle, a redox-responsive molecular moiety such as 6-(ferrocenyl)hexanethiol (Fc6-SH) has been exploited to induce changes in the optoelectronic properties of the resulting 2D-GeFc6 heterostructure by simply modulating the external bias potential, making it possible to optically and electrically read out a molecular switch on 2D Xene via implanting molecular responsiveness. Remarkably, the ON/OFF ratio has been shown to be dependent on the distance between the redox-responsive Fc moiety and the 2D Xene surface through the alkyl chain length. Overall, the reported a-la-carte molecular engineering approach provides the basis toward the rapid development of stable 2D-GeR derivatives exhibiting molecule-programmable properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

A Review on Photocatalytic Methane Conversion Systems, From Fundamental Mechanisms to the Emerging Role of Ferroelectric Materials

  • Lei, Yiming|||0000-0002-3435-6924
  • Sala, Xavier|||0000-0002-7779-6313
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Muñoz, Jose|||0000-0001-9529-6980
Methane (CH4) conversion is a promising strategy for reducing greenhouse gases, synthesizing high-value-added chemicals, and thus achieving carbon neutralization. However, due to its inertness, CH4 requires high energy input to initiate the conversion process, which always leads to excessive energy consumption and catalyst deactivation. Along these lines, the use of sunlight as energy input has demonstrated enormous potential to help overcome the uphill thermodynamics of methane conversion under mild reaction conditions. Nevertheless, the high recombination rate of photoinduced charge carriers still hampers photocatalytic efficiency. In the past years, ferroelectric photocatalysts have attracted much attention for dealing with sluggish charge separation/transfer dynamics, presenting themselves as excellent materials for enhancing photocatalytic CH4 conversion rates under mild conditions. Consequently, this work reviews and discusses four pivotal photocatalytic CH4 conversion routes, including (i) dry reforming of methane (DRM), (ii) partial oxidation of methane (POM), (iii) non-oxidative coupling of methane (NOCM), and (iv) oxidative coupling of methane (OCM). In particular, special attention has been paid to the recent advances in ferroelectric-assisted photocatalytic CH4 conversion to elucidate the influence of polarized ferroelectrics in the charge transfer mechanisms. Finally, the main challenges in the field are highlighted, also presenting possible strategies to overcome them in order to encourage more in-depth research on ferroelectric-assisted methane conversion in the future.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effect of Nitrogen and Phosphorus Doping of Reduced Graphene Oxide in the Hydrogen Evolution Catalytic Activity of Supported Ru Nanoparticles

  • Mallón Pernia, Laura|||0000-0002-7738-0844
  • Navarro Ruiz, Javier|||0000-0002-3604-9338
  • Cerezo, Christian|||0000-0001-9537-0642
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Rosal Santamaria, Iker del|||0000-0001-6898-4550
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Bofill, Roger|||0000-0002-8888-1871
  • Martínez-Prieto, Luis Miguel|||0000-0002-3401-4967
  • Philippot, Karine|||0000-0002-8965-825X
  • Poteau, Romuald|||0000-0003-4338-174X
  • Sala, Xavier|||0000-0002-7779-6313
Three different cathodic materials for the hydrogen evolution reaction (HER) consisting of Ru nanoparticles (NPs) supported onto a bare and two doped reduced graphene oxides (r-GO) have been studied. Ru NPs have been synthesized in situ by means of the organometallic approach in the presence of each reduced graphene support (bare (rGO), N-doped (NH2-rGO) and P-doped (P-rGO)). (HR)TEM, EDX, EA, ICP-OES, XPS, Raman and NMR techniques have been used to fully characterize the obtained rGO-supported Ru materials. These materials have been deposited onto a glassy carbon rotating disk electrode (GC-RDE) to assess their HER electrocatalytic activity at acidic pH. The results show that all three materials are stable under reductive conditions for at least 12 h, and that the heteroatom-doping of the graphene structure extremely increases the activity of the electrodes, especially for the case of Ru@P-rGO, where the overpotential at -10 mA·cm-2 decreases to only 2 mV. Realistic (based on experimental compositional data) modeling of the three rGO supports combined with DFT computational analysis of the electronic and electrocatalytic properties of the hybrid nanocatalysts allows attributing the observed electrocatalytic performances to a combination of interrelated factors such as the distance of the Ru atoms to the dopped rGO support and the hydride content at the Ru NP surface.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Polyhydroxykanoate-Assisted Photocatalytic TiO2 Films for Hydrogen Production

  • Tasbihi, Minoo|||0000-0001-8623-4323
  • Kwon, Sunil
  • Kim, Bumsoo
  • Brüggemann, Daniel|||0000-0002-3814-2907
  • Hou, Heting|||0000-0002-7806-1781
  • Lu, Jiasheng
  • Amitrano, Raffaele
  • Grimm, Thomas
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Strasser, Peter|||0000-0002-3884-436X
  • Riedel, Sebastian L.|||0000-0003-1373-417X
  • Schwarze, Michael|||0000-0002-5632-603X
The photocatalytic production of hydrogen using biopolymer-immobilized titanium dioxide (TiO2) is an innovative and sustainable approach to renewable energy generation. TiO2, a well-known photocatalyst, benefits from immobilization on biopolymers due to its environmental friendliness, abundance, and biodegradability. In another way, to boost the efficiency of TiO2, its surface properties can be modified by incorporating co-catalysts like platinum (Pt) to improve charge separation. In this work, the surface of commercial TiO2 PC500 was modified with Pt nanoparticles (Pt1%@PC500) and then immobilized on glass surfaces using polyhydroxyalkanoate biopolymer poly(hydroxybutyrate-co-hydroxyhexanoate) (PHBH). The as-prepared immobilized Pt-modified TiO2 photocatalysts were fully characterized using various physicochemical techniques. The photocatalytic activity of the photocatalyst film was investigated for photocatalytic hydrogen production through water reduction using ethanol as a sacrificial donor. The impact of the film preparation conditions, e.g., PHBH concentration, PHBH:catalyst ratio, and temperature, on activity and stability was studied in detail. The application of biopolymer PHBH as a binder provides a green alternative to conventional immobilization methods, and with the application of PHBH, a stable and active photocatalyst film that showed lower activity compared to that of the suspended photocatalyst but good recyclability in six runs was prepared. A long-term photocatalytic hydrogen production experiment was carried out. In 98 h of operation, 12 mmol of hydrogen was produced in three consecutive runs with a PHBH/Pt1%@PC500 film having an area of ∼5.3 cm2. A significantly lower hydrogen productivity was observed after the first run, possibly due to a change in film structure, but thereafter, the productivity remained almost constant for the second and third runs. Hydrogen was the main product in the gas phase (90%), but carbon dioxide (4-5%) and methane (4-5%) were obtained as important byproducts. The byproducts are a consequence of the use of the sacrificial reagent ethanol. The results of the film performance are very promising, with regard to large-scale continuous hydrogen production.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dyadic Ru-based nanomaterials for visible light-driven photocatalytic hydrogen evolution

