Pasar al contenido principal

Movilidad en la ciudad del futuro. Preparar a las ciudades para la nueva movilidad 2030 a través de las 4 universidades politécnicas españolas. METROPOLIS

PLEC2021-007609

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2021
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIO CENTRE D INNOVACIO I TECNOLOGIA DE LA UNIVERSITAT POLITECNICA DE CATALUNYA (CIT-UPC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Schedulability analysis of dynamic priority real-time systems with contention

  • Guasque Ortega, Ana|||0000-0002-2900-8466
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Crespo, Alfons|||0000-0002-6606-7406
  • Aceituno-Peinado, José María
[EN] In multicore scheduling of hard real-time systems, there is a significant source of unpredictability due to the interference caused by the sharing of hardware resources. This paper deals with the schedulability analysis of multicore systems where the interference caused by the sharing of hardware resources is taken into account. We rely on a task model where this interference is integrated in a general way, without depending on a specific type of hardware resource. There are similar approaches but they consider fixed priorities. The schedulability analysis is provided for dynamic priorities assuming constrained deadlines and based on the demand bound function. We propose two techniques, one more pessimistic than the other but with a lower computational cost. We evaluate the two proposals for different task allocators in terms of the increased estimated utilization. The results show that both bounds are valid for ensuring schedulability although, as expected, one is tighter than the other. The evaluation also serves to compare allocators to see which one produces less interference., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. his work was supported under Grant PLEC2021-007609 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interference-Aware Schedulability Analysis and Task Allocation for Multicore Hard Real-Time Systems

  • Aceituno-Peinado, José María
  • Guasque Ortega, Ana|||0000-0002-2900-8466
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] There has been a trend towards using multicore platforms for real-time embedded systems due to their high computing performance. In the scheduling of a multicore hard real-time system, there are interference delays due to contention of shared hardware resources. The main sources of interference are memory, cache memory, and the shared memory bus. These interferences are a great source of unpredictability and they are not always taken into account. Recent papers have proposed task models and schedulability algorithms to account for this interference delay. The aim of this paper is to provide a schedulability analysis for a task model that incorporates interference delay, for both fixed and dynamic priorities. We assume an implicit deadline task model. We rely on a task model where this interference is integrated in a general way, without depending on a specific type of hardware resource. There are similar approaches, but they consider fixed priorities. An allocation algorithm to minimise this interference (Imin) is also proposed and compared with existing allocators. The results show how Imin has the best rates in terms of percentages of schedulability and increased utilisation. In addition, Imin presents good results in terms of solution times., This work was supported under Grant PLEC2021-007609 funded by MCIN/ AEI/ 10.13039/ 501100011033 and by the "European Union NextGenerationEU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimized scheduling of periodic hard real-time multicore systems

  • Aceituno-Peinado, José María
  • Pomante, Luigi
  • Guasque Ortega, Ana|||0000-0002-2900-8466
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
[EN] Multicore systems were developed to provide a substantial performance increase over mono-core systems. But shared hardware resources are a problem as they add unpredictable delays that affect the schedulability of multicore hard real-time systems. In recent years much effort has been put into modelling interference and proposing scheduling techniques to mitigate its negative effect. Using one of these models, we propose a scheduling technique, based on Integer Linear Programming (ILP) that, in combination with a task to core allocator, not only achieves a feasible schedule but also reduces the interference produced by shared hardware resources in the context of hard real-time multicore systems. The evaluation shows how interference is reduced (approximate to 83.47%) and schedulability is increased (approximate to 12.25%) compared to traditional heuristics., This work was supported in part by Ministerio de Ciencia e Innovacion (MCIN)/Agencia Estatal de Investigacion (AEI)/10.13039/501100011033 under Grant PLEC2021-007609, in part by the European Union NextGeneration EU/Plan de Recuperacion, Transformaciony Resiliencia (PRTR) [MOBILITY IN THE CITY OF THE FUTURE. PREPARING CITIES FOR THE NEW 2030 MOBILITYTHROUGH THE 4 SPANISH POLYTECHNIC UNIVERSITIES (METROPOLIS)], and in part by MCIN/AEI/10.13039/501100011033/[Modelos y plataformas para sistema informaticos industriales predecibles, seguros y confiables (PRESECREL)] under Grant PID2021124502OB-C41.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Investigación de nuevas metodologías para la planificación de sistemas de tiempo real multinúcleo mediante técnicas no convencionales

