Pasar al contenido principal

OPTIMIZACION DEL PROCESO DE TRATAMIENTO DE GASES DE COMBUSTION EN BIOLAVADORES MULTIETAPA ORIENTADO HACIA LA RECUPERACION DE AZUFRE

RTI2018-099362-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stable Full-Inkjet-Printed Solid-State Ag/AgCl Reference Electrode

  • Moya, Ana
  • Pol, Roberto
  • Martínez-Cuadrado, Alfonso
  • Villa, Rosa
  • Gabriel, Gemma
  • Baeza, Mireia
With a growing demand for the availability of inexpensive, simple, and rapid prototyped devices, the prospect of miniaturization of the reference electrodes using printing techniques becomes promising. A stable and reusable full-inkjet-printed solid-state reference electrode (IPRE) was developed. The reference electrode was fully produced by consecutive inkjet printing of several layers. Ag ink was printed and chlorinated by NaClO printing, forming a Ag/AgCl pseudoreference electrode. Then a surface protection by printing a Cl--saturated polyvinyl butyral membrane finally gave a reference electrode that demonstrated an outstanding performance comparable to commercial ones. This full inkjet printing fabrication strategy will improve the viability of producing low-cost miniaturized reference electrodes with interest in many electrochemical sensor-dependent areas., Undergraduate student F. Paré is acknowledged for his early contribution in this project. R. Pol acknowledges Universitat Autònoma de Barcelona (UAB) for the PIF grant. Authors also appreciate financial support from the RTI2018-099362-B-C21 and RTI2018-096786-B-I00 research projects from the Spanish Ministerio de Economí a y Competitividad y Fondo Europeo de Desarrollo Regional (MINECO/FEDER, UE). The authors also acknowledge ICTS “NANBIOSIS”, more specifically the SU8 Unit of CIBER in Bioengineering, Biomaterials & Nanomedicne (CIBER-BBN) at IMB-CNM (CSIC)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Conferencia académica (Lecture)

Characterization of sulfate reducing sludge using an inkjet printed H2S sensor

  • Castro, Rebeca
Pòster amb el resum gràfic de la tesi doctoral en curs, que forma part de l'exposició "Doctorat en Recursos Naturals i Medi Ambient de la UPC Manresa. 30 anys formant en recerca a la Catalunya Central 1992-2022"., The authors acknowledge the Spanish Government, through the project RTI2018-099362-B-C21 MINECO/FEDER, EU, for the financial support provided to perform this research.
UPCommons. Portal del coneixement obert de la UPC
Publicación Conferencia académica (Lecture)

Biological technologies for nitric oxide abatement

  • Cubides Páez, David Fernando|||0000-0002-0450-4738
Pòster amb el resum gràfic de la tesi doctoral en curs, que forma part de l'exposició "Doctorat en Recursos Naturals i Medi Ambient de la UPC Manresa. 30 anys formant en recerca a la Catalunya Central 1992-2022"., This work was financially supported by the Catalan Government through the funding grant ACCIÓ-Eurecat (Project PRIV2020/21-AIRECAT). The authors acknowledge the Spanish Government, through the project RTI2018-099362-B-C21 MINECO/FEDER, EU, for the financial support provided to performthis research.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The effect of slime accumulated in a long-term operating UASB using crude glycerol to treat S-rich wastewater

  • Zhou, Xudong
  • Fernández Palacios, Eva
  • Dorado Castaño, Antonio David|||0000-0003-0238-5867
  • Lafuente Sancho, Francisco Javier
  • Gamisans Noguera, Javier|||0000-0003-1856-8692
  • Gabriel Buguña, David
Authors acknowledge the Spanish Government, through the project RTI2018-099362-B-C21 MINECO/FEDER, EU, for the financial support provided to perform this research. The first author thanks the China Scholarship Council (CSC, 201706300052) for financial support., Peer Reviewed, Objectius de Desenvolupament Sostenible::6 - Aigua Neta i Sanejament::6.3 - Per a 2030, millorar la qualitat de l’aigua mitjançant la reducció de la contaminació, l’eliminació dels abocaments i la reducció al mínim de la descàrrega de materials i productes químics perillosos, la reducció a la meitat del percentatge d’aigües residuals sense tractar, i un augment substancial a escala mundial del reciclat i de la reutilització en condicions de seguretat, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables::12.2 - Per a 2030, assolir la gestió sostenible i l’ús eficient dels recursos naturals, Objectius de Desenvolupament Sostenible::6 - Aigua Neta i Sanejament
Recercat. Dipósit de la Recerca de Catalunya
Publicación Conferencia académica (Lecture)

