Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Silicon nitride programmable photonic processor with folded heaters

  • Pérez-López, Daniel
  • Gutiérrez, Ana
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] General-purpose programmable photonic processors rely on the large-scale integration of beamsplitters and reconfigurable phase shifters, distributed within unit cells or photonic gates. With their future evolution threatened by several hardware constrains, including the integration density that can be achieved with current mesh topologies, in this work, we present a unit cell topology design to increase the integration density of waveguide mesh arrangements based on folded Mach-Zehnder Interferometers. We report the design details of a 40-unit cell waveguide mesh integrated in a 11 mm x 5.5 mm silicon nitride chip achieving, to the best of our knowledge, the highest integration density reported to date for a general-purpose photonic processor. The chip is electrically interfaced to a PCB and we report examples of reconfigurable optical beamsplitters, basic tunable microwave photonic filters with high peak rejection (40 dB approx.), as well as the dynamic interconnection and routing of 5G digitally modulated signals within the photonic mesh. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, European Cooperation in Science and Technology (CA 16220 EUIMWP); Generalitat Valenciana (PROMETEO 2017/017); Ministerio de Economia, Industria y Competitividad, Gobierno de Espana (Juan de la Cierva); European Research Council (ERC ADG-2016 UMWP-Chip, ERC-POC-2019 FPPAs).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Wideband QAM-over-SMF/turbulent FSO downlinks in a PON architecture for ubiquitous connectivity

  • Nguyen, Dong-Nhat
  • Vallejo-Castro, Luis
  • Bohata, Jan
  • Ghassemlooy, Zabih
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We propose and investigate for the first time a seamless millimeter-wave (mmW) radio-over-fiber (RoF) and radio-over-free-space optics (FSO)-based downlink for use in a passive optical network architecture using 4-, 16- and 64-quadrature amplitude modulation (QAM) for broadband wireless access (BWA) networks. The proposed system is implemented in both experiment and simulation to realize continuous and ubiquitous coverage in urban and rural areas. We outline, a proof-of-concept demonstration of 4-, 16- and 64-QAMs at data rates of 34, 67 and 100 Mb/s, respectively transmitted over a 15 km standard single-mode fiber (SMF), which is then optically up-converted to 25 GHz for transmission over a 10 km of SMF and a 2 m of FSO channel under a non-uniform turbulent condition. We show the measured error vector magnitude (EVM) values of 13, 9.2 and 7.3% for 4-, 16- and 64-QAM, respectively, which are below the corresponding standard EVM requirements and therefore confirm the practicality of the proposed hybrid system. Depending on the data rates, each modulation can be adaptively configured. We report a simulation of a 10 Gb/s 4- and 64-QAM hybrid RoF-FSO downlink under an extended non-uniform turbulence regime to verify the feasibility of the proposed scheme for use in practical applications. By implementing the decision-directed carrier phase recovery and linear electrical equalization, EVMs can be efficiently reduced below the required limits. We further evaluate the proposed system performance in terms of the bit error rates, constellation diagrams, received optical and mmW powers. Using state-of-the-art K-band power amplifiers and conical horn antennas, the maximum wireless transmission distance is estimated to be about 135 m for use in the last-mile BWA networks., This work was supported in part by the Ministry of Education, Youth and Sports of Czech Republic (CZ.02.2.69/0.0/0.0/16_027/0008465), and in part by European Cooperation in Science and Technology COST CA16220 and CTU project SGS20/166/OHK3/3T/13.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the 40 GHz Remote Versus Local Photonic Generation for DML-Based C-RAN Optical Fronthaul

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Mora Almerich, José|||0000-0002-2877-4118
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] Local and remote photonic millimeter wave (mmW) signal generation schemes are theoretically and experimentally evaluated in order to compare both approaches for practical deployment in a cloud radio access network (C-RAN) fronthaul network. The paper presents a full comprehensive formulation of the frequency response of a system based on a directly modulated laser transmitting data over 40 GHz signal which is generated by external carrier suppressed modulation and optical frequency multiplication. Theoretical and experimental characterization of the system response at baseband and mmW band for local and remote generation setups show very good agreement. The remote configuration leads to a higher electrical output power (i.e., 15 dB higher in 25 km fiber links) than the local generation setup in the mmW band due to the combined effect of chirp and fiber dispersion, although intermodulation distortion is higher in the former case. Transmission experiments using quadrature phase-shift keying (QPSK) signals with 250 MHz bandwidth centered at 0.5 GHz over 10 and 25 km fiber links also confirm the superior performance of the remote setup, whereas the local setup leads to similar results to optical back-to-back (OB2B) measurements, which is also validated with data signals centered at different frequencies within the laser bandwidth frequency range. Finally, experimental results show the quality of the recovered signals in terms of error vector magnitude (EVM) as a function of the received electrical power and demonstrate that no further penalties are introduced by photonic mmW signal generation with respect to electrical back-to-back (EB2B) levels., This work was supported in part by Generalitat Valenciana through PROMETEO2017/103, in part by Ministerio de Ciencia, Innovacion y Universidades through FOCAL RTI2018-101658-B-I00, in part by MEYES under Grant LTC18008, in part by the Ministry of Industry and Trade in Czech Republic under Grant FV40089, and in part by European Cooperation in Science and Technology under Grants CA16220 and CA19111.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Scalable analysis for arbitrary photonic integrated waveguide meshes

  • Pérez-López, Daniel
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] The advances in fabrication processes in different material platforms employed in integrated optics are opening the path towards the implementation of circuits with increasing degrees of complexity. In addition to the more conventional application specific photonic circuit paradigm, the programmable multifunctional photonics (PMP) approach is a transversal concept inspired by similar approaches, which are already employed in other technology fields. For instance, in electronics, field programmable gate array devices enable a much more flexible universal operation as compared to application specific integrated circuits. In photonics, the PMP concept is enabled by two-dimensional (2D) waveguide meshes for which the number of possible input/outputs ports quickly builds up, and, furthermore, internal signal flow paths make the computation of transfer functions an intractable problem. Here we report a scalable method based on mathematical induction that allows one to obtain the scattering matrix of any 2D integrated photonic waveguide mesh circuit composed of an arbitrary number of cells and that is easily programmable. To our knowledge this is the first report of the kind, and our results open the path to unblocking this important design bottleneck. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, H2020 European Research Council (ERC) (ADG741415 UMWPCHIP); Generalitat Valenciana (PROMETEO 2017/103); European Cooperation in Science and Technology (COST) (CA16220 EUIMWP)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multipurpose self-configuration of programmable photonic circuits

  • Pérez-López, Daniel
  • López-Hernández, Aitor
  • Dasmahapatra, Prometheus
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] Programmable integrated photonic circuits have been called upon to lead a new revolution in information systems by teaming up with high speed digital electronics and in this way, adding unique complementary features supported by their ability to provide bandwidthunconstrained analog signal processing. Relying on a common hardware implemented by two-dimensional integrated photonic waveguide meshes, they can provide multiple functionalities by suitable programming of their control signals. Scalability, which is essential for increasing functional complexity and integration density, is currently limited by the need to precisely control and configure