Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A very fast high-order flux reconstruction for Finite Volume schemes for Computational Aeroacoustics

  • Ramírez, Luis
  • Fernández-Fidalgo, Javier
  • París, José
  • Deligant, Michaël
  • Khelladi, Sofiane
  • Nogueira, Xesús
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] Given the small wavelengths and wide range of frequencies of the acoustic waves involved in Aeroacoustics problems, the use of very accurate, low-dissipative numerical schemes is the only valid option to accurately capture these phenomena. However, as the order of the scheme increases, the computational time also increases. In this work, we propose a new high-order flux reconstruction in the framework of finite volume (FV) schemes for linear problems. In particular, it is applied to solve the Linearized Euler Equations, which are widely used in the field of Computational Aeroacoustics. This new reconstruction is very efficient and well suited in the context of very high-order FV schemes, where the computation of high-order flux integrals are needed at cell edges/faces. Different benchmark test cases are carried out to analyze the accuracy and the efficiency of the proposed flux reconstruction. The proposed methodology preserves the accuracy while the computational time relatively reduces drastically as the order increases., L. Ramírez and X. Nogueira acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia (Grant #ED431C 2022/06)., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A first order FEM-based formulation for the analysis of molecular structures with bonded interactions

  • Fernández San Miguel, Andrés
  • Ramírez, Luis
  • Couceiro, Iván
  • Navarrina, Fermín
[Abstract] In this paper we present a formulation, denoted as the Molecular Element Method, that allows, given a certain force field, the possibility of performing a first order analysis as is common in structural mechanics. The stiffness matrices have been obtained in an exact way, without the need to resort to any assumptions other than those used to define the force field. Obtaining these matrices analytically allows the exploitation of algorithms and techniques typical of finite elements, being able to perform both static and vibration mode analysis independently of the molecular geometry. In this aspect, the formulation has been validated by studying the frequencies and vibration modes of several molecules, comparing with both theoretical and experimental results. Values of the modulus of elasticity of both graphene sheets and carbon nanotubes have also been obtained in accordance with the values present in the literature. Finally, the formulation shows its potential allowing to obtain the flexural wave dispersion in nanotubes compared to results using Tersoff-Brenner potentials and non-local elasticity models., The authors acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia (grant #ED431C 2022/06). Andrés Fernández-San Miguel also acknowledges the FPI grant PRE2022-102024 and the help provided by Strachan Group during his stay at Purdue University., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Stability analysis of single-well cylindrical–spherical salt caverns for green hydrogen storage in bedded formations

  • Soage Quintáns, Manuel Andrés
  • Navarrina, Fermín
  • Juanes, Rubén
  • París, José
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
[Abstract]: This study evaluates the viability of single-well spherical–cylinder salt caverns (SWCSs) for green hydrogen storage in bedded salt formations. Using numerical simulations, we demonstrate their ability to store significant volumes of energy, up to hundreds of GWh. SWCSs, designed with a single vertical well to avoid the horizontal drilling and multi-step dilution processes, provide a structurally viable and cost-effective alternative to twowell horizontal caverns (TWHs). These caverns take advantage of the horizontal dimensions of the bedded formations within their vertical constraints. Given the expanding role of hydrogen in global energy systems, the adoption of SWCSs can enhance the storage capacity and operational flexibility of systems associated with the hydrogen economy. Future studies should validate these findings experimentally to promote the implementation of SWCSs., This research has been partially funded by the Ministry of Universities of the Spanish Government (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, ‘‘Margarita Salas’’ Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20), by strategic projects oriented toward the ecological transition and the digital transition of the Ministry of Science and Innovation: GREEN-HUGS (grant #TED2021-129991B-C31 and grant #TED2021- 129991B-C32) and NEPTUNE (grant #TED2021-129805B-I00), by the Department of Education and University Planning of the Xunta de Galicia (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering of the Universidade da Coruña, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Tesis doctoral (DoctoralThesis)

Estimation of Fatigue Damage of Offshore Wind Turbine Jackets Using Numerical Simulations and Artificial Neural Networks

  • Towaiq, Ahmad
[Abstract] This thesis studies fatigue damage in welded joints of jacket substructures for offshore wind turbines (OWTs) and proposes a practical way to estimate junction-level damage at low computational cost during early design. The motivation is straightforward: jackets are attractive in the 40–60 m water-depth range, but the large number of welded tubular joints makes fatigue a design driver. Conventional time-domain simulations followed by joint-level fatigue checks are accurate but expensive when many jacket alternatives must be screened. The goal here is to keep the physics and standard practice in view while reducing computational cost to make broad design exploration feasible. The work is structured in three parts. First, a finite-element (FE) model is built for a reference OWT with a jacket substructure. The structure is represented as a 3D frame of circular steel tubes with Bernoulli beam elements. Environmental loading is parameterized compactly with four quantities: wind direction, annual mean wind speed, a wind–wave factor linking wind to wave height, and a wind non-uniformity factor that controls how short-interval signals compound to one year. Wave forces are computed with Airy kinematics and Morison’s equation. Damping is handled by small modal ratios appropriate for fixed steel structures. Modal analysis is performed, and the system is solved using the Method of Modal Superposition. The model is checked against the OC4 jacket; the first modes and frequencies agree well, which gives confidence in the structural modeling. A fatigue computation workflow is implemented. Nominal FE stresses are converted to hot-spot stresses using Efthymiou’s parametric equations for stress concentration factors in tubular joints. The hot-spot stress time series are rainflow-counted to obtain stress-range cycles, which are then evaluated using an appropriate S–N curve. Damage is accumulated by Miner’s rule. The analyses are repeated for numerous structural scenarios involving different geometrical and loading combinations. The resulting damage distribution exhibits a strong skew toward very small damages. A supervised artificial neural network (ANN) is trained as a metamodel to approximate the physics-based pipeline at junction level. Each junction is encoded by 30 features that summarize (i) global jacket geometry, (ii) global loading parameters, and (iii) local joint information. The model is a fully connected multilayer perceptron with ReLU activations and a linear output; training uses Adam and mean-squared error with Early Stopping. Hyperparameter grids are run over depth, width, and batch size., This work has been partially supported by Grant #ED431C 2022/06 of the Consellería de Educación, Universidade e Formación Profesional of the Xunta de Galicia. This work also acknowledges the support provided by Grant PID2021-125447OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and the funds by Grant TED2021-129805B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, and by Grant PID2024- 160181OB-I00 of MCIN/AEI., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Data-driven Riemann solvers: A neural network approach and a hybrid solver