Biological technologies for nitric oxide abatement

  • Cubides Páez, David Fernando
Pòster amb el resum gràfic de la tesi doctoral en curs, que forma part de l'exposició "Doctorat en Recursos Naturals i Medi Ambient de la UPC Manresa. 30 anys formant en recerca a la Catalunya Central 1992-2022"., This work was financially supported by the Catalan Government through the funding grant ACCIÓ-Eurecat (Project PRIV2020/21-AIRECAT). The authors acknowledge the Spanish Government, through the project RTI2018-099362-B-C21 MINECO/FEDER, EU, for the financial support provided to performthis research., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The effect of slime accumulated in a long-term operating UASB using crude glycerol to treat S-rich wastewater

  • Zhou, Xudong
  • Fernández Palacios, Eva
  • Dorado Castaño, Antonio David
  • Lafuente Sancho, Francisco Javier
  • Gamisans Noguera, Javier
  • Gabriel Buguña, David
Authors acknowledge the Spanish Government, through the project RTI2018-099362-B-C21 MINECO/FEDER, EU, for the financial support provided to perform this research. The first author thanks the China Scholarship Council (CSC, 201706300052) for financial support., Peer Reviewed, Objectius de Desenvolupament Sostenible::6 - Aigua Neta i Sanejament::6.3 - Per a 2030, millorar la qualitat de l’aigua mitjançant la reducció de la contaminació, l’eliminació dels abocaments i la reducció al mínim de la descàrrega de materials i productes químics perillosos, la reducció a la meitat del percentatge d’aigües residuals sense tractar, i un augment substancial a escala mundial del reciclat i de la reutilització en condicions de seguretat, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables::12.2 - Per a 2030, assolir la gestió sostenible i l’ús eficient dels recursos naturals, Objectius de Desenvolupament Sostenible::6 - Aigua Neta i Sanejament, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Conferencia académica (Lecture)

Characterization of sulfate reducing sludge using an inkjet printed H2S sensor

  • Castro, Rebeca
Pòster amb el resum gràfic de la tesi doctoral en curs, que forma part de l'exposició "Doctorat en Recursos Naturals i Medi Ambient de la UPC Manresa. 30 anys formant en recerca a la Catalunya Central 1992-2022"., The authors acknowledge the Spanish Government, through the project RTI2018-099362-B-C21 MINECO/FEDER, EU, for the financial support provided to perform this research., Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Model-based analysis of feedback control strategies in aerobic biotrickling filters for biogas desulfurization

  • López, Luis Rafael
  • Mora Garrido, Mabel|||0000-0002-2979-3601
  • Van der Heyden, Caroline
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Volcke, Eveline
  • Gabriel, David|||0000-0002-7713-4192
Biotrickling filters are one of the most widely used biological technologies to perform biogas desulfurization. Their industrial application has been hampered due to the difficulty to achieve a robust and reliable operation of this bioreactor. Specifically, biotrickling filters process performance is affected mostly by fluctuations in the hydrogen sulfide (H2S) loading rate due to changes in the gas inlet concentration or in the volumetric gas flowrate. The process can be controlled by means of the regulation of the air flowrate (AFR) to control the oxygen (O2) gas outlet concentration ([O2]out) and the trickling liquid velocity (TLV) to control the H2S gas outlet concentration ([H2S]out). In this work, efforts were placed towards the understanding and development of control strategies in biological H2S removal in a biotrickling filter under aerobic conditions. Classical proportional and proportional-integral feedback controllers were applied in a model of an aerobic biotrickling filter for biogas desulfurization. Two different control loops were studied: (i) AFR Closed-Loop based on AFR regulation to control the [O2]out, and (ii) TLV Closed-Loop based on TLV regulation to control the [H2S]out. AFR regulation span was limited to values so that corresponds to biogas dilution factors that would give a biogas mixture with a minimum methane content in air, far from those values required to obtain an explosive mixture. A minimum TLV of 5.9 m h-1 was applied to provide the nutrients and moisture to the packed bed and a maximum TLV of 28.3 m h-1 was set to prevent biotrickling filter (BTF) flooding. Control loops were evaluated with a stepwise increase from 2000 ppmv until 6000 ppmv and with changes in the biogas flowrate using stepwise increments from 61.5 L h-1 (EBRT = 118 s) to 184.5 L h-1 (EBRT = 48.4 s). Controller parameters were determined based on time-integral criteria and simple criteria such as stability and oscillatory controller response. Before implementing the control strategies, two different mass transfer correlations were evaluated to study the effect of the manipulable variables. Open-loop behavior was also studied to determine the impact of control strategies on process performance variables such as removal efficiency, sulfate and sulfur selectivity, and oxygen consumption. AFR regulation efficiently controlled [O2]out; however, the impact on process performance parameters was not as great as when TLV was regulated to control [H2S]out. This model-based analysis provided valuable information about the controllability limits of each strategy and the impact that each strategy can have on the process performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Microbial diversity dynamics in a methanogenic-sulfidogenic UASB reactor

