Pasar al contenido principal

DISEÑO Y DESARROLLO DE ESTRUCTURAS FOTONICAS ACTIVAS Y DIFRACTIVAS PARA UNA INTEGRACION EFICIENTE TRIDIMENSIONAL

PID2019-108598GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Study of Full-Color Multiplexed Transmission Holograms of Diffusing Objects Recorded in Photopolymer Bayfol HX

  • Sevilla, Marina
  • Chemisana Villegas, Daniel
  • Atencia Carrizo, Jesús
  • Marín Sáez, Julia
A wavelength multiplexing procedure for color transmission volume holograms of diffusing objects recorded in Bayfol® HX200 photopolymer is proposed. For the recording, three lasers of 442 nm, 532 nm and 633 nm, and a Spectralon® diffusing object were used for monochromatic and polychromatic calibration. Monochromatic calibration shows that the maximum index modulation obtained for each wavelength was not enough to give 100% efficiency, although the efficiency values achieved in the case of monochromatic recordings with diffusing objects were high, at around 90% for 633 nm and 532 nm recordings, and 60% for 442 nm. The efficiency values obtained for multiplexed holograms were 19.1% for the 442 nm hologram, 25.9% for the 532 nm hologram and 15.2% for the 633 nm., This research was funded by the “Diputación General de Aragón-Fondo Social Europeo” (TOL research group, E44_17R), the “Generalitat de Catalunya” (2017FI_B2_00127 and 2017 SGR 1276) and the “Ministerio de Ciencia e Innovación” (PID2019-108598GB-I00, PID2019-111536RB-I00 and PID2021-114311RA-I00)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of Multicore Integrated Active Waveguides Written in an Er3+/Yb3+Codoped Phosphate Glass

  • Benedicto, David
  • Días-Ponte, Antonio
  • Martín, Juan Carlos
  • Vallés, J. A.
  • Solís Céspedes, Javier
16 pags., 9 figs., 1 tab., A new methodology to completely characterize active multicore waveguides is proposed. The method is applied to two-core waveguides written in an Er3+/Yb3+ co-doped phosphate glass by femtosecond laser inscription. Determination of the core diameter and refractive index variation is based on asymmetric excitation of the dual core waveguide and measurements of the intensity output distribution. Moreover, a single core waveguide has also been written for characterization purposes and signal enhancement measurements carried out on it have allowed the determination of the glass active properties. Finally, enhancement measurements on the two-core waveguides for different pump powers and core-to-core separations have been performed, together with simulations of the experiments using the parameters determined in the characterization procedure. The good agreement between measurements and simulations supports the validity of the characterization method presented. The proposed characterization technique is suitable for any multicore symmetric structure regardless the fabrication method and the number of cores, allowing the benefits of multi-core fibre designs to be transferred to integrated active structures., This work was supported in part by the Spanish Ministry of Science and Innovation under Grant PID2019-108598GB-I00 and Project, in part by the Department of Industry and Innovation (Government of Aragon) through the research group under Grant E44-20R (cofinanciando con Feder 2014-2020: Construyendo Europa desde Aragón), in part by the National Research under Grant UDiSON (TEC2017-82464-R) from the Spanish Research Agency (AEI, Ministry of Research and Innovation), and in part by the European Regional Development Fund (ERDF), as well as the Consejo Superior de Investigaciones Científicas through the “intramural” Project under Grant 201850E057 is simi- larly acknowledged. (Corresponding author: Juan A. Vallés)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An Integrated Pump-Controlled Variable Coupler Fabricated by Ultrafast Laser Writing