  • Aceituno Peinado, José María
[ES] Los sistemas de tiempo real se caracterizan por exigir el cumplimento de unos requisitos temporales que garanticen el funcionamiento aceptable de un sistema. Especialmente, en los sistemas de tiempo real estricto estos requisitos temporales deben ser inviolables. Estos sistemas suelen aplicarse en áreas como la aviación, la seguridad ferroviaria, satélites y control de procesos, entre otros. Por tanto, el incumplimiento de un requisito temporal en un sistema de tiempo real estricto puede ocasionar un fallo catastrófico. La planificación de sistemas de tiempo real es una área en la que se estudian y aplican diversas metodologías, heurísticas y algoritmos que intentan asignar el recurso de la CPU sin pérdidas de plazo. El uso de sistemas de computación multinúcleo es una opción cada vez más recurrente en los sistemas de tiempo real estrictos. Esto se debe, entre otras causas, a su alto rendimiento a nivel de computación gracias a su capacidad de ejecutar varios procesos en paralelo. Por otro lado, los sistemas multinúcleo presentan un nuevo problema, la contención que ocurre debido a la compartición de los recursos de hardware. El origen de esta contención es la interferencia que en ocasiones ocurre entre tareas asignadas en distintos núcleos que pretenden acceder al mismo recurso compartido simultáneamente, típicamente acceso a memoria compartida. Esta interferencia añadida puede suponer un incumplimiento de los requisitos temporales, y por tanto, la planificación no sería viable. En este trabajo se proponen nuevas metodologías y estrategias de planificación no convencionales para aportar soluciones al problema de la interferencia en sistemas multinúcleo. Estas metodologías y estrategias abarcan algoritmos de planificación, algoritmos de asignación de tareas a núcleos, modelos temporales y análisis de planificabilidad. El resultado del trabajo realizado se ha publicado en diversos artículos en revistas del área. En ellos se presentan estas nuevas propuestas que afrontan los retos de la planificación de tareas. En la mayoría de los artículos presentados la estructura es similar: se introduce el contexto en el que nos situamos, se plantea la problemática existente, se expone una propuesta para solventar o mejorar los resultados de la planificación, después se realiza una experimentación para evaluar de forma práctica la metodología propuesta, se analizan los resultados obtenidos y finalmente se exponen unas conclusiones sobre la propuesta. Los resultados de las metodologías no convencionales propuestas en los artículos que conforman esta tesis muestran una mejora del rendimiento de las planificaciones en comparación con algoritmos clásicos del área. Especialmente la mejora se produce en términos de disminución de la interferencia producida y mejora de la tasa de planificabilidad., [CA] Els sistemes de temps real es caracteritzen per exigir el compliment d'uns requisits temporals que garantisquen el funcionament acceptable d'un sistema. Especialment, en els sistemes de temps real estricte aquests requisits temporals han de ser inviolables. Aquests sistemes solen aplicar-se en àrees com l'aviació, la seguretat ferroviària, satèl·lits i control de processos, entre altres. Per tant, l'incompliment d'un requisit temporal en un sistema de temps real estricte pot ocasionar un error catastròfic. La planificació de sistemes de temps real és una àrea en la qual s'estudien i apliquen diverses metodologies, heurístiques i algorismes que intenten assignar el recurs de la CPU sense pèrdues de termini. L'ús de sistemes de computació multinucli és una opció cada vegada més recurrent en els sistemes de temps real estrictes. Això es deu, entre altres causes, al seu alt rendiment a nivell de computació gràcies a la seua capacitat d'executar diversos processos en paral·lel. D'altra banda, els sistemes multinucli presenten un nou problema, la contenció que ocorre a causa de la compartició dels recursos de hardware. L'origen d'aquesta contenció és la interferència que a vegades ocorre entre tasques assignades en diferents nuclis que pretenen accedir al mateix recurs compartit simultàniament, típicament accés a memòria compartida. Aquesta interferència afegida pot suposar un incompliment dels requisits temporals, i per tant, la planificació no seria viable. En aquest treball es proposen noves metodologies i estratègies de planificació no convencionals per aportar solucions al problema de la interferència en sistemes multinucli. Aquestes metodologies i estratègies comprenen algorismes de planificació, algorismes d'assignació de tasques a nuclis, models temporals i anàlisis de planificabilitat. El resultat del treball realitzat s'ha publicat en diversos articles en revistes de l'àrea. En ells es presenten aquestes noves propostes que afronten els reptes de la planificació de tasques. En la majoria dels articles presentats l'estructura és similar: s'introdueix el context en el qual ens situem, es planteja la problemàtica existent, s'exposa una proposta per a solucionar o millorar els resultats de la planificació, després es realitza una experimentació per a avaluar de manera pràctica la metodologia proposada, s'analitzen els resultats obtinguts i finalment s'exposen unes conclusions sobre la proposta. Els resultats de les metodologies no convencionals proposades en els articles que conformen aquesta tesi mostren una millora del rendiment de les planificacions en comparació amb algorismes clàssics de l'àrea. Especialment, la millora es produeix en termes de disminució de la interferència produïda i millora de la taxa de planificabilitat., [EN] Real-time systems are characterised by the demand for temporal constraints that guarantee acceptable operation and feasibility of a system. Especially, in hard real-time systems these temporal constraints must be respected. These systems are typically applied in areas such as aviation, railway safety, satellites and process control, among others. Therefore, a missed deadline in a hard-real time system can lead to a catastrophic failure. The scheduling of real-time systems is an area where various methodologies, heuristics and algorithms are studied and applied in an attempt to allocate the CPU resources without missing any deadline. The use of multicore computing systems is an increasingly recurrent option in hard real-time systems. This is due, among other reasons, to its high computational performance thanks to the ability to run multiple processes in parallel. On the other hand, multicore systems present a new problem, the contention that occurs due to the sharing of hardware resources. The source of this contention is the interference that sometimes happens between tasks allocated in different cores that try to access the same shared resource simultaneously, typically shared memory access. This added interference can lead to miss a deadline, and therefore, the scheduling would not be feasible. This paper proposes new non-conventional scheduling methodologies and strategies to provide solutions to the interference problem in multicore systems. These methodologies and strategies include scheduling algorithms, task allocation algorithms, temporal models and schedulability analysis. The results of this work have been published in several journal articles in the field. In these articles the new proposals are presented, they face the challenges of task scheduling. In the majority of these articles the structure is similar: the context is introduced, the existing problem is identified, a proposal to solve or improve the results of the scheduling is presented, then the proposed methodology is experimented in order to evaluate it in practical terms, the results obtained are analysed and finally conclusions about the proposal are expressed. The results of the non-conventional methodologies proposed in the articles that comprise this thesis show an improvement in the performance of the scheduling compared to classical algorithms in the area. In particular, the improvement is produced in terms of reducing the interference and a higher schedulability rate., Esta tesis se ha realizado en el marco de dos proyectos de investigación de carácter nacional. Uno de ellos es el proyecto es PRECON-I4. Consiste en la búsqueda de sistemas informáticos predecibles y confiables para la industria 4.0. El otro proyecto es PRESECREL, que consiste en la búsqueda de modelos y plataformas para sistemas informáticos industriales predecibles, seguros y confiables. Tanto PRECON-I4 como PRESECREL son proyectos coordinados financiados por el Ministerio de Ciencia, Innovación y Universidades y los fondos FEDER (AEI/FEDER, UE). En ambos proyectos participa la Universidad Politécnica de Valencia, la Universidad de Cantabria y la Universidad Politécnica de Madrid. Además, en PRESECREL también participa IKERLAN S. COOP I.P. Además, parte de los resultados de esta tesis también han servido para validar la asignación de recursos temporales en sistemas críticos en el marco del proyecto METROPOLIS (PLEC2021-007609).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation and comparison of integer programming solvers for hard real-time scheduling

  • Guasque Ortega, Ana|||0000-0002-2900-8466
  • Balbastre, Patricia|||0000-0001-9458-4083
[EN] In order to obtain a feasible schedule of a hard real-time system, heuristic based techniques are the solution of choice. In the last few years, optimization solvers have gained attention from research communities due to their capability of handling large number of constraints. Recently, some works have used integer linear programming (ILP) for solving mono processor scheduling of real-time systems. In fact, ILP is commonly used for static scheduling of multiprocessor systems. However, two main solvers are used to solve the problem indistinctly. But, which one is the best for obtaining a schedulable system for hard real-time systems? This paper makes a comparison of two well-known optimization software packages (CPLEX and GUROBI) for the problem of finding a feasible schedule on monoprocessor hard real-time systems., This work was supported under Grant PLEC2021-007609 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGeneration EU/PRTR"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Virtualization Technology for Dependable Embedded Systems: A Survey for Transportation and Industrial Domains

  • Pérez-Cerrolaza, Jon
  • Mezzetti, Enrico
  • Gonzalez-Eguiluz, Jon
  • Martín-Acosta, Miguel
  • Lefebvre, Charles-Alexis
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] Next-generation transportation and industrial systems are characterized by a continuously increasing number of integrated software functionalities and computational performance requirements. Nevertheless, there is also a need to reduce the cost, number, size, power consumption, volume and weight of integrated dependable embedded systems. In this context, virtualization technology enables the reconciliation of these challenges supporting the integration of multiple software functionalities of mixed-criticality (real-time and non-real-time, safety and non-safety-related) on a single computing device. This survey provides an overview of virtualization solutions (hypervisors, microkernels, and separation kernels) and categorizes research contributions addressing virtualization, real-time, dependability, and domain-specific technological challenges., This work has been partially supported by European Research Council with Horizon 2020 (grant agreement No. 101082622), the Spanish Ministry of Science and Innovation (grant agreements No. PID2019-107255GB-C21, PID2021-124502OB-C41), and by grant PLEC2021-007609 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR .
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

UWB microwave functional brain activity extraction for Parkinson's disease monitoring

