Pasar al contenido principal

INTEGRACION DEL PROCESO CA-LOOPING EN CENTRALES DE ENERGIA SOLAR CONCENTRADA PARA EL ALMACENAMIENTO TERMO-QUIMICO DE ENERGIA

PRE2018-085866

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructural control by freeze-casting of CaO architectures for improved and stable thermochemical energy storage performance

  • Ambhar, Nabil
  • Perejón, Antonio
  • Hanaor, Dorian
  • Gurlo, Aleksander
  • Ramírez-Rico, Joaquín
  • Pérez-Maqueda, Luis A.
  • Sánchez-Jimenez, Pedro E.
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] This study investigates the development of porous calcium-based monoliths via freeze-casting (FC) as a novel approach for thermochemical energy storage, particularly within the Calcium Looping (CaL) process. The freeze-casting technique enabled the fabrication of scaffolds with controlled porosity using polyvinyl alcohol (PVA) as a binder. Experimental results demonstrated that freeze-cast monoliths exhibited superior multicycle performance under various carbonation and calcination conditions. The FC-CaCO3 monolith achieved the highest residual conversion of 68.1 % under mild vacuum calcination conditions (780 °C, 0.1 bar CO2), significantly surpassing other configurations. Tests conducted in an inert atmosphere also yielded favorable results, with a conversion of 56.1 %, outperforming equivalent raw powder samples. The enhanced performance is attributed to improved CO2 interaction with the porous structure, mitigating sintering effects and preserving active surface area. Morphological observations by X-ray tomography and SEM confirmed limited particle sintering after multiple cycles, maintaining a reactive surface that supported consistent conversion rates. The pore size distribution of the material evolves upon cycling resulting in an increased microporosity, while the pore network maintains a low tortuosity (¿ ~ 1.5¿2.0). The addition of dopants such as ZrO2 and SiO2 did not enhance performance, as the monoliths' inherent structure provided sufficient stability. These findings highlight freeze-casting as a promising method for creating advanced porous materials suitable for energy storage applications., Financial support is acknowledged from grants TED2021-131839B-C22 and PDC2021-121552-C21 (MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR) and by European Union NextGenerationEU/PRTR, and the grant PID2022-140815OB-C22 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. PhD Fellowship granted to N. Amghar (PRE2018-085866) from the Spanish Government Agency Ministerio de Ciencia, Innovacion y Universidades. J. Ivorra-Martinez thanks Generalitat Valenciana-GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. XCT measurements were performed at the X-ray laboratory of the Research, Technology and Innovation Center (CITIUS) of the University of Seville.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ca-based materials derived from calcined cigarette butts for CO2 capture and thermochemical energy storage

  • Amghar, Nabil
  • Moreno-García, Virginia
  • Sanchez-Jimenez, Pedro Enrique
  • Perejón, Antonio
  • Pérez-Maqueda, Luis A.
[EN] Cigarette butts (CBs) are one of the most common types of litter in the world. Due to the toxic substances they contain, the waste generated poses a harmful risk to the environment, and therefore there is an urgent need for alternative solutions to landfill storage. Thus, this work presents a possible revalorization of this waste material, which implies interesting environmental benefits. CBs were used as sacrificial templates for the preparation of CaO-based materials by impregnation with calcium and magnesium nitrates followed by flaming combustion. These materials presented enhanced porosity for their use in the Calcium Looping process applied either to thermochemical energy storage or CO2 capture applications. The influence of the concentration of Ca and Mg in the impregnating solutions on the multicycle reactivity of the samples was studied. An improved multicycle performance was obtained in terms of conversion for both applications. (c) 2023 The Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V., This work was supported by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR (Nos. PDC2021-121552-C21 and PID2022-140815OB-C22) and Ministerio de Ciencia e Innovacion (No. TED2021-131839B-C22). Nabil Amghar acknowledges the Ph.D Fellowship grant from the Spanish Government Agency Ministerio de Ciencia, Innovacion y Universidades (No. PRE2018-085866) . Virginia Moreno wants to thank Generalitat Valenciana-GVA for funding a postdoc position through the APOSTD program co-funded by ESF Investing in your future (No. CIAPOS/2021/67) .
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructural control by freeze-casting of CaO architectures for improved and stable thermochemical energy storage performance

  • Amghar, Nabil
  • Ivorra-Martínez, Juan
  • Perejón, Antonio
  • Hanaor, Dorian
  • Gurlo, Aleksander
  • Ramírez-Rico, Joaquín
  • Pérez-Maqueda, Luis A.
  • Sánchez-Jiménez, Pedro E.
This study investigates the development of porous calcium-based monoliths via freeze-casting (FC) as a novel approach for thermochemical energy storage, particularly within the Calcium Looping (CaL) process. The freeze-casting technique enabled the fabrication of scaffolds with controlled porosity using polyvinyl alcohol (PVA) as a binder. Experimental results demonstrated that freeze-cast monoliths exhibited superior multicycle performance under various carbonation and calcination conditions. The FC-CaCO<inf>3</inf> monolith achieved the highest residual conversion of 68.1 % under mild vacuum calcination conditions (780 °C, 0.1 bar CO<inf>2</inf>), significantly surpassing other configurations. Tests conducted in an inert atmosphere also yielded favorable results, with a conversion of 56.1 %, outperforming equivalent raw powder samples. The enhanced performance is attributed to improved CO<inf>2</inf> interaction with the porous structure, mitigating sintering effects and preserving active surface area. Morphological observations by X-ray tomography and SEM confirmed limited particle sintering after multiple cycles, maintaining a reactive surface that supported consistent conversion rates. The pore size distribution of the material evolves upon cycling resulting in an increased microporosity, while the pore network maintains a low tortuosity (τ ~ 1.5–2.0). The addition of dopants such as ZrO<inf>2</inf> and SiO<inf>2</inf> did not enhance performance, as the monoliths' inherent structure provided sufficient stability. These findings highlight freeze-casting as a promising method for creating advanced porous materials suitable for energy storage applications., Financial support is acknowledged from grants TED2021-131839B-C22 and PDC2021-121552-C21 (MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR) and by European Union NextGenerationEU/PRTR, and the grant PID2022-140815OB-C22 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. PhD Fellowship granted to N. Amghar (PRE2018-085866) from the Spanish Government Agency Ministerio de Ciencia, Innovación y Universidades. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. XCT measurements were performed at the X-ray laboratory of the Research, Technology and Innovation Center (CITIUS) of the University of Seville., Peer reviewed