  • Martí Balaguer, Gerard|||0000-0002-5888-6671
  • Alique, Marc|||0000-0001-8482-5111
  • López, Isidoro|||0000-0002-6014-0078
  • Francàs, Laia|||0000-0001-9171-6247
  • Bofill, Roger|||0000-0002-8888-1871
  • Schott, Oliver|||0000-0003-4780-9037
  • Hanan, Garry S.
  • Lozano Roche, Álvaro|||0000-0002-8970-4375
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Philippot, Karine|||0000-0002-8965-825X
  • Llobet Dalmases, Antoni|||0000-0002-6176-5272
  • Natali, Mirco|||0000-0002-6638-978X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
Visible light-driven water splitting is an appealing strategy to store renewable energy in the chemical bonds of molecular hydrogen. In this regard, the development of photocatalytic architectures where charge transfer and recombination can be controlled represents a key challenge. The surface functionalization of Ru/RuO nanoparticles (NPs) with the [Ru(2,2'-bpy)(qpy)](PF) photosensitizer (PS), yielding PS-NPs "dyadic" hybrid nanomaterials, represents a promising strategy. Four HER photocatalysts with different PS:NPs ratios are synthesized and thoroughly characterized by analytical and spectroscopic techniques. X-ray photoelectron spectroscopy (XPS) reveals the covalent binding of the PS to the NPs surface. Analysis of the photocatalytic performance in aqueous triethanolamine (TEOA) shows that the activation of the nanocatalyst (RuO reduction) and the hydrogen evolution rate improves when the PS loading increases. Under visible-light irradiation, the nanomaterials with higher PS loading show sustained production of hydrogen for at least 80 h. The morphological and compositional evolution of the hybrid nanomaterials under photocatalytic conditions is studied and correlated with hydrogen production rates over time, pointing to a sequential leaching of PS from the nanomaterials surface. Additionally, photophysical experiments allow attaining an insight into the photochemical mechanism, which involves oxidative quenching with a fast electron injection, but also fast back electron transfer.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced electrocatalytic hydrogen evolution with bimetallic Ru/Pt nanoparticles supported on nitrogen-doped reduced graphene oxide

  • Hou, Heting|||0000-0002-7806-1781
  • Cerezo Navarrete, Christian|||0000-0001-9537-0642
  • Fenoll, Didac A.|||0000-0003-1141-8114
  • Kraft, Matilda|||0009-0008-9528-9797
  • Marini, Carlo
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Martínez-Prieto, Luis Miguel|||0000-0002-3401-4967
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
The electrocatalytic hydrogen evolution reaction (HER) has been explored using mono- and bimetallic Pt-Ru nanoparticles (NPs) deposited onto nitrogen-doped reduced graphene oxide (NH2-rGO) in acidic media. In this contribution, monometallic and bimetallic nanoparticles with three different Pt/Ru ratios (1/5, 1/1, and 5/1) have been used, yielding five different materials denoted as PtxRuy@NH2-rGO (x = 0, y = 1; x = 1, y = 0; x = 1, y = 5; x = 1, y = 1; x = 5, y = 1). The materials were characterized using a variety of state-of-the-art techniques, including high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM), energy dispersive X-Ray spectroscopy (EDX) and X-Ray absorption spectroscopy (XAS), enabling the investigation of differences in morphology, coordination environment and oxidation state as a function of the metal composition of the graphene-supported NPs. The materials exhibited HER activity and demonstrated competitive overpotentials close to the thermodynamic limit. The initial catalytic activity of the as-synthesized materials enhances as the Pt/Ru ratio increases. Chronopotentiometry cathodic experiments showed that under reductive conditions the electrocatalytic performance is drastically impacted. Ru-rich materials were activated, whereas Pt-rich materials showed poor stability. Upon applying a reducing potential for 58 h, Pt1Ru5@NH2-rGO reached the best catalytic activity with outstanding overpotentials of η0 = 0 mV and η10 = 3 mV and no signs of deactivation even after 12 additional hours of electrolysis. According to DFT calculations, all nanoparticles present surface sites whose hydrogen adsorption energy is optimal for HER. In agreement with the experimental data, the Pt1Ru5 model shows the highest number of highly active sites, especially those involving Ru centres close to the Pt-Ru interface. Combining in-depth characterization and computational modelling, this work reveals that the synergy between the two metals, structural features, and their affinity for the support are responsible for the observed differences in catalytic activities and stabilities.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Regulating Ni oxidation states through ruthenium incorporation in Ni based catalysts

  • Mallón Pernia, Laura|||0000-0002-7738-0844
  • Peres, Laurent|||0000-0001-6329-3478
  • Rivas, Nicolas|||0000-0003-0805-5543
  • Garzón Manjón, Alba|||0000-0003-2954-1102
  • Scheu, Cristina|||0000-0001-7916-1533
  • Gil-Sepulcre, Marcos|||0000-0002-2839-8108
  • Ruediger, Olaf|||0000-0002-5148-9083
  • DeBeer, Serena|||0000-0002-5196-3400
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Esvan, Jerome|||0000-0002-8032-6443
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Bofill, Roger|||0000-0002-8888-1871
  • Philippot, Karine|||0000-0002-8965-825X
  • Francàs, Laia|||0000-0001-9171-6247
  • Sala, Xavier|||0000-0002-7779-6313
NiFe-based materials are state-of-the-art electrocatalysts for water oxidation at alkaline pH. Several strategies to improve their activity have been reported, amongst which Ru-incorporation has appeared as a suitable approach. In this work, three Ni based nanomaterials have been prepared through organometallic synthesis and surface-decorated with small (sub-nanometric) Ru clusters (Ru(L)@Ni-NW) or large (ca. 8 nm) Ru nanoparticles (Ru(H)@Ni-NW and Ru(HH)@Ni-NW). As model systems, Ru(L)@Ni-NW and Ru(H)@Ni-NW have been thoroughly characterized by a complementary set of advanced techniques, including atom probe tomography, X-ray absorption spectroscopy, X-ray photoelectron spectroscopy and high-angle annular dark-field scanning transmission electron microscopy. Our study reveals that Ru nanoparticles remain unstable under electrocatalytic oxygen evolution reaction (OER) conditions, leaching from the Ni based NW surface. In contrast, sub-nanometric Ru clusters remain stable on the Ni based NWs and modify the Ni oxidation states at the surface sites, outperforming the counterparts that contain no Ru or Ru nanoparticles. The spectroelectrochemical and DFT modelling results suggest the interaction between the Ru sub-nanometric clusters and the Ni sites as the origin of the stabilization of Ni at higher oxidation states, boosting the OER efficiency under both Fe-containing (unpurified electrolyte) and Fe-free (purified electrolyte) conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fine-Tuning HER Activity Through the Interplay Between Nanoparticle Size and Ligand Coordination Mode in Surface-Functionalized Nanocatalysts