  • Nogueira, Xesús
  • Ramos, Lucía
  • Seijo Conchado, Sonia
  • Couceiro, Iván
  • Khelladi, Sofiane
  • Ramírez, Luis
[Abstract] The accurate and efficient numerical solution of the Riemann problem is the basis of Godunov-type schemes. Approximate Riemann solvers are widely used for their efficiency, although they exhibit inaccuracies and instabilities in challenging regimes such as strong rarefactions or near-vacuum conditions. This work explores the use of deep neural networks (NNs) to address these limitations. We present two distinct data-driven frameworks: first, a NN-based solver trained to predict the exact solution of the Riemann problem, and second, a high-performance hybrid scheme. The hybrid approach uses the standard Harten–Lax–van Leer-contact (HLLC) Riemann solver as the main solver, enhanced with a computationally inexpensive, physics-based detector that identifies interfaces where the HLLC solution is likely to be inaccurate or to fail. At these interfaces, the scheme selectively uses the pretrained NN to ensure a more accurate solution. Through a series of benchmark tests, we show that the NN solver accurately reproduces the exact solution of the Riemann problem, but at a significant computational cost. In contrast, the proposed hybrid solver achieves a comparable level of accuracy to the NN solver, while it requires nearly the same computational cost as the standard HLLC solver., X. Nogueira and L. Ramírez acknowledge the support provided by the [Grant PID2021- 125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. L. Ram´ırez and I. Couceiro acknowledge the funds by MCIU/AEI [Grant PID2024-160181OB-I00]. They also acknowledge the funding provided by the Xunta de Galicia (grant #ED431C 2022/06). L. Ramos acknowledges the support from the Xunta de Galicia through (grant #ED431C 2024/33)., Xunta de Galicia; ED431C 2022/06, Xunta de Galicia; ED431C 2024/33
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Pore-scale simulation of multiphase flows using equations of state that preserve the correct surface tension

  • Fernández-Fidalgo, Javier
  • Cueto-Felgueroso Landeira, Luis
  • Ramírez, Luis
  • Martínez, Abel
  • Nogueira, Xesús
[Abstract:] Surface tension plays a crucial role in determining the interfacial behavior between partially miscible fluid systems, and affects the overall dynamics of phase transition processes. Accurate modeling of surface tension is crucial for understanding and predicting various phase transition phenomena, such as capillary-driven flows, droplet formation, and interfacial dynamics. Cubic equations of state (EoS), such as the van der Waals (vdW) model, incorporate two corrective terms to account for intermolecular interactions. These terms improve the predictions of the equation of state at high pressures and low temperatures, where intermolecular forces become significant; however they also affect to the effective surface tension when the EoS is used in combination with diffuse-interface models of multiphase systems. The ability to capture the correct surface tension is essential in pore-scale models flow through permeable media, particularly in capillary-dominated flow regimes. For typical geological or industrial pore sizes the effective surface tension obtained using standard equations of state may be several orders of magnitude larger than the physical value, which greatly affects the accuracy and physical fidelity of the simulations. In this work we present a methodology that allows diffuse-interface numerical methods to reproduce the physical surface tension in pore-scale simulations of multiphase flow. The proposed methodology is applied to the simulation of interfacial processes at arbitrary length scales while honoring the physical surface tension driving capillary phenomena., J. Fernández-Fidalgo acknowledges the support provided by “Ayudas para la recualificación del sistema universitario español para 2021–2023. Modalidad Margarita Salas RSU.UDC.MS20” by the Ministerio de Universidades of the Spanish Government and European Union through the NextGenerationEU funds. L. Cueto-Felgueroso acknowledges the support provided by Spanish Agencia Estatal de Investigación and the Ministerio de Ciencia e Innovación (10.13039/501100011033) through grant HydroPore PID2019-106887GB-C33. L. Ramírez and X. Nogueira acknowledge the support provided by [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” . They also acknowledge the funding provided by the Xunta de Galicia (grant #ED431C 2022/06)., Ministerio de Universidades; RSU.UDC.MS20, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Effect of a gunite lining on the stability of salt caverns in bedded formations for hydrogen storage

