Pasar al contenido principal

APLICACIONES MEDICAS DE LOS ACELERADORES LASER

RTI2018-101578-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A multi-shot target wheel assembly for high-repetition-rate, laser-driven proton acceleration

  • Peñas, J.
  • Bembibre, Adrian
  • Cortina-Gil, D.
  • Martín, L.
  • Reija, A.
  • Ruiz, C.
  • Alejo, Aaron
  • Benlliure, Jose
  • Seimetz, Michael
[EN] A multi-shot target assembly and automatic alignment procedure for laser-plasma proton acceleration at high repetition rate are introduced. The assembly is based on a multi-target rotating wheel capable of hosting more than 5000 targets, mounted on a 3D motorized stage to allow rapid replenishment and alignment of the target material between laser irradiations. The automatic alignment procedure consists of a detailed mapping of the impact positions at the target surface prior to the irradiation that ensures stable operation of the target, which alongside the purpose-built design of the target wheel, enables operation at rates up to 10 Hz. Stable and continuous laser-driven proton acceleration at 10 Hz is demonstrated, with observed cut-off energy stability about 15%., This work was supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades under grants RTI2018-101578-B-C21, RTI2018-101578-B-C22, FPI predoctorals BES-2017-08917 and PRE2019-090730, and Unidad de Excelencia Maria de Maetzu under project MdM-2016-0692-17-2, the Xunta de Galicia grants GRC ED431C 2017/54 and ED431F2023/21 and a grant of the program Grupos de investigacion consolidados (CIAICO/2022/008) financed by Generalitat Valenciana. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2021/002). This work was supported by 'la Caixa' Foundation (ID 100010434) (fellowship code LCF/BQ/PI20/11760027) and grant RYC2021-032654-I funded by MICIU/AEI/10.13039/501100011033 and by 'European Union NextGenerationEU'.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Setup for Irradiation of Cell Cultures at L2A2

  • Torralba, Alberto
  • Palenciano-Castro, Lidia
  • Reija, Alicia
  • Rigla, Juan Pablo
  • Peñas, Juan
  • Llerena, Juan José
  • Contreras-Martinez, Ramiro
  • Benlliure, José
  • Vega, Ana
  • Aguado-Barrera, Miguel Elías
  • Ruiz, Camilo
  • Seimetz, Michael
[EN] Laser-plasma proton sources and their applications to preclinical research has become a very active field of research in recent years. In addition to their small dimensions as compared to classical ion accelerators, they offer the possibility to study the biological effects of ultra-short particle bunches and the correspondingly high dose rates. We report on the design of an experimental setup for the irradiation of cell cultures at the L2A2 laboratory at the University of Santiago de Compostela, making use of a 1.2 J Ti: Sapphire laser with a 10 Hz repetition rate. Our setup comprises a proton energy separator consisting of two antiparallel magnetic fields realized by a set of permanent magnets. It allows for selecting a narrow energy window around an adaptable design value of 5 MeV out of the initially broad spectrum typical for Target Normal Sheath Acceleration (TNSA). At the same time, unwanted electrons and X-rays are segregated from the protons. This part of the setup is located inside the target vessel of the L2A2 laser. A subsequent vacuum flange sealed with a thin kapton window allows for particle passage to external sample irradiation. A combination of passive detector materials and real-time monitors is applied for measurement of the deposited radiation dose. A critical point of this interdisciplinary project is the manipulation of biological samples under well-controlled, sterile conditions. Cell cultures are prepared in sealed flasks with an ultra-thin entrance window and analysed at the nearby Fundacion Publica Galega Medicina Xenomica and IDIS. The first trials will be centred at the quantification of DNA double-strand breaks as a function of radiation dose., Projects RTI2018-101578-B-C21 and RTI2018-101578-B-C22 are funded by MCIN/AEI /10.13039/501100011033 and by FEDER "Una manera de hacer Europa". Project AICO/2020/207 is funded by Generalitat Valenciana. Supports PEJ2018-002035-A and PEJ2018-002037-A are financed by AEI and "El FSE invierte en tu futuro". Additional funding is by FPI predoctoral grant BES-2017-08917 and Unidad de Excelencia Maria de Maeztu, MdM-2016-0692-17-2. Action is co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022 and IDIFEDER/2021/004). FPGMX-IDIS research is partially supported by the Spanish Instituto de Salud Carlos III (ISCIII) funding, which is an initiative of the Spanish Ministry of Economy and Innovation partially supported by European Regional Development FEDER Funds (INT20/00071, PI19/01424, AC18/00117) and through the Autonomous Government of Galicia (Consolidation and structuring program: IN607B) given to A. Vega.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Production of carbon-11 for PET preclinical imaging using a high-repetition rate laser-driven proton source