  • Lozano Roche, Álvaro|||0000-0002-8970-4375
  • Martí Balaguer, Gerard|||0000-0002-5888-6671
  • López, Isidoro|||0000-0002-6014-0078
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Philippot, Karine|||0000-0002-8965-825X
  • Gil-Sepulcre, Marcos|||0000-0002-2839-8108
  • Rüdiger, Olaf|||0000-0002-5148-9083
  • DeBeer, Serena|||0000-0002-5196-3400
  • Rosal Santamaria, Iker del|||0000-0001-6898-4550
  • Poteau, Romuald|||0000-0003-4338-174X
  • Francàs, Laia|||0000-0001-9171-6247
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
Metallic nanoparticles (NPs) are state-of-the-art catalysts for the hydrogen evolution reaction (HER), and surface functionalization provides a powerful tool to tune both their physical properties and catalytic performance. This work explores the influence of stabilizing ligands on the HER performance of Ru NPs. We report Ru NPs functionalized with controlled amounts of 2,2 '-bipyridine (bpy). The ligand loading has the usual influence on the NP size, as higher bpy concentrations produce smaller NPs. In contrast, the NP size affects the HER activity in a counterintuitive manner: the smallest NPs are the least active, whereas the largest ones achieve catalytic performance comparable to that of commercial Pt/C. Detailed compositional, spectroscopic, and electrochemical characterization, including analysis of bpy coordination via N 1s XPS, enabled the construction of quasi-realistic computational models. DFT calculations combined with the Yang and Saidi electrochemical model reveal that HER activity depends on both NP size and ligand coordination mode. Importantly, we provide direct evidence that sigma- versus pi-coordination of bpy controls the intrinsic HER catalytic activity of distinct Ru sites, as only the DFT-calculated exchange current density of sigma-coordinated sites matches experimental trends. These results establish ligand coordination mode as a decisive descriptor in surface-functionalized nanocatalysts and introduce an additional design principle for developing highly efficient HER electrocatalysts.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ru nanoparticles supported on alginate-derived graphene as hybrid electrodes for the hydrogen evolution reaction

  • Mallón, Laura
  • Romero, Nuria
  • García-Antón, Jordi
  • Bofill, Roger
  • Philippot, Karine
  • Martínez-Prieto, Luis M.
  • Sala, Xavier
  • Cerezo-Navarrete, Christian
  • Puche Panadero, Marta|||0000-0002-9390-5532
[EN] The development of organic-inorganic hybrid materials for redox catalysis is key to access new energy conversion schemes and the sustainable production of dihydrogen. Here, bare and P-doped graphene arising from the pyrolysis of biomass (alginate from marine algae) has been used as a support for the growth and stabilization of ultra-small Ru/RuO2 NPs through organometallic synthesis. P-doped graphene allows obtaining smaller and better dispersed NPs in hybrid electrodes of lower roughness and electroactive surface area. Electrochemical activation of the as-synthesised supported nanoparticles by reduction of the passivating RuO2 layer generates excellent HER electrocatalysts under acidic conditions (eta(10) of 29 mV and 15 mV for the bare and P-doped electrodes, respectively). P doping, identified as surface phosphates by P-31 solid state NMR, induces improvement of all HER benchmarking parameters studied, including overpotential and exchange and specific current densities. All studied materials show excellent long-term stability and selectivity for hydrogen generation with no sign of deactivation after 12 h under turnover conditions and almost quantitative faradaic efficiencies., The authors thank Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC), Universitat Politecnica de Valencia (UPV), and Universitat Autonoma de Barcelona for the facilities. Electron Microscopy Service of the UPV for TEM facilities and J. A. Vidal-Moya (ITQ, CSIC-UPV) for NMR measurements are also thanked. We also gratefully acknowledge Prof. A. Corma for his contribution to this research. C. C.-N. acknowledges Generalitat Valenciana predoctoral fellowship (GVA: ACIF/2019/076) and L. M. the UAB for a PhD grant. This work was financially supported by the MINECO/FEDER project PID2019-104171RB-I00. J. G.-A. acknowledges the Serra Hunter Program. CNRS and Universite de Toulouse-Paul Sabatier are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Nitrogen and Phosphorus Doping of Reduced Graphene Oxide in the Hydrogen Evolution Catalytic Activity of Supported Ru Nanoparticles

  • Mallón, Laura
  • Navarro-Ruiz, Javier
  • Romero, Nuria
  • del Rosal, Iker
  • García-Antón, Jordi
  • Bofill, Roger
  • Martínez-Prieto, Luis Miguel
  • Philippot, Karine
  • Poteau, Romuald
  • Sala, Xavier
  • Cerezo-Navarrete, Christian
[EN] Three different cathodic materials for the hydrogen evolution reaction (HER) consisting of Ru nanoparticles (NPs) supported onto a bare and two doped reduced graphene oxides (r-GO) have been studied. Ru NPs have been synthesized in situ by means of the organometallic approach in the presence of each reduced graphene support (bare (rGO), N-doped (NH2-rGO) and P-doped (P-rGO)). (HR)TEM, EDX, EA, ICP-OES, XPS, Raman and NMR techniques have been used to fully characterize the obtained rGO-supported Ru materials. These materials have been deposited onto a glassy carbon rotating disk electrode (GC-RDE) to assess their HER electrocatalytic activity at acidic pH. The results show that all three materials are stable under reductive conditions for at least 12 h, and that the heteroatom-doping of the graphene structure extremely increases the activity of the electrodes, especially for the case of Ru@P-rGO, where the overpotential at -10 mA<middle dot>cm-2 decreases to only 2 mV. Realistic (based on experimental compositional data) modeling of the three rGO supports combined with DFT computational analysis of the electronic and electrocatalytic properties of the hybrid nanocatalysts allows attributing the observed electrocatalytic performances to a combination of interrelated factors such as the distance of the Ru atoms to the dopped rGO support and the hydride content at the Ru NP surface., X.S. thanks ICREA for the ICREA Academia Prize 2020. X.S. and J.G.-A. thank MINECO/FEDER (PID2019-104171RB-I00), MICINN (PID2023-146787OB-I00), and AGAUR (2023CLIMA 00036). L.M.M.P. also acknowledges the Junta de Andalucia (ProyExcel_00706) for financial support, as well as grants PID2021-126080OA-I00, TED2021-132087A-I00, and CNS2023-145078 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU" and "European Union NextGeneration EU/PRTR". L.M. thanks the UAB for a Ph.D. grant. J.N.R., I.dR. and R.P. thank the CALMIP HCP for generous allocation of computational time (grant P0611). N.R. and K.P. thank CNRS and University of Toulouse 3-Paul Sabatier for financial support.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

