Pasar al contenido principal

FABRICACION ADITIVA DE MATERIALES CERAMICOS AVANZADOS Y SU POSTPROCESAMIENTO MEDIANTE TECNICAS COLOIDALES

PID2022-137274NB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biocompatible colloidal feedstock for material extrusion processing of bioceramic-based scaffolds

  • Ferrández-Montero, Ana
  • Ortega-Columbrans, Pablo
  • Eguiluz, Álvaro
  • Sánchez-Herencia, A. Javier
  • Detsch, R.
  • Boccaccini, A.R.
  • Ferrari, Begoña
Nowadays an enormous effort has been made to impulse the incorporation of additive manufacturing (AM) approaches in the biomedical sector. One of the most recognized biomaterials for this end is bioceramics such as hydroxyapatite (HA), but unfortunately, ceramics present a lack of accessible technologies based on AM. Consequently, the development of new methodologies which enable the manufacture of bioceramic-based scaffolds is imperative. A large number of publications on polymer–ceramic composite processed by Material Extrusion are available, so far, the maximum ceramic loading reached is still a parameter to improve. Recently an alternative colloidal processing technique to prepare ceramic-based composite feedstock for material extrusion has been proposed. It has been demonstrated that tailoring the surface of the ceramic particles enables the processing of high ceramic loading composites by AM. This article shows the potential of the colloidal approach to process biocompatible PLA/HA feedstock increasing the homogeneity of the bioceramic phase into the composite. The feedstock characterization shows that HA surface modification makes possible the successful dispersion and the ceramic load increase without modifying the biocompatibility. The ceramic load increase does not modify the melting properties of the polymeric matrix required for the 3D printing process. This methodology allows for the first time the development of a final 3D printed composite structure with contents up to 72 wt% of HA by Material Extrusion. This colloidal approach paves the way to transfer the use of additive manufacturing techniques mainly devoted to polymeric biomaterials to other types of biomaterials such as bioceramics. Highlights: A colloidal approach for 3D printing of PLA/HA composites is proposed. HA surface modification made possible a load increase with high dispersion. The characterization of a PLA/HA feedstock for 3D printing is established. Biocompatible PLA/HA feedstock is processed by AM in customized structures. Colloidal approach allows the processing of 3D structures with 72 wt% of HA. © 2024 The Authors. Polymer Composites published by Wiley Periodicals LLC on behalf of Society of Plastics Engineers., Comunidad de Madrid, Grant/AwardNumber: 2022-T1/IND-23973; SpanishGovernment (Agencia Estatal deInvestigación), Grant/Award Numbers:PID2022-137274NB-C31(3DPOSTPERFORM), TED2021-129920B-C41 (EC0FOOTPrint); FEDER, UE:PID2022-137274NB-C31(3DPOSTPERFORM) European Union“NextGeneration”/PRTR: TED2021-129920B-C41 (EC0FOOTPrint), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cathodic electrophoretic deposition (EPD) of two-dimensional colloidal Ni(OH)2 and NiO nanosheets on carbon fibers (CF) for binder-free structural solid-state hybrid supercapacitor

