Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Impact of geometric and hemodynamic changes on a mechanobiological model of atherosclerosis

  • Hernández-López, Patricia
  • Cilla, Myriam
  • Martínez, Miguel Á.
  • Peña, Estefanía
  • Malvè, Mauro
Background and Objective: In this work, the analysis of the importance of hemodynamic updates on a mechanobiological model of atheroma plaque formation is proposed. Methods: For that, we use an idealized and axisymmetric model of carotid artery. In addition, the behavior of endothelial cells depending on hemodynamical changes is analyzed too. A total of three computational simulations are carried out and their results are compared: an uncoupled model and two models that consider the opposite behavior of endothelial cells caused by hemodynamic changes. The model considers transient blood flow using the Navier–Stokes equation. Plasma flow across the endothelium is determined with Darcy’s law and the Kedem–Katchalsky equations, considering the three-pore model, which is also employed for the flow of substances across the endothelium. The behavior of the considered substances in the arterial wall is modeled with convection–diffusion–reaction equations, and the arterial wall is modeled as a hyperelastic Yeoh’s material. Results:Significant variations are noted in both the morphology and stenosis ratio of the plaques when comparing the uncoupled model to the two models incorporating updates for geometry and hemodynamic stimuli. Besides, the phenomenon of double-stenosis is naturally reproduced in the models that consider both geometric and hemodynamical changes due to plaque growth, whereas it cannot be predicted in the uncoupled model. Conclusions: The findings indicate that integrating the plaque growth model with geometric and hemodynamic settings is essential in determining the ultimate shape and dimensions of the carotid plaque.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tissue material properties, whole-bone morphology and mechanical behavior in the Fbn1C1041G/+ mouse model of Marfan syndrome

  • Zimmermann, Elizabeth A.
  • DeVet, Taylor
  • Cilla, Myriam
  • Albiol, Laia
  • Kavaseri, Kyle
  • Andrea, Christine
  • Julien, Catherine
  • Tiedemann, Kerstin
  • Panahifar, Arash
  • Alidokht, Sima A.
  • Chromik, Richard
  • Komarova, Svetlana V.
  • Reinhardt, Dieter P.
  • Zaslansky, Paul
  • Willie, Bettina M.
Marfan syndrome (MFS) is a connective tissue disorder caused by pathogenic mutations in FBN1. In bone, the protein fibrillin-1 is found in the extracellular matrix where it provides structural support of elastic fiber formation, stability for basement membrane, and regulates the bioavailability of growth factors. Individuals with MFS exhibit a range of skeletal complications including low bone mineral density and long bone overgrowth. However, it remains unknown if the bone phenotype is caused by alteration of fibrillin-1′s structural function or distortion of its interactions with bone cells. To assess the structural effects of the fibrillin-1 mutation, we characterized bone curvature, microarchitecture, composition, porosity, and mechanical behavior in the Fbn1C1041G/+ mouse model of MFS. Tibiae of 10, 26, and 52-week-old female Fbn1C1041G/+ and littermate control (LC) mice were analyzed. Mechanical behavior was assessed via in vivo strain gauging, finite element analysis, ex vivo three-point bending, and nanoindentation. Tibial bone morphology and curvature were assessed with micro computed tomography (μCT). Bone composition was measured with Fourier transform infrared (FTIR) imaging. Vascular and osteocyte lacunar porosity were assessed by synchrotron computed tomography. Fbn1C1041G/+ mice exhibited long bone overgrowth and osteopenia consistent with the MFS phenotype. Trabecular thickness was lower in Fbn1C1041G/+ mice but cortical bone microarchitecture was similar in Fbn1C1041G/+ and LC mice. Whole bone curvature was straighter below the tibio-fibular junction in the medial–lateral direction and more curved above in LC compared to Fbn1C1041G/+ mice. The bone matrix crystallinity was 4 % lower in Fbn1C1041G/+ mice compared to LC, implying that mineral platelets in LCs have greater crystal size and perfection than Fbn1C1041G/+ mice. Structural and mechanical properties were similar between genotypes. Cortical diaphyseal lacunar porosity was lower in Fbn1C1041G/+ mice compared to LC; this was a result of the average volume of an individual osteocyte lacunae being smaller. These data provide valuable insights into the bone phenotype and its contribution to fracture risk in this commonly used mouse model of MFS.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Impact of hypertension and arterial wall expansion on transport properties and atherosclerosis progression

  • Hernández-López, Patricia
  • Laita, Nicolás
  • Cilla, Myriam
  • Martínez, Miguel Ángel
  • Peña, Estefanía
This study explored the impact of hypertension on atheroma plaque formation through a mechanobiological model. The model incorporates blood flow via the Navier–Stokes equation. Plasma flow through the endothelium is determined by Darcy’s law and the Kedem–Katchalsky equations, which consider the three-pore model utilized for substance flow across the endothelium. The behaviour of these substances within the arterial wall is described by convection–diffusion–reaction equations, while the arterial wall itself is modelled as a hyperelastic material using Yeoh’s model. To accurately evaluate hypertension’s influence, adjustments were made to incorporate wall compression-induced wall compaction by radial compression. This compaction impacts three key variables of the transport phenomena: diffusion, porosity, and permeability. Based on the obtained findings, we can conclude that hypertension significantly augments plaque growth, leading to an over 400% increase in plaque thickness. This effect persists regardless of whether wall mechanics are considered. Tortuosity, arterial wall permeability, and porosity have minimal impact on atheroma plaque growth under normal arterial pressure. However, the atheroma plaque growth changes dramatically in hypertensive cases. In such scenarios, the collective influence of all factors—tortuosity, permeability, and porosity—results in nearly a 20% increase in plaque growth. This emphasizes the importance of considering wall compression due to hypertension in patient studies, where elevated blood pressure and high cholesterol levels commonly coexist.