Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

X-ray absorptiometry and ultrasound technologies for non-destructive compositional analysis of dry-cured ham

  • Fulladosa, E.
  • PRADOS PEDRAZA, MARTA DE
  • Muñoz, I
  • Arnau, J.
  • Gou, Pere
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Benedito Fort, José Javier|||0000-0003-0163-4593
[EN] The characterization of dry-cured ham according to salt and fat contents is of great interest to industry and consumers. In this study, the feasibility of using non-destructive technologies such as X-rays and ultrasound (US) for this purpose was evaluated in dry-cured ham portions. Predictive models for fat and salt contents were based on the measurement of X-ray attenuation at different incident energies and the US velocity when the ham was at 2 and 15 degrees C. A semi-empirical model based on the US measurements was also developed. Salt content was better predicted by X-ray technology (RMSEV = 0.43%) than US (RMSEV = 0.69%) and their combination had little impact on the accuracy of the prediction. US predicted fat content slightly better (RMSEV = 6.70%) than X-rays (RMSEV = 7.00%), and their combination increased the accuracy of the prediction (RMSEV = 5.60%). Using the best models, 81% of samples were correctly classified into three salt content categories with X-rays whereas 71% of samples were correctly classified into three fat content categories by combining X-rays and US. (C) 2015 Elsevier Ltd. All rights reserved., This work was supported by Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) (contract n. RTA2010-00029-CO4-01/02) and by Universitat Politecnica de Valencia (UPV) through the FPI-2011 Grant awarded to Marta de Prados.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-destructive determination of fat content in green hams using ultrasound and X-rays

  • PRADOS PEDRAZA, MARTA DE
  • Fulladosa, E.
  • GOU, P.
  • Muñoz, I
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Benedito Fort, José Javier|||0000-0003-0163-4593
[EN] This work addresses the use of ultrasound (US) and medical dual energy X-ray absorptiometry methods to predict the fat content in green pork hams. Ultrasonic velocity (õ) and X-ray absorption were measured in 78 green hams. An increase in the fat content involved an increase in õ and a decrease in the X-ray attenuationmeasured at 2 °C.Models developed to predict the fat content fromthe ultrasonic velocity or X-ray parameters provided errors of 2.97% and 4.65%, respectively. The combination of both US and X-ray technologies did not improve prediction accuracy. These models allowed green hams to be classified into three levels of fatness, with 88.5% and 65.4% of the hams correctly classified when using models based on ultrasonic and X-ray parameters, respectively. Therefore, US and X-rays emerge as useful quality control technologies with which to estimate the fat content in green pork hams, This work was supported by the spanish Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) (contracts n. RTA2010-00029-CO4-01/02) and by Universitat Politecnica de Valencia (UPV) through the FPI grant given to Marta de Prados (SP-1.2011-S1-2757).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-destructive salt content prediction in brined pork meat using ultrasound technology

  • PRADOS PEDRAZA, MARTA DE
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Benedito Fort, José Javier|||0000-0003-0163-4593
[EN] This works aims to show the feasibility of using low-intensity ultrasound (US) to predict the salt content in brined Biceps femoris (BF) and Longissimus dorsi (LD) pork muscles. For this purpose, meat samples were salted in brine solution (20% w/w at 2 degrees C) for different times (24, 48, 96 and 168 h) and the US velocity measured before and after salting. In addition, model samples with preset water and salt contents were formulated and the US velocity was measured. In the model samples, the salt content (X-S) had a more marked effect on the US velocity (13.0 m/s per Delta X-S = 1% wet basis) than the water content (5.0 m/s per Delta X-w = 1% wet basis). The salt gain and the water loss during brining caused the US velocity to increase (61.5 and 49.3 m/s for 168 h in LD and BF, respectively). Significant linear relationships between the US velocity and both factors (X-S and X-w) were established (R-2 > 0.771). A predictive model of the salt content based on the US velocity was proposed; this was successfully validated (average estimation error 0.48%), which shows the feasibility of using US for industrial quality control purposes. (C) 2015 Elsevier Ltd. All rights reserved., This work was supported by the spanish Ministerio de Economia y Competitividad (MINECO) and Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) (contracts n. RTA2010-00029-004-01/02; RTA2013-00030-003-02), European Regional Development Fund (ERDF) and by the Universitat Politecnica de Valencia (UPV) through the FPI grant awarded to Marta de Prados.