Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Automatic Cardiac Gating of Small-animal PET from List-mode Data

  • Herraiz, J. L.
  • Udías, José Manuel
  • Vaquero López, Juan José
  • Cusso Mula, Lorena
  • Desco Menéndez, Manuel
Proceedings of: 11th International Meeting on Fully Three-Dimensional Image Reconstruction in Radiology and Nuclear Medicine (Fully 3D 2011). 11-15 July, 2011, Potsdam, Germany., This work presents a method to obtain automatically the cardiac gating signal in a PET study of rats, by employing the variation with time of the counts in the cardiac region, that can be extracted from list-mode data. In an initial step, the cardiac region is identified in the image space by backward-projecting a small fraction of the acquired data and studying the variation with time of the counts in each voxel inside said region, with frequencies within 2 and 8 Hz. The region obtained corresponds accurately to the left-ventricle of the heart of the rat. In a second step, the lines-of-response (LORs) connected with this region are found by forward-projecting this region. The time variation of the number of counts in these LORs contains the cardiac motion information that we want to extract. This variation of counts with time is band-pass filtered to reduce noise, and the time signal so obtained is used to create the gating signal. The result was compared with a cardiac gating signal obtained from an ECG acquired simultaneously to the PET study. Reconstructed gated images obtained from both gating information are similar. The method proposed demonstrates that valid cardiac gating signals can be obtained for rats from PET list-mode data., This work was supported in part by AMIT Project funded by CDTI (CENIT Programme), UCM (Grupos UCM, 910059), CPAN (Consolider-Ingenio 2010, CSPD-2007-00042), RECAVA-RETIC network, Comunidad de Madrid (ARTEMIS S2009/DPI-1802), Ministerio de Ciencia e Innovación, Spanish Government (ENTEPRASE grant, PSE-300000-2009-5 and TEC2007-64731/TCM) and European Regional funds, Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

GPU-based fast iterative reconstruction of fully 3-D PET sinograms

  • Herraiz, J. L.
  • España, Samuel
  • Cabido, R.
  • Montemayor, A. S.
  • Desco Menéndez, Manuel
  • Vaquero López, Juan José
  • Udías, José Manuel
This work presents a graphics processing unit (GPU)-based implementation of a fully 3-D PET iterative reconstruction code, FIRST (Fast Iterative Reconstruction Software for [PET] Tomography), which was developed by our group. We describe the main steps followed to convert the FIRST code (which can run on several CPUs using the message passing interface [MPI] protocol) into a code where the main time-consuming parts of the reconstruction process (forward and backward projection) are massively parallelized on a GPU. Our objective was to obtain significant acceleration of the reconstruction without compromising the image quality or the flexibility of the CPU implementation. Therefore, we implemented a GPU version using an abstraction layer for the GPU, namely, CUDA C. The code reconstructs images from sinogram data, and with the same System Response Matrix obtained from Monte Carlo simulations than the CPU version. The use of memory was optimized to ensure good performance in the GPU. The code was adapted for the VrPET small-animal PET scanner. The CUDA version is more than 70 times faster than the original code running in a single core of a high-end CPU, with no loss of accuracy., This work was supported in part by AMIT Project funded by CDTI (CENIT Programme), UCM (Grupos UCM, 910059), CPAN (Consolider-Ingenio 2010, CSPD-2007-00042), RECAVA- RETIC network, Comunidad de Madrid (ARTEMIS S2009/DPI-1802), Ministerio de Ciencia e Innovación, Spanish Government (ENTEPRASE grant, PSE-300000-2009-5 and TEC2007-64731/TCM), and European Regional funds., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Viabilidad del uso de fotodetectores SiPM en sistemas PET/IRM

  • Vaquero López, Juan José
  • Desco Menéndez, Manuel
  • Vicente, Esther
  • España, Samuel
  • Picado, E.
  • Cal González, Jacobo
  • Fraile, L. M.
  • Herraiz, J. L.
  • Udías, José Manuel
Actas de: XXVIII Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2010). Madrid, 24-26 de noviembre de 2010., El fotomultiplicador de silicio (SiPM) es un detector compuesto por una matriz de fotodiodos funcionando en modo avalancha, también conocido como modo Geiger. Se trata de un dispositivo de alta eficiencia en la detección de fotones que, por tratarse de un semiconductor, es compacto, teóricamente insensible a campos magnéticos, y de bajo coste. Además, la electrónica asociada es sencilla y podría integrarse en el mismo dispositivo. Estas características hacen de este componente un buen candidato para construir detectores de rayos gamma para imagen médica nuclear (PET y SPECT). En este trabajo se evalúan las prestaciones de tres detectores diferentes de 1 x 1 mm2 y una matriz de 2 x 2 SiPMs (6 x 6 mm² área activa total). Se ha analizado la dependencia de los parámetros operacionales del dispositivo en presencia de campos magnéticos estáticos intensos y de los campos de radiofrecuencia generados por un sistema de IRM preclínico, en condiciones extremas de trabajo en cuanto a intensidad y frecuencia de conmutación de los gradientes de campo. Al mismo tiempo se ha verificado que la presencia de estos dispositivos en la zona de imagen de la RM no afecta a la calidad de la misma., Este trabajo ha sido financiado por los proyectos TEC2007-64731, TEC 2008-06715-C02-1 del Ministerio de Ciencia e Innovación, por la RETIC-RECAVA del Ministerio de Sanidad y Consumo, por el programa ARTEMIS S2009/DPI-1802 de la Comunidad de Madrid, por el proyecto europeo FMT-XCT FP7-201792, los programas FPA2007-62216, TEC2008-06715-C02-01, UCM (Grupos UCM; 910059), CPAN (Consolider-Ingenio 2010) y CSPD-2007-00042. Parte de los cálculos realizados en este trabajo se han hecho en el ‘‘High Capacity Cluster for Physical Techniques’’ de la UCM, financiados en parte por la UE bajo el programa FEDER, y en otra parte por la UCM., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Segmentación automática de estudios PET cardíacos con ¹³NH_3 basada en correlación iterativa

