Pasar al contenido principal

USO DE CO2 E H2 PARA PRODUCIR METANOL VIA REACTORES MEJORADOS DE ADSORCION

PID2022-139819OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Otros (Other)

New catalysts and reactors for the synthesis or conversion of methanol

  • Soler, Jaime
Energy storage is a critical issue in the development of an economy based on the use of renewable energy. A suitable method for storing large amounts of energy for long periods of time is to transform electrical energy from renewable sources into fuels, which leads to so-called “e-fuels”. Several processes are currently used to produce e-fuels, mostly on a laboratory or pilot plant scale, although several demonstration projects with capacities of several MW are already under development...
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Proof of concept for a sorption-enhanced reactor with continuous sorbent feeding (CSF): application to green methanol production

  • González-Pizarro, R.
  • Lasobras, J.
  • Soler, J.
  • Herguido, J.
  • Menéndez, M.
A new reactor for process intensification using sorption enhanced reaction is described. The novelty compared with most experimental work is that a continuous sorbent feeding (CSF) provides a steady state operation. The sorbent increases the reaction rate of a reversible reaction. The reactor is based on the phenomena of segregation of solids in fluidized bed reactors by using a catalyst and a sorbent. Under certain conditions of density and particle size, the two solids segregate and the sorbent may be removed from the bed with only a small content of catalyst. The system has been experimentally tested in the hydrogenation of CO2 to methanol, using a zeolite as sorbent. A significant increase in CO2 conversion was achieved compared with the same reactor without sorbent.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning e-fuel selectivity in sorption-enhanced CO2 hydrogenation over In2O3/ZrO2: The effect of LTA and FAU zeolites

  • González-Pizarro, R.
  • Calero-Berrocal, R.
  • Lasobras, J.
  • Renda, S.
  • Rodríguez-Pardo, M.R.
  • Soler, J.
  • Menéndez, M.
  • Herguido, J.
The e-fuels synthesis via CO2 hydrogenation and the Sorption Enhanced Reaction technology are captivating strategies for CO2 utilization and the integration of renewable energy sources. This study focuses on enhancing the conversion of CO2 over an In2O3/ZrO2 catalyst by incorporating LTA zeolites (3A and 4A) and a FAU zeolite (13X). Key operational parameters, such as temperature (T), Gas Hour Space Velocity (GHSV), type of zeolite, and Zeolite: Catalyst mass ratio (Z/C), were systematically varied. LTA zeolites (3A and 4A) provided the highest CO2 conversions. The introduction of a water-adsorbing solid into the reactor significantly altered the products yield and selectivity. While the selectivity towards CH4, CH3OH, and C2H6O appeared to lay on the type of zeolite, the selectivity towards CO remained unaffected. Zeolite 3A demonstrated the greatest enhancement in selectivity towards CH4 and CH3OH, whereas the synthesis of C2H6O was favored by zeolites 4A and 13X. The Zeolite:Catalyst mass ratio also played a crucial role in process performance, influencing both CO2 conversion and product selectivity. Increasing this ratio improved CO2 conversion and reduced CO selectivity under all operating conditions, while CH4 selectivity increased. However, the selectivity toward CH3OH and C2H6O exhibited an anomalous and complementary behavior. While a maximum was observed for DME, a minimum was registered in methanol production, suggesting a dependency of the dehydration reaction kinetics on the amount of water produced during the reaction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low loading copper-based catalysts for effective CO2 hydrogenation to methanol

  • González-Pizarro, R.
  • Renda, S.
  • Lasobras, J.
  • Soler, J.
  • Menéndez, M.
  • Herguido, J.
Methanol synthesis via CO2 hydrogenation is an emerging Power-to-Liquid (PtL) technology aimed to accelerate the energy transition and the defossilization of key sectors, particularly maritime transport. This study focuses on the study of low loading formulations, to minimize the catalyst cost. Key operational variables including temperature (T), Weight Hourly Space Velocity (WHSV), copper and zinc loadings, and aging state were systematically varied. An overall active phase loading of 10 %wt emerged as optimal. Within this total loading, a 5 %wtCu-5 %wtZn/ZrO2 catalysts delivered higher methanol productivity than 10 %wtCu/ZrO2; however, the bimetallic catalysts showed pronounced deactivation under water-rich atmospheres, establishing 10 %wtCu/ZrO2 as the most promising catalysts. Operating temperature and WHSV exerted a strong, synergistic influence on CH3OH formation; in particular, increasing WHSV shifted the reaction away from thermodynamic control and boosted methanol synthesis. Finally, the catalytic performance of these low-loading catalysts was benchmarked against high-copper-loading methanol catalysts reported in the literature by critically compare their activities as a function of the residence time (τ) calculated at reaction conditions. This assessment revealed that the proposed formulation is highly competitive when compared to most conventional formulation, with a maximum methanol space time yield (STYCH3OH) of 3.9 gCH3OH gCu-1 h-1. This comparison confirms that the catalysts proposed in this study could offer a remarkably more efficient use of the active phase than the conventional high-copper-loading catalysts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Overcoming thermodynamic limitations of the low-temperature reverse water-gas shift in a sorption-enhanced fluidized bed reactor with continuous sorbent feeding and separation (SEFBR + CSF)