  • Fernandez Palacios, Eva|||0000-0002-0095-220X
  • Zhou, Xudong
  • Mora Garrido, Mabel|||0000-0002-2979-3601
  • Gabriel, David|||0000-0002-7713-4192
In this study, the long-term performance and microbial dynamics of an Upflow Anaerobic Sludge Blanket (UASB) reactor targeting sulfate reduction in a SOx emissions treatment system were assessed using crude glycerol as organic carbon source and electron donor under constant S and C loading rates. The reactor was inoculated with granular sludge obtained from a pulp and paper industry and fed at a constant inlet sulfate concentration of 250 mg S-SO42-L-1 and a constant C/S ratio of 1.5 ± 0.3 g Cg-1 S for over 500 days. Apart from the regular analysis of chemical species, Illumina analyses of the 16S rRNA gene were used to study the dynamics of the bacterial community along with the whole operation. The reactor was sampled along the operation to monitor its diversity and the changes in targeted species to gain insight into the performance of the sulfidogenic UASB. Moreover, studies on the stratification of the sludge bed were performed by sampling at different reactor heights. Shifts in the UASB performance correlated well with the main shifts in microbial communities of interest. A progressive loss of the methanogenic capacity towards a fully sulfidogenic UASB was explained by a progressive wash-out of methanogenic Archaea, which were outcompeted by sulfate-reducing bacteria. Desulfovibrio was found as the main sulfate-reducing genus in the reactor along time. A progressive reduction in the sulfidogenic capacity of the UASB was found in the long run due to the accumulation of a slime-like substance in the UASB.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Assessing main process mechanism and rates of sulfate reduction by granular biomass fed with glycerol under sulfidogenic conditions

  • Zhou, Xudong
  • Fernandez Palacios, Eva|||0000-0002-0095-220X
  • Dorado, Antonio David|||0000-0003-0238-5867
  • Gamisans Noguera, Xavier|||0000-0003-1856-8692
  • Gabriel, David|||0000-0002-7713-4192
Sulfate-reducing bioreactors for sulfide production are the initial stage of processes targeting elemental sulfur recovery from sulfate-rich effluents. In this work, the principal reactions involved in glycerol fermentation and sulfate reduction using glycerol and its fermentation products as electron donors were assessed together with their specific consumption/production rates. A battery of batch activity tests with and without sulfate were performed with glycerol and with each fermentation product using a non-methanogenic but sulfidogenic granular sludge from an up-flow anaerobic sludge blanket (UASB) reactor operated under long-term while fed with crude glycerol. As a result, a mechanistic approach based on the experimental observations is proposed in this work. Glycerol was mainly fermented to 1,3-propanediol, ethanol, formate, propionate and acetate by fermentative bacteria. All organic intermediates were found to be further used by sulfate reducing bacteria (SRB) for sulfate reduction except for acetate. The most abundant genus detected under sulfidogenic conditions were Propionispora (15.2%), Dysgonomonas (13.2%), Desulfobulbus (11.6%) and Desulfovibrio (10.8%). The last two SRB genera accounted for 22.4% of the total amount of retrieved sequences, which were probably performing an incomplete oxidation of the carbon source in the sulfidogenic UASB reactor. As single substrates, specific sulfate reduction rates (SRRs) using low molecular weight (MW) carbon sources (formate and ethanol) were 39% higher than those using high-MW ones (propionate, 1,3-propanediol and butanol). However, SRRs in glycerol-fed tests showed that 1,3-propanediol played a major role in sulfate reduction in addition to formate and ethanol.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Customized In Situ Functionalization of Nanodiamonds with Nanoparticles for Composite Carbon-Paste Electrodes