‘One-pot’ engineering of 0D carbon-based inorganic nanoarchitectonics for boosting multitasking catalytic activity

  • Gómez Pérez, Inmaculada Jénnifer
  • Hou, Heting
  • Muñoz, Jose
  • Romero, Nuria
  • Sala, Xavier
  • García-Antón, Jordi
[Abstract] Easy-to-make nanostructured materials that exhibit multitasking activity —while reducing the use of hazardous solvents throughout its architectural design— is a must to advance in the so-called Industry 4.0. Herein, a simple and eco-friendly ‘one-pot’ functionalization approach has been devised for synthesizing 0D carbon-based inorganic nanoarchitectonics made of carbon dots (CDs, as core carbon source) carrying two different inorganic building blocks, viz. quantum dots (CdSe@ZnS–QDs) and metal nanoparticles (Pt–NPs). As a proof-of-principle, the multi-catalytic activity of the resulting 0D Pt/QD/CD nanoarchitectonics by means of photoelectrocatalysis and sonocatalysis has been considered and compared with the pristine CD counterpart, demonstrating its suitability for boosting pivotal catalytic tasks like i) the photoelectrogeneration of hydrogen via hydrogen evolution reaction (HER), and ii) the sonodegradation of environmental pollutants (i.e., Rhodamine B) in water. Overall, this chemical approach is general and might be tailored for architecting alternative carbon-based heterostructures to enhance alternative multi-catalytic tasks., H. H. acknowledges the program of China Scholarships Council (No. 201908440337). X.S. thanks ICREA for the ICREA Academia Prize 2020. X.S. and J.G.-A. thank MINECO/FEDER for financial support (PID2019-104171RB-I00). J. M. is indebted to the Ramón y Cajal Program (RYC2021-033820-I Fellowship) funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU/PRTR”. I. J. G. acknowledges the Spanish Ministry of Universities for a Beatriz Galindo (BG22/000147) and Maria Zambrano funding (RSU.UDC.MZ09 [RSU.UDC.MZ11]) transferred by the European Union-Next GenerationEU.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ru nanoparticles supported on alginate-derived graphene as hybrid electrodes for the hydrogen evolution reaction

  • Mallón, Laura
  • Cerezo-Navarrete, Christian
  • Romero, Nuria
  • Puche, Marta
  • García-Antón, Jordi
  • Bofill, Roger
  • Philippot, Karine
  • Martínez-Prieto, Luis Miguel
  • Sala, Xavier
The development of organic-inorganic hybrid materials for redox catalysis is key to access new energy conversion schemes and the sustainable production of dihydrogen. Here, bare and P-doped graphene arising from the pyrolysis of biomass (alginate from marine algae) has been used as a support for the growth and stabilization of ultra-small Ru/RuONPs through organometallic synthesis. P-doped graphene allows obtaining smaller and better dispersed NPs in hybrid electrodes of lower roughness and electroactive surface area. Electrochemical activation of the as-synthesised supported nanoparticles by reduction of the passivating RuOlayer generates excellent HER electrocatalysts under acidic conditions (ηof 29 mV and 15 mV for the bare and P-doped electrodes, respectively). P doping, identified as surface phosphates byP solid state NMR, induces improvement of all HER benchmarking parameters studied, including overpotential and exchange and specific current densities. All studied materials show excellent long-term stability and selectivity for hydrogen generation with no sign of deactivation after 12 h under turnover conditions and almost quantitative faradaic efficiencies., The authors thank Instituto de Tecnología Química (ITQ), Consejo Superior de Investigaciones Científicas (CSIC), Universitat Politècnica de València (UPV), and Universitat Autonoma de Barcelona for the facilities. Electron Microscopy Service of the UPV for TEM facilities and J. A. Vidal-Moya (ITQ, CSIC-UPV) for NMR measurements are also thanked. We also gratefully acknowledge Prof. A. Corma for his contribution to this research. C. C.-N. acknowledges Generalitat Valenciana predoctoral fellowship (GVA: ACIF/2019/076) and L. M. the UAB for a PhD grant. This work was financially supported by the MINECO/FEDER project PID2019-104171RB-I00. J. G.-A. acknowledges the Serra Húnter Program. CNRS and Université de Toulouse-Paul Sabatier are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Covalent Functionalization of H-Terminated 2D Germanane with Thiolated Molecules: Passivation and Tuning of Optoelectronic Properties

  • Campos Lendínez, Ángel
  • Faraudo, Jordi
  • García Antón, Jordi
  • Sala, Xavier
  • Muñoz, Jose
Covalent molecular functionalization allows the physicochemical properties of 2D materials to be precisely tuned and modulated on-demand. Nonetheless, research on the molecular functionalization of 2D monoelemental graphene-like materials─known as Xenes─remains scarce, being mainly restricted to a specific type of solid-state chemical reaction based on the topotactic transformation of bulkier Zintl phases. Herein, a robust and general chemical approach is reported for the direct functionalization of commercially available H-terminated 2D germanene (2D-GeH) with thiolated molecules (R-SH) via Ge-S bond formation. While the material characterization data provide direct experimental evidence of the Ge-S chemical bonding, density functional theory (DFT) calculations also predict its existence. Remarkably, the anchored thiolated molecules also favor the passivation of the 2D Xene against air oxidation, enlarging its benefits for real implementation. As a proof-of-principle, a redox-responsive molecular moiety such as 6-(ferrocenyl)hexanethiol (Fc6-SH) has been exploited to induce changes in the optoelectronic properties of the resulting 2D-GeFc6 heterostructure by simply modulating the external bias potential, making it possible to optically and electrically read out a molecular switch on 2D Xene via implanting molecular responsiveness. Remarkably, the ON/OFF ratio has been shown to be dependent on the distance between the redox-responsive Fc moiety and the 2D Xene surface through the alkyl chain length. Overall, the reported a-la-carte molecular engineering approach provides the basis toward the rapid development of stable 2D-GeR derivatives exhibiting molecule-programmable properties., X.S. thanks ICREA for the ICREA Academia Prize 2020. X.S. and J.G.-A. thank MINECO/FEDER for financial support (PID2019-104171RB-I00). J.M. is indebted to the Ramón y Cajal Program (RYC2021-033820-I Fellowship) funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU/PRTR”. J.F. acknowledges the “Severo Ochoa” Award for Centres of Excellence in R&D (CEX2019-000917-S) awarded to ICMAB and the Government of Catalonia (AGAUR) for grant 2021SGR01519. We thank CESGA Supercomputing Center for technical support and computer time at the supercomputer FinisTerrae III., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Nitrogen and Phosphorus Doping of Reduced Graphene Oxide in the Hydrogen Evolution Catalytic Activity of Supported Ru Nanoparticles