  • Benedicto, David
  • Martín, Juan Carlos
  • Días-Ponte, Antonio
  • Solís Céspedes, Javier
  • Vallés, J. A.
The design and fabrication of a integrated symmetric directional coupler dependent o the pumping power and operating at a 1534 nm wavelength is reported. The twin-core waveguide was inscribed into Er3+/Yb3+ co-doped phosphate glass by a femtosecond laser direct writing technique. By optical pumping, the coupling ratio can be modulated due to the changes induced in the refractive index of the material. The experimental results demonstrated that the coupling ratio can be tuned continuously from 100/0 to 50/50 by increasing the pump’s power from 0 to 350 mW. The developed twin-core coupler has promising applications for on-chip all-optical signal processing and communication systems., This work has been partially funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 through PID2019-108598GB-I00, by the Government of Aragon through the research group TOL under Grant E44-23R and by MCIN/AEI/10.13039/501100011033 through PID2020-112770RB-C21 project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling optical amplification in Er/Yb-codoped integrated Bragg gratings

  • Sanz-Felipe, Ángel
  • Ariza, Rocío
  • Benedicto, David
  • Macias-Montero, M.
  • Vallés, Juan A.
  • Solís Céspedes, Javier
7 pags., 8 figs., Bragg gratings inscribed in active waveguides combine very efficient reflective properties with the amplifying capability of rare-earths, which may lead to large amplification and lasing performance. However, the response of these photonic structures highly depends on the grating parameters and working conditions, so modeling their behavior and dependences becomes fundamental. In this work, a numerical method has been implemented to simulate the optical power propagation along an Er/Yb-codoped integrated waveguide Bragg grating as a function of its most relevant operational parameters. The results obtained show the optimal conditions to maximize its performance as a highly amplifying reflector, but also its capability as a monolithic laser. In addition, the modeling results adequately match experimental values measured in fs-laser written structures in Er/Yb-codoped phosphate glass, supporting the accuracy of the numerical method developed and its usefulness for further optimizing these promising photonic structures., This work was partially supported by the grants PID2020-112770RBC21 and PID2019-108598 GB-I00 funded by MCIN/AEI/10.13039/ 501100011033, and by the Department of Industry and Innovation (Government of Aragon) ´ through the research group Grant E44-20R (cofinanciado con FEDER 2014–2020: Construyendo Europa desde Aragon). ´ S.F. acknowledges the projects CUD-2021_05 and CUD2023_12 of the Centro Universitario de la Defensa de Zaragoza. M.M. acknowledges the postdoctoral Juan de la Cierva Incorporacion ´ grant (IJCI-2017-33317) of the Spanish Ministry of Research and Innovation, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Contribution to the Improvement of the Correlation Filter Method for Modal Analysis with a Spatial Light Modulator

  • Benedicto, David
  • Collados, María Victoria
  • Martín, Juan C.
  • Atencia, Jesús
  • Mendoza-Yero, Omel
  • Vallés, Juan A.
Modal decomposition of light is essential to study its propagation properties in waveguides and photonic devices. Modal analysis can be carried out by implementing a computer-generated hologram acting as a match filter in a spatial light modulator. In this work, a series of aspects to be taken into account in order to get the most out of this method are presented, aiming to provide useful operational procedures. First of all, a method for filter size adjustment based on the standard fiber LP-mode symmetry is presented. The influence of the mode normalization in the complex amplitude encoding-inherent noise is then investigated. Finally, a robust method to measure the phase difference between modes is proposed. These procedures are tested by wavefront reconstruction in a conventional few-mode fiber.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An integrated pump-controlled variable coupler fabricated by ultrafast laser writing

  • Benedicto, David
  • Martín, Juan C.
  • Dias-Ponte, Antonio
  • Solis, Javier
  • Vallés, Juan A.
The design and fabrication of a integrated symmetric directional coupler dependent o the pumping power and operating at a 1534 nm wavelength is reported. The twin-core waveguide was inscribed into Er3+/Yb3+ co-doped phosphate glass by a femtosecond laser direct writing technique. By optical pumping, the coupling ratio can be modulated due to the changes induced in the refractive index of the material. The experimental results demonstrated that the coupling ratio can be tuned continuously from 100/0 to 50/50 by increasing the pump’s power from 0 to 350 mW. The developed twin-core coupler has promising applications for on-chip all-optical signal processing and communication systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Holographic sensor based on Bayfol HX200 commercial photopolymer for ethanol and acetic acid detection

