Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green hydrogen production using doped Fe2O3 foams

  • Damizia, M.
  • Lloreda-Jurado, P.J.
  • De Filippis, P.
  • de Caprariis, B.
  • Chicardi, Ernesto
  • Sepúlveda, R. Enrique
Hydrogen is the ideal energy vector to reduce our fossil-fuels dependency and diminish the climate change consequence. However, current production is still methane based. It is possible to produce hydrogen using bioethanol from the alcoholic fermentation of organic waste by chemical looping processes, but unfortunately current redox systems generate hydrogen with significant traces of CO. In the case of proton exchange membrane fuel cells (PEMFC), hydrogen must be highly purified to produce electricity. Here, high porosity interconnected FeO foams doped with 2 wt% AlO were manufactured by the freeze-casting method, obtaining around 5.1 mmolH·g of highly pure hydrogen (<10 ppm of CO) consuming only 3.42 mmol of ethanol on each redox cycles, with no deactivation. This result shows the possibility of using an abundant and inexpensive raw material as the iron oxide to scale-up the direct pure H production and facilitates its use in the automotive sector., Financial support for this work has been provided by: Grant PID2021-123010OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Grant TED2021-129920B–C41–C42–C43–C44 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biocompatible colloidal feedstock for material extrusion processing of bioceramic-based scaffolds

  • Ferrández-Montero, Ana
  • Ortega-Columbrans, Pablo
  • Eguiluz, Álvaro
  • Sánchez-Herencia, A. Javier
  • Detsch, R.
  • Boccaccini, A.R.
  • Ferrari, Begoña
Nowadays an enormous effort has been made to impulse the incorporation of additive manufacturing (AM) approaches in the biomedical sector. One of the most recognized biomaterials for this end is bioceramics such as hydroxyapatite (HA), but unfortunately, ceramics present a lack of accessible technologies based on AM. Consequently, the development of new methodologies which enable the manufacture of bioceramic-based scaffolds is imperative. A large number of publications on polymer–ceramic composite processed by Material Extrusion are available, so far, the maximum ceramic loading reached is still a parameter to improve. Recently an alternative colloidal processing technique to prepare ceramic-based composite feedstock for material extrusion has been proposed. It has been demonstrated that tailoring the surface of the ceramic particles enables the processing of high ceramic loading composites by AM. This article shows the potential of the colloidal approach to process biocompatible PLA/HA feedstock increasing the homogeneity of the bioceramic phase into the composite. The feedstock characterization shows that HA surface modification makes possible the successful dispersion and the ceramic load increase without modifying the biocompatibility. The ceramic load increase does not modify the melting properties of the polymeric matrix required for the 3D printing process. This methodology allows for the first time the development of a final 3D printed composite structure with contents up to 72 wt% of HA by Material Extrusion. This colloidal approach paves the way to transfer the use of additive manufacturing techniques mainly devoted to polymeric biomaterials to other types of biomaterials such as bioceramics. Highlights: A colloidal approach for 3D printing of PLA/HA composites is proposed. HA surface modification made possible a load increase with high dispersion. The characterization of a PLA/HA feedstock for 3D printing is established. Biocompatible PLA/HA feedstock is processed by AM in customized structures. Colloidal approach allows the processing of 3D structures with 72 wt% of HA. © 2024 The Authors. Polymer Composites published by Wiley Periodicals LLC on behalf of Society of Plastics Engineers., Comunidad de Madrid, Grant/AwardNumber: 2022-T1/IND-23973; SpanishGovernment (Agencia Estatal deInvestigación), Grant/Award Numbers:PID2022-137274NB-C31(3DPOSTPERFORM), TED2021-129920B-C41 (EC0FOOTPrint); FEDER, UE:PID2022-137274NB-C31(3DPOSTPERFORM) European Union“NextGeneration”/PRTR: TED2021-129920B-C41 (EC0FOOTPrint), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cathodic electrophoretic deposition (EPD) of two-dimensional colloidal Ni(OH)2 and NiO nanosheets on carbon fibers (CF) for binder-free structural solid-state hybrid supercapacitor

  • Urra Sánchez, Oxel
  • Artigas-Arnaudas, J.
  • Sánchez-Herencia, A. Javier
  • Ferrari, Begoña
  • Ureña, A.
  • Sánchez, M.
The exponential growth of the renewable energies field and the increase of portable electric vehicles (EVs) demand a new generation of multifunctional efficient electrochemical energy storage devices (EESDs). In this work, binder-free hybrid battery-like electrodes were prepared by cathodic electrophoretic deposition (EPD). One-step (synthesis and deposition) processing of β-Ni(OH)2 was developed avoiding a previous calcination step to form NiO. The redox reaction (RR) contribution to the electrochemical performance of the hybrid electrodes was enhanced without influencing the mechanical properties of the CF substrate. Moreover, the sintering of the coated-CF under a high-vacuum atmosphere and the controlled mass deposition (<0.1 mg·cm−2) demonstrated to enhance the synergic effect of the redox reactions, ion diffusion (NiO) and the electrochemical double layer (CF) contributions. Thus, the hybrid electrodes in a half-cell configuration achieved remarkably high capacitance values (1161 F·g−1 at 2 A·g−1), while hybrid electrodes in a symmetric structural hybrid solid-state supercapacitor (HSSS) with an ionic liquid/resin structural solid-electrolyte reached a capacitance of 9.8 mF·g−1, a power and energy density of 3.5 mW·kg−1 and 1 mWh·kg−1 respectively and good electrochemical stability with a Columbic efficiency of 75 % at 0.8 mA·g−1. © 2024 The Authors, The authors want to acknowledge the financial support from the Spanish Government ( Agencia Estatal de Investigación ) through the projects PID2022-137274NB-C31 and TED2021-129920B-C41 ( AEI/10.13039/501100011033 ) and PID2022-136636OB-I00 . All are cofounded by the European Regional Development Fund (FEDER/ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Colloidal route towards sodium ionic conductor (NASICON) 3D complex solid electrolyte structures fabricated by direct ink writing (DIW)