  • Méndez-Vázquez, Santiago
  • Soage Quintáns, Manuel Andrés
  • Navarrina, Fermín
  • París, José
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
  • Juanes, Rubén
[Abstract:] In this paper, a novel methodology to improve the structural behaviour and durability of bedded salt caverns for hydrogen storage is proposed. The suggested technology consists in applying a gunite lining over the whole cavern surface by means of a pneumatic air blowing. This continuous flow projected at high speed onto the cavern surface produces a self-compacted gunite facing. The effect of adding a gunite lining on the structural performance of a bedded salt cavern is analysed. The nonlinear finite element method is then applied to solve the inherent nonlinear solid mechanics problem. It is shown that reinforcing salt caverns with a gunite lining improves the cavern behaviour, specially in the case of caverns located within a horizontal salt stratum confined between other strata. When dealing with these salt formations, the stratum geometry limits the cavern height. In general, wider caverns that exhibit larger displacements are required to achieve a huge storage capacity. Moreover, these caverns can be located at a considerable depth, where the temperature has an important role on the creep deformation process. Therefore, the proposition of stabilization techniques is required to ensure both their structural integrity and the ground subsidence. This technology allows the safe exploitation of salt caverns located at bedded-type stratified horizontal salt formations., This research has been partially funded by strategic projects oriented towards the ecological transition and the digital transition of the Ministry of Science and Innovation: GREEN-HUGS, Spain (grant #TED2021-129991B-C31 and grant #TED2021-129991B-C32) and NEPTUNE, Spain (grant #TED2021-129805B-I00), by the Ministry of Science, Innovation and Universities of the Spanish Government, Spain (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, “Margarita Salas” Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20), by Department of Education and University Planning of the Xunta de Galicia, Spain (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering of the Universidade da Coruña, Spain., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Machine learning-based WENO5 scheme

  • Nogueira, Xesús
  • Fernández-Fidalgo, Javier
  • Ramos, Lucía
  • Couceiro, Iván
  • Ramírez, Luis
[Abstract]: Machine learning (ML) is becoming a powerful tool in Computational Fluid Dynamics (CFD) to enhance the accuracy, efficiency, and automation of simulations. Currently, in the design of shock-capturing methods, there is still a heavy reliance on the expertise and scientific knowledge of each author, particularly in nonlinear components such as smoothness indicators and weighting functions. ML has the potential to reduce this dependency, since by leveraging large datasets, they can learn intricate patterns and make accurate predictions of these functions. In this work we present a neural network that compute the weighting functions in the WENO5 scheme. The proposed WENO5-NN scheme generalizes well for different resolutions, and in most of the cases tested, it outperforms the classical WENO5-JS scheme., X. Nogueira and L. Ramírez acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia (grant #ED431C 2022/06)., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Isogeometric topology optimization of structures using the overweight approach

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this paper, a 2D isogeometric formulation of the material distribution for structural topology optimization considering minimum weight and local stress constraints using the overweight approach is proposed. The aim of this isogeometric formulation is to provide solutions with high spatial definition using a lower number of design variables in comparison with the formulations previously developed to define the material layout. Despite of this, an important number of local stress constraints has to be considered in the solution of the problem. For this purpose, an Overweight Constraint is used to consider all of them. The structural analysis is performed by means of the Isogeometric Analysis (IGA) and the distribution of material is modeled by means of quadratic B-splines. Moreover, the optimization is addressed by means of the Sequential Linear Programming algorithm (SLP) that is driven by the information provided by a full first-order sensitivity analysis extension of the IGA formulation. Finally, the proposed formulation is tested by means of some benchmark problems, and the results show that the isogeometric formulation provides solutions with high spatial definition. A comparison with a Finite Element Method (FEM) topology optimization formulation is included., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been partially supported by the “Xunta de Galicia (Secretaría Xeral de Universidades)” and the European Union (European Social Fund—ESF) through grant ED481A-2016/387, by the Spanish Government “(Ministerio de Universidades)” through “Margarita Salas grants for the training of new PhD-2022” [RSU.UDC.MS25], by Feder funds of the European Union to the Spanish Government (“Ministerio de Economía y Competitividad”) through grants DPI2015-68341-R and RTI2018-093366-B-I00, by the Spanish Government “(Ministerio de Ciencia e Innovación)” through “Knowledge generation projects” [PID2021-125447OB-I00] and through “Strategic projects oriented to the ecological and digital transition” of the “Plan de recuperación, transformación y resiliencia” [TED2021-129991B-C31] and [TED2021-129805B-100] with FEDER and EU Next-Generation funds, by the “Xunta de Galicia” (“Consellería de Educación, Universidade e Formación Profesional”) through grants GRC2014/039 and GRC2018/41, by the “Xunta de Galicia” “(Consellería de Cultura, Educación, Formación Profesional y Universidades)” through “Grants for the consolidation and structuring of competitive research units of the Galician University System: Competitive reference group” [ED431C 2022/06], and by research fellowships of the University of A Coruña and the “Fundación de la Ingeniería Civil de Galicia”., Xunta de Galicia; ED481A-2016/387, Xunta de Galicia; GRC2014/039, Xunta de Galicia; GRC2018/41, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Very High Order Finite Volume Solver for Multi Component Two-Phase Flow with Phase Change Using a Posteriori Multi-Dimensional Optimal Order Detection

  • Deligant, Michaël
  • Romero-Casado, Carlos-Jesús
  • Nogueira, Xesús
  • Ramírez, Luis
  • Specklin, Mathieu
  • Bakir, Farid
  • Khelladi, Sofiane
[Abstract]: In this work we propose a very high-order compressible finite volume scheme with a posteriori stabilization for the computation of multi-component two-phase flow with phase change. It is based on finite volume approach using moving least squares (MLS) reproducing kernels for high order reconstruction of the Riemann states. Increased robustness is achieved by using the multi-dimensional optimal order detection (MOOD) method to get a high-accurate and low dissipation scheme while maintaining boundedness and preventing numerical oscillations at interfaces and strong gradient zones. The properties of the proposed framework are demonstrated on classical test problems starting with convergence order verification on simple scalar advection test cases. More complex shock and more stringent tube tests with various water, steam and air concentration are then simulated and compared with available references in the literature. Finally, the ability of the proposed approach to compute multi-component flows with phase change is illustrated with the simulation of a liquid oxygen jet in gaseous hydrogen., Xesús Nogueira and Luis Ramírez acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI / 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia, Spain (grant #ED431C 2022/06). LIFSE laboratory gratefully acknowledges the funding of the PhD work of Carlos-Jesús Romero-Casado from the Ariane Group and the Agence Nationale de la Recherche Technologique (ANRT-CIFRE N°2014/1493)., Xunta de Galicia; ED431C 2022/06, France. Agence Nationale de la Recherche Technologique; ANRT-CIFRE N°2014/1493
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Viscoplastic analysis of salt caverns under time-asymmetric pressure cycling: definition and validation of a dimensionless operational rule with real case data

