Pasar al contenido principal

DESARROLLO DE PROCESOS DE TRATAMIENTO Y ACONDICIONAMIENTO DE AGUA: ELIMINACION DE MICROCONTAMINANTES Y RETENCION DE MICROPLASTICOS.

PID2019-105079RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetic study of phenol hydroxylation by H2O2 in 3D Fe/SiC honeycomb monolithic reactors: Enabling the sustainable production of dihydroxybenzenes

  • Vega, Gonzalo
  • Quintanilla, Asunción
  • Belmonte, Manuel
  • Casas, José A.
[EN] The chemical kinetics of phenol hydroxylation by hydrogen peroxide (HO) to produce dihydroxybenzenes was studied using a 3D printed monolithic reactor. The monoliths were manufactured by the Robocasting technique. They consisted on honeycomb-structured Fe/SiC nanoparticles (13.5 mm in diameter and 14.8 mm in length) with triangle cell geometry and staggered interconnected channels (71 cells per cm). The isothermal reactor was constituted by three stacked monoliths and was operated as an ideal plug flow reactor, according to the measured residence time distribution. The hydroxylation experiments were carried out at C = 0.33 M, phenol:HO molar ratio 1:1, τ(space time) = 0–254 g h L, T = 80, 85 and 90 °C and water as unique solvent. Experimental results showed no mass transfer limitations. The best fits were obtained for HO decomposition with a Langmuir-Hinshelwood-Hougen-Watson kinetic model and for phenol hydroxylation, as well as, catechol and hydroquinone production, with an Eley-Rideal kinetic model. The hydroxylation reaction mechanism underling to the developed model involved three elementary reactions: (1) adsorption of HO molecules on the iron active sites, (2) chemical surface HO decomposition into the hydroxyl radical species, and (3) reaction between adsorbed radical species and phenol in solution leading to the dihydroxybenzene formation and freeing the iron catalytic active sites (rds). This work contributes to the implementation of outstanding 3D Fe/SiC honeycomb monolithic reactors, with a dihydroxybenzene selectivity above 99% at 80 °C, for the sustainable production of hydroxylated aromatics., The authors thank the financial support by the Community of Madrid through the project S2018/EMT-4341 and the Government of Spain through the projects: PID2019-105079RB-I00, PGC2018-095642-B-I00 and RTI2018-095052-B-I00 (MCIU/AEI/FEDER, UE). Also, G. Vega acknowledges the Universidad Autonoma de Madrid for the Predoctoral contract FPI/UAM2021.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the degradation of microplastics by Fenton oxidation: From surface modification to mineralization

  • Ortiz, David
  • Muñoz, Macarena
  • Nieto-Sandoval, Julia
  • Romera-Castillo, Cristina
  • Pedro, Zahara M. de
  • Casas, José A.
10 pages, 5 figures, 2 tables, supplementary data https://doi.org/10.1016/j.chemosphere.2022.136809.-- Data availability: Data will be made available on request, This work aims at evaluating the fate of microplastics (MPs) along Fenton oxidation. For such goal, realistic MPs (150–250 μm) of five representative polymer types (PET, PE, PVC, PP and EPS) were obtained from commercial plastic products by cryogenic milling. Experiments (7.5 h) were performed under relatively severe operating conditions: T = 80 °C; pH0 = 3; [H2O2]0 = 1000 mgL−1 (15 doses, 1 every 0.5 h); [Fe3+]0 = 10 mgL−1 (5 doses, 1 every 1.5 h). Slight MPs weight losses (∼10%) were achieved after Fenton oxidation regardless the MP nature. Nevertheless, oxidation yield clearly increased with decreasing the particle size given their higher exposed surface area (up to 20% weight loss with 20–50 μm EPS MPs). Clearly, MPs suffered important changes in their surface due to the introduction of oxygenated groups, which made them more acidic and hydrophilic. Furthermore, MPs progressively reduced their size. In fact, they can be completely oxidized to CO2, as demonstrated in the oxidation of PS nanoplastics (140 nm), where 70% mineralization was achieved. The nature of the plastic particles had a relevant impact on its overall oxidation, being more prone to be oxidized those polymers which contain aromatic rings in their structures (EPS and PET) compared to those formed by alkane chains (PE, PP and PVC). In the latter, the presence of substituents also reduced their oxidation potential. Remarkably, possible leachates released along reaction were more quickly oxidized than the MPs/NPs, so it can be assumed that these dissolved compounds would be completely removed once the solid particles are eliminated. Notably, the leachates obtained upon MPs oxidation were more biodegradable than the released from the fresh solids. All this knowledge is crucial for the understanding of MPs oxidation by the Fenton process and opens the door for the design and optimization of this technology either for water treatment or for analytical purposes (MPs isolation), This research has been supported by the Autonoma University of Madrid and Community of Madrid through the project SI1-PJI-2019-00006, and by the Spanish MINECO through the project PID2019-105079RB-I00. D. Ortiz thanks the Spanish MIU for the FPU predoctoral grant (FPU19/04816). M. Munoz and J. Nieto-Sandoval thank the Spanish MINECO for the Ramón y Cajal postdoctoral contract (RYC-2016-20648) and the FPI predoctoral grant (BES-2017-081346), respectively. C. Romera-Castillo was supported by JIN-2019 project (PID2019-109889RJ-I00) from the Spanish Ministry of Science and Innovation and the Agencia Estatal de Investigación and acknowledges the “Severo Ochoa Centre of Excellence” accreditation (CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D printing of cubic zirconia lattice supports for hydrogen production

  • Díaz-Herrezuelo, Irene
  • Koller, M.
  • Quintanilla, Asunción
  • Vega, G.
  • Casas, J. A.
  • Pérez-Coll, Domingo
  • Seiner, H.
  • Osendi, María Isabel
  • Miranzo López, Pilar
  • Belmonte, Manuel
The demand for hydrogen has extraordinarily grown during the last years, being one of the most attractive forms of fuels to produce green energy. Cubic zirconia ceramics are considered promising catalytic supports, and the additive manufacturing of porous 3D structures based on these ceramics could enhance their catalytic performance. Herein, lightweight highly porous (up to 88%) 3D patterned 8 mol% yttria-stabilized cubic zirconia (8YSZ) scaffolds are manufactured by robocasting from pseudoplastic aqueous-based inks to produce catalytic supports for the hydrogen (H2) production. These scaffolds are thermally treated at temperatures ranging between 1000 and 1400 ◦C and, hence, mechanically and electrically characterized. 3D 8YSZ structures sintered at 1200 ◦C, with an appropriate balance between high porosity (86%) and compressive strength (3.7 MPa), are impregnated with palladium (Pd) catalytic nanoparticles and employed in the catalytic dehydrogenation of renewable formic acid (FA) using a fixed-bed reactor. 3D Pd/8YSZ catalyst leads to the continuous production of CO-free H2 with a FA conversion of 32% at T = 55 ◦C., Proyectos RTI2018-095052-B-I00, PID2019-105079RB-I00, PID2021-125427OB-I00 EIN2020-112153, Peer reviewed