  • Montes, Raquel|||0000-0001-8805-9987
  • Sánchez, Gerard
  • Zhao, Jingjing
  • Palet, Cristina|||0000-0002-7467-613X
  • Baeza, Mireia|||0000-0002-2240-6410
  • Bastos Arrieta, Julio|||0000-0002-8939-6253
The incorporation of nanomaterials on (bio)sensors based on composite materials has led to important advances in the analytical chemistry field due to the extraordinary properties that these materials offer. Nanodiamonds (NDs) are a novel type of material that has raised much attention, as they have the possibility of being produced on a large scale by relatively inexpensive synthetic methodologies. Moreover, NDs can present some other interesting features, such as fluorescence, due to surface functionalization and proved biocompatibility, which makes them suitable for biomedical applications. In addition, NDs can be customized with metallic nanoparticles (NPs), such as silver or gold, in order to combine the features of both. Raw NDs were used as modifiers of sensors due to the electrocatalytic effect of the sp 2 and oxygenated species present on their surface. The aim of this research work is evaluating the applicability of NDs modified with silver (Ag@NDs) and gold (Au@NDs) nanoparticles for the development of a suitable (bio)sensing platform. A complete morphological and electrochemical characterization as a function of the prepared nanocomposite composition was performed in order to improve the electroanalytical properties of the developed (bio)sensors. In the present work, the optimal composition for Au@NDs present on the nanocomposite matrix is 3.5% and the one for Ag@NDs is 1%. Good results were obtained in the evaluation of the optimal composition towards hydrogen peroxide and glucose as a model analyte using a (bio)sensor based on graphite-epoxy-Ag@NDs (17:82:1).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Composite Electrodes Based on Carbon Materials Decorated with Hg Nanoparticles for the Simultaneous Detection of Cd(II), Pb(II) and Cu(II)

  • López Fernández, Laia|||0000-0003-0033-8231
  • Bastos Arrieta, Julio|||0000-0002-8939-6253
  • Palet, Cristina|||0000-0002-7467-613X
  • Baeza, Mireia|||0000-0002-2240-6410
Monitoring water quality has become a goal to prevent issues related to human health and environmental conditions. In this sense, the concentration of metal ions in water sources is screened, as these are considered persistent contaminants. In this work, we describe the implementation of customized graphite electrodes decorated with two types of Hg nanoparticles (Hg-NPs), optimized toward the electrochemical detection of Cd, Pb and Cu. Here, we combine Hg, a well-known property to form alloys with other metals, with the nanoscale features of Hg-NPs, resulting in improved electrochemical sensors towards these analytes with a substantial reduction in the used Hg amount. Hg-NPs were synthesized using poly(diallyldimethylammonium) chloride (PDDA) in a combined role as a reducing and stabilizing agent, and then appropriately characterized by means of Transmission Electron Microscopy (TEM) and Zeta Potential. The surface of composite electrodes with optimized graphite content was modified by the drop-casting of the prepared Hg-NPs. The obtained nanocomposite electrodes were morphologically characterized by Scanning Electron Microscopy (SEM), and electrochemically by Cyclic Voltammetry (CV) and Electrochemical Impedance Spectroscopy (EIS). The results show that the Hg-NP-modified electrodes present better responses towards Cd(II), Pb(II) and Cu(II) detection in comparison with the bare graphite electrode. Analytical performance of sensors was evaluated by square-wave anodic stripping voltammetry (SWASV), obtaining a linear range of 0.005-0.5 mg·L-1 for Cd2+, of 0.028-0.37 mg·L-1 for Pb2+ and of 0.057-1.1 mg·L-1 for Cu2+. Real samples were analyzed using SWASV, showing good agreement with the recovery values of inductively coupled plasma-mass spectrometry (ICP-MS) measurements.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanistic modeling of glycerol fermenting and sulfate-reducing processes by granular sludge under sulfidogenic conditions