  • Akazzim, Youness|||0000-0002-7957-4044
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • El Mrabet, Otman
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Microwaves have proven their imaging capabilities to visualize the body composition for medical applications, thanks to their penetration inside biological structures. In this context, this article presents a novel methodology that aims to extract not just the internal morphology, but also the brain’s functional activity using the UWB pulse amplitude modulation (PAM) technique to have simultaneously functional monitoring and imaging capability and apply it to monitor the Parkinson’s disease (PD). The radio-frequency system is composed of two orthogonal sets of double UWB probes operating in the frequency range of 0.5–1.5 GHz. An experimental setup has been devised that avoids complex in vivo testing, albeit allows a system proof-of-concept validation. A bio-tag (BT) consisting of an optically modulated photodiode is used to emulate local medium changes associated with cell activity. The proposed system is used to first extract the modeled brain action potential (AP) to validate the performance of the BT and then to monitor the PD based on the beta frequency band character within basal ganglia–thalamocortical (BGTC) which is a key marker for the PD. The results show a good capability of locating and differentiating the signals generated within the phantom by the BT, alternatively emulating the healthy and PD’s state, based on the frequency. The obtained results of the functional monitoring technique on distinguishing the healthy from nonhealthy brain model activity, as well as in the phantom mimicking the average proprieties of a human head, will serve as a basis for detecting functional diseases in the future., This work was supported in part by Comision Interministerial de Ciencia y Tecnologia (CICYT) PID2019-107885GB-C31, PID2022-136869NB-C31, Catalan Research Group 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR) under Grant 2021 FISDU 00195; in part by the PDR-2014-2022/56-30157-2021-2A grant of the Generalitat de Catalunya; and in part by the Prueba de Concepto PDC2022-133091-I00 grants of the Ministerio de Ciencia, Innovación y Universidades (Spain)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

3D pain face expression recognition using a ML-MIMO radar profiler

  • López Montero, María José|||0000-0002-2286-7479
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
This study proposes a new method for the detection of facial expressions of pain using a 3D profiler that combines a multiple-input-multiple-output (MIMO) radar system with a machine learning (ML) model (ML-MIMO radar profiler). It offers a solution for pain detection of facial expressions in a non-invasive, non-intrusive, and cost-effective manner. The ML-MIMO radar profiler employs six radars behind a lens to monitor changes in six facial regions and build a 3D facial profile with real-time facial activity information. A dielectric lens was used to ensure an optimal beam size to effectively illuminate each facial region. Signal processing is performed using dynamic time deformation to determine the longitudinal distance and a discrete stationary wavelet transform to filter the signal and improve accuracy. The information from the 3D profiler was compared with the facial action coding system (FACS) to determine actual facial expressions. A machine learning algorithm was trained to learn action units from the FACS and compare them with the information provided by the ML-MIMO radar profiler, thereby performing facial expression classification. In this study, we analyzed four facial expressions: hapiness, sadness, anger, and pain. Identification and classification were performed using a machine-learning model based on multilayer perceptrons. The results revealed 92% accuracy of the system for pain expression, whereas expressions of happiness, sadness, and anger were detected with 88, 86, and 87% accuracy, respectively., This work was supported in part by the Spanish ‘‘Comision Interministerial de Ciencia y Tecnologia’’ (CICYT) under Project PID2019-107885GB-C31, Project PID2022-136869NB-C31, and Project MDM2016-0600; in part by Metropolis under Grant PLEC2021-007609; in part by the Catalan Research Group, Centre Específic de Recerca en Comunicació i Detecció-UPC (CommSensLab-UPC), under Grant 2021 SGR 01415; and in part by the ‘‘Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación’’ (SENESCYT) from the Ecuadorian Government., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Understanding the impact of socio-demographic differences on acceptance of last-mile delivery technologies: a comparative analysis

  • Montero Vega, Mariana
  • Estrada Romeu, Miguel Ángel|||0000-0002-5114-7796
  • Thigulla, Divya Teja
In recent years, we have witnessed the global growth of e-commerce, which has significant implications for last-mile distribution. This study examines the impact of factors such as gender, age, urbanity level, and household size on delivery preferences, including night and weekend deliveries, parcel locker usage, and the acceptance of autonomous delivery robots (ADRs). This study presents findings from a global survey conducted across Europe, Asia, and North America of a total of 1344 responses. The survey focused on the socio-demographic characteristics of users and their preferences for last-mile logistics, including e-commerce platform usage and delivery options. The ordered logit models helped identify significant influences on consumers' delivery choices, offering insights into evolving trends in last-mile logistics and the adoption of new urban logistic initiatives. Key findings include that older individuals are less likely to prefer night deliveries, while employed respondents preferred it. Gender, while not consistently a significant factor in all delivery methods, did influence parcel locker usage and willingness to give personal data. Younger people and those in urban settings show a greater openness to ADRs. Education levels positively influence the use of parcel lockers and the use of faster delivery options. Graphical analysis shows gender-based differences in online shopping habits. The use of commercialization platforms (local shops, international marketplaces, local marketplaces) was largely similar across genders; however, it exhibited more pronounced geographical differences. The overall trend shows an average home availability of between four and five hours per day for home deliveries. The most frequent purchase are food-related products and small deliveries, like books and electronics. These findings reflect potential implications for delivery preferences., The participation of the 2nd author in this paper was part of the project METROPOLIS, financed by MCIN/AEI/10.13039/5011000110 33 and by the European Union “NextGenerationEU”/PRTR., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

GeoLSTM: A road geometry-aware neural network model for spatio-temporal highway traffic speed and intensity forecasting

  • Franco Panadès, Gerard|||0009-0001-7751-2894
  • Llatje i Hierro, Òscar|||0009-0006-6116-2339
  • Pagès Giralt, Laia|||0000-0002-1608-6326
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Accurate prediction of dynamic states in complex physical systems is critical for intelligent decision-support and control. This paper presents a novel spatio-temporal deep learning framework tailored to expert systems operating in mobility and transportation environments. Using a large-scale, multi-source dataset collected over two years from a 100-kilometer highway segment, the proposed model integrates static road geometry features—specifically curvature and slope—into a Long Short-Term Memory (LSTM) architecture. We introduce GeoLSTM, a geometry-aware neural network model that enhances mid-term traffic forecasting accuracy across multiple metrics, including vehicle speed, total intensity and heavy-vehicle (HV) intensity, addressing the common omission of static road geometry by embedding curvature and slope. Our experiments demonstrate that incorporating static spatial features significantly reduces prediction error (up to 26% for speed and 16% for heavy-vehicle intensity) and improves model stability, outperforming both traditional baselines and transformer-based alternatives. We further quantify computational costs to assess real-time deployment feasibility. These results establish a robust methodology for integrating contextual spatial data into deep learning-based expert systems, with potential generalization across other domains requiring predictive modelling in structured, data-rich environments., The first author would like to personally acknowledge the Catalan Traffic Authority and the Industrial Doctorates Plan of the Department of Research and Universities of the Generalitat de Catalunya for supporting with funding the research project which frames this research article, developed in the framework of his PhD thesis. Additional support was provided by the European Institute of Technology (EIT) for funding mobility to attend conferences through the Doctoral Training Network (DTN) organization. Furthermore, the research has also been developed in the context of the following projects: • i-MovE (Interoperabilidad para una Movilidad Eficiente, sEgura y Equitativa) project, funded by TSI-100121-2024-25 and by the EuropeanUnion NextGenerationEU/PRTR; • METROPOLIS project, PLEC2021-007609, funded by MCIN/AEI/ 10.13039/501100011033 and by the EuropeanUnion NextGenerationEU/PRTR; •And the REDES project, aid RED2024-154236-E funded by MICIU/ AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Estimating the optimal number of parcel lockers and their cost structure for last mile distribution: case study in Barcelona, Estimació del nombre òptim de consignes de paquets i la seva estructura de costos per a la distribució d'última milla: estudi de cas a Barcelona