  • Urra Sánchez, Oxel
  • Ferrari, Begoña
  • Sánchez-Herencia, A. Javier
  • Franchin, G.
  • Colombo, P.
Progressing towards a sustainable energy model, safer new generation high-performance energy storage devices with large energy density and power are needed. In this sense, the improvement in terms of efficiency and sustainability has led to the interest in solid-state batteries (SSBs). Lately, sodium-ion batteries (SIBs) have become an emerging alternative due to the abundance of raw materials, low cost, and improvements in terms of fast sodium-ion conductor solid electrolytes (SCSEs). Among all the SCSEs, the sodium superionic conductor (NASICON) type electrolyte is one of the most well-known electrolytes, being widely developed in terms of synthesis and materials. However, the processing and manufacturing of these electrolytes have gone almost unnoticed, without considering that well-designed structures of electrodes/electrolytes are the bridge toward turning advanced energy materials into high-performance devices. This work presents the fabrication of 3D complex structures based on NASICON sodium solid electrolytes, obtained for the first time by direct ink writing (DIW). Through a colloidal route, fine NASICON phase powder with high pureness was prepared, enabling the manufacturing of intricate NASICON-printed electrolytes in a one-step fabrication process. By optimizing the ink, a dense electrolyte layer, acting as an ionic conductor and separator, was inserted between two complex porous pattern layers obtaining a device with a total height below 1.15 mm. Further, the densification of the 3D electrolyte was enhanced, reaching high ionic conductivities at room temperature (3.10−4 S cm−1). Thus, a high-performance sodium ion conductor NASICON solid electrolyte with shorter diffusion pathways and larger interfacial surface areas between electrode/electrolyte was obtained, improving the overall electrochemical performance of the device by a 3D layer-by-layer design. © 2024 The Authors, This work has been supported by the Spanish Government (Agencia Estatal de Investigacion) through the projects PID2022-137274NB-C31/AEI/10.13039/501100011033/FEDER, UE and TED2021-129920B-C41/AEI/10.13039/501100011033/Union Europea Next Generation EU/PRTR. The authors are grateful to the JECS Trust for funding the visit of Oxel Urra to the University of Padova from September to December 2022 (Contract 2022306) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning Biodegradation and Physicochemical Features of PLA/HAp Biomaterials by Incorporating Nanofibrillated Cellulose Through a Colloidal Processing Route

  • Juan Cano, María Eugenia
  • González Granados, Zoilo
  • Rincón, Esther
  • Sánchez-Herencia, A. Javier
  • Ferrari, Begoña
  • Ferrández-Montero, Ana
Biomaterials play a fundamental role in providing a porous structure that mimics the natural structure of human bone and serves as a support while tissue regenerates. With the use of biodegradable materials, it is possible to avoid unnecessary second surgeries for implant removal. The main objective of this article has been focused on modifying the degradation rate of a biodegradable composite material based on polylactic acid (PLA) reinforced with hydroxyapatite (HAp) by incorporating nanofibrillated cellulose (NFC), capable of tuning the porosity within the matrix. To introduce NFC into the composite material, a colloidal processing approach was chosen to improve and ensure its compatibility with the polymeric matrix. The incorporation of different ratios of NFC generally decreases the mechanical properties, but by adjusting the ratio of HAp/NFC content, this parameter is normalized. The hydrophilicity of the composite is improved by HAp/NFC incorporation, and degradation tests confirm that an increase in the percentage of NFC in the matrix is directly proportional to an increase in the degradation rates of the material. These results represent a significant improvement in personalized medicine, where the design of biodegradable biomaterials with hierarchical and controlled porosity opens new paths in the development of therapies and treatments personalized for each patient., This work was supported by Comunidad de Madrid under the project 2022-T1/IND-23973 granted by “Atracción de Talento” program, and by the Spanish Government (Agencia Estatal de Investigación) through the projects PID2022-137274NB-C31 (3DPOSTPERFORM) cofunded by AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR). Additionally, this research was supported by TED2021-129920B-C41,C42 and CPP2023-010820 funded by MICIU/AEI/10.13039/501100011033 and the European Union “NextGenerationEU/PRTR”., Peer reviewed