  • Potarniche, Ioana-Adriana
  • Marín-Sáez, Julia
  • Collados, M. Victoria
  • Atencia, Jesús
This paper presents a holographic sensor based on reflection holograms recorded in the commercial photopolymer Bayfol® HX 200. The recording geometry and index modulation of the hologram were optimised to improve accuracy for this specific application. The sensor was subjected to tests using various analytes, and it exhibited sensitivity to acetic acid and ethanol. The measurements revealed a correlation between the concentration of the analyte in contact with the sensor’s surface and the resulting wavelength shift of the diffracted light. The minimum detectable concentrations were determined to be above 0.09 mol/dm3 for acetic acid and 5% (v/v) for ethanol. Notably, the sensors demonstrated a rapid response time. Given that ethanol serves as a base for alcoholic beverages, and acetic acid is commonly found in commercial vinegar, these sensors hold promise for applications in food quality control.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modeling optical amplification in Er/Yb-codoped integrated Bragg gratings

  • Sanz-Felipe, Ángel
  • Ariza, Rocío
  • Benedicto, David
  • Macias-Montero, Manuel
  • Vallés, Juan A.
  • Solís, Javier
Bragg gratings inscribed in active waveguides combine very efficient reflective properties with the amplifying capability of rare-earths, which may lead to large amplification and lasing performance. However, the response of these photonic structures highly depends on the grating parameters and working conditions, so modeling their behavior and dependences becomes fundamental. In this work, a numerical method has been implemented to simulate the optical power propagation along an Er/Yb-codoped integrated waveguide Bragg grating as a function of its most relevant operational parameters. The results obtained show the optimal conditions to maximize its performance as a highly amplifying reflector, but also its capability as a monolithic laser. In addition, the modeling results adequately match experimental values measured in fs-laser written structures in Er/Yb-codoped phosphate glass, supporting the accuracy of the numerical method developed and its usefulness for further optimizing these promising photonic structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Critical Design and Operating Parameters of Active Waveguide Bragg Gratings for Laser Performance

  • Sanz-Felipe, Ángel
  • Vallés, Juan A.
Active waveguide Bragg gratings (AWBGs) are promising photonic structures that combine the very efficient reflective properties of a Bragg grating with the power amplification character of rare earths. This combination may lead to a potential monolithic laser under the proper conditions. However, the photonic response of these structures highly depends on the grating design and operating parameters, so modeling its response for their laser performance is a must. In this work, a numerical method is employed to calculate the optical power propagation along an Er/Yb-codoped integrated AWBG. A complete database of the AWBG response as a function of the most relevant operational parameters is obtained. As a result, the critical values of each design and operating parameter to achieve its laser performance have been determined, which represents very useful information for further experimental design, optimization, and fabrication of these photonic structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Full-color multiplexed reflection hologram of diffusing objects recorded by using simultaneous exposure with different times in photopolymer Bayfol® HX

  • Vázquez-Martín I.
  • Marín Sáez J.
  • Gómez Climente M.
  • Chemisana D.
  • Collados Collados, MV.
  • Atencia Carrizo J.
An optimized wavelength multiplexing procedure for color reflection holograms of diffusing objects recorded in Bayfol® HX photopolymer is proposed. It is based on simultaneous initial illumination of all the wavelengths and sequential shuttering down of the laser beams involved. Three lasers of 442 nm, 532 nm and 633 nm were selected, as a tradeoff solution between setup complexity and color reproduction accuracy. The obtained results prove that the presented method improves the simultaneous and sequential exposure methods by increasing the mean efficiency and reducing the standard deviation (increasing uniformity) of the involved wavelengths. For a Spectralon® diffusing object, the assessed method reports a mean efficiency of 25.0% with a standard deviation of 2.9%, while simultaneous and sequential iterative exposures result in mean efficiencies of 12.1% and 20.6% with standard deviations of 3.4% and 5.4%, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study of full-color multiplexed transmission holograms of diffusing objects recorded in photopolymer bayfol hx