  • Pallarès Salcedo, Biel|||0009-0006-2315-328X
  • Estrada Romeu, Miguel Ángel|||0000-0002-5114-7796
This paper introduces an analytical model designed to optimise the deployment of parcel lockers for last-mile delivery and determine the cost structure for last mile freight distribution. The model minimizes the total costs associated with traditional home delivery and locker delivery strategies. By integrating a grid search method, this model considers operational and user costs, accommodating specific urban characteristics such as varying demand densities and street layouts. A case study conducted in Barcelona validates the model's practical applicability, contrasting two scenarios: a cooperative lockers model where the infrastructure is publicly owned and accessible to all carriers, and a private lockers model where the infrastructure is owned and only used by the largest delivery company in the city. Results demonstrate the significant operational efficiency of the locker proposal, with the mean unit cost for traditional deliveries in Barcelona being 4.77€ per item, and the locker model achieving an average cost reduction of over 75%, resulting in a value of 1.12€ per item. This cost reduction holds across all districts, despite variations in demand densities and street patterns. Additionally, the study reveals that high demand densities notably reduce locker operational costs, making the administration-owned locker strategy the most efficient. Conversely, a private locker model leads to significantly higher costs (15.3%) than the public ones due to split demand and lack of cooperation between retailers., Acknowledgements: The participation of both authors was made possible by the METROPOLIS project, PLEC2021-007609, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Microwave resonant wireless sensor for enhanced particle detection in microfluidic channels

  • Ataa-Allah, Houda
  • Ataa Allah, Fatima
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Aznabet, Mariem
  • El mrabet, Otman
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
This paper presents a highly sensitive microwave sensor for bioparticle detection, designed around a ring-gap resonator integrated with a microfluidic channel. The sensor’s structure is optimized to enhance electric field confinement, improving its sensitivity to dielectric variations. Experimental validation using commercial microbeads as bioparticle models demonstrates clear resonance shifts, confirming the sensor’s capability for precise detection of particles up to 5 µm. These results highlight the potential of the proposed approach for realtime, label-free biosensing applications, offering a promising tool for biomedical diagnostics and analytical chemistry., This work was supported in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR-2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de Investigación, Spain, under Grant CICYT PID2019- 107885GBC31, Grant PID2022-136869NB-C31, and Grant Prueba de Concepto PDC2022-133091-I00; and in part by the Next Generation EU. Additionally, this work is supported by the CNRST as part of the ”PhD-Associate Scholarship – PASS” Program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

OAM antennas for NLOS communications

  • Moriones Galve, Pau
  • Aldana Alonso, Rubén
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Molina García-Pardo, José María
  • Pascual García, Juan
  • Ferrando Bataller, Miguel
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
EM waves carrying orbital angular momentum (OAM) have been investigated in relation to their generation and transmission, with increasing interest in their usage and integration into modern communication systems. In the radio domain, the employment of a uniform circular array (UCA) featuring a consistent phase shift between neighboring elements is the most common technique employed in the literature to generate OAM carrying waves. Although offering an understandable solution, the consistent phase shift may not guarantee pure OAM generation and isolation between the different modes when interested on capacity increase with orthogonal multimodal solutions. In this work, the orientation of the elements in the antenna array is reviewed concerning collinear and radial arrangements of its elements, briefly analyzing the generation and transmission performance of different OAM eigenmodes, prioritizing short-range communication use cases. With respect to the latter, this report also addresses considerations about the performance evaluation of different OAM modes in the absence of clear LOS visibility under the aforementioned geometries., Grants PDR-2014-2022/56-30157-2021-2A, 2021 SGR 01415 Q0818003F, Metropolis PLEC2021-007609, PID2022-136869NB-C31, and PDC2022-133091-I00, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Microwave monitoring of Parkinson disease using a realistic human head model

  • Akazzim, Youness|||0000-0002-7957-4044
  • Gugliermino, Martina
  • Rodríguez Duarte, David Orlando
  • Tobón Vásquez, Jorge Alberto
  • Vipiana, Francesca
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Parkinson's disease (PD) is a widespread neurode-generative disorder characterized by the loss of dopaminergic neurons from the substantia nigra, causing bradykinesia, tremors, rigidity, and postural instability. In this paper, we present a differential microwave imaging study (MWI) for early-stage PD monitoring that uses the dielectric properties of the basal ganglia, particularly the thalamus. The simulations are carried out using two scenarios: one is based on studying the sensitivity of a realistic human head model. The other is the study of differential microwave imaging to monitor the PD based on the dopamine level changes in the basal ganglia. The MWI system contains 24 printed flexible antennas with a custom-made matching medium covering the head model. The obtained results demonstrate that small variations in dielectric properties within the human head, in particular the thalamus, can be detected, which can be used to monitor Parkinson's disease in a very early stage., This work was financially supported in part by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR)(2021 FISDU 00195), PDR-2014-2022/56-30157-2021-2 A grant of the Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 grants of the Ministerio de Ciencia, Innovacion y Universidades (Spain). This work was supported in part by the project PON Research and Innovation “Microwave Imaging and Detection powered by Artificial Intelligence for Medical and Industrial Applications (DM 1062/21)”, funded by MUR. It was carried out partially within the Agritech National Research Center, funded by the Next-Generation EU (PNRR, Missione 4, Componente 2, Investimento 1.4, D.D. 1032 17/06/2022, CN00000022., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessing the viability of parking slot utilization as transhipment points for parcel carriers: a case study in Barcelona

  • Savall Mañó, Maria|||0000-0002-3465-6222
  • Ribas Vila, Immaculada|||0000-0002-3701-118X
The measures proposed in the sustainable and smart mobility strategy developed by the European commission are crucial for achieving the environmental objectives for 2030. This strategy includes measures specifically aimed at reducing the impact of e-commerce distribution. One widely adopted strategy for mitigating the impact of e-commerce distribution is the establishment of urban consolidation centres (UCCs). While this infrastructure quickly demonstrates its environmental success in urban areas, achieving long-term economic sustainability proves challenging. In this paper, we introduce a methodology aimed at incentivizing parcel carriers to shift towards an economically feasible and environmentally sustainable distribution mode within urban areas by leveraging their own transhipment space. This methodology includes a mathematical program for determining the quantity and locations of parking slots, taking into account the number of parcels and transportation vehicles used. It also utilizes the Continuous Approximation technique to assess the transportation and environmental costs of the proposed solutions. The proposed methodology is implemented for the city of Barcelona, considering three different sizes of parcel carriers: the carrier handling the largest volume of parcels, the carrier handling the lowest volume of parcels, and an intermediate case. The vehicles considered for delivery from the transhipment points include vans, cargo bikes, and trolleys for distribution on foot. The results indicate that a significant reduction in both transport and environmental costs is achieved when using zero-emissions vehicles for delivery from transhipment points for any of the parcel carriers considered., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Resonance-based microwave monitoring of live/dead bacteria in a microfluidic channel

