Pasar al contenido principal

Resultados de investigación

Rights
Projectcode
Resultados totales (Incluyendo duplicados): 54623
Encontrada(s) 5463 página(s)
Recercat. Dipósit de la Recerca de Catalunya
oai:recercat.cat:2117/342638
Datos de investigación Set de datos (Dataset)

DURCWAVE - CIEM

  • Altomare, Corrado
  • Gironella Cobos, Xavier
  • Sospedra Iglesias, Joaquim
The data refer to an experimental campaign carried out to characterize the forces involved in the failure of the Pont del Petroli (Badalona, Catalonia) due to the storm Gloria happened in the night of the 20 January 2020. The experiments were carried out in the CIEM (Canal d’Investigació i Experimentació Marítima) wave flume in the Laboratory of Maritime Engineering of the UPC (Universitat Politecnica de Catalunya - BarcelonaTech, Barcelona, Catalonia)., Data include measurements of water surface elevation along the wave flume and wave loading (forces + pressures) on elements of the pier. Both raw and post-processed data are provided., 1
Recercat. Dipósit de la Recerca de Catalunya
oai:recercat.cat:2117/131938
Datos de investigación Set de datos (Dataset)

Numerical Model for a 19th Century Hydrometric Module: models_cases_1-6

  • Vives i Costa, Jordi
Numerical Model for a 19th Century Hydrometric (Case 1: 1000 L/s inlet flow). Aquests datasets són els models numèrics que corresponen als 6 casos de simulacions fetes amb el software de CFD anomenat Flow3D., 1
Recercat. Dipósit de la Recerca de Catalunya
oai:recercat.cat:2117/189334
Datos de investigación Set de datos (Dataset)

Toward the new generation of surgical meshes with 4D response: soft, dynamic and adaptable [Dataset]

  • Lanzalaco, Sonia
  • Turón Dols, Pau
  • Weis, Christine
  • Mata, Christian
  • Planas Cuchi, Eulàlia
  • Alemán Llansó, Carlos
  • Armelín Diggroc, Elaine Aparecida
These data are associated to the paper with the same title and are structured according to the figures in the paper. These data correspond to the research results of the WP3 of the European Project 4D-POLYSENSE., The present dataset reports the scientific results corresponding to a scientific study where a bidimensional (2D) polypropylene flexible mesh material has been converted into a fourth dimension (4D) dynamic system. The platform is composed by a fibres of isotactic polypropylene (iPP) mesh coated with thermosensitive poly(N-isopropylacrylamide-co-N,N'-methylene bis(acrylamide) (PNIPAAm-co-MBA) hydrogel, and undergoes variations in its geometry by reversible folding/unfolding behaviour. Folding and unfolding motion in aqueous solution of bilayer and monolayer systems composed by two or one layer of hydrogel, respectively, are reported in the present dataset. Furthermore, an infrared thermographic camera and an optical microscope were used to evaluate the macroscopic and microscopic structure stimulus response in air. Additionally, PP-g-PNIPAAm meshes showed an increase in the mechanical properties (bursting strength) with respect to the uncoated mesh., 1
Recercat. Dipósit de la Recerca de Catalunya
oai:recercat.cat:2117/367811
Datos de investigación Set de datos (Dataset)

DIGNITY digital exclusion dataset - Germany

  • Goodman-Deane, Joy
  • Kluge, Jakob
  • Waller, Sam
  • Roca Bosch, Elisabet
This dataset contains data from a population-representative survey examining various factors relating to digital exclusion (particularly digital mobility exclusion). The survey was conducted with 1010 adult participants in Germany in 2020. This dataset is part of a series of 5 datasets which used the same questionnaire (translated into different languages) in different countries in Europe., 1
Recercat. Dipósit de la Recerca de Catalunya
oai:recercat.cat:2117/353437
Datos de investigación Set de datos (Dataset)

Velocity profile distribution in steep channels with low relative submergence conditions

  • Marin-Esteve, Blanca
  • Bateman Pinzón, Allen
  • Sosa Pérez, Raul
The data have been acquired during the experimental campaign carried out in the Steep Slope Flume at Morphodynamics Laboratory I of the GITS group in BarcelonaTech-Universtitat Politècnica de Catalunya. Data published here comprise the measurements carried out in the laboratory related with velocity profiles in steep channels with low relative submergence. Flume slope ranged between 2-10% and same bed material had been used (a basaltic gravel of 1.45 mm of main diameter) for all the experiments. 30 experiments were carried out with 165 velocity profile measurements., 2
Recercat. Dipósit de la Recerca de Catalunya
oai:recercat.cat:2117/372547
Datos de investigación Set de datos (Dataset)

Stiffness of randomly sampled stainless steel frames under gravity and gravity plus wind load scenarios