  • Zhou, Xudong
  • Dorado, Antonio David|||0000-0003-0238-5867
  • Lafuente Sancho, Francisco Javier|||0000-0002-4601-9001
  • Gamisans Noguera, Xavier|||0000-0003-1856-8692
  • Gabriel, David|||0000-0002-7713-4192
Glycerol can be converted to ethanol, 1,3-propanediol, formate, acetate, propionate, and inorganic carbon under anaerobic conditions through oxidative and reductive pathways in the absence and presence of sulfate. A structured mathematical model considering multiple pathways of glycerol fermentation combined with sulfate reduction was set up in this work, where three mechanisms were proposed and verified by modeling. Finally a mechanism properly predicting both glycerol fermenting and sulfate-reducing processes was chosen. Concentrations of multiple intermediates measured in batch activity tests were satisfactorily described by the model. The intermediate products of glycerol fermentation included formate, propionate, ethanol, 1,3-propanediol, and 3-hydroxypropionate (3HP). The main pathways of glycerol fermentation were the oxidative pathway to produce ethanol and the reductive pathway to produce 1,3-propanediol. The former accounted for 40.6% of the total glycerol converted whereas the latter accounted for 42.6%. 1,3-propanediol was converted to 3HP coupled to sulfate reduction. 3HP was mainly further oxidized to acetate. The kinetic parameters of maximum specific uptake rates of substrate were calibrated and then, the sulfate reduction process was validated. The confidence intervals of estimated parameters were assessed according to the Fisher information matrix (FIM) method. The low confidence intervals obtained indicated that the experimental behavior was satisfactorily described with the proposed kinetic model.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optimization of SO2 and NOx sequential wet absorption in a two-stage bioscrubber for elemental sulphur valorisation

  • Guimerà Villalba, Xavier|||0000-0002-4156-2988
  • Mora Garrido, Mabel|||0000-0002-2979-3601
  • Dorado, Antonio David|||0000-0003-0238-5867
  • Bonsfills, Anna
  • Gabriel, David|||0000-0002-7713-4192
  • Gamisans Noguera, Xavier|||0000-0003-1856-8692
Flue gases contain SO2 and NOx that can be treated together for elemental sulphur recovery in bioscrubbers, a technology that couples physical-chemical and biological processes for gaseous emissions treatment in a more economic manner than classical absorption. Sequential wet absorption of SO2 and NOx from flue gas is thoroughly studied in this work in a two-stage bioscrubber towards elemental sulphur valorisation pursuing reuse of biological process effluents as absorbents. The optimal operating conditions required for SO2 and NOx absorption in two consecutive spray absorbers were defined using NaOH-based absorbents. Overall, removal efficiencies of 98.9% and 55.9% for SO2 and NOx abatement were obtained in two in-series scrubbers operated under a gas contact time of 1 and 100 s, and a liquid-to-gas ratio of 7.5 and 15 L m-3, respectively. Higher NOx removal efficiency to clean gas emission was obtained by oxidants dosing in the absorber for NOx absorption. High NaHCO3 concentration in a two-stage bioscrubber effluent was exploited as alkaline absorbent for flue gas treatment. The performance of scrubbers using an absorbent mimicking a reused effluent exhibited the same removal efficiencies than those observed using NaOH solutions. In addition, the reuse of bioprocess effluent reduced reagents' consumption by a 63.7%. Thus, the two-stage bioscrubber proposed herein offers an environmentally friendly and economic alternative for flue gas treatment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of crude glycerol load and pH shocks on the granulation and microbial diversity of a sulfidogenic Upflow Anaerobic Sludge Blanket reactor