  • Ataa-Allah, Houda
  • Aznabet, Mariem
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Akazzim, Youness|||0000-0002-7957-4044
  • El mrabet, Otman
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
In this work, we have studied a highly sensitive microwave sensor for the detection of Escherichia coli (E. coli) bacteria at the single-cell level. The proposed system integrates a microwave sensor with a microfluidic channel for bacteria flow control. The microwave sensor is based on a planar microwave annular ring resonator working around 5GHz. Inside the channel, E. coli bacteria have been modeled using dielectric characteristics present in state-of-the-art literature. To enhance field confinement and achieve the highest electric field strength we have introduced two 50um gaps into the resonator. This approach holds great potential for different applications, including food safety control, healthcare diagnosis, and environmental monitoring, where the ability to detect a single E. coli cell is paramount., This work was financially supported in part by ID2019- 107885GBC31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR) (2021 FISDU 00195), PDR-2014- 2022/56-30157-2021-2 Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 Ministerio de Ciencia, Innovacion y Universidades (Spain)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Magnetoelectric dipole antenna extending NLOS short-distance vehicular communication with orbital angular momentum modes

  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Akazzim, Youness|||0000-0002-7957-4044
  • Towfiq, Asaduzzaman
  • Cetiner, Bedri Artug
  • Blanch Boris, Sebastián|||0000-0002-8757-583X
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
The ability to utilize resources to meet the need of growing diversity in services and user behavior marks the future of cognitive wireless communication systems. Cognitive wireless technologies for vehicular communications, in combination with Orbital Angular Momentum (OAM) modes aim at extending direct Non-Line-Of-Sight (NLOS) short-distance communications for smart mobility. In this regard, OAM antennas need to be developed to support these technologies. To this end, here we describe a compact antenna supporting the first OAM modes. Also, the antenna properties are discussed and are numerically and experimentally validated for OAM modes of l=±1 . Particularly, for the considered OAM modes, the antenna achieves more than 500 MHz operation bandwidth at the frequency of operation of 3.5 GHz. Also, for l=±1 OAM modes, the null beamwidth aligns precisely with the anticipated dimensions theoretically computed., This work was financially supported by PDR-2014-2022/56-30157-2021-2A grant of the Generalitat de Catalunya and by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31 and Prueba de Concepto PDC2022-133091-I00 and Metropolis PLEC2021-007609 grants of the Ministerio de Ciencia, Inno-vación y Universidades (Spain).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Microwave imaging for Parkinson’s disease detection: A phantom-based feasibility study using temperature-controlled dielectric variations

  • Cardinali, Leonardo
  • Rodríguez Duarte, David Orlando
  • Tobón Vásquez, Jorge Alberto
  • Vipiana, Francesca
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Parkinson’s disease (PD) is characterized by pathological changes in the substantia nigra, which in its early stages may manifest as structural and functional asymmetries between the two hemispheres. Microwave imaging has recently emerged as a promising non-invasive tool to detect subtle dielectric variations. In the context of Parkinson’s disease, such contrasts are expected to arise from the underlying physiological alterations in brain tissue, although their magnitude has not yet been fully characterized. In this work, we investigate the feasibility of differential microwave imaging, where detection is based on permittivity contrasts, through a controlled phantom study. A simple two-dimensional head phantom was constructed using a 3D-printed cylindrical container filled with water, incorporating a Teflon tube to represent the substantia nigra. The tube was filled with hot water, whose gradual cooling emulated small dielectric changes. Since the dielectric properties of water vary linearly with temperature over 0.5–3 GHz, we first validated this dependence through both numerical analysis and experimental measurements. Four antennas were then employed in a differential imaging configuration, with image reconstruction performed via the multi-frequency bi-focusing algorithm. The results show that the system can successfully detect a dielectric contrast corresponding to a temperature variation as small as 0.4 °C, equivalent to approximately 0.17% in relative permittivity. While the exact dielectric changes associated with PD remain to be determined, these results demonstrate that the proposed approach is sensitive to very small contrasts, supporting the potential of differential microwave imaging as a candidate tool for future investigations into Parkinson’s disease detection., This work was supported in part by the project “THERAD—Microwave Theranostics for Alzheimer’s Disease”, funded by Compagnia di San Paolo; in part by the project “INSIGHTFOOD—An innovative microwave sensing system for the evaluation and monitoring of food quality and safety”, funded by the Italian Ministry of Foreign Affairs and International Cooperation (MAECI, CUP E13C23000180005); in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR-2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de lnvestigacion, Spain, under Grant CICYT PID2019-107885GBC31, Grant PID2022-136869NB-C31, and Grant Prueba de Concepto PDC2022-133091-IO0; and in part by Next Generation EU. It was carried out partially within the Agritech National Research Center, funded by the European Union Next—Generation EU (Piano Nazionale di Ripresa e Resilienza (PNRR)—MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.4—D.D. 1032 17/06/2022, CN00000022)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High-sensitivity microwave resonator sensor for aqueous glucose detection using field-concentrating elements

  • Ataa Allah, Fatima
  • Ataa-Allah, Houda
  • El mrabet, Otman
  • Aznabet, Mariem
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
In this article, we present a highly sensitive microwave sensor for determining the concentration of aqueous glucose solutions in the microwave regime. The proposed sensor is based on a single split-ring resonator (SRR) printed on a Rogers RO3003 substrate and operates at 2.9 GHz. The sensitivity of this sensor is enhanced by using a narrow gap of approximately 100 µm, which increases the capacitance of the SRR and, more importantly, produces a localized field enhancement within the gap region. Moreover, the proposed design operates with only 2 µL of sample, a notable improvement over sensors that typically require larger liquid volumes. Both the simulation and measurement results showed a clear linear shift in the resonance frequency over a concentration range of 0–400 mg/dL, with the ability to detect minimal concentration variations as small as 50 mg/dL. These results confirm the effectiveness of the sensor for noninvasive glucose detection and represent a significant advancement in the field of microwave sensing., This work was supported in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de Investigación, Spain, under Grant CICYT PID2019-107885GB- C31, PID2022-136869NB-C31 MICIU / AEI / 10.13039 / 501100011033/ FEDER, UE, and Grant Prueba de Concepto PDC2022-133091-I00; and in part by the Next Generation EU. Additionally, this work is supported by the CNRST as part of the ”PhD-Associate Scholarship– PASS” Program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Uncertainty analysis of autonomous delivery robot operations for last-mile logistics in European cities