  • Figueiras Velo, Francisco
  • Soage Quintáns, Manuel Andrés
  • París, José
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
[Abstract]: Operational asymmetry is a characteristic feature of underground gas storage systems—particularly in salt caverns—where injection phases are typically longer and steadier than withdrawal phases, which are shorter and more abrupt in response to fluctuating energy demand. Although large-scale hydrogen storage in salt caverns remains under development, similar operational patterns are expected once such facilities reach commercial maturity. Understanding how this temporal imbalance influences the mechanical behavior of the cavern is therefore important for assessing long-term performance and supporting the development of robust operational strategies for future hydrogen storage systems. This study introduces a dimensionless parameter, 𝜒 , to quantify the temporal asymmetry of cyclic operation. 𝜒 accounts not only for the residence times at high and low pressure but also for the different durations required to reach and leave these states. It is defined as the ratio between the effective durations of the high-pressure and low-pressure stages, including both the holding and ramp phases. The numerator represents the total effective time under high-pressure conditions, which includes half of the filling ramp (0.5𝜏fill ), the full high-pressure holding phase (𝜏WGP ), and half of the withdrawal ramp (0.5𝜏withd ). The denominator represents the complementary effective time under low-pressure conditions, consisting of half of the withdrawal ramp (0.5𝜏withd ), the full low-pressure holding phase (𝜏CGP ), and half of the filling ramp (0.5𝜏fill ). This formulation expresses the relative exposure of the rock mass to stabilizing (high-stress) versus creep-promoting (low-stress) conditions. A viscoplastic numerical model is developed to reproduce the time-dependent deformation of salt under cyclic pressure loading. Two measurable indicators are analyzed: the vertical displacement at the cavern roof and the volumetric shrinkage associated with viscoplastic mechanical closure. Results show that temporal asymmetry exerts a dominant control on the long-term mechanical response. When 𝜒 > 1 — indicating longer effective residence under high pressure — the cavern evolves toward a steady-state equilibrium; when 𝜒 < 1, viscoplastic deformation accelerates, promoting mechanical cavern closure. Comparison with operational data from three underground natural gas storage facilities in the United States is consistent with the 𝜒 ranges associated with the stability trends identified numerically. The proposed parameter 𝜒 thus provides a physically grounded and practical first-order indicator for interpreting long-term mechanical behavior in future hydrogen storage caverns, within the scope of a viscoplastic mechanical framework that does not explicitly account for damage, fracture, or permeability evolution., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was supported by the Ministry of Universities of Spain through the Margarita Salas Program (RD 289/2021), and by strategic projects oriented toward the ecological and digital transitions of the Ministry of Science and Innovation: GREEN-HUGS (grants #TED2021-129991B-C31 and #TED2021-129991B-C32) and NEPTUNE (#TED2021-129805B-I00). Additional support was provided by the project TOPACIUS (#PID2023-146793OB-100), the Department of Education and University Planning of the Xunta de Galicia (#ED431C 2022/06), and by the Group of Numerical Methods in Engineering (GMNI) at the Universidade da Coruña/CISUG., Financiado para publicación en acceso aberto: CRUE-CSIC, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Otros (Other)

Towards high accurate meshless methods for free surface flows

  • José María Maciñeira Ortiz de Urbina
Proxecto técnico do Máster en Enxeñaría Civil, [Abstract] Nowadays, advances in engineering and Computational Fluid Dynamics (CFD) have led us to face problems with more complex geometries, larger deformations and higher accuracy needs. Traditionally, mesh – based methods such as Finite Element Method (FEM) or Finite Volume Method (FVM), have been employed to solve this CFD problems, but with today’s computational facilities, meshless methods have become very popular for dealing with the ones mentioned before, like free-surface or wave breaking problems. In this work, the set of equations governing the behavior of fluids will be developed, with a detailed description of their different shapes and the physical foundations on which they are based. Finally, meshless methods will be introduced, explaining its main basis and presenting some high–accurate meshless methods based on the use of Moving Least Squares (MLS) approximants for the resolution of the Weakly-Compressive Navier Stokes equations on an ALE approach. These methods were developed to overcome some of the grand challenges of traditional Lagrangian SPH methods, like boundary conditions, accuracy and the treatment of the free surface., [Resumen] Hoy en día, los avances en ingeniería y en la Dinámica de Fluidos Computacional (CFD) nos lleva a afrontar problemas con geometrías más complejas, grandes deformaciones y mayores exigencias de precisión. Tradicionalmente, los métodos con malla como el Método de los Elementos Finitos (FEM) o el Método de los Volúmenes Finitos (FVM), han sido empleados para resolver problemas de CFD, pero con las facilidades de cálculo actuales, los métodos sin malla han ido ganando popularidad para afrontar problemas como los descritos anteriormente, como por ejemplo problemas de lámina libre o de rotura de oleaje. En este trabajo se realizará el desarrollo del set de ecuaciones que rigen el comportamiento de los fluidos, con una descripción detallada de las distintas formas que tienen y de los fundamentos físicos sobre los que se basan. Finalmente, se realizará una introducción a los métodos sin malla, explicando sus bases principales y presentando métodos sin malla de alta precisión basados en el uso de aproximaciones tipo Moving Least Squares (MLS) para la resolución de las ecuaciones de Navier Stokes débilmente compresible en forma ALE. Estos métodos se desarrollan para afrontar algunos de los grandes retos a los que se enfrentan los métodos Lagrangianos tradicionales, como las condiciones de contorno, la precisión o el tratamiento de la lámina libre., [Resumo] Hoxe en dia, os avances na enxeñaría e na Dinámica de Fluídos Computacional (CFD) lévannos a abordar problemas con xeometrías máis complexas, grandes deformacións e maiores esixencias de precisión. Tradicionalmente, os métodos con malla como o Método dos Elementos Finitos(FEM) ou o Método dos Volumes Finitos (FVM), empregáronse para resolver problemas de CFG, pero coas capacidades de cálculo actuais, os métodos sen malla gañaron popularidade para abordar problemas como os descritos anteriormente, como por exemplo problemas de lámina libre ou de rotura de ondas. Este traballo desenvolverá o conxunto de ecuacións que rexen o comportamento dos fluídos, cunha descrición detallada das súas diversas formas e dos fundamentos físicos sobre os que están baseadas. Finalmente, realizarase unha introdución aos métodos sen malla, explicando os seus principios fundamentais e presentando métodos sen malla de alta precisión baseados no uso de aproximacións tipo Moving Least Squares (MLS) para resolver as ecuacións de Navier Stokes debilmente compresibles en forma ALE. Estes métodos desenvólvense para abordar algúns dos grandes retos aos que se enfrontan os métodos Lagranxianos tradicionais, como as condicións de contorno, a precisión ou o manexo da lámina libre., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Comparative Review of FEM Like Techniques Applied to the Linear Analysis of Molecular Structures