  • Peñas, Juan
  • Alejo, Aaron
  • Bembibre, Adrian
  • Apiñaniz, Jon Imanol
  • García-García, Enrique
  • Guerrero, Carlos
  • Henares, José Luis
  • Hernández-Palmero, Irene
  • Méndez, Cruz
  • Millán-Callado, María Ángeles
  • Puyuelo-Valdés, Pilar
  • Benlliure, José
  • Seimetz, Michael
[EN] Most advanced medical imaging techniques, such as positron-emission tomography (PET), require tracers that are produced in conventional particle accelerators. This paper focuses on the evaluation of a potential alternative technology based on laser-driven ion acceleration for the production of radioisotopes for PET imaging. We report for the frst time the use of a high-repetition rate, ultraintense laser system for the production of carbon-11 in multi-shot operation. Proton bunches with energies up to 10¿14 MeV were systematically accelerated in long series at pulse rates between 0.1 and 1 Hz using a PW-class laser. These protons were used to activate a boron target via the 11B(p,n)11C nuclear reaction. A peak activity of 234 kBq was obtained in multi-shot operation with laser pulses with an energy of 25 J. Signifcant carbon-11 production was also achieved for lower pulse energies. The experimental carbon-11 activities measured in this work are comparable to the levels required for preclinical PET, which would be feasible by operating at the repetition rate of current state-of-theart technology (10 Hz). The scalability of next-generation laser-driven accelerators in terms of this parameter for sustained operation over time could increase these overall levels into the clinical PET range., This work has received financial support by the Maria de Maetzu Units of Excellence program MDM-2016-0692-17-2, and by the Spanish Ministerio de Ciencia, Innovacion y Universidades under RTI2018-098117-B-C21, RTI2018-101578-B-C21, RTI2018-101578-B-C22, and FPI predoctoral BES-2017-08917 grants, and the Xunta de Galicia grants GRC ED431C 2017/54 and ED431F2023/21. It also was supported by Generalitat Valenciana, grant AICO/2020/207. Action co-financied by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER). This work was supported by 'la Caixa' Foundation (ID 100010434) [fellowship code LCF/BQ/PI20/11760027], and grant RYC2021-032654-I funded by MCIN, AEI and by 'European Union NextGenerationEU'.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

A multi-shot target-wheel assembly for high-repetition-rate, laser-driven proton acceleration

  • Peñas, J.
  • Bembibre, A.
  • Cortina Gil, María Dolores
  • Martín, L.
  • Reija, A.
  • Ruiz, C.
  • Seimetz, M.
  • Alejo Alonso, Aaron José
  • Benlliure Anaya, José Fernando
A multi-shot target assembly and automatic alignment procedure for laser–plasma proton acceleration at high repetition rate are introduced. The assembly is based on a multi-target rotating wheel capable of hosting more than 5000 targets, mounted on a 3D motorized stage to allow rapid replenishment and alignment of the target material between laser irradiations. The automatic alignment procedure consists of a detailed mapping of the impact positions at the target surface prior to the irradiation that ensures stable operation of the target, which alongside the purpose-built design of the target wheel, enables operation at rates up to 10 Hz. Stable and continuous laser-driven proton acceleration at 10 Hz is demonstrated, with observed cut-off energy stability about 15%.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Systematic reduction of the proton-removal cross section in neutron-rich medium-mass nuclei

  • Díaz Cortés, J.
  • Benlliure, J.
  • Rodríguez-Sánchez, J.L.
  • Alvarez Pol, H.
  • Aumann, T.
  • Bertulani, C.A.
  • Blank, B.
  • Casarejos Ruiz, Enrique
  • Cortina Gil, D.
  • Dragosavac, D.
  • Föhr, V.
  • Gargano, A.
  • Gascón, M.
  • Gawlikowicz, W.
  • Heinz, A.
  • Helariutta, K.
  • Kelic Heil, A.
  • Lukić, S.
  • Montes, F.
  • Pérez-Loureiro, D.
  • Pieńkowski, L.
  • Schmidt, K.H.
  • Staniou, M.
  • Subotić, K.
  • Sümmerer, K.
  • Taieb, J.
  • Trzcińska, A.
Single-neutron and single-proton removal cross sections have been measured for medium-mass neutron- rich nuclei around Z = 50 and energies around 1000A MeV using the FRagment Separator (FRS) at GSI. The measured cross sections confirm the relative low values of the proton-removal cross sections, observed since a long time ago and not yet understood. Model calculations considering the knock- out process together with initial- and final-state interactions describe the measured neutron-removal cross sections. Proton-removal cross sections are, however, significantly over-predicted by the same calculations. The observed difference can be explained to a large extent by the knock-out of short-range correlated nucleons from dominant neutron-proton pairs in neutron-rich nuclei., Agencia Estatal de Investigación | Ref. FPA2015-69640-C2-1-P, Agencia Estatal de Investigación | Ref. RTI2018-101578-B-C21, Xunta de Galicia | Ref. ED431C 2017/54, Xunta de Galicia | Ref. ED481B-2017/002, Departamento de Energía de los Estados Unidos (DOE) | Ref. DE-FG02-08ER41533
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production of carbon‑11 for PET preclinical imaging using a high‑repetition rate laser‑driven proton source

