Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Tailoring CNF-TiO2-g-C3N4 hybrid aerogels via surface functionalization for efficient visible-light photocatalytic degradation of methyl orange

  • Montenegro, Remedios
  • Luque, José Manuel
  • Ortega-Columbrans, Pablo
  • Ferrari, Begoña
  • Rodríguez, Alejandro
  • González, Zoilo
An innovative surface functionalization route based on heterostructure engineering was employed to incorporate TiO2-g-C3N4 photocatalysts onto cellulose nanofibers (CNF), resulting in the fabrication of 3D bio-based aerogel structures. The resulting composite aerogels demonstrated efficient photocatalytic performance, achieving 95 % methyl orange removal under visible light irradiation within five hours. The good photocatalytic response of the shaped composite structure is attributed to the high dispersion of photoactive components across the CNF network, promoting effective interaction between the immobilized nanoparticles and the target pollutant. Among the tested formulations, the sample containing 200 % photocatalyst relative to CNF (CNF-200TiO2-g-C3N4) exhibited the highest efficiency, likely due to improved light penetration facilitated by a more porous structure. In addition to enhanced photocatalytic performance, the incorporation of the inorganic phase also led to an improvement in the mechanical properties, increasing from 2.9 to 5.7 times the Young’s modulus value of the CNF-only aerogel. Moreover, the resulting aerogels exhibited good structural stability and sustained photocatalytic activity over three reuse cycles, which means that the composite could be tested in continuous flow systems which usually demand a higher robustness degree.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green hydrogen production using doped Fe2O3 foams

  • Damizia, M.
  • Lloreda-Jurado, P.J.
  • De Filippis, P.
  • de Caprariis, B.
  • Chicardi, Ernesto
  • Sepúlveda, R. Enrique
Hydrogen is the ideal energy vector to reduce our fossil-fuels dependency and diminish the climate change consequence. However, current production is still methane based. It is possible to produce hydrogen using bioethanol from the alcoholic fermentation of organic waste by chemical looping processes, but unfortunately current redox systems generate hydrogen with significant traces of CO. In the case of proton exchange membrane fuel cells (PEMFC), hydrogen must be highly purified to produce electricity. Here, high porosity interconnected FeO foams doped with 2 wt% AlO were manufactured by the freeze-casting method, obtaining around 5.1 mmolH·g of highly pure hydrogen (<10 ppm of CO) consuming only 3.42 mmol of ethanol on each redox cycles, with no deactivation. This result shows the possibility of using an abundant and inexpensive raw material as the iron oxide to scale-up the direct pure H production and facilitates its use in the automotive sector., Financial support for this work has been provided by: Grant PID2021-123010OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Grant TED2021-129920B–C41–C42–C43–C44 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning Biodegradation and Physicochemical Features of PLA/HAp Biomaterials by Incorporating Nanofibrillated Cellulose Through a Colloidal Processing Route

  • Juan Cano, María Eugenia
  • González Granados, Zoilo
  • Rincón, Esther
  • Sánchez-Herencia, A. Javier
  • Ferrari, Begoña
  • Ferrández-Montero, Ana
Biomaterials play a fundamental role in providing a porous structure that mimics the natural structure of human bone and serves as a support while tissue regenerates. With the use of biodegradable materials, it is possible to avoid unnecessary second surgeries for implant removal. The main objective of this article has been focused on modifying the degradation rate of a biodegradable composite material based on polylactic acid (PLA) reinforced with hydroxyapatite (HAp) by incorporating nanofibrillated cellulose (NFC), capable of tuning the porosity within the matrix. To introduce NFC into the composite material, a colloidal processing approach was chosen to improve and ensure its compatibility with the polymeric matrix. The incorporation of different ratios of NFC generally decreases the mechanical properties, but by adjusting the ratio of HAp/NFC content, this parameter is normalized. The hydrophilicity of the composite is improved by HAp/NFC incorporation, and degradation tests confirm that an increase in the percentage of NFC in the matrix is directly proportional to an increase in the degradation rates of the material. These results represent a significant improvement in personalized medicine, where the design of biodegradable biomaterials with hierarchical and controlled porosity opens new paths in the development of therapies and treatments personalized for each patient., This work was supported by Comunidad de Madrid under the project 2022-T1/IND-23973 granted by “Atracción de Talento” program, and by the Spanish Government (Agencia Estatal de Investigación) through the projects PID2022-137274NB-C31 (3DPOSTPERFORM) cofunded by AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR). Additionally, this research was supported by TED2021-129920B-C41,C42 and CPP2023-010820 funded by MICIU/AEI/10.13039/501100011033 and the European Union “NextGenerationEU/PRTR”., Peer reviewed