  • Mallón, Laura
  • Navarro Ruiz, Javier
  • Cerezo-Navarrete, Christian
  • Romero, Nuria
  • Del Rosal, Iker
  • García-Antón, Jordi
  • Bofill, Roger
  • Martínez Prieto, Luis M
  • Philippot, Karine
  • Poteau, Romuald
  • Sala, Xavier
Chemicals and CAS Registry Numbers carbon 7440-44-0 nitrogen 7727-37-9 phosphorus 7723-14-0, Three different cathodic materials for the hydrogen evolution reaction (HER) consisting of Ru nanoparticles (NPs) supported onto a bare and two doped reduced graphene oxides (r-GO) have been studied. Ru NPs have been synthesized in situ by means of the organometallic approach in the presence of each reduced graphene support (bare (rGO), N-doped (NH2-rGO) and P-doped (P-rGO)). (HR)TEM, EDX, EA, ICP-OES, XPS, Raman and NMR techniques have been used to fully characterize the obtained rGO-supported Ru materials. These materials have been deposited onto a glassy carbon rotating disk electrode (GC-RDE) to assess their HER electrocatalytic activity at acidic pH. The results show that all three materials are stable under reductive conditions for at least 12 h, and that the heteroatom-doping of the graphene structure extremely increases the activity of the electrodes, especially for the case of Ru@P-rGO, where the overpotential at -10 mA·cm-2 decreases to only 2 mV. Realistic (based on experimental compositional data) modeling of the three rGO supports combined with DFT computational analysis of the electronic and electrocatalytic properties of the hybrid nanocatalysts allows attributing the observed electrocatalytic performances to a combination of interrelated factors such as the distance of the Ru atoms to the dopped rGO support and the hydride content at the Ru NP surface., X.S. thanks ICREA for the ICREA Academia Prize 2020. X.S. and J.G.-A. thank MINECO/FEDER (PID2019-104171RB-I00), MICINN (PID2023-146787OB-I00), and AGAUR (2023CLIMA 00036). L.M.M.P. also acknowledges the Junta de Andalucía (ProyExcel_00706) for financial support, as well as grants PID2021-126080OA-I00, TED2021-132087A-I00, and CNS2023-145078 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU” and “European Union NextGeneration EU/PRTR”. L.M. thanks the UAB for a Ph.D. grant. J.N.R., I.dR. and R.P. thank the CALMIP HCP for generous allocation of computational time (grant P0611). N.R. and K.P. thank CNRS and University of Toulouse 3–Paul Sabatier for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced electrocatalytic hydrogen evolution with bimetallic Ru/Pt nanoparticles supported on nitrogen-doped reduced graphene oxide

  • Hou, Heting
  • Cerezo-Navarrete, Christian
  • Fenoll, Dídac A.
  • Kraft, Matilda
  • Marini, Carlo
  • Rodríguez-Santiago, Luis
  • Solans-Monfort, Xavier
  • Martínez-Prieto, Luis M.
  • Romero, Nuria
  • García-Antón, Jordi
  • Sala, Xavier
The electrocatalytic hydrogen evolution reaction (HER) has been explored using mono- and bimetallic Pt-Ru nanoparticles (NPs) deposited onto nitrogen-doped reduced graphene oxide (NH<inf>2</inf>-rGO) in acidic media. In this contribution, monometallic and bimetallic nanoparticles with three different Pt/Ru ratios (1/5, 1/1, and 5/1) have been used, yielding five different materials denoted as Pt<inf>x</inf>Ru<inf>y</inf>@NH<inf>2</inf>-rGO (x = 0, y = 1; x = 1, y = 0; x = 1, y = 5; x = 1, y = 1; x = 5, y = 1). The materials were characterized using a variety of state-of-the-art techniques, including high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM), energy dispersive X-Ray spectroscopy (EDX) and X-Ray absorption spectroscopy (XAS), enabling the investigation of differences in morphology, coordination environment and oxidation state as a function of the metal composition of the graphene-supported NPs. The materials exhibited HER activity and demonstrated competitive overpotentials close to the thermodynamic limit. The initial catalytic activity of the as-synthesized materials enhances as the Pt/Ru ratio increases. Chronopotentiometry cathodic experiments showed that under reductive conditions the electrocatalytic performance is drastically impacted. Ru-rich materials were activated, whereas Pt-rich materials showed poor stability. Upon applying a reducing potential for 58 h, Pt<inf>1</inf>Ru<inf>5</inf>@NH<inf>2</inf>-rGO reached the best catalytic activity with outstanding overpotentials of η<inf>0</inf> = 0 mV and η<inf>10</inf> = 3 mV and no signs of deactivation even after 12 additional hours of electrolysis. According to DFT calculations, all nanoparticles present surface sites whose hydrogen adsorption energy is optimal for HER. In agreement with the experimental data, the Pt<inf>1</inf>Ru<inf>5</inf> model shows the highest number of highly active sites, especially those involving Ru centres close to the Pt-Ru interface. Combining in-depth characterization and computational modelling, this work reveals that the synergy between the two metals, structural features, and their affinity for the support are responsible for the observed differences in catalytic activities and stabilities., X. S. thanks ICREA for the ICREA Academia Prize 2020. X. S. and J. G.-A. thank MINECO/FEDER (PID2019-104171RB-I00) and MICINN (PID2023-146787OB-I00) for financial support. L. M. M. P. also acknowledges the Junta de Andalucía (ProyExcel_00706) for financial support, as well as Grants PID2021-126080OA-I00, TED2021-132087A-I00 and CNS2023-145078 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU” and “European Union NextGenerationEU/PRTR. L. R.-S. and X. S.-M. acknowledge financial support from MICINN (PID2023-151738NB-I00). X-Ray Absoprtion experiments were performed at CLAESS beamline (experiment 2020084432) with the collaboration of ALBA staff. H. H. acknowledge the China Scholarships Council (No.201908440337) for her PhD grant., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Light-driven hydrogen evolution assisted by covalent organic frameworks