  • Lemardelé, Clément|||0000-0003-1673-6509
  • Estrada Romeu, Miguel Ángel|||0000-0002-5114-7796
  • Pagès, Laia
Although autonomous delivery robots (ADRs) are widely anticipated to significantly enhance the efficiency of last-mile logistics operations in dense urban environments in the coming years, their impact on logistics service providers’ supply chains has yet to be accurately assessed on a large scale. The primary objective of this article is to quantify the uncertainty in the cost of ADR operations as a function of the stochastic behavior of given input variables. First, ADR operations are modeled using the continuous approximation methodology. The mathematical formulations proposed in this article relate certain ADR and service area input parameters to provide an estimate of the carrier’s last-mile operating costs. An uncertainty analysis based on the Monte Carlo approach is then performed. The numerical results indicate that the implementation of a two-echelon delivery scheme with heavy-duty vehicles cooperating with ADRs through an urban logistics micro-hub would, on average, reduce last-mile operating costs by more than 10% in small and medium-sized European cities, given adequate operational conditions., The first author would like to personally acknowledge CARNET Barcelona for the funding of this research article, developed in the framework of his PhD thesis. The participation of the second author has taken place under the METROPOLIS project, PLEC2021-007609, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The authors also acknowledge the comments of anonymous reviewers, which greatly helped in improving and clarifying the article., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High-sensitivity microwave resonator sensor for aqueous glucose detection using field-concentrating elements

  • Ataa Allah, Fatima
  • Ataa-Allah, Houda
  • El mrabet, Otman
  • Aznabet, Mariem
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
In this article, we present a highly sensitive microwave sensor for determining the concentration of aqueous glucose solutions in the microwave regime. The proposed sensor is based on a single split-ring resonator (SRR) printed on a Rogers RO3003 substrate and operates at 2.9 GHz. The sensitivity of this sensor is enhanced by using a narrow gap of approximately 100 µm, which increases the capacitance of the SRR and, more importantly, produces a localized field enhancement within the gap region. Moreover, the proposed design operates with only 2 µL of sample, a notable improvement over sensors that typically require larger liquid volumes. Both the simulation and measurement results showed a clear linear shift in the resonance frequency over a concentration range of 0–400 mg/dL, with the ability to detect minimal concentration variations as small as 50 mg/dL. These results confirm the effectiveness of the sensor for noninvasive glucose detection and represent a significant advancement in the field of microwave sensing., This work was supported in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de Investigación, Spain, under Grant CICYT PID2019-107885GB- C31, PID2022-136869NB-C31 MICIU / AEI / 10.13039 / 501100011033/ FEDER, UE, and Grant Prueba de Concepto PDC2022-133091-I00; and in part by the Next Generation EU. Additionally, this work is supported by the CNRST as part of the ”PhD-Associate Scholarship– PASS” Program., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

UWB microwave functional brain activity extraction for Parkinson's disease monitoring

  • Akazzim, Youness
  • Palacios Arias, César Augusto
  • Jofre Cruanyes, Marc
  • El Mrabet, Otman
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
Microwaves have proven their imaging capabilities to visualize the body composition for medical applications, thanks to their penetration inside biological structures. In this context, this article presents a novel methodology that aims to extract not just the internal morphology, but also the brain’s functional activity using the UWB pulse amplitude modulation (PAM) technique to have simultaneously functional monitoring and imaging capability and apply it to monitor the Parkinson’s disease (PD). The radio-frequency system is composed of two orthogonal sets of double UWB probes operating in the frequency range of 0.5–1.5 GHz. An experimental setup has been devised that avoids complex in vivo testing, albeit allows a system proof-of-concept validation. A bio-tag (BT) consisting of an optically modulated photodiode is used to emulate local medium changes associated with cell activity. The proposed system is used to first extract the modeled brain action potential (AP) to validate the performance of the BT and then to monitor the PD based on the beta frequency band character within basal ganglia–thalamocortical (BGTC) which is a key marker for the PD. The results show a good capability of locating and differentiating the signals generated within the phantom by the BT, alternatively emulating the healthy and PD’s state, based on the frequency. The obtained results of the functional monitoring technique on distinguishing the healthy from nonhealthy brain model activity, as well as in the phantom mimicking the average proprieties of a human head, will serve as a basis for detecting functional diseases in the future., This work was supported in part by Comision Interministerial de Ciencia y Tecnologia (CICYT) PID2019-107885GB-C31, PID2022-136869NB-C31, Catalan Research Group 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR) under Grant 2021 FISDU 00195; in part by the PDR-2014-2022/56-30157-2021-2A grant of the Generalitat de Catalunya; and in part by the Prueba de Concepto PDC2022-133091-I00 grants of the Ministerio de Ciencia, Innovación y Universidades (Spain)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

3D pain face expression recognition using a ML-MIMO radar profiler

  • López Montero, María José
  • Palacios Arias, César Augusto
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
This study proposes a new method for the detection of facial expressions of pain using a 3D profiler that combines a multiple-input-multiple-output (MIMO) radar system with a machine learning (ML) model (ML-MIMO radar profiler). It offers a solution for pain detection of facial expressions in a non-invasive, non-intrusive, and cost-effective manner. The ML-MIMO radar profiler employs six radars behind a lens to monitor changes in six facial regions and build a 3D facial profile with real-time facial activity information. A dielectric lens was used to ensure an optimal beam size to effectively illuminate each facial region. Signal processing is performed using dynamic time deformation to determine the longitudinal distance and a discrete stationary wavelet transform to filter the signal and improve accuracy. The information from the 3D profiler was compared with the facial action coding system (FACS) to determine actual facial expressions. A machine learning algorithm was trained to learn action units from the FACS and compare them with the information provided by the ML-MIMO radar profiler, thereby performing facial expression classification. In this study, we analyzed four facial expressions: hapiness, sadness, anger, and pain. Identification and classification were performed using a machine-learning model based on multilayer perceptrons. The results revealed 92% accuracy of the system for pain expression, whereas expressions of happiness, sadness, and anger were detected with 88, 86, and 87% accuracy, respectively., This work was supported in part by the Spanish ‘‘Comision Interministerial de Ciencia y Tecnologia’’ (CICYT) under Project PID2019-107885GB-C31, Project PID2022-136869NB-C31, and Project MDM2016-0600; in part by Metropolis under Grant PLEC2021-007609; in part by the Catalan Research Group, Centre Específic de Recerca en Comunicació i Detecció-UPC (CommSensLab-UPC), under Grant 2021 SGR 01415; and in part by the ‘‘Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación’’ (SENESCYT) from the Ecuadorian Government., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Understanding the impact of socio-demographic differences on acceptance of last-mile delivery technologies: a comparative analysis

  • Montero Vega, Mariana
  • Estrada Romeu, Miguel Ángel
  • Thigulla, Divya Teja
In recent years, we have witnessed the global growth of e-commerce, which has significant implications for last-mile distribution. This study examines the impact of factors such as gender, age, urbanity level, and household size on delivery preferences, including night and weekend deliveries, parcel locker usage, and the acceptance of autonomous delivery robots (ADRs). This study presents findings from a global survey conducted across Europe, Asia, and North America of a total of 1344 responses. The survey focused on the socio-demographic characteristics of users and their preferences for last-mile logistics, including e-commerce platform usage and delivery options. The ordered logit models helped identify significant influences on consumers' delivery choices, offering insights into evolving trends in last-mile logistics and the adoption of new urban logistic initiatives. Key findings include that older individuals are less likely to prefer night deliveries, while employed respondents preferred it. Gender, while not consistently a significant factor in all delivery methods, did influence parcel locker usage and willingness to give personal data. Younger people and those in urban settings show a greater openness to ADRs. Education levels positively influence the use of parcel lockers and the use of faster delivery options. Graphical analysis shows gender-based differences in online shopping habits. The use of commercialization platforms (local shops, international marketplaces, local marketplaces) was largely similar across genders; however, it exhibited more pronounced geographical differences. The overall trend shows an average home availability of between four and five hours per day for home deliveries. The most frequent purchase are food-related products and small deliveries, like books and electronics. These findings reflect potential implications for delivery preferences., The participation of the 2nd author in this paper was part of the project METROPOLIS, financed by MCIN/AEI/10.13039/5011000110 33 and by the European Union “NextGenerationEU”/PRTR., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Microwave monitoring of Parkinson disease using a realistic human head model