  • Fernández San Miguel, Andrés
  • Ramírez, Luis
  • Couceiro, Iván
  • Navarrina, Fermín
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this study, a historical review of the Finite Element Method (FEM) and Molecular Dynamics (MD), widely used at the macro and nanoscale respectively is presented, emphasizing the actual parallelisms between their development and applications. After this historical introduction, where certain similarities between both methods are pointed out, different FEM-like methods are analyzed and compared as for first order analysis of structures at the nanoscale. Firstly, the Structural Mechanics (SM) approach is analyzed, where it is assumed that the use of Euler Bernoulli beam elements is equivalent to working directly from the force field. On the other hand, the Molecular Element Method (MEM), which provides the stiffness matrices directly from the potentials, is analyzed. Several analytical static cases are studied for the validation and comparison of both methods. Finally, it is shown that, other branch of methods such as Elastic Network Models (ENM) can be viewed as a particular sub-case of the MEM, or as truss-type finite elements. As an example, the analysis of SARS-CoV2 spikes vibrations is included, comparing with both experimental results and continuous models., The authors acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia (grant ED431C 2022/06) and the project "Virionbreak" funded by the Instituto de Salud Carlos III. Andrés Fernández-San Miguel also acknowledges the FPI grant PRE2022-102024 and the help provided by Strachan Group during his stay at Purdue University. Funding for open access charge: Universidade da Coruña/CISUG., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Adaptively Tuned High-Order Methods for iLES

  • Tsoutsanis, Panagiotis
  • Fu, Lin
  • Nogueira, Xesús
Paper presented at the 9th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2024), 3-7 June 2024, Lisboa, Portugal., [Abstract]: Implicit Large Eddy Simulation (iLES) is popular for modeling high-Reynolds-number turbulent flows due to its simplicity and efficiency. High-resolution numerical schemes in iLES mimic subgrid-scale models by using numerical dissipation/dispersion errors. Balancing these errors is crucial to avoid unphysical energy build-up or excessive diffusion, especially in compressible flows with discontinuities and smooth features. This work introduces an adaptive dissipation/dispersion adjustment (ADDA) algorithm for the CWENOZ scheme in a finite- volume framework for unstructured meshes, tested in subsonic, transonic, and supersonic regimes. The ADDA algorithm enhances robustness and scale-resolving capabilities, yielding efficient and physically meaningful results, and is available in the open-source UCNS3D CFD solver., P.T. acknowledges the computing time on ARCHER2 through UK Turbulence Consortium by the EPSRC grant [EP/X035484/1] and the support by the EPSRC grant [EP/W037092/1]. L.F. acknowledges the fund from the Research Grants Council (RGC) of the Government of Hong Kong Special Administrative Region (HKSAR) with RGC/ECS Project (No. 26200222), RGC/GRF Project (No. 16201023) and RGC/STG Project (No. STG2/E-605/23-N), the fund from Guangdong Basic and Applied Basic Research Foundation (No. 2024A1515011798), and the fund from Guangdong Province Science and Technology Plan Project (No. 2023A0505030005). X.N. acknowledges the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and the funding provided by the Xunta de Galicia [Grant #ED431C 2022/06]., Xunta de Galicia; ED431C 2022/06, United Kingdom. Engineering and Physical Sciences Research Council; EP/X035484/1, United Kingdom. Engineering and Physical Sciences Research Council; EP/W037092/1, China-Hong Kong Special Administrative Region. Research Grants Council; 26200222, China-Hong Kong Special Administrative Region. Research Grants Council; 16201023, China-Hong Kong Special Administrative Region. Research Grants Council; STG2/E-605/23-N, China. Guangdong Basic and Applied Basic Research Foundation; 2024A1515011798, China. Guangdong Province Science and Technology Plan; 2023A0505030005
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Structural Optimization and Comparison Study of Different Configurations of Offshore Wind Turbine Jacket Substructures