  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Bofill, Roger|||0000-0002-8888-1871
  • Francàs, Laia|||0000-0001-9171-6247
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
Covalent organic frameworks (COFs) are crystalline porous organic polymers built from covalent organic blocks that can be photochemically active when incorporating organic semiconducting units, such as triazine rings or diacetylene bridges. The bandgap, charge separation capacity, porosity, wettability, and chemical stability of COFs can be tuned by properly choosing their constitutive building blocks, by extension of conjugation, by adjustment of the size and crystallinity of the pores, and by synthetic post-functionalization. This review focuses on the recent uses of COFs as photoactive platforms for the hydrogen evolution reaction (HER), in which usually metal nanoparticles (NPs) or metallic compounds (generally Pt-based) act as co-catalysts. The most promising COF-based photocatalytic HER systems will be discussed, and special emphasis will be placed on rationalizing their structure and light-harvesting properties in relation to their catalytic activity and stability under turnover conditions. Finally, the aspects that need to be improved in the coming years will be discussed, such as the degree of dispersibility in water, the global photocatalytic efficiency, and the robustness and stability of the hybrid systems, putting emphasis on both the COF and the metal co-catalyst.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Consecutive Ligand-Based Electron Transfer in New Molecular Copper-Based Water Oxidation Catalysts

  • Gil-Sepulcre, Marcos|||0000-0002-2839-8108
  • Garrido Barros, Pablo|||0000-0002-1489-3386
  • Oldengott, Jan
  • Funes-Ardoiz, Ignacio|||0000-0002-5843-9660
  • Bofill, Roger|||0000-0002-8888-1871
  • Sala, Xavier|||0000-0002-7779-6313
  • Benet-Buchholz, Jordi|||0000-0003-3984-3550
  • Llobet Dalmases, Antoni|||0000-0002-6176-5272
Water oxidation to dioxygen is one of the key reactions that need to be mastered for the design of practical devices based on water splitting with sunlight. In this context, water oxidation catalysts based on first-row transition metal complexes are highly desirable due to their low cost and their synthetic versatility and tunability through rational ligand design. A new family of dianionic bpy-amidate ligands of general formula HLN n - (LN is [2,2'-bipyridine]-6,6'-dicarboxamide) substituted with phenyl or naphthyl redox non-innocent moieties is described. A detailed electrochemical analysis of [(L4)Cu] 2- (L4=4,4'-(([2,2'-bipyridine]-6,6'-dicarbonyl)bis(azanediyl))dibenzenesulfonate) at pH 11.6 shows the presence of a large electrocatalytic wave for water oxidation catalysis at an η=830 mV. Combined experimental and computational evidence, support an all ligand-based process with redox events taking place at the aryl-amide groups and at the hydroxido ligands. A family of Cu-based complexes bearing dianionic bpy-amidate ligands have been prepared and characterized by spectroscopic and electrochemical techniques. The new complexes are capable of performing water oxidation catalysis at overpotentials between 557-830 mV pH 11.6. A detailed electrocatalytic study in combination with computational calculations revealed the all ligand-based nature of the electron transfer processes involved in the catalytic cycle.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unravelling the Mechanistic Pathway of the Hydrogen Evolution Reaction Driven by a Cobalt Catalyst

  • Jiang, Bing|||0000-0001-9833-6079
  • Gil-Sepulcre, Marcos|||0000-0002-2839-8108
  • Garrido Barros, Pablo|||0000-0002-1489-3386
  • Gimbert-Suriñach, Carolina|||0000-0002-4412-7607
  • Wang, Jia-Wei|||0000-0003-1966-7131
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Nolis, Pau|||0000-0003-2360-1709
  • Benet-Buchholz, Jordi|||0000-0003-3984-3550
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Sala, Xavier|||0000-0002-7779-6313
  • Llobet Dalmases, Antoni|||0000-0002-6176-5272
A cobalt complex bearing a κ-NP ligand is presented (1 or Co(L), where L is (1E,1'E)-1,1'-(pyridine-2,6-diyl)bis(N-(3-(diphenylphosphanyl)propyl)ethan-1-imine). Complex 1 is stable under air at oxidation state Co thanks to the π-acceptor character of the phosphine groups. Electrochemical behavior of 1 reveals a two-electron Co/Co oxidation process and an additional one-electron reduction, which leads to an enhancement in the current due to hydrogen evolution reaction (HER) at E=-1.6 V vs Fc/Fc. In the presence of 1 equiv of bis(trifluoromethane)sulfonimide, 1 forms the cobalt hydride derivative Co(L)-H (2), which has been fully characterized. Further addition of 1 equiv of CoCp* (Cp* is pentamethylcyclopentadienyl) affords the reduced Co(L)-H (2) species, which rapidly forms hydrogen and regenerates the initial Co(L) (1). The spectroscopic characterization of catalytic intermediates together with DFT calculations support an unusual bimolecular homolytic mechanism in the catalytic HER with 1.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of cocatalysts (Ni, Co, and Cu) and synthesis method on the photocatalytic activity of exfoliated graphitic carbon nitride for hydrogen production

  • Rana, Adeem Ghaffar|||0000-0003-4725-2312
  • Schwarze, Michael|||0000-0002-5632-603X
  • Tasbihi, Minoo|||0000-0001-8623-4323
  • Sala, Xavier|||0000-0002-7779-6313
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Minceva, Mirjana|||0000-0001-9820-7410
Exfoliated graphitic carbon nitride (ex-g-CN) was synthesized and loaded with non-noble metals (Ni, Cu, and Co). The synthesized catalysts were tested for hydrogen production using a 300-W Xe lamp equipped with a 395 nm cutoff filter. A noncommercial double-walled quartz-glass reactor irradiated from the side was used with a 1 g/L catalyst in 20 mL of a 10 vol% triethanolamine aqueous solution. For preliminary screening, the metal-loaded ex-g-CN was synthesized using the incipient wetness impregnation method. The highest hydrogen production was observed on the Ni-loaded ex-g-CN, which was selected to assess the impact of the synthesis method on hydrogen production. Ni-loaded ex-g-CN was synthesized using different synthesis methods: incipient wetness impregnation, colloidal deposition, and precipitation deposition. The catalysts were characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, nitrogen adsorption using the Brunauer-Emmett-Teller method, and transmission electron microscopy. The Ni-loaded ex-g-CN synthesized using the colloidal method performed best with a hydrogen production rate of 43.6 µmol h-1 g-1. By contrast, the catalysts synthesized using the impregnation and precipitation methods were less active, with 28.2 and 10.1 µmol h-1 g-1, respectively. The hydrogen production performance of the suspended catalyst (440 µmol m-2 g-1) showed to be superior to that of the corresponding immobilized catalyst (236 µmol m-2 g-1).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Boosting the oxygen evolution activity of FeNi oxides/hydroxides by molecular and atomic engineering