  • Akazzim, Youness
  • Gugliermino, Martina
  • Rodríguez Duarte, David Orlando
  • Tobón Vásquez, Jorge Alberto
  • Vipiana, Francesca
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
Parkinson's disease (PD) is a widespread neurode-generative disorder characterized by the loss of dopaminergic neurons from the substantia nigra, causing bradykinesia, tremors, rigidity, and postural instability. In this paper, we present a differential microwave imaging study (MWI) for early-stage PD monitoring that uses the dielectric properties of the basal ganglia, particularly the thalamus. The simulations are carried out using two scenarios: one is based on studying the sensitivity of a realistic human head model. The other is the study of differential microwave imaging to monitor the PD based on the dopamine level changes in the basal ganglia. The MWI system contains 24 printed flexible antennas with a custom-made matching medium covering the head model. The obtained results demonstrate that small variations in dielectric properties within the human head, in particular the thalamus, can be detected, which can be used to monitor Parkinson's disease in a very early stage., This work was financially supported in part by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR)(2021 FISDU 00195), PDR-2014-2022/56-30157-2021-2 A grant of the Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 grants of the Ministerio de Ciencia, Innovacion y Universidades (Spain). This work was supported in part by the project PON Research and Innovation “Microwave Imaging and Detection powered by Artificial Intelligence for Medical and Industrial Applications (DM 1062/21)”, funded by MUR. It was carried out partially within the Agritech National Research Center, funded by the Next-Generation EU (PNRR, Missione 4, Componente 2, Investimento 1.4, D.D. 1032 17/06/2022, CN00000022., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing the viability of parking slot utilization as transhipment points for parcel carriers: a case study in Barcelona

  • Savall Mañó, Maria
  • Ribas Vila, Immaculada
The measures proposed in the sustainable and smart mobility strategy developed by the European commission are crucial for achieving the environmental objectives for 2030. This strategy includes measures specifically aimed at reducing the impact of e-commerce distribution. One widely adopted strategy for mitigating the impact of e-commerce distribution is the establishment of urban consolidation centres (UCCs). While this infrastructure quickly demonstrates its environmental success in urban areas, achieving long-term economic sustainability proves challenging. In this paper, we introduce a methodology aimed at incentivizing parcel carriers to shift towards an economically feasible and environmentally sustainable distribution mode within urban areas by leveraging their own transhipment space. This methodology includes a mathematical program for determining the quantity and locations of parking slots, taking into account the number of parcels and transportation vehicles used. It also utilizes the Continuous Approximation technique to assess the transportation and environmental costs of the proposed solutions. The proposed methodology is implemented for the city of Barcelona, considering three different sizes of parcel carriers: the carrier handling the largest volume of parcels, the carrier handling the lowest volume of parcels, and an intermediate case. The vehicles considered for delivery from the transhipment points include vans, cargo bikes, and trolleys for distribution on foot. The results indicate that a significant reduction in both transport and environmental costs is achieved when using zero-emissions vehicles for delivery from transhipment points for any of the parcel carriers considered., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Magnetoelectric dipole antenna extending NLOS short-distance vehicular communication with orbital angular momentum modes

  • Jofre Cruanyes, Marc
  • Akazzim, Youness
  • Towfiq, Asaduzzaman
  • Cetiner, Bedri Artug
  • Blanch Boris, Sebastián
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
The ability to utilize resources to meet the need of growing diversity in services and user behavior marks the future of cognitive wireless communication systems. Cognitive wireless technologies for vehicular communications, in combination with Orbital Angular Momentum (OAM) modes aim at extending direct Non-Line-Of-Sight (NLOS) short-distance communications for smart mobility. In this regard, OAM antennas need to be developed to support these technologies. To this end, here we describe a compact antenna supporting the first OAM modes. Also, the antenna properties are discussed and are numerically and experimentally validated for OAM modes of l=±1 . Particularly, for the considered OAM modes, the antenna achieves more than 500 MHz operation bandwidth at the frequency of operation of 3.5 GHz. Also, for l=±1 OAM modes, the null beamwidth aligns precisely with the anticipated dimensions theoretically computed., This work was financially supported by PDR-2014-2022/56-30157-2021-2A grant of the Generalitat de Catalunya and by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31 and Prueba de Concepto PDC2022-133091-I00 and Metropolis PLEC2021-007609 grants of the Ministerio de Ciencia, Inno-vación y Universidades (Spain)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

GeoLSTM: A road geometry-aware neural network model for spatio-temporal highway traffic speed and intensity forecasting

  • Franco Panadès, Gerard
  • Llatje i Hierro, Òscar
  • Pagès Giralt, Laia
  • Jofre Roca, Lluís
Accurate prediction of dynamic states in complex physical systems is critical for intelligent decision-support and control. This paper presents a novel spatio-temporal deep learning framework tailored to expert systems operating in mobility and transportation environments. Using a large-scale, multi-source dataset collected over two years from a 100-kilometer highway segment, the proposed model integrates static road geometry features—specifically curvature and slope—into a Long Short-Term Memory (LSTM) architecture. We introduce GeoLSTM, a geometry-aware neural network model that enhances mid-term traffic forecasting accuracy across multiple metrics, including vehicle speed, total intensity and heavy-vehicle (HV) intensity, addressing the common omission of static road geometry by embedding curvature and slope. Our experiments demonstrate that incorporating static spatial features significantly reduces prediction error (up to 26% for speed and 16% for heavy-vehicle intensity) and improves model stability, outperforming both traditional baselines and transformer-based alternatives. We further quantify computational costs to assess real-time deployment feasibility. These results establish a robust methodology for integrating contextual spatial data into deep learning-based expert systems, with potential generalization across other domains requiring predictive modelling in structured, data-rich environments., The first author would like to personally acknowledge the Catalan Traffic Authority and the Industrial Doctorates Plan of the Department of Research and Universities of the Generalitat de Catalunya for supporting with funding the research project which frames this research article, developed in the framework of his PhD thesis. Additional support was provided by the European Institute of Technology (EIT) for funding mobility to attend conferences through the Doctoral Training Network (DTN) organization. Furthermore, the research has also been developed in the context of the following projects: • i-MovE (Interoperabilidad para una Movilidad Eficiente, sEgura y Equitativa) project, funded by TSI-100121-2024-25 and by the EuropeanUnion NextGenerationEU/PRTR; • METROPOLIS project, PLEC2021-007609, funded by MCIN/AEI/ 10.13039/501100011033 and by the EuropeanUnion NextGenerationEU/PRTR; •And the REDES project, aid RED2024-154236-E funded by MICIU/ AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Microwave imaging for Parkinson’s disease detection: A phantom-based feasibility study using temperature-controlled dielectric variations