  • Sevilla, M.
  • Marín-Sáez, J.
  • Chemisana, D.
  • Collados, M.V.
  • Atencia, J.
A wavelength multiplexing procedure for color transmission volume holograms of diffusing objects recorded in Bayfol® HX200 photopolymer is proposed. For the recording, three lasers of 442 nm, 532 nm and 633 nm, and a Spectralon® diffusing object were used for monochromatic and polychromatic calibration. Monochromatic calibration shows that the maximum index modulation obtained for each wavelength was not enough to give 100% efficiency, although the efficiency values achieved in the case of monochromatic recordings with diffusing objects were high, at around 90% for 633 nm and 532 nm recordings, and 60% for 442 nm. The efficiency values obtained for multiplexed holograms were 19.1% for the 442 nm hologram, 25.9% for the 532 nm hologram and 15.2% for the 633 nm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Characterization of Multicore Integrated Active Waveguides Written in an Er3+/Yb3+Codoped Phosphate Glass

  • Benedicto D.
  • DIas A.
  • Martin J.
  • Valles J.-A.
  • Solis J.
A new methodology to completely characterize active multicore waveguides is proposed. The method is applied to two-core waveguides written in an Er3+/Yb3+ co-doped phosphate glass by femtosecond laser inscription. Determination of the core diameter and refractive index variation is based on asymmetric excitation of the dual core waveguide and measurements of the intensity output distribution. Moreover, a single core waveguide has also been written for characterization purposes and signal enhancement measurements carried out on it have allowed the determination of the glass active properties. Finally, enhancement measurements on the two-core waveguides for different pump powers and core-to-core separations have been performed, together with simulations of the experiments using the parameters determined in the characterization procedure. The good agreement between measurements and simulations supports the validity of the characterization method presented. The proposed characterization technique is suitable for any multicore symmetric structure regardless the fabrication method and the number of cores, allowing the benefits of multi-core fibre designs to be transferred to integrated active structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Characterization of asymmetrically Fed Er3+/Yb3+ Co-Doped double core integrated waveguides

  • Benedicto, David
  • Valles, Juan A.
  • Martin, Juan C.
The output signal intensity distribution of several fs-laser written double-core active waveguides was registered. The ratio between cores output powers exhibited a strong dependence on the input pump power when both input pump and signal powers were directly coupled to one of the cores. A model based on the coupled-mode theory which incorporates non-identical cores and longitudinally variable signal gain coefficients was implemented. Simulations based on this model are compared to experiments. A good agreement is achievable if small differences between cores’ parameters (within the manufacturing precision limits) are allowed. IEEE
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Study of Full-Color Multiplexed Transmission Holograms of Diffusing Objects Recorded in Photopolymer Bayfol HX

  • Sevilla, Marina
  • Chemisana Villegas, Daniel
  • Atencia Carrizo, Jesús
  • Marín Sáez, Julia
A wavelength multiplexing procedure for color transmission volume holograms of diffusing objects recorded in Bayfol® HX200 photopolymer is proposed. For the recording, three lasers of 442 nm, 532 nm and 633 nm, and a Spectralon® diffusing object were used for monochromatic and polychromatic calibration. Monochromatic calibration shows that the maximum index modulation obtained for each wavelength was not enough to give 100% efficiency, although the efficiency values achieved in the case of monochromatic recordings with diffusing objects were high, at around 90% for 633 nm and 532 nm recordings, and 60% for 442 nm. The efficiency values obtained for multiplexed holograms were 19.1% for the 442 nm hologram, 25.9% for the 532 nm hologram and 15.2% for the 633 nm., This research was funded by the “Diputación General de Aragón-Fondo Social Europeo” (TOL research group, E44_17R), the “Generalitat de Catalunya” (2017FI_B2_00127 and 2017 SGR 1276) and the “Ministerio de Ciencia e Innovación” (PID2019-108598GB-I00, PID2019-111536RB-I00 and PID2021-114311RA-I00)