  • Arrayago Luquin, Itsaso
  • Rasmussen, Kim J.R.
This file includes data on system vertical and lateral stiffness of stainless steel frames under gravity and gravity plus wind load scenarios obtained from the finite element simulations carried out on six stainless steel frames., 1
Recercat. Dipósit de la Recerca de Catalunya
oai:recercat.cat:2117/168957
Datos de investigación Set de datos (Dataset)

Breakage function determination for HPGR

  • Anticoi Sudzuki, Hernán Francisco
De data base shows the results of a new methodology to determine the breakage distribution function parameters to be used in High pressure grinding rolls modelling. The piston die test tries to simulate a high pressure enviroment, thus the resulted particle size distribution can be normalized to describe a breakage mechanism. Furthermore, one example of how to obtain the breakage function parameters is presented., The modelling of high pressure grinding rolls is described by the population balance model, a mass balance which includes several functions that are related to the mineral characteristics, material kinetics and operative conditions of the device. The breakage distribution function is one of these functions and refers to the way in which the daughter particles are generated by the process of comminution. The piston-die press is presented as a methodology to determine the breakage distribution function of two different materials, from the mechanical response point of view: altered granite and a cal-silicate material. The aim is to determine the relation between the operative conditions and the mineral characteristics in order to explain and predict the breakage function parameters. The materials were characterised using XRD and single compression strength tests. The altered granite is a brittle material, which generates more fines under single compression conditions compared to bed compression conditions, mainly due to the mineral composition and the response of the material to the breakage action. The cal-silicate material shows a normal trend in its breakage behaviour. As is expected, the mineralogical characterisation is a useful tool to predict the values of the parameters of the breakage distribution function., 1
Recercat. Dipósit de la Recerca de Catalunya
oai:recercat.cat:2117/168964
Datos de investigación Set de datos (Dataset)

High pressure roll crusher modelling

  • Anticoi Sudzuki, Hernán Francisco
Using a previous mechanical characterization of two types of material, several lab-test work have been done. The data shows the particle size distribution of these tests, all the inputs and the model simulation presented in the related paper to this data base. The new mathematical approach use the operative conditions and the feed particle size distribution to obtain a product, which is compared with the lab-test results, An improved approach is presented to model the product particle size distribution resulting from grinding in high-pressure roll crusher with the aim to be used in standard high-pressure grinding rolls (HPGR). This approach uses different breakage distribution function parameter values for a single particle compression condition and a bed compression condition. Two materials were used for the experiments; altered Ta-bearing granite and a calc-silicate tungsten ore. A set of experiments was performed with constant operative conditions, while varying a selected condition to study the influence of the equipment set-up on the model. The material was comminuted using a previously determined specific pressing force, varying the feed particle size, roll speed and the static gap. A fourth group of experiments were performed varying the specific pressing force. Experimental results show the high performance of the comminution in a high-pressure environment. The static gap was the key in order to control the product particle size. A mathematical approach to predict the product particle size distribution is presented and it showed a good fit when compared to experimental data. This is the case when a narrow particle size fraction feed is used, but the fit became remarkably good with a multi-size feed distribution. However, when varying the specific pressing force in the case of the calc-silicate material, the results were not completely accurate. The hypothesis of simultaneous single particle compression and bed compression for different size ranges and with different parameters of the distribution function was probed and reinforced by various simulations that exchanged bed compression parameters over the single particle compression distribution function, and vice versa., 1
Recercat. Dipósit de la Recerca de Catalunya
oai:recercat.cat:2117/364349
Datos de investigación Set de datos (Dataset)

Selectively targeting tumorigenicity in osteosarcoma

  • Tornin Cavielles, Juan
  • Mateu Sanz, Miguel
  • Rey, Verónica
  • Murillo, Dzohara
  • Huergo, Carmen
  • Rodríguez, Aida
  • Rodríguez, René
  • Canal Barnils, Cristina
Data associated with the study called "Selectively targeting tumorigenicity in osteosarcoma". Each file corresponds to the raw data of one of the figures of the paper, 1
Recercat. Dipósit de la Recerca de Catalunya
oai:recercat.cat:2117/370641
Datos de investigación Set de datos (Dataset)

DIGNITY digital exclusion dataset - Barcelona

  • Goodman-Deane, Joy
  • Waller, Sam
  • Roca Bosch, Elisabet
  • Lazzarini, Boris
  • Wybraniec, Bartosz Maciej
  • Villares Junyent, Míriam
This dataset contains data from a population-representative survey examining various factors relating to digital exclusion (particularly digital mobility exclusion). The survey was conducted with 601 adult participants in the Barcelona Metropolitan Area of Spain in 2020. This dataset is part of a series of 5 datasets which used the same questionnaire (translated into different languages) in different countries in Europe., 1
Buscador avanzado