  • Fernández Rodríguez, Noelia
  • Couceiro, Iván
  • Nogueira, Xesús
  • Colominas, Ignasi
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this work, the design of a three-legged jacket is presented, taking into account the susceptibility to the directionality of the loads in comparison with a four-legged jacket. For this purpose, two jackets with different orientations with respect to the incoming environmental loads were modelled: the G30, which has two legs facing the main incoming environmental actions, and the G90 jacket, which only has one. In addition, mathematical optimization is proposed to minimize the weight of the structure using a combination of size and shape optimization techniques. The solution to the proposed optimization problem is based on the application of sequential linear programming, which is then solved using the simplex method. In this study, a first-order sensitivity analysis was reformulated to extend its applicability to a three-legged configuration. This sensitivity analysis provides the derivatives of the coordinates of the structure nodes with respect to the design variables required for the shape optimization. The proposed formulation allows optimized designs with a weight reduction of around 40% relative to the UpWind jacket. In the G30 jacket, there was an increase in fatigue damage from the cyclic loads. The G90 jacket and optimal four-legged jacket present design limitations conditioned by the effects of compression stresses and buckling. The differences between the G30 and G90 models highlight the sensitivity of the structural response to the directionality of the loads, which can constitute a limiting factor in the cost reduction of three-legged jackets. An interesting result of this research is that the added shape design variables for the jacket footprint allowed a significant improvement of the optimized designs., The authors gratefully acknowledge the support provided by the Grant PID2021-125447OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and the funds by Grant TED2021-129805B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR.” They also acknowledge the funding provided by the Xunta de Galicia (Grant # ED431C 2022/06). Funding for open access charge: Universidade da Coruña/CISUG.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Multipatch IGA for stress-constrained minimum weight structural topology optimization

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
This is an Accepted Manuscript of an article published by Taylor & Francis in Engineering Optimization published online: 24 Jan 2025 , available at: https://doi.org/10.1080/0305215X.2024.2436994., [Abstract]: In this article, an isogeometric analysis (IGA) formulation with various patches (multipatch approach) is proposed to solve the structural topology optimization (STO) problem. The multipatch formulation enables the solution of STO problems with geometries not equivalent to rectangles by using IGA. For this purpose, a minimum weight with stress constraints (MWSC) problem is stated. A quadratic B-splines basis defined for each patch is used to model the material distribution. The structural analysis is computed with IGA. The introduction of all of the stress constraints in the formulation of the problem is made with an overweight constraint (OC). Finally, the multipatch approach is validated with the solution of some benchmark problems., This work was partially supported by the Xunta de Galicia (Secretaría Xeral de Universidades) and the European Union (European Social Fund) through ‘Grants for Supporting the Predoctoral Stage in Universities of the Galician University System, in Research Public Organisms of Galicia and in Other Entities of the R&D system of the Galician Government–2016’ (ED481A-2016/387); by the Spanish Government (Ministerio de Universidades) through ‘Margarita Salas Grants for the Training of New PhD–2022’ ([)RSU.UDC.MS25); by the Spanish Government (Ministerio de Ciencia e Innovación) through ‘Knowledge Generation Projects’ (PID2021-125447OB-I00) and through ‘Strategic Projects Oriented to the Ecological and Digital Transition’ of the Plan de recuperación, transformación y resiliencia (TED2021-129991B-C31 and TED2021-129805B-100) with FEDER and EU Next Generation funds by the Xunta de Galicia (Consellería de Cultura, Educación, Formación Profesional y Universidades) through ‘Grants for the Consolidation and Structuring of Competitive Research Units of the Galician University System: Competitive Reference Group’ (ED431C 2022/06); and by research fellowships of the University of A Coruña and the Fundación de la Ingeniería Civil de Galicia.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Optimization of Financial Indicators in Shale-Gas Wells Combining Numerical Decline Curve Analysis and Economic Data Analysis

  • Soage Quintáns, Manuel Andrés
  • Juanes, Rubén
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
Este artigo pertence ao número especial: Integrated Approaches for Unconventional Oil and Gas Extraction and Exploration, [Abstract:] We present a methodology to determine optimal financial parameters in shale-gas production, combining numerical simulation of decline curves and stochastic modeling of the gas price. The mathematical model of gas production considers free gas in the pore and the gas adsorbed in kerogen. The dependence of gas production on petrophysical parameters and stimulated permeability is quantified by solving the model equations in a 3D geometry representing a typical fractured shale well. We use Monte Carlo simulation to characterize the statistical properties of various common financial indicators of the investment in shale-gas. The analysis combines many realizations of the physical model, which explores the variability of porosity, induced permeability, and fracture geometry, with thousands of realizations of gas price trajectories. The evolution of gas prices is modeled using the bootstrapping statistical resampling technique to obtain a probability density function of the initial price, the drift, and the volatility of a geometric Brownian motion for the time evolution of gas price. We analyze the Net Present Value (NPV), Internal Rate of Return (IRR), and Discounted Payback Period (DPP) indicators. By computing the probability density function of each indicator, we characterize the statistical percentile of each value of the indicator. Alternatively, we can infer the value of the indicator for a given statistical percentile. By mapping these parametric combinations for different indicators, we can determine the parameters that maximize or minimize each of them. We show that, to achieve a profitable investment in shale-gas with high certainty, it is necessary to place the wells in extremely good locations in terms of geological parameters (porosity) and to have exceptional fracturing technology (geometry) and fracture permeability. These high demands in terms of petrophysical properties and hydrofracture engineering may explain the industry observation of “sweet spots”, that is, specific areas within shale-gas plays that tend to yield more profitable wells and where many operators concentrate their production. We shed light on the rational origin of this phenomenon: while shale formations are abundant, areas prone to having a multi-parameter combination that renders the well profitable are less common., This research has been partially funded by the Ministry of Universities of the Spanish Government (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, “Margarita Salas” Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20), by strategic projects oriented towards the ecological transition and the digital transition of the Ministry of Science and Innovation: GREEN-HUGS (grant #TED2021-129991B-C31 and grant #TED2021-129991B-C32) and NEPTUNE (grant #TED2021-129805B-I00), by the Department of Education and University Planning of the Xunta de Galicia (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering of the Universidade da Coruña., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Tesis doctoral (DoctoralThesis)

