Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fabrication of near-zero thermal expansion of fully dense beta-eucryptite ceramics by microwave sintering

  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Garcia-Moreno, O.
Microwave heating is proposed as non-conventional technique for the sintering of optimal lithium aluminosilicate compositions of β-eucryptite system. The coefficient of thermal expansion and mechanical properties of the sintered samples has been studied under the influence of microwave heating. The ad hoc synthesized β-eucryptite together with the microwave sintering technique developed in this work open the opportunity to produce breakthrough materials with low or negative coefficient of thermal expansion and excellent mechanical properties, as a Young s modulus of 110 GPa. The combination of rapid heating with low energy applied by the microwave technology (eco-friendly process) and the dramatic reduction in cycle time allows densification without glass phase formation. Results of the coefficient of thermal expansion of the β-eucryptite ceramics presented here under cryogenic conditions will be of value, for example, in the future design of new composite materials for space applications, The authors would like to thank Dr. Emilio Rayon for performing the nanoindentation analysis in the Materials Technology institute (ITM) of the Polytechnic University of Valencia (UPV) and your financial support received of UPV under Projects SP20120621 and SP20120677 and Spanish Government through the Project MONIDIEL (TEC2008-04109). A. Borrell, acknowledges the Spanish Ministry of Science and Innovation for a Juan de la Cierva contract (JCI-2011-10498) and SCSIE of the University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Propiedades mecánicas y coeficiente de dilatación térmica de la beta-eucriptita sinterizada por la técnica de microondas, Mechanical properties and coefficient of thermal expansion of β-eucryptite sintered by microwave technique

  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • García-Moreno, Olga
[EN] Microwave non-conventional sintering technique allows obtaining fully dense glass-free β-eucryptite bulk material (∼99 %). A considerable difference in the densification, microstructure, coefficient of thermal expansion behaviour and mechanical properties, between conventional and non-conventional sintered specimens was observed. The hardness and Young’s modulus values obtained by microwaves at 1200 °C-5min have been relatively high, 6.8 GPa and 101 GPa, respectively, compared to conventional sintering (3.9 GPa and 58 GPa, respectively). Very low thermal expansion materials have been obtained in a wide temperature range including cryogenic temperatures (from -150 ºC to 150 ºC). The high heating rate along with the lower energy consumption makes microwave technique a clear alternative to other types of sintering methods., [ES] La técnica de sinterización no convencional de microondas permite obtener materiales de β-eucriptita en estado sólido cristalino con densidades cercanas a la teórica (∼99 %). Se ha observado una diferencia considerable en estos materiales respecto a la técnica convencional en términos de densificación, microestructura, coeficiente de expansión térmica y propiedades mecánicas. Los valores de dureza y módulo de Young obtenidos mediante sinterización por microondas a 1200 ºC-5 min han sido relativamente altos, 6.8 GPa y 101 GPa, respectivamente, en comparación con el material obtenido mediante horno convencional (3.9 GPa y 58 GPa, respectivamente). Los datos dilatométricos obtenidos, incluyendo el intervalo de temperatura criogénica (-150 ºC a +150 ºC), muestran un coeficiente de expansión térmica controlado y negativo en todo el rango de temperaturas. La combinación de un calentamiento rápido junto con la reducción drástica en el tiempo de ciclo y el ahorro energético, hace que la técnica de microondas sean una clara alternativa a otro tipo de calentamientos., Los autores desean agradecer al Dr. Emilio Rayón por la realización de los ensayos de nanoindentación en el Instituto de Tecnología de Materiales (ITM) de la Universidad Politécnica de Valencia (UPV). El apoyo financiero recibido de la UPV dentro de los proyectos SP20120621 y SP20120677 y, al gobierno español a través del proyecto (TEC2012-37532-C02-01). A. Borrell, agradece al Ministerio de Ciencia e Innovación su contrato de Juan la Cierva (JCI-2011-10498).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave, spark plasma and conventional sintering to obtain controlled thermal expansion beta-eucryptite materials

