RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/232530
Datos de investigación
Set de datos (Dataset)
Electrochemical removal of polystyrene nanoplastics in a filter-press reactor using modified Ti-felt anodes [Dataset]
Ti-felt anodes, with high surface area, have been used as supports of Pt and SnO2-Sb-Pt electrocatalysts. Anodes have been applied in a filter-press electrochemical reactor for the
electrooxidation of polystyrene nanoplastics (NPs) (100 mg·L-1). Two types of configurations have been used. In the first, the solution with NPs flows through the anode,
taking advantage of its porosity (acting as a sort of membrane) to enhance the contact of NPs with the anode and the oxidative species generated. In the second configuration, the
solution of NPs flows parallel to the anode, and the NPs flow parallel to it. Comparing both configurations at 25 mA·cm-2, for the Ti-Pt anode, the flow-through configuration
decreases energy consumption by ~7-fold and treatment time by ~15-fold when compared to the flow-by configuration. For Ti-SnO2-Sb-Pt anode, ratios of ~6.5-fold and
~13-fold were obtained, respectively. Moreover, the effect of the current density (50, 25, 12.5, and 5 mA·cm-2) was studied. For the Ti-Pt electrode, a treatment time of only 40
minutes was achieved at a current density of 25 mA·cm-2 with the F-T configuration, with a faradaic efficiency of 62.09 %, and electrochemical energy per order (EEO) of 21.91
kW·h·m-3·order-1. In the case of the F-B configuration at 25 mA·cm-2 the treatment time increases until 600 min, with a faradaic efficiency of 8.27 % and EEO of 156.57 kW·h·m-
3·order-1., This research is part of the Spanish R+D+i contract TED2021-130905B-I00 funded by MCIN/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Red E3Tech Plus: Proyecto Redes de
Investigación de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE-Universitat Politècnica de València. The Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for its help with FESEM, EDX, TEM, and XRM characterization.
Proyecto:
Agencia Estatal de Investigación / Proyectos Estratégicos Orientados a la Transición Ecológica y a la Transición Digital TED2021-130905B-I00
,
Agencia Estatal de Investigación / Redes de investigación RED2022-134552-T
DOI: https://riunet.upv.es/handle/10251/232530
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/232530
HANDLE: https://riunet.upv.es/handle/10251/232530
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/232530
PMID: https://riunet.upv.es/handle/10251/232530
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/232530
Ver en: https://riunet.upv.es/handle/10251/232530
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/232530