  • Peñas, Juan
  • Alejo, Aarón
  • Bembibre, Adrián
  • Apiñaniz, Jon Imanol
  • García-García, Enrique
  • Guerrero, C.
  • Henares, José Luis
  • Hernández-Palmero, Irene
  • Méndez, Cruz
  • Millán Callado, María de los Ángeles
  • Puyuelo-Valdés, Pilar
  • Seimetz, Michael
  • Benlliure, José
Most advanced medical imaging techniques, such as positron-emission tomography (PET), require tracers that are produced in conventional particle accelerators. This paper focuses on the evaluation of a potential alternative technology based on laser-driven ion acceleration for the production of radioisotopes for PET imaging. We report for the first time the use of a high-repetition rate, ultra-intense laser system for the production of carbon-11 in multi-shot operation. Proton bunches with energies up to 10-14 MeV were systematically accelerated in long series at pulse rates between 0.1 and 1 Hz using a PW-class laser. These protons were used to activate a boron target via the 11 B(p,n) 11 C nuclear reaction. A peak activity of 234 kBq was obtained in multi-shot operation with laser pulses with an energy of 25 J. Significant carbon-11 production was also achieved for lower pulse energies. The experimental carbon-11 activities measured in this work are comparable to the levels required for preclinical PET, which would be feasible by operating at the repetition rate of current state-of-the-art technology (10 Hz). The scalability of next-generation laser-driven accelerators in terms of this parameter for sustained operation over time could increase these overall levels into the clinical PET range., This work has received financial support by the María de Maetzu Units of Excellence program MDM-2016-0692-17-2, and by the Spanish Ministerio de Ciencia, Innovación y Universidades under RTI2018-098117-B-C21, RTI2018-101578-B-C21, RTI2018-101578-B-C22, and FPI predoctoral BES-2017-08917 grants, and the Xunta de Galicia grants GRC ED431C 2017/54 and ED431F2023/21. It also was supported by Generalitat Valenciana, grant AICO/2020/207. Action co-financied by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER). This work was supported by ‘la Caixa’ Foundation (ID 100010434) [fellowship code LCF/BQ/PI20/11760027], and grant RYC2021-032654-I funded by MCIN, AEI and by ‘European Union NextGenerationEU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A multi-shot target wheel assembly for high-repetition-rate, laser-driven proton acceleration

  • Peñas, J.
  • Bembibre, A.
  • Cortina-Gil, D.
  • Martín, L.
  • Reija, A.
  • Ruiz, C.
  • Seimetz, M.
  • Alejo, A.
  • Benlliure, J.
A multi-shot target assembly and automatic alignment procedure for laser-plasma proton acceleration at high repetition rate are introduced. The assembly is based on a multi-target rotating wheel capable of hosting more than 5000 targets, mounted on a 3D motorized stage to allow rapid replenishment and alignment of the target material between laser irradiations. The automatic alignment procedure consists of a detailed mapping of the impact positions at the target surface prior to the irradiation that ensures stable operation of the target, which alongside the purpose-built design of the target wheel, enables operation at rates up to 10 Hz. Stable and continuous laser-driven proton acceleration at 10 Hz is demonstrated, with observed cut-off energy stability about 15%., This work was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades under grants RTI2018-101578-B-C21, RTI2018-101578-B-C22, FPI predoctorals BES-2017-08917 and PRE2019-090730, and Unidad de Excelencia María de Maetzu under project MdM-2016-0692-17-2, the Xunta de Galicia grants GRC ED431C 2017/54 and ED431F2023/21 and a grant of the program Grupos de investigación consolidados (CIAICO/2022/008) financed by Generalitat Valenciana. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014–2020 (IDIFEDER/2021/002). This work was supported by ‘la Caixa’ Foundation (ID 100010434) (fellowship code LCF/BQ/PI20/11760027) and grant RYC2021-032654-I funded by MICIU/AEI/10.13039/501100011033 and by ‘European Union NextGenerationEU’., With funding form the Spanish government through the “María de Maeztu Unit of Excellence” accreditation ( MdM-2016-0692-17-2)., Peer reviewed