  • Cardinali, Leonardo
  • Rodríguez Duarte, David Orlando
  • Tobón Vásquez, Jorge Alberto
  • Vipiana, Francesca
  • Jofre Roca, Lluís
Parkinson’s disease (PD) is characterized by pathological changes in the substantia nigra, which in its early stages may manifest as structural and functional asymmetries between the two hemispheres. Microwave imaging has recently emerged as a promising non-invasive tool to detect subtle dielectric variations. In the context of Parkinson’s disease, such contrasts are expected to arise from the underlying physiological alterations in brain tissue, although their magnitude has not yet been fully characterized. In this work, we investigate the feasibility of differential microwave imaging, where detection is based on permittivity contrasts, through a controlled phantom study. A simple two-dimensional head phantom was constructed using a 3D-printed cylindrical container filled with water, incorporating a Teflon tube to represent the substantia nigra. The tube was filled with hot water, whose gradual cooling emulated small dielectric changes. Since the dielectric properties of water vary linearly with temperature over 0.5–3 GHz, we first validated this dependence through both numerical analysis and experimental measurements. Four antennas were then employed in a differential imaging configuration, with image reconstruction performed via the multi-frequency bi-focusing algorithm. The results show that the system can successfully detect a dielectric contrast corresponding to a temperature variation as small as 0.4 °C, equivalent to approximately 0.17% in relative permittivity. While the exact dielectric changes associated with PD remain to be determined, these results demonstrate that the proposed approach is sensitive to very small contrasts, supporting the potential of differential microwave imaging as a candidate tool for future investigations into Parkinson’s disease detection., This work was supported in part by the project “THERAD—Microwave Theranostics for Alzheimer’s Disease”, funded by Compagnia di San Paolo; in part by the project “INSIGHTFOOD—An innovative microwave sensing system for the evaluation and monitoring of food quality and safety”, funded by the Italian Ministry of Foreign Affairs and International Cooperation (MAECI, CUP E13C23000180005); in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR-2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de lnvestigacion, Spain, under Grant CICYT PID2019-107885GBC31, Grant PID2022-136869NB-C31, and Grant Prueba de Concepto PDC2022-133091-IO0; and in part by Next Generation EU. It was carried out partially within the Agritech National Research Center, funded by the European Union Next—Generation EU (Piano Nazionale di Ripresa e Resilienza (PNRR)—MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.4—D.D. 1032 17/06/2022, CN00000022)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Microwave resonant wireless sensor for enhanced particle detection in microfluidic channels

  • Ataa-Allah, Houda
  • Ataa Allah, Fatima
  • Palacios Arias, César Augusto
  • Aznabet, Mariem
  • El mrabet, Otman
  • Jofre Cruanyes, Marc
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
This paper presents a highly sensitive microwave sensor for bioparticle detection, designed around a ring-gap resonator integrated with a microfluidic channel. The sensor’s structure is optimized to enhance electric field confinement, improving its sensitivity to dielectric variations. Experimental validation using commercial microbeads as bioparticle models demonstrates clear resonance shifts, confirming the sensor’s capability for precise detection of particles up to 5 µm. These results highlight the potential of the proposed approach for realtime, label-free biosensing applications, offering a promising tool for biomedical diagnostics and analytical chemistry., This work was supported in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR-2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de Investigación, Spain, under Grant CICYT PID2019- 107885GBC31, Grant PID2022-136869NB-C31, and Grant Prueba de Concepto PDC2022-133091-I00; and in part by the Next Generation EU. Additionally, this work is supported by the CNRST as part of the ”PhD-Associate Scholarship – PASS” Program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Uncertainty analysis of autonomous delivery robot operations for last-mile logistics in European cities

  • Lemardelé, Clément
  • Estrada Romeu, Miguel Ángel
  • Pagès, Laia
Although autonomous delivery robots (ADRs) are widely anticipated to significantly enhance the efficiency of last-mile logistics operations in dense urban environments in the coming years, their impact on logistics service providers’ supply chains has yet to be accurately assessed on a large scale. The primary objective of this article is to quantify the uncertainty in the cost of ADR operations as a function of the stochastic behavior of given input variables. First, ADR operations are modeled using the continuous approximation methodology. The mathematical formulations proposed in this article relate certain ADR and service area input parameters to provide an estimate of the carrier’s last-mile operating costs. An uncertainty analysis based on the Monte Carlo approach is then performed. The numerical results indicate that the implementation of a two-echelon delivery scheme with heavy-duty vehicles cooperating with ADRs through an urban logistics micro-hub would, on average, reduce last-mile operating costs by more than 10% in small and medium-sized European cities, given adequate operational conditions., The first author would like to personally acknowledge CARNET Barcelona for the funding of this research article, developed in the framework of his PhD thesis. The participation of the second author has taken place under the METROPOLIS project, PLEC2021-007609, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The authors also acknowledge the comments of anonymous reviewers, which greatly helped in improving and clarifying the article., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

OAM antennas for NLOS communications

  • Moriones Galve, Pau
  • Aldana Alonso, Rubén
  • Jofre Cruanyes, Marc
  • Molina García-Pardo, José María
  • Pascual García, Juan
  • Ferrando Bataller, Miguel
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
EM waves carrying orbital angular momentum (OAM) have been investigated in relation to their generation and transmission, with increasing interest in their usage and integration into modern communication systems. In the radio domain, the employment of a uniform circular array (UCA) featuring a consistent phase shift between neighboring elements is the most common technique employed in the literature to generate OAM carrying waves. Although offering an understandable solution, the consistent phase shift may not guarantee pure OAM generation and isolation between the different modes when interested on capacity increase with orthogonal multimodal solutions. In this work, the orientation of the elements in the antenna array is reviewed concerning collinear and radial arrangements of its elements, briefly analyzing the generation and transmission performance of different OAM eigenmodes, prioritizing short-range communication use cases. With respect to the latter, this report also addresses considerations about the performance evaluation of different OAM modes in the absence of clear LOS visibility under the aforementioned geometries., Grants PDR-2014-2022/56-30157-2021-2A, 2021 SGR 01415 Q0818003F, Metropolis PLEC2021-007609, PID2022-136869NB-C31, and PDC2022-133091-I00, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Resonance-based microwave monitoring of live/dead bacteria in a microfluidic channel

  • Ataa-Allah, Houda
  • Aznabet, Mariem
  • Palacios Arias, César Augusto
  • Akazzim, Youness
  • El mrabet, Otman
  • Jofre Cruanyes, Marc
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
In this work, we have studied a highly sensitive microwave sensor for the detection of Escherichia coli (E. coli) bacteria at the single-cell level. The proposed system integrates a microwave sensor with a microfluidic channel for bacteria flow control. The microwave sensor is based on a planar microwave annular ring resonator working around 5GHz. Inside the channel, E. coli bacteria have been modeled using dielectric characteristics present in state-of-the-art literature. To enhance field confinement and achieve the highest electric field strength we have introduced two 50um gaps into the resonator. This approach holds great potential for different applications, including food safety control, healthcare diagnosis, and environmental monitoring, where the ability to detect a single E. coli cell is paramount., This work was financially supported in part by ID2019- 107885GBC31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR) (2021 FISDU 00195), PDR-2014- 2022/56-30157-2021-2 Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 Ministerio de Ciencia, Innovacion y Universidades (Spain)., Peer Reviewed, Postprint (published version)