The Molecular Element Method (MEM): A FEM-based Formulation for Linear and Non-Linear Molecular Elasticity

  • Fernández-San Miguel, Andrés
[Abstract] Since its beginnings, humanity has always been characterized by building. From shelters to protect us from wind and rain, to pyramids erected to honor the pharaohs, to stone cathedrals and today’s slender cable-stayed bridges, we need knowledge about materials to make these structures possible. Until the end of the 20th century, the design and analysis of complex structures was particularly limited, but the advent of the Finite Element Method (FEM) has made it possible today to analyze them in different elasticity regimes, incorporating nonlinear effects and to design new and larger structures. On another level, the nanoscale has not been left without its advances and, despite the size, has claimed its relevance too. The discovery of materials with extraordinary and promising properties such as graphene and carbon nanotubes, or the devastating effects of the SARS-CoV-2 pandemic, has highlighted the impact that, even the smallest things, might have in our lives. However, unlike what happens at the macroscale with the FEM, only small systems of the order of hundreds of atoms can be analyzed at the nanoescale with techniques such as Density Functional Theory (DFT). This thesis proposes a new formulation coined the Molecular Element Method (MEM) that enables elastic analysis of molecular structures, from small molecules to proteins with thousands of atoms. The method relies on force fields developed in recent years by combining experimental and ab initio techniques, which have been exploited in Molecular Dynamics (MD). However, unlike MD, the proposed formulation is not restricted to dynamic analysis using explicit integration schemes. The proposed method allows to obtain linearized responses in first-order theory rigorously, to perform instability analyses such as buckling, and include nonlinear effects, exploiting typical FEM algorithms superior in order of convergence. The formulation permits working directly on geometries and potential energy at the atomic level, making it particularly versatile and competitive against laborious processes such as the generation of approximated continous models for specific problems. To perform first-order theory analysis, it has been proven that stiffness matrices only require the calculation of geometrical descriptor gradients. So, in an innovative way, the different gradients have been calculated exactly, treating possible singularities as in the case of aligned molecules or graphene sheets. The application of the formulation in this regime has made it possible to analyze different geometries and degrees of localized phenomena: from the precise determination of molecular vibration frequencies to the prediction of the mechanical properties of graphene and carbon nanotubes. The accurate determination of stiffness matrices has facilitated, unlike Molecular Dynamics where a correct selection of temporal discretization is essential to ensure simulation stability, the use of the Newmark method in its unconditionally stable version. As an example, the dispersion of mechanical waves in a nanotube was successfully analyzed with results equivalent to Molecular Dynamics. This work also analyzed the vibrations of protein systems, such as the spikes of SARS-CoV-2. The precise assembly of the stiffness matrices makes it feasible to determine the vibration frequency required to disable the proteins by resonance, and suggests the possibility of building an ultrasonic device for this purpose. Additionally, based on the results established in first-order theory, an extension to the nonlinear regime has been carried out. Consistently, the tangent stiffness matrices are determined exactly, which creates the possibility of using Newton algorithms or the arc length method. These algorithms are used to simulate elastic instabilities with experimental evidence such as single-walled and multi-walled nanotubes kink formation and the indentation of fullerenes. In turn, given that the extension makes it feasible to determine exactly the geometric stiffness matrices of nanostructures such as nanotubes, their critical loads have been calculated under different boundary conditions. This has enabled the calibration of a consistent continuous model using only geometry and force field parameterization as data, yielding mechanical properties that are in agreement with experimental results. Thefore, the Molecular Element Method allows to obtain, directly from the force fields the structural response, either static, dynamic or even non-linear of any molecular structure. In this sense, the method developed is a bridge between energy and structural response., This work has been partially supported by Grant #ED431C 2022/06 of the Consellería de Educación, Universidade e Formación Profesional of the Xunta de Galicia. This work also acknowledges the support provided by Grant PID2021-125447OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and the funds by Grant TED2021-129805B-I00 funded by MCIN/AEI/10.13039/50110 0011033 and by the “European Union NextGenerationEU/PRTR”, and by Grant PID2024-160181OB-I00 of MCIN/AEI. We would also like to thank the funding provided by the “Programa de axudas para realizar estadías dirixido ao persoal investigador adscrito ao CITEEC” by the Centro de Innovación Tecnolóxica en Edificación e Enxeñaría Civil and by Grants PID2023-146793OB-I00 and PID2024-160181OB-I00 of MCIN/AEI., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Arbitrary-Order Unstructured Finite-Volume Methods for Implicit Large Eddy Simulation of Turbulent Flows with Adaptive Dissipation/Dispersion Adjustment (ADDA)