  • Mateos-Pérez, José M.
  • García Villalba, Carmen
  • Abella García, Mónica
  • Desco Menéndez, Manuel
  • Vaquero López, Juan José
Actas de: XXVIII Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2010). Madrid, 24-26 de noviembre de 2010., La obtención de la función de entrada en estudios dinámicos de corazón a partir de la imagen PET se realiza habitualmente mediante la selección previa de una región de interés (ROI) o utilizando procedimientos de análisis factorial para encontrar aquellas curvas actividad/tiempo que mejor se adaptan a la función de entrada. En este trabajo se presenta un método novedoso de segmentación automática y obtención de la función de entrada que utiliza mapas de correlación calculados sobre estudios dinámicos que emplean ¹³NH_3 como trazador. Partiendo de un modelo analítico inicial, se buscan las curvas temporales más parecidas en el estudio real empleando la correlación. Tomando como datos estas curvas se calculan nuevos modelos con los que realizar sucesivas iteraciones. El resultado final es tanto una segmentación automática como la curva de actividad/tiempo de cada región segmentada., Ministerio de Ciencia e Innovación, TEC2007-64731, TEC 2008-06715-C02-1, la RETIC-RECAVA del Ministerio de Sanidad y Consumo, y el programa ARTEMIS S2009/DPI-1802 de la Comunidad de Madrid., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Contribución de congreso (ConferenceOutput)

Corrección de atenuación de imágenes PET usando datos de TAC en el escáner para animales pequeños Argus PET/CT

  • Vicente, Esther
  • Udías, Ángel
  • López Herraiz, Joaquín
  • Udías, José Manuel
  • Desco Menéndez, Manuel
  • Vaquero López, Juan José
Actas de: XXVIII Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2010). Madrid, 24-26 de noviembre de 2010., Existen diversos efectos físicos que degradan la calidad de la imagen PET, como por ejemplo la atenuación que sufren los fotones al atravesar el cuerpo en estudio. Este efecto reduce el número de fotones detectados, pero puede corregirse si se dispone de información anatómica del objeto. En este trabajo se describe la corrección de atenuación basada en una imagen TAC para el escáner de animales pequeños Argus PET/CT con imágenes PET reconstruidas con el algoritmo iterativo 3DOSEM., Este trabajo ha sido financiado en parte por el MEC (FPA2007-62216), la UCM (Grupos UCM, 910059), el CPAN (Consolider-Ingenio 2010, CSPD-2007-00042), la red RECAVA-RETIC el proyecto ARTEMIS (S2009/DPI-1802, Fondo Europeo de Desarrollo Regional), el proyecto ENTEPRASE (PSE-300000-2009-5, MICINN. España), por los proyectos del Ministerio de Ciencia e Innovación, TEC2007-64731, TEC 2008-06715-C02-1, la RETIC-RECAVA del Ministerio de Sanidad y Consumo, y el proyecto EU FP7 FMT-XCT-201792., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Automatic Cardiac Self-Gating of Small-Animal PET Data

  • Herraiz, J. L.
  • Herranz, Elena
  • Cal González, Jacobo
  • Vaquero López, Juan José
  • Desco Menéndez, Manuel
  • Cusso Mula, Lorena
  • Udías, José Manuel
Purpose: The cardiac gating signal (CGS) in positron emission tomography (PET) studies is usually obtained from an electrocardiography (ECG) monitor. In this work, we propose a method to obtain the CGS in small-animal PET using the acquired list-mode data without using any hardware or end-user input. Procedures: The CGS was obtained from the number of coincidences over time acquired in the lines-of-response connected with the cardiac region. This region is identified in the image as its value changes with frequencies in the range of 3 to 12 Hz. The procedure was tested in a study with 29 Wistar rats and 6 mice injected with 2-deoxy-2-[18F]fluoro-D-glucose, which underwent a 45-min single-bed list-mode PET scan of the heart syncronized with an ECG. The estimated signals and the reconstructed images using eight-gated frames were compared with the ones obtained using the ECG signal from the monitor. Results: The differences of the PET-based CGS with respect to the ECG relative to the duration of the heartbeats were 5.6 % in rats and 11.0 % in mice. The reconstructed gated images obtained from the proposed method do not differ qualitatively with respect to the ones obtained with the ECG. The quantitative analysis of both set of images were performed measuring the volume of the left ventricle (LV) of the rats in the end-of-systole and end-of-diastole phase. The differences found in these parameters between both methods were below 12.1 % in the ESV and 9.3 % in the EDV with a 95 % confidence interval, which are comparable to the accuracy (7 %) of the method used for segmenting the LV. Conclusion: The proposed method is able to provide a valid and accurate CGS in small-animal PET list-mode data. the ones obtained using the ECG signal from the monitor., This work was supported in part by Consejería de Educación, Juventud y Deporte de la Comunidad de Madrid (Spain) through the Madrid-MIT M+Visión Consortium, Comunidad de Madrid (S2013/MIT-3024 TOPUS-CM), UCM (Grupos UCM, 910059), CPAN (Consolider-Ingenio 2010, CSPD-2007-00042), RIC-RETIC network, Spanish MINECO (RD12/0042/0057),Ministerio de Ciencia e Innovación, Spanish Government (ENTEPRASE grant, PSE-300000-2009-5 and TEC2007-64731/TCM), and European Regional funds.