  • Mora Garrido, Mabel|||0000-0002-2979-3601
  • Lafuente Sancho, Francisco Javier|||0000-0002-4601-9001
  • Gabriel, David|||0000-0002-7713-4192
Bioscrubbers are an environmental-friendly alternative to valorize SO2 contained in flue gases to obtain elemental sulfur as final value-added product. The bottleneck of a SO2 bioscrubber relies on the heterotrophic reduction of the absorbed SO2 to obtain sulfide. In this study, the performance and stability of a sulfidogenic Upflow Anaerobic Sludge Blanket reactor (UASB) using crude glycerol was investigated during 6 months of operation under variable organic loading rates. The UASB presented a maximum elimination capacity and a sulfate removal efficiency of 110 mg S-SO42- L-1 h(-1) and 100%, respectively, when the chemical oxygen demand to sulfate ratio (COD/S-Sulfate) was 8.5 g O-2 g(-1) S-SO42-. The intermediate compounds identified from crude glycerol degradation were mainly propionic and acetic acid, which varied along the sludge bed together with the pH. Microbial diversity analyses of the sulfidogenic granular sludge showed that the most abundant sulfate reducing genera were Desulfovibrio spp. and Desulfobulbus spp. Methanosaeta and other fermentative/acidogenic microorganisms were also found in significant amounts. Particle size distribution analyses showed that biogas production allowed the granulation of the sulfidogenic sludge, which had an average particle size ranging from 729.3 mu m (lower part of the bed) to 391.7 mu m (upper part of the test). A short-term pH shock caused a detrimental effect over the system performance due to degranulation. Concomitantly, biogas production was interrupted and acetic acid was accumulated also causing a significant impact on microbial diversity. Unclassified Clostridiales, Desulfovibrio spp. and Desulfobulbus spp. showed a higher resistance to pH shocks.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Coupling dissolved oxygen microsensors measurements and heterogeneous respirometry for monitoring and modeling microbial activity within sulfide-oxidizing biofilms

  • Guimerà Villalba, Xavier|||0000-0002-4156-2988
  • Mora Garrido, Mabel|||0000-0002-2979-3601
  • Lopez de Leon, Luis Rafael|||0000-0003-0795-2357
  • Gabriel, Gemma|||0000-0003-2140-6299
  • Dorado, Antonio David|||0000-0003-0238-5867
  • Lafuente Sancho, Francisco Javier|||0000-0002-4601-9001
  • Gamisans Noguera, Xavier|||0000-0003-1856-8692
  • Gabriel, David|||0000-0002-7713-4192
A heterogeneous respirometer (HR) was coupled for the first time to a microelectrode monitoring system specifically designed for dissolved oxygen (DO) measuring within the biofilm. Monitoring of the oxygen concentration in the gas and liquid phases was complemented with pioneer monitoring of DO performed simultaneously and continuously at multiple biofilm depths in a linear array of eleven gold-disk electrodes of 50 µm-diameter. A set of respirometric tests performed at neutral pH and with initial gas phase concentrations of H2S ranging from 135 to 6720 ppmv were used to assess sulfide-oxidizing activity of a biofilm grown on 15.9 mm plastic Pall rings withdrawn from a biogas desulfurizing biotrickling filter. A mechanistic model for the description of multi-step sulfide oxidation within a biotrickling filter was improved considering heterogeneous biomass concentration and biomass activity distribution along the biofilm depth. A comprehensive description of physical, chemical and biological phenomena occurring throughout gas, liquid and biofilm phases resulted in an accurate prediction of system behavior. Model calibration using experimental data estimated a biomass concentration from 320.5 to 443.0 g VSS·L-1 as well as a decrease in the fraction of active biomass of 0.5, over the 600 µm thick biofilm. Model simulations accurately reproduced experimental respirometric profiles (NRMSE <10%), demonstrating that coupling HR and microelectrodes improved model predictions in comparison to sole gas or liquid phase measurements, thus contributing to a deeper knowledge of biofilms performance in trickled bed biological systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Evaluating and modeling biological sulfur production in the treatment of sulfide-laden streams containing ammonium

