Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physicochemical properties of La0.5Ba0.5Co1-xFexO3-o (0 &lt, = x &lt, = 1) as positrode for proton ceramic electrochemical cells

  • Wachowski, Sebastian L.
  • Szpunar, Iga
  • Pospiech, Joanna
  • Balcerzak, Daria
  • Mielewczyk-Gryn, Aleksandra
  • Nadolska, Malgorzata
  • Vollestad, Einar
  • Gazda, Maria
  • Strandbakke, Ragnar
  • Norby, Truls
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] We report on essential properties of materials in the series La0.5Ba0.5Co1-xFexO3-delta as positrodes for proton ceramic electrochemical cells (PCECs). The unit cell and thermochemical expansion coefficient (TCEC) of these cubic perovskites decrease with iron content x, the TCEC of La0.5Ba0.5FeO3-delta going as low as 1110(-6) 1/K. The materials behave as LaMO3 perovskites with small band gaps and Ba acting as acceptors compensated by electron holes and oxygen vacancies. The electrical properties are dominated by p-type conduction with high large polaron mobilities for the Co-rich compositions at low temperatures, shifting towards small polaron mobilities with increasing Fe content. X-ray absorption spectroscopy (XAS) shows that Co is in a high spin state and takes on the main part of the cation oxidation state changes, and that hole states are in orbitals overlapping with the O 2p states, confirming the large polaronic behaviour, while holes on Fe are more localised at the cation. Hydration is more pronounced in inert atmospheres, as hydration of oxygen vacancies is easier than hydrogenation and increases with Fe content, in line with the commonly accepted finding that delocalization of holes disfavours protonation. Fe-rich compositions benefit from lower TCEC and higher hydration and hence expected proton permeability, at the cost of lower electronic conductivity. The surfaces are hydrophobic irrespective of Fe content, suggesting weak chemisorption of the underlaying water layer, possibly giving relatively many available surface sites for oxygen adsorption, but limited surface proton conductance - both of importance to positrodes for operando PCECs., This work is financed by The Research Council of Norway (Grant no 299736 "FunKeyCat") through the M-ERA.NET Joint Call 2018, and through project FunKey Cat supported by the National Science Centre, Poland under the M-ERA.NET 2, which has received funding from the European Union's Horizon 2020 research and innovation program under Grant agreement No 685451. Also M-ERA.NET in Spain and Spanish Ministry of Science and Innovation through the PCIN-2017-125, PIE 20238AT016, and RYC2021-033889-I funding is kindly acknowledged. We acknowledge the Solaris National Radiation Centre Poland for access to the XAS/PEEM beamline (proposal ID 191011) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the Dynamics of Nanoparticle Formation and Evolution in Functional Oxides via In Situ SAXS/WAXS

  • Elena
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Haas, Sylvio
  • Solis, Cecilia
[EN] The formation and evolution of nanoparticles on the surface of oxide catalysts are essential for determining their catalytic performance. Establishing a direct relationship between structure and function requires real-time in situ characterization under operational conditions. Multiple techniques can be used to create catalytically active nanoparticles on catalyst surfaces, including traditional deposition or infiltration methods and novel techniques such as exsolution, which allows the in situ growth of stable particles. In this study, we report the first in situ Small-Angle and Wide-Angle X-ray Scattering (SAXS/WAXS) investigation of Ni nanoparticle formation in La0.85Sr0.15Cr0.8Ni0.2O3-delta (LSCN), where particles emerge via exsolution, and in a reference La0.85Sr0.15CrO3-delta sample with infiltrated Ni (LSC+5N), at synchrotron facilities. The results reveal early nucleation and thermal evolution with high sensitivity and statistical robustness. By tracking nanoparticle formation and evolution during reduction at increasing temperatures, SAXS provides a complementary tool to conventional techniques such as XRD and electron microscopy for real-time monitoring. This study establishes SAXS/WAXS as a powerful and innovative tool for investigating nanoscale processes in functional ceramic materials, offering new insights into the design of stable and active nanostructured catalysts., The authors acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for providing experimental facilities. SAXS-WAXS measurements were performed at P62 (beamtime allocated for proposal I-20240066 EC) and high energy XRD measurements were performed at P07 (Petra III). We also extend our appreciation to the Electron Microscopy Service of the Universitat Politecnica de Valencia and to Ana Maria Garcia Castillo for her thoughtful help with image editing. Financial support from the Spanish National Research Council (CSIC) through the project PIE 20238AT016 and to the Spanish Government through the CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, are also acknowledged. Open access funding enabled and organized by Projekt DEAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In situ high temperature X-ray diffraction and dilatometric analysis of CGO-Cu composites for solid oxide devices

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Fabuel Robledo, Maria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Kriele, A.
  • Stark, A.
  • Solis, C.
[EN] Understanding the thermo-mechanical compatibility of composite electrodes is essential for the long-term reliability of solid-oxide electrochemical devices. In this study, we demonstrate a combined in situ synchrotron X-ray diffraction (XRD) and simultaneous dilatometry approach as a rapid and predictive method to quantify both phase-resolved and bulk thermal expansion while tracking microstructural evolution at operational temperatures. Ce0.8Gd0.2O2-delta-Cu (CGO-Cu) composites with varying CGO: Cu ratios (39:61-70:30 vol%) were synthesized as potential anode materials compatible with CGO electrolytes up to 800 degrees C. In situ XRD confirmed only the CGO and Cu phases, with Rietveld refinement revealing a slight lattice expansion and reduced CGO crystallite size with increasing CGO content. Concurrent dilatometry indicated systematic changes in the macroscopic thermal expansion and densification behavior, which correlated with the phase and microstructural evolution observed during heating. The CGO-Cu (59:41) composite exhibited a nearly temperature-independent coefficient of thermal expansion consistent with the rule-of-mixtures predictions and minimal high-temperature shrinkage. These findings validate the combined in situ synchrotron XRD + dilatometry methodology as a powerful approach for characterizing and capturing the TEC characteristics of cermets, and for guiding the design of thermomechanically compatible oxide-metal composites for high temperature electrochemical applications., Open Access funding enabled and organized by Projekt DEAL. This research was supported by the Deutsches Elektronen-Synchrotron (DESY, Hamburg, Germany), which provided synchrotron radiation beam time (proposal I-20220786 EC); by the European Union s Horizon 2020 Research and Innovation Program under the CO2SMOS project (grant agreement N° 101000790); by the Spanish Government through the CEX2021-001230-S grant funded by MCIN/AEI/https://doi.org/10.13039/501100011033); and by the Spanish National Research Council (CSIC) under the project PIE 20238AT016.