  • Da Silva, Eliana S.|||0000-0003-1155-9961
  • Francàs, Laia|||0000-0001-9171-6247
  • Macili, Aureliano|||0000-0001-7930-1380
  • Bofill, Roger|||0000-0002-8888-1871
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
FeNi oxides/hydroxides are the best performing catalysts for oxidizing water at basic pH. Consequently, their improvement is the cornerstone to develop more efficient artificial photosynthetic systems. During the last 5 years different reports have demonstrated an enhancement of their activity by engineering their structures via: (1) modulation of the number of oxygen, iron and nickel vacancies;(2) single atoms (SAs) doping with metals such as Au, Ir, Ru and Pt; and (3) modification of their surface using organic ligands. All these strategies have led to more active and stable electrocatalysts for oxygen evolution rection (OER). In this Concept we critically analyze these strategies using the most relevant examples.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Insights into the light-driven hydrogen evolution reaction of mesoporous graphitic carbon nitride decorated with Pt or Ru nanoparticles

  • Alvarez Prada, Luis Ignacio
  • Nguyen, Anh Dung
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Hou, Heting|||0000-0002-7806-1781
  • Benazzi, Elisabetta
  • Escriche, Lluís|||0000-0003-2562-5034
  • Acharjya, Amitava
  • Thomas, Arne
  • Schwarze, Michael|||0000-0002-5632-603X
  • Schomäcker, Reinhard
  • Sala, Xavier|||0000-0002-7779-6313
  • Natali, Mirco|||0000-0002-6638-978X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Tasbihi, Minoo|||0000-0001-8623-4323
Ru or Pt nanoparticles have been prepared following the organometallic approach and deposited onto the surface of mesoporous graphitic carbon nitride (mpg-CN). Three different Ru-based samples have also been compared to investigate the effect of 4-phenylpyridine as a stabilizing agent. The photocatalytic performance towards the hydrogen evolution reaction (HER) has been tested showing that all hybrid systems clearly outperform the photocatalytic activity of bare mpg-CN. In particular, Pt-decorated mpg-CN yields the largest H2 production upon visible-light irradiation (870 μmol h-1 g-1, TOF = 14.1 h-1, TON = 339 after 24 h) when compared with the Ru-based samples (137-155 μmol h-1 g-1, TOFs between 2.3-2.7 h-1, TONs between 54-57 after 24 h). Long-term photochemical tests (up to 65 h irradiation) show also an improved stability of the Pt-based samples over the Ru counterpart. Photophysical experiments aimed at rationalizing the photocatalytic performance of the different hybrid systems elucidate that the enhanced activity of the Pt-decorated mpg-CN over the Ru-based analogues arises from improved electron transfer kinetics from mpg-CN to the metal nanoparticles.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ruthenium nanoparticles supported on carbon-based nanoallotropes as co-catalyst to enhance the photocatalytic hydrogen evolution activity of carbon nitride

  • Alvarez Prada, Luis Ignacio
  • Peral, Daniel|||0000-0003-4550-6809
  • Song, Mary
  • Muñoz, Jose|||0000-0001-9529-6980
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Escriche, Lluís|||0000-0003-2562-5034
  • Acharjya, Amitava
  • Thomas, Arne
  • Schomäcker, Reinhard
  • Schwarze, Michael|||0000-0002-5632-603X
  • Sala, Xavier|||0000-0002-7779-6313
  • Tasbihi, Minoo|||0000-0001-8623-4323
  • García-Antón, Jordi|||0000-0002-2401-0401
Development of competent and cost-effective materials for hydrogen evolution reaction (HER) has been attracting great attention since hydrogen is hailed as a promising environmentally friendly energy source to reduce the greenhouse emissions. Herein, Ru(0) nanoparticles (RuNPs) have been stabilized onto the surface of four different conducting carbon nanomaterials (CNMs) from 0D to 3D, such as 0D carbon nanohorns (CNH), 1D single-walled carbon nanotubes (CNTs), 2D reduced graphene oxide (rGO) and 3D graphite (GP), for their use in the photocatalytic HER. For this aim, the resulting RuNP@CNMs where physically mixed with mesoporous graphitic carbon nitride (mpg-CN) in an optimum composition ratio to maximize the photocatalytic HER activity. Notably, the resulting four hybrid RuNPs@CNM/mpg-CN materials showed an outstanding increase in the hydrogen evolution reaction (HER) when compared with the pristine mesoporous graphitic carbon nitride without co-catalyst. A comparison on the photocatalytic activity of the four hybrid RuNPs@CNMs physically mixed with mpg-CN and a deep study on the fate of the nanohybrids after catalysis are presented.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A molecular approach to the synthesis of platinum-decorated mesoporous graphitic carbon nitride as selective CO2reduction photocatalyst

  • Tasbihi, Minoo|||0000-0001-8623-4323
  • Fresno, Fernando|||0000-0001-6622-6721
  • Alvarez Prada, Luis Ignacio
  • Acharjya, Amitava
  • Thomas, Arne
  • Escriche, Lluís|||0000-0003-2562-5034
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Sala, Xavier|||0000-0002-7779-6313
  • de la Peña O'Shea, Victor|||0000-0001-5762-4787
  • García-Antón, Jordi|||0000-0002-2401-0401
Platinum nanoparticles (Pt-NPs) have been directly synthesized through the organometallic approach onto the surface of mesoporous graphitic carbon nitride (mpg-CN) semiconductor with two different metal loadings. Thorough multi-technique characterization reveals a very good dispersion of nanoparticles with a narrow size distribution centered at ca. 2.5 nm, regardless of the metal loading, and composed primarily of platinum metal with a minor contribution of oxidic surface species. Compared to bare mpg-CN, the Pt-NPs decorated materials show improved charge separation properties upon band gap excitation, ascribed to electron extraction by Pt-NPs from the conduction band of mpg-CN, as demonstrated by time-resolved fluorescence measurements. The so-obtained materials show photocatalytic activity for CO2 reduction under both UV and visible light irradiation, with improved selectivity towards highly reduced products such as methanol and methane with respect to the bare semiconductor, which leads to the formation of carbon monoxide as the main product. The obtained results shed light on the pathways that determine selectivity in photocatalytic CO2 conversion, contributing to the development of selective photocatalysts, which is one of the cornerstones in this promising technology for direct solar-to-chemical energy conversion.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Surface-Functionalized Nanoparticles as Catalysts for Artificial Photosynthesis

