RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación
Artículo científico (JournalArticle)
Mechanical properties and microstructural evolution of alumina-zirconia nanocomposites by microwave sintering
Microwave sintering has emerged in recent years as a novel method for sintering a variety of materials that have shown significant advantages
against conventional sintering procedures. This work involved an investigation of microwave hybrid fast firing of alumina–zirconia
nanocomposites using commercial alumina powder and monoclinic nanometric zirconia. The suspensions were prepared separately in order
to obtain 5, 10 and 15 vol% of ZrO2 in the alumina matrix. The samples were sintered in a monomode microwave furnace at 2.45 GHz in air at
different temperatures in the range 1200–1400 1C with 10 min of dwelling time and 200 1C/min of heating rate. The effect of sintering
temperature in densification, mechanical properties and microstructure behavior of the composites was investigated.
Higher density, hardness and Young's modulus, excellent fracture toughness properties and homogeneous microstructure were achieved by
microwave sintering in comparison to conventional heating. Microstructure analysis showed that the alumina grains had not grown significantly,
indicating that the zirconia particles provided a hindering effect on the grain growth of alumina.
Crown Copyright & 2014 Published by Elsevier Ltd and Techna Group S.r.l. All rights reserved, The authors would like to thank the Polytechnic University of Valencia (UPV) for financial support received for projects SP20120621, SP20120398 and SP20120677 and Spanish Government (TEC2012-37532-C02-01) and co-funded by ERDF (European Regional Development Funds). A. Borrell acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva contract (JCI-2011-10498) and Generalitat Valenciana by Geronimo Forteza funding (FPA/2012/022).
Proyecto:
Universitat Politècnica de València SP20120621
,
Universitat Politècnica de València SP20120398
,
Universitat Politècnica de València SP20120677
,
Ministerio de Economía y Competitividad TEC2012-37532-C02-01
,
Ministerio de Ciencia e Innovación JCI-2011-10498
,
Generalitat Valenciana FPA/2012/022