  • Tsoutsanis, Panagiotis
  • Nogueira, Xesús
Data relating to the results in this manuscript are available at the Cranfield Online Research Data Repository https://doi.org/10.57996/cran.ceres-2638., [Abstract]: Implicit Large Eddy simulation (iLES) has gained substantial popularity for modelling high-Reynolds-number turbulent flows, found across several engineering and scientific fields. iLES on a first read represents a simple, computationally efficient, and straightforward way to model turbulent flows. The numerical dissipation/dispersion errors of high-resolution high-order numerical schemes employed in this context, can mimic the effects of the unresolved flow scales, and therefore acting like a subgrid-scale model, most often successfully. The numerical dissipation and dispersion of high-resolution methods are intertwined and controlling them to obtain physically meaningful results in under-resolved grid settings of compressible flows is challenging due to the presence of discontinuities and smooth flow features simultaneously. A numerical method should have the right amount of dissipation/dispersion, such that it can avoid the unphysical “build-up” of energy in the high modes or excessive diffusion, since this will render the method unsuitable for iLES. Several elegant approaches to master this delicate balance have been presented in the literature, including polynomial de-aliasing, Riemann solver dissipation adjustment, and adaptive blending of central and upwind schemes. This work presents an adaptive dissipation/dispersion adjustment (ADDA) algorithm that determines a well resolved and under-resolved region and adjusts the numerical dissipation/dispersion of a high-order CWENOZ scheme, followed by further adjusting the flux-dissipation term depending on the presence of discontinuities. Implemented within an arbitrary-order finite-volume framework for unstructured meshes in compressible flows, the ADDA algorithm is put to the test across a range of under-resolved iLES simulations encompassing subsonic, transonic, and supersonic regimes. The developed framework exhibits enhanced robustness and scale-resolving capabilities, all while achieving physically meaningful results in a computationally efficient manner. All the methods have been implemented and have been made available to the research community in the open-source UCNS3D CFD solver to accelerate the improvement of the methods., P.T. acknowledges the computing time on ARCHER2 through EPSRC UK Turbulence Consortium [EP/X035484/1] and the support provided by the EPSRC grant for “Adaptively Tuned High-Order Unstructured Finite-Volume Methods for Turbulent Flows” [EP/W037092/1]. X.N. acknowledges the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/ 501100011033 and by “ERDF A way of making Europe”, the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, and the funding provided by the Xunta de Galicia [Grant #ED431C 2022/06]., Xunta de Galicia; ED431C 2022/06, United Kingdom. Engineering and Physical Sciences Research Council; EP/W037092/1, United Kingdom. Engineering and Physical Sciences Research Council; EP/X035484/1, https://doi.org/10.57996/cran.ceres-2638
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

High thermal Rayleigh number with double-diffusive finger convection: Effect of nonlinear equation of state

  • Ouzani, Riadh
  • Khelladi, Sofiane
  • Nogueira, Xesús
©2024. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/(opens in new tab/window)  https://www.elsevier.com/about/policies-and-standards/sharing . This is an accepted version of the following published document: https://doi.org/10.1016/j.icheatmasstransfer.2024.107861, [Abstract] In this study, we numerically investigate the effects of the nonlinearity in the equation of state on the structure of fingers and the transport mechanisms of salt and heat in double-diffusive finger convection, utilizing the finite volume approach with high-accuracy schemes to solve the two-dimensional Navier–Stokes equations. Our system is characterized by a low buoyancy ratio and a high thermal Rayleigh number, with density variation modeled as quadratic in temperature and linear in salinity. Three cases of nonlinear parameters were examined: the linear case ( ε = 0), weak nonlinear case ( ε = 1), and highly nonlinear case ( ε = 3). It is shown that increasing the nonlinear parameter enhances the buoyancy force acting on descending fingers more than on ascending ones, resulting in narrower and faster-growing descending fingers. Conversely, ascending fingers are appreciably damped, growing more slowly but with greater width. This asymmetry in finger development gives rise to distinct convective patterns between the upper and lower layers, significantly influencing the formation of mixed layers. The mixing process was also examined by analyzing the probability density function of salinity PDF(S*). Our findings reveal that as the nonlinear parameter increases, the amount of salt transported by descending fingers from the upper to the lower layer decreases. This reduction in salt transport indicates a corresponding decline in mixing efficiency with higher values of the nonlinear parameter., Xesús Nogueira acknowledges the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", and the funds by [Grant TED2021-129805B-I00] funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". They also acknowledge the funding provided by the Xunta de Galicia (grant \#ED431C 2022/06)., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

MLS-SPH-ALE: A Review of Meshless-FV Methods and a Unifying Formulation for Particle Discretizations

  • Eirís, Antonio
  • Ramírez, Luis
  • Couceiro, Iván
  • Fernández-Fidalgo, Javier
  • París, José
  • Nogueira, Xesús
Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., [Abstract:] Mesh-based and particle methods were conceived as two different discretization strategies to solve partial differential equations. In the last two decades computational methods have diversified and a myriad of hybrid formulations that combine elements of these two approaches have been developed to solve Computational fluid dynamics problems. In this work we present a review about the meshless-FV family of methods, an analysis is carried out showing that the MLS-SPH-ALE method can be considered as a general formulation from which a set of particle-based methods can be recovered. Moreover, we show the relations between the MLS-SPH-ALE method and the finite volume method. The MLS-SPH-ALE method is a versatile particle-based method that was developed to circumvent the consistency issues of particle methods caused by the use of the kernel approximation. The MLS-SPH-ALE method is developed from the differential equation in ALE form using the partition unity property which is automatically fulfilled by the Moving Least Squares approximation., The authors gratefully acknowledge the support provided by the [Grant PID2021-125447OB-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, and the funds by [Grant TED2021–129805B-I00] funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. They also acknowledge the funding provided by the Xunta de Galicia (Grant #ED431C 2022/06). J. Fernández-Fidalgo acknowledges the support provided by “Ayudas para la recualificación del sistema universitario español para 2021–2023. Modalidad Margarita Salas RSU.UDC.MS20" by the Ministerio de Universidades of the Spanish Government and European Union through the NextGenerationEU funds., Xunta de Galicia; ED431C 2022/06