  • Martí Balaguer, Gerard|||0000-0002-5888-6671
  • Mallón Pernia, Laura|||0000-0002-7738-0844
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Francàs, Laia|||0000-0001-9171-6247
  • Bofill, Roger|||0000-0002-8888-1871
  • Philippot, Karine|||0000-0002-8965-825X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
Analogously to enzymatic catalysis, where the active metal sites and their environment are controlled by protein residues, the catalytic properties of metal nanoparticles (NPs) can be tuned by carefully selecting their surface-coordinated species. In artificial photosynthesis, surface-functionalization emerged in the last decade, grounded on the development of reliable methods for tailored synthesis, advanced characterization and theoretical modeling of metal NPs, altogether with the aim of transferring to the nanoscale the mechanistic knowledge acquired from molecular complexes. Metal NPs surface-functionalization modulates the energetics of key catalytic intermediates, introduces second coordination sphere effects, influences the catalyst-electrolyte interface, and determines the metal NPs surface coverage and, accordingly, the number of accessible active sites. In photoactivated systems, metal NPs surface-functionalization may play a key role in modulating the charge transfers and recombination processes between the light absorber and the active sites and in the light absorber itself. Thus, after a presentation of the most relevant synthetic methods to produce well-defined surface-functionalized metal NPs, a critical analysis of why the above effects are the cornerstone in enhancing their catalytic performance in the key processes of artificial photosynthesis, namely the oxygen evolution reaction, the hydrogen evolution reaction, and the CO2 reduction reaction, is given.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ru-based nanoparticles supported on carbon nanotubes for electrocatalytic hydrogen evolution, structural and electronic effects

  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Fenoll, Didac A.|||0000-0003-1141-8114
  • Gil Jiménez, Laia|||0000-0003-0870-4064
  • Campos, Sergi
  • Creus, Jordi|||0000-0001-5555-8122
  • Martí Balaguer, Gerard|||0000-0002-5888-6671
  • Heras-Domingo, Javier|||0000-0002-4322-3146
  • Collière, Vincent
  • Mesa, Camilo A.|||0000-0002-8450-2563
  • Giménez, Sixto|||0000-0002-4522-3174
  • Francàs, Laia|||0000-0001-9171-6247
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Bofill, Roger|||0000-0002-8888-1871
  • Philippot, Karine|||0000-0002-8965-825X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
The performance of Ru-based nanoparticles (NPs) in the hydrogen evolution reaction (HER) relies on both their structural properties and the oxidation state of the metal. Herein, the versatility of the organometallic approach for the synthesis of metal-based nanostructures is combined with thermal oxidation treatments to prepare carbon-nanotube (CNT)-supported Ru-containing nanomaterials for their use as electrocatalysts after dropcasting onto a glassy carbon rotating disk electrode. This strategy allowed access to a series of hybrid nanomaterials of different Ru/RuO2 compositions and different structural order. Linear sweep voltammetry experiments show that the relative disposition of the Ru/RuO2 phases, their interconversion under reductive turnover conditions and the degree of structural order affect the HER electrocatalytic performance of different materials. The electrode containing NPs consisting of a RuO2 core and metallic Ru at the surface outperforms that containing either pure RuO2 NPs or Ru NPs. Impedance spectroscopy studies and DFT calculations suggest that this catalytic activity enhancement arises from improved charge transport properties and from the structure of the exposed metallic Ru shell, which is partially oxidized and highly amorphous.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ru nanoparticles supported on alginate-derived graphene as hybrid electrodes for the hydrogen evolution reaction

  • Mallón Pernia, Laura|||0000-0002-7738-0844
  • Cerezo, Christian|||0000-0001-9537-0642
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Puche, Marta
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Bofill, Roger|||0000-0002-8888-1871
  • Philippot, Karine|||0000-0002-8965-825X
  • Martínez-Prieto, Luis Miguel|||0000-0002-3401-4967
  • Sala, Xavier|||0000-0002-7779-6313
The development of organic-inorganic hybrid materials for redox catalysis is key to access new energy conversion schemes and the sustainable production of dihydrogen. Here, bare and P-doped graphene arising from the pyrolysis of biomass (alginate from marine algae) has been used as a support for the growth and stabilization of ultra-small Ru/RuO2 NPs through organometallic synthesis. P-doped graphene allows obtaining smaller and better dispersed NPs in hybrid electrodes of lower roughness and electroactive surface area. Electrochemical activation of the as-synthesised supported nanoparticles by reduction of the passivating RuO2 layer generates excellent HER electrocatalysts under acidic conditions (η10 of 29 mV and 15 mV for the bare and P-doped electrodes, respectively). P doping, identified as surface phosphates by 31P solid state NMR, induces improvement of all HER benchmarking parameters studied, including overpotential and exchange and specific current densities. All studied materials show excellent long-term stability and selectivity for hydrogen generation with no sign of deactivation after 12 h under turnover conditions and almost quantitative faradaic efficiencies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

'One-pot' engineering of 0D carbon-based inorganic nanoarchitectonics for boosting multitasking catalytic activity

  • Hou, Heting|||0000-0002-7806-1781
  • Muñoz, Jose|||0000-0001-9529-6980
  • Gómez Pérez, Inmaculada Jénnifer|||0000-0002-1493-1864
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Sala, Xavier|||0000-0002-7779-6313
  • García-Antón, Jordi|||0000-0002-2401-0401
Easy-to-make nanostructured materials that exhibit multitasking activity -while reducing the use of hazardous solvents throughout its architectural design- is a must to advance in the so-called Industry 4.0. Herein, a simple and eco-friendly 'one-pot' functionalization approach has been devised for synthesizing 0D carbon-based inorganic nanoarchitectonics made of carbon dots (CDs, as core carbon source) carrying two different inorganic building blocks, viz. quantum dots (CdSe@ZnS-QDs) and metal nanoparticles (Pt-NPs). As a proof-of-principle, the multi-catalytic activity of the resulting 0D Pt/QD/CD nanoarchitectonics by means of photoelectrocatalysis and sonocatalysis has been considered and compared with the pristine CD counterpart, demonstrating its suitability for boosting pivotal catalytic tasks like i) the photoelectrogeneration of hydrogen via hydrogen evolution reaction (HER), and ii) the sonodegradation of environmental pollutants (i.e., Rhodamine B) in water. Overall, this chemical approach is general and might be tailored for architecting alternative carbon-based heterostructures to enhance alternative multi-catalytic tasks.