  • González-Pizarro, R.
  • Lasobras, J.
  • Renda, S.
  • Soler, J.
  • Menéndez, M.
  • Herguido, J.
This work presents a novel approach for intensifying the reverse water gas shift (rWGS) reaction by integrating an advanced fluidized-bed reactor design with a continuous solid sorbent feeding/separation strategy. The proposed Sorption Enhanced Fluidized Bed Reactor combined with Continuous Sorbent Feeding and Separation (SEFBR + CSF) enables continuous operation while maintaining the intensification effect traditionally associated with temporal-limited sorption-enhanced processes. This configuration externalizes the regeneration of the water-adsorbing zeolite, which is continuously and selectively withdrawn from the reactor in a partially or fully saturated state and replaced with regenerated material, thereby sustaining the sorption capacity throughout operation. Process intensification was experimentally demonstrated in the SEFBR + CSF configuration, which achieved CO yields significantly higher than those obtained in the conventional fluidized-bed reactor (cFBR). During the interval in which continuous sorbent feeding was applied, CO production surpassed the thermodynamic equilibrium limit at operating temperatures between 260 and 300 °C. When compared with literature data under similar conditions, the proposed system exhibited superior CO yields, particularly in the low-temperature regime where conventional LT-rWGS performance is typically limited. Overall, the SEFBR + CSF system represents a promising pathway for continuous sorption-enhanced operation, providing improved efficiency and enabling the process to exceed the equilibrium constraints of the LT-rWGS reaction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sorption Enhanced reverse Water Gas Shift (SErWGS): Optimal potassium-driven methanol suppression and zeolite type selection (LTA and FAU) under high-pressure conditions

  • González-Pizarro, R.
  • Renda, S.
  • Lasobras, J.
  • Soler, J.
  • Menéndez, M.
  • Herguido, J.
CO hydrogenation is thermodynamically and kinetically more favorable than direct CO2 hydrogenation, making a preceding CO2-to-CO conversion step an attractive route for enhancing e-fuel production. In this work, intensified e-syngas production via high-pressure CO2 hydrogenation was investigated through the Sorption-Enhanced Reverse Water-Gas Shift (SErWGS) process. Particular attention was given to methanol suppression through the incorporation of low potassium loadings in the catalyst, and to the influence of zeolite type on process performance. The effect of potassium loading on catalytic activity and CH3OH inhibition was systematically evaluated under different temperatures and WHSV values using a Design of Experiments (DoE) methodology, which enabled the development of empirical models describing the process behavior and identification of the optimal catalyst formulation. In parallel, the performance of different zeolite adsorbents was assessed to maximize H2O removal and process intensification. The optimized catalyst, containing 1.5 wt% K, effectively suppressed methanol formation while maximizing CO production. The intensified SErWGS process achieved CO yields exceeding the thermodynamic equilibrium limit at the operating temperature. H2/CO ratios approaching those expected for complete CO2-to-CO conversion, and pre-breakthrough periods accounting for up to 80% of the total cycle duration. The highest CO yield obtained in this work reached 42% at 260 °C using the 3A-LTA zeolite, corresponding to a value approximately 2.5 times higher than that achieved under conventional RWGS conditions. Remarkably, this CO yield was comparable to the thermodynamic equilibrium yield expected at approximately 450 °C in a conventional rWGS process. These results validate that the SErWGS strategy can deliver performance equivalent to operating nearly 200 °C above the actual reaction temperature, highlighting its potential as an effective intensification approach for low-temperature CO2 conversion and sustainable e-syngas production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

LTA and FAU zeolites as water and CO₂ sorbents for sorption-enhanced CO₂ hydrogenation (SECO2H): Low-pressure sorption-enhanced methanol synthesis as a case study

  • González-Pizarro, R.
  • Mercader, V.D.
  • Durán, P.
  • Renda, S.
  • Soler, J.
  • Peña, J.A.
  • Menéndez, M.
  • Herguido, J.
The selection of the zeolite used in a sorption enhanced CO2 hydrogenation process (SECO2H) plays a decisive role in determining the extent of process intensification and the resulting product yields. This selection is governed by several key properties, including zeolite acidity, pore aperture, adsorption capacity, and the selective adsorption of the target reaction product. Among the zeolites investigated, namely 3 A, 4 A, 5 A (LTA framework), and 13X (FAU framework), the last one exhibited the highest CO2 and H2O adsorption capacities. However, LTA-3A provided the highest selectivity and affinity towards H2O adsorption. H2O adsorption also appeared stronger than CO2 adsorption, as complete H2O desorption and zeolite regeneration required more severe desorption conditions than those needed for CO2 removal. Sorption-enhanced methanol synthesis (SEMS) was selected as the target reaction to evaluate the effect of these zeolites on CO2 hydrogenation. Among all the materials studied, only LTA-3A provided a pronounced intensification of the process, increasing both CH3OH and CO yields due to its highly selective H2O adsorption. The SEMS experiments assisted by LTA-3A delivered yields above the conventional thermodynamic limits of the conventional process and outperformed reported values under comparatively mild operating conditions.