  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • García Moreno, Olga
Lithium aluminosilicate was fabricated by conventional and non-conventional sintering: microwave and spark plasma sintering, from 1200 to 1300 ºC. A considerable difference in densification, microstructure, coefficient of thermal expansion behavior and hardness and Young’s modulus was observed. Microwave technology made possible to obtain fully dense glass-free lithium aluminosilicate bulk material (>99%) with near-zero and controlled coefficient of thermal expansion and relatively high mechanical properties (7.1 GPa of hardness and 110 GPa of Young’s modulus) compared to the other two processes. It is believed that the heating mode and effective particle packing by microwave sintering are responsible to improve these properties., The authors would like to thank Dr. Emilio Rayon for performing the nanoindentation analysis in the Materials Technology institute (ITM) of the Polytechnic University of Valencia (UPV) and your financial support received of UPV under project SP20120621 and SP20120677 and Spanish government through the project (TEC2012-37532-C02-01) and cofunded by ERDF (European Regional Development Funds). A. Borrell acknowledges the Spanish Ministry of Science and Innovation for a Juan de la Cierva contract (JCI-2011-10498) and SCSIE of the University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave Technique: A Powerful Tool for Sintering Ceramic Materials

  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Miranda, Míriam
[EN] Microwave sintering has emerged in recent years as a promising technology for faster, cheaper and eco-friendlier processing of a wide variety of materials, which are regarded as significant advantages against conventional sintering procedures. The present investigation describes a technique for sintering two different ceramic materials by microwave heating: alumina-15vol.% zirconia and hydroxyapatite nanopowders. The results show that microwave sintering achieves higher density values, excellent mechanical properties and a homogeneous microstructure at lower sintering temperatures. The densities of microwave processed samples were close to the theoretical densities, and the near-net-shape of the green body was preserved without significant dimensional changes. The main advantages of microwave heating can be summarized as follows: a more flexible process, reduced processing times and production costs, and environmental benefits. Thus, microwaves are a clear alternative to conventional heating methods, using up to 70% less energy throughout the whole sintering process, This work has been carried out under a programme that supports research and development at the Polytechnic University of Valencia under multidisciplinary projects PAID2011/059, SP20120621 and SP20120677. A. Borrell acknowledges the Spanish Ministry of Science and Innovation for her JdC contract (JCI2011-10498). A. Borrell and F. L. Penaranda-Foix want to thank the Generalitat Valenciana for the grant obtained in the frame of the Program BEST/2012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical properties and microstructural evolution of alumina-zirconia nanocomposites by microwave sintering

  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Pallone, Eliria
Microwave sintering has emerged in recent years as a novel method for sintering a variety of materials that have shown significant advantages against conventional sintering procedures. This work involved an investigation of microwave hybrid fast firing of alumina–zirconia nanocomposites using commercial alumina powder and monoclinic nanometric zirconia. The suspensions were prepared separately in order to obtain 5, 10 and 15 vol% of ZrO2 in the alumina matrix. The samples were sintered in a monomode microwave furnace at 2.45 GHz in air at different temperatures in the range 1200–1400 1C with 10 min of dwelling time and 200 1C/min of heating rate. The effect of sintering temperature in densification, mechanical properties and microstructure behavior of the composites was investigated. Higher density, hardness and Young's modulus, excellent fracture toughness properties and homogeneous microstructure were achieved by microwave sintering in comparison to conventional heating. Microstructure analysis showed that the alumina grains had not grown significantly, indicating that the zirconia particles provided a hindering effect on the grain growth of alumina. Crown Copyright & 2014 Published by Elsevier Ltd and Techna Group S.r.l. All rights reserved, The authors would like to thank the Polytechnic University of Valencia (UPV) for financial support received for projects SP20120621, SP20120398 and SP20120677 and Spanish Government (TEC2012-37532-C02-01) and co-funded by ERDF (European Regional Development Funds). A. Borrell acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva contract (JCI-2011-10498) and Generalitat Valenciana by Geronimo Forteza funding (FPA/2012/022).