  • Cueto, David|||0000-0003-0916-9788
  • Mora Garrido, Mabel|||0000-0002-2979-3601
  • Gabriel, David|||0000-0002-7713-4192
BACKGROUND: Biological treatment of effluents containing H2S and ammonium are of great interest as both can trigger serious environmental problems when disposed of. The aim of this study was to optimize the production of biosulfur from the partial oxidation of sulfide in sulfide- and ammonium-containing streams. Biological performance was evaluated under various aerating conditions and key kinetic parameters were adjusted based on an existing mathematical model adapted to this system. RESULTS: An optimal conversion of sulfide to S0 of 86% (w/w) was found at an oxidation-reduction potential (ORP) of -380 ± 10 mV and at an O2/S2- molar ratio of 0.44. Partial nitrification was observed at ORP higher than -200 mV and in excess of oxygen supply. Sulfide-oxidizing bacteria (SOB) outcompeted ammonium-oxidizing bacteria (AOB) in the competition for dissolved oxygen. In a modeling effort, the maximum specific growth rate for SOB, the sulfur shrinking kinetic constant, the maximum specific growth rate for AOB and the AOB oxygen half-saturation constant were adjusted to 10.1 day-1, 0.3 mg2/3 VSS mg-2/3 S, 1.75 day-1 and 1.5 mg L-1, respectively, during model calibration. CONCLUSIONS: Optimal S0 production was found under limiting O2 conditions in which AOB were not able to outcompete SOB. The mathematical model described satisfactorily the experimental profiles for ammonium, nitrite, sulfide and sulfate as a function of the aeration flow rate.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunable Electrochemical Sensors Based on Carbon Nanocomposite Materials towards Enhanced Determination of Cadmium, Lead and Copper in Water

  • López Fernández, Laia|||0000-0003-0033-8231
  • Bastos Arrieta, Julio|||0000-0002-8939-6253
  • Palet, Cristina|||0000-0002-7467-613X
  • Baeza, Mireia|||0000-0002-2240-6410
Many carbon materials are well-known conductive materials, widely used in the fabrication of composite electrodes. In this work, diverse allotropic forms of carbon such as graphite, MWCNTs and rGO were tested. Furthermore, these materials allow the construction of cheaper, smaller, portable, reliable and easy-to-use devices, which can be easily modified. The above-mentioned composite electrodes were developed for metal analysis in water such as Cu, Cd and Pb that, at a high concentration, can have consequences on human health. SWASV is the selected technique. It would be ideal to exploit the potential properties of mercury for metal detection by tuning the electrode's surface. Due to mercury's hazardous properties and to reduce the amount of this substance used in polarography, the use of nanoparticles is a good option due to their properties. Mercury nanoparticles were used to modify the surface of the composite electrodes to improve electroanalytical sensor response. For this reason, using these modified composite electrodes can lower detection limits and widen the linear range that can be achieved for Cd (0.05-1 mg·L-1) and Pb (0.045-1 mg·L-1). However, for Cu (0.114-1.14 mg·L-1), meaningful variations were not observed compared to the bare electrode.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The effect of slime accumulated in a long-term operating UASB using crude glycerol to treat S-rich wastewater

  • Zhou, Xudong
  • Fernandez Palacios, Eva|||0000-0002-0095-220X
  • Dorado, Antoni D.
  • Lafuente Sancho, Francisco Javier|||0000-0002-4601-9001
  • Gamisans Noguera, Xavier|||0000-0003-1856-8692
  • Gabriel, David|||0000-0002-7713-4192
An up-flow anaerobic sludge blanket (UASB) reactor targeting sulfate reduction was operated under a constant TOC/S-SO 4 2- ratio of 1.5 ± 0.3 g C/g S for 639 days using crude glycerol as carbon source. A filamentous and fluffy flocculant material, namely slime-like substances (SLS), was gradually accumulated in the bioreactor after the cease of methanogenic activity. The accumulation of SLS was followed by a decrease in the removal efficiencies and a deterioration in the performance. Selected characteristics of SLS were investigated to explore the causes of its formation and the effect of SLS on the UASB performance. Results showed that glycerol fermentation and sulfate reduction processes taking place in the reactor were mainly accomplished in the bottom part of the UASB reactor, as the sludge concentration in the bottom was higher. The accumulation of SLS in the UASB reactor caused sludge flotation that further led to biomass washout, which decreased the sulfate and glycerol removal efficiencies. Batch activity tests performed with granular sludge (GS), slime-covered granular sludge (SCGS) and SLS showed that there was no difference between GS and SLS in the mechanism of glycerol fermentation and sulfate reduction. However, the specific sulfate reduction rate of GS was higher than that of SLS, while SLS showed a higher glycerol fermentation rate than that of GS. The different rates in GS and SLS were attributed to the higher relative abundances of fermentative microorganisms found in SLS and higher relative abundances of sulfate reducing bacteria (SRB) found in GS.