  • Urra Sánchez, Oxel
  • Artigas-Arnaudas, J.
  • Sánchez-Herencia, A. Javier
  • Ferrari, Begoña
  • Ureña, A.
  • Sánchez, M.
The exponential growth of the renewable energies field and the increase of portable electric vehicles (EVs) demand a new generation of multifunctional efficient electrochemical energy storage devices (EESDs). In this work, binder-free hybrid battery-like electrodes were prepared by cathodic electrophoretic deposition (EPD). One-step (synthesis and deposition) processing of β-Ni(OH)2 was developed avoiding a previous calcination step to form NiO. The redox reaction (RR) contribution to the electrochemical performance of the hybrid electrodes was enhanced without influencing the mechanical properties of the CF substrate. Moreover, the sintering of the coated-CF under a high-vacuum atmosphere and the controlled mass deposition (<0.1 mg·cm−2) demonstrated to enhance the synergic effect of the redox reactions, ion diffusion (NiO) and the electrochemical double layer (CF) contributions. Thus, the hybrid electrodes in a half-cell configuration achieved remarkably high capacitance values (1161 F·g−1 at 2 A·g−1), while hybrid electrodes in a symmetric structural hybrid solid-state supercapacitor (HSSS) with an ionic liquid/resin structural solid-electrolyte reached a capacitance of 9.8 mF·g−1, a power and energy density of 3.5 mW·kg−1 and 1 mWh·kg−1 respectively and good electrochemical stability with a Columbic efficiency of 75 % at 0.8 mA·g−1. © 2024 The Authors, The authors want to acknowledge the financial support from the Spanish Government ( Agencia Estatal de Investigación ) through the projects PID2022-137274NB-C31 and TED2021-129920B-C41 ( AEI/10.13039/501100011033 ) and PID2022-136636OB-I00 . All are cofounded by the European Regional Development Fund (FEDER/ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Colloidal route towards sodium ionic conductor (NASICON) 3D complex solid electrolyte structures fabricated by direct ink writing (DIW)

  • Urra Sánchez, Oxel
  • Ferrari, Begoña
  • Sánchez-Herencia, A. Javier
  • Franchin, G.
  • Colombo, P.
Progressing towards a sustainable energy model, safer new generation high-performance energy storage devices with large energy density and power are needed. In this sense, the improvement in terms of efficiency and sustainability has led to the interest in solid-state batteries (SSBs). Lately, sodium-ion batteries (SIBs) have become an emerging alternative due to the abundance of raw materials, low cost, and improvements in terms of fast sodium-ion conductor solid electrolytes (SCSEs). Among all the SCSEs, the sodium superionic conductor (NASICON) type electrolyte is one of the most well-known electrolytes, being widely developed in terms of synthesis and materials. However, the processing and manufacturing of these electrolytes have gone almost unnoticed, without considering that well-designed structures of electrodes/electrolytes are the bridge toward turning advanced energy materials into high-performance devices. This work presents the fabrication of 3D complex structures based on NASICON sodium solid electrolytes, obtained for the first time by direct ink writing (DIW). Through a colloidal route, fine NASICON phase powder with high pureness was prepared, enabling the manufacturing of intricate NASICON-printed electrolytes in a one-step fabrication process. By optimizing the ink, a dense electrolyte layer, acting as an ionic conductor and separator, was inserted between two complex porous pattern layers obtaining a device with a total height below 1.15 mm. Further, the densification of the 3D electrolyte was enhanced, reaching high ionic conductivities at room temperature (3.10−4 S cm−1). Thus, a high-performance sodium ion conductor NASICON solid electrolyte with shorter diffusion pathways and larger interfacial surface areas between electrode/electrolyte was obtained, improving the overall electrochemical performance of the device by a 3D layer-by-layer design. © 2024 The Authors, This work has been supported by the Spanish Government (Agencia Estatal de Investigacion) through the projects PID2022-137274NB-C31/AEI/10.13039/501100011033/FEDER, UE and TED2021-129920B-C41/AEI/10.13039/501100011033/Union Europea Next Generation EU/PRTR. The authors are grateful to the JECS Trust for funding the visit of Oxel Urra to the University of Padova from September to December 2022 (Contract 2022306) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In Vitro Biological Properties Assessment of 3D-Printed Hydroxyapatite–Polylactic Acid Scaffolds Intended for Bone Regeneration

  • Shan, Eddy
  • Chamorro, Cristina
  • Ferrández-Montero, Ana
  • Martin Rodríguez, Rosa M.
  • Ferrari, Begoña
  • Sánchez-Herencia, A. Javier
  • Virto, Leire
  • Marín, María José
  • Figuero, Elena
  • Sanz, Mariano
This study evaluated the biological performance in vitro of two 3D-printed hydroxyapatite (HA) and polylactic acid (PLA) composite scaffolds with two different infill densities (50% [HA-PLA50] and 70% [HA-PLA70]). Comparative analysis using MG-63 cell cultures evaluated the following: (1) integrity after exposure to various sterilization methods; (2) cell viability; (3) morphological characteristics; (4) cell proliferation; (5) cytotoxicity; (6) gene expression; and (7) protein synthesis. Ultraviolet radiation was the preferred sterilization method. Both scaffolds maintained adequate cell viability and proliferation over 7 days without significant differences in cytotoxicity. Notably, HA-PLA50 scaffolds demonstrated superior osteogenic potential, showing a significantly higher expression of collagen type I (COL1A1) and an increased synthesis of interleukins 6 and 8 (IL-6, IL-8) compared to HA-PLA70 scaffolds. While both scaffold types supported robust cell growth, the HA-PLA50 formulation exhibited enhanced bioactivity, suggesting a potential advantage for bone tissue engineering applications. These findings provide important insights for optimizing 3D-printed bone graft substitutes., This research was supported by the Spanish Centre for the Development of Industrial Technology (CDTI) through the grant SNEO-20211395 to COLFEED4Print S.L. which contracted the Complutense University of Madrid. A. Ferrandez-Montero is granted by the Comunidad de Madrid for “Atracción de Talento” project 2022-T1/IND-23973 and PID2022-137274NB-C31 (3DPOSTPERFORM) funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning Biodegradation and Physicochemical Features of PLA/HAp Biomaterials by Incorporating Nanofibrillated Cellulose Through a Colloidal Processing Route

  • Juan Cano, María Eugenia
  • González Granados, Zoilo
  • Rincón, Esther
  • Sánchez-Herencia, A. Javier
  • Ferrari, Begoña
  • Ferrández-Montero, Ana
Biomaterials play a fundamental role in providing a porous structure that mimics the natural structure of human bone and serves as a support while tissue regenerates. With the use of biodegradable materials, it is possible to avoid unnecessary second surgeries for implant removal. The main objective of this article has been focused on modifying the degradation rate of a biodegradable composite material based on polylactic acid (PLA) reinforced with hydroxyapatite (HAp) by incorporating nanofibrillated cellulose (NFC), capable of tuning the porosity within the matrix. To introduce NFC into the composite material, a colloidal processing approach was chosen to improve and ensure its compatibility with the polymeric matrix. The incorporation of different ratios of NFC generally decreases the mechanical properties, but by adjusting the ratio of HAp/NFC content, this parameter is normalized. The hydrophilicity of the composite is improved by HAp/NFC incorporation, and degradation tests confirm that an increase in the percentage of NFC in the matrix is directly proportional to an increase in the degradation rates of the material. These results represent a significant improvement in personalized medicine, where the design of biodegradable biomaterials with hierarchical and controlled porosity opens new paths in the development of therapies and treatments personalized for each patient., This work was supported by Comunidad de Madrid under the project 2022-T1/IND-23973 granted by “Atracción de Talento” program, and by the Spanish Government (Agencia Estatal de Investigación) through the projects PID2022-137274NB-C31 (3DPOSTPERFORM) cofunded by AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR). Additionally, this research was supported by TED2021-129920B-C41,C42 and CPP2023-010820 funded by MICIU/AEI/10.13039/501100011033 and the European Union “NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Colloidal processing as a successful alternative to produce PLA/Mg composites with tailored mechanical and biodegradation properties

  • Ferrández-Montero, A.
  • Lieblich, Marcela
  • Sánchez-Herencia, A. Javier
  • Detsch, R.
  • Boccaccini, A.R.
  • Ferrari, B.
The PLA/Mg composite has been proposed as a promising new biodegradable biomaterial with interesting properties for use in a number of biomedical applications. However, its processing is still highly problematic mainly due to its high reactivity and biodegradability. Recently the benefit of a new processing route based on a colloidal approach has been proposed based on the particle surface modification with different polyelectrolytes. Colloidal route improves the mechanical and biodegradation properties as a consequence of the creation of a strong polymer-metal interface and an increase of the particle dispersion. In this paper, we demonstrated these benefits compared with the most widespread mixing technique, the thermal extrusion. Firstly, PLA/Mg composite was evaluated in terms of its thermal behavior to determine the processing parameters required. After processing, the colloidal composite presents a covalent bond between the metallic particle and thepolymer when produced by the process of reactive extrusion, as determined by FTIR-ATR. This results in an improvement of the dispersion and the mechanical properties, reaching a maximum compressive strength of 130 MPa and an elastic modulus of 2150 MPa with 25 vol.% Mg particle loading. The colloidal processing also interferes in the biodegradation properties of PLA/Mg, decreasing the H release by 35 %, increasing the degradation time, and producing materials that degrade more homogeneously. Furthermore, the colloidal composite was found to be cytocompatible as the tests carried out with the ST2 bone marrow stromal cell line showed no negative effects. The cells exhibited a three-dimensional spreading morphology on the materials., This work was supported by Comunidad de Madrid under the project 2022-T1/IND-23973 granted by “Atracción de Talento” program, and by the Spanish Government (Agencia Estatal de Investigación) through the projects PID2022–137274NB-C31 (3DPOSTPERFORM) funded by AEI/10.13039/501100011033/ FEDER, UE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biological Characterization of 3D-Printed, Sintered Hydroxyapatite Scaffolds Obtained by Fused Filament Fabrication: An In Vitro Study

  • Shan, Eddy
  • Chamorro, Cristina
  • Ferrández-Montero, Ana
  • Martín-Rodríguez, Rosa María
  • Virto, Leire
  • Marín, María José
  • Ferrari, Begoña
  • Sánchez-Herencia, A. Javier
  • Figuero, Elena
  • Sanz, Mariano
This article belongs to the Special Issue Advanced Technologies for Processing Functional Biomaterials., This study characterized the biological response of MG-63 cells to synthetic, hydroxyapatite scaffolds (HAsint) fabricated via fused filament fabrication. Scaffolds were compared to 2D plate-adherent cultures using six assays: cell morphology and distribution with scanning electron microscopy and confocal laser scanning microscopy; cell proliferation and cytotoxicity via WST-1 tetrazolium assay; relative osteogenic gene expression through reverse-transcription–quantitative polymerase chain reaction, and protein synthesis via multiplex immunoassay. Data were analyzed using one-way ANOVA. Results confirmed high cell viability and uniform distribution on HAsint scaffolds. Proliferation increased significantly over 7 days, though direct cytotoxicity also increased, likely due to the static conditions of the experiment and, subsequently, the high ion reprecipitation from scaffold degradation. Importantly, HAsint scaffolds significantly enhanced osteogenic marker expression of phosphatase alkaline (ALPL), osteopontin (OPN), and osteocalcin (OCN) genes, and elevated concentrations of interleukins (IL)-6, IL-8 and matrix metalloproteinase 1 compared to plate-adherent controls. It can be concluded that 3D-printed HAsint scaffolds support robust osteogenic differentiation and proliferation despite inducing a transient cytotoxic response in vitro. The marked upregulation of key osteogenic genes and proteins confirms the scaffolds’ bioactivity and highlights their potential for bone tissue engineering applications., This research was partially funded by COLFEED4Print S.L. through a research contract (SNEO-20211395) with the Complutense University of Madrid. A. Ferrández-Montero acknowledges financial support from project “Atracción de Talento” 2022-T1/IND-23973 granted by Comunidad de Madrid, and RYC2023-043957-I, funded by MCIU/AEI/10.13039/501100011033 and by the FSE+. Authors acknowledge the Spanish Government for grant PID2022-137274NB-C31 (3DPOSTPERFORM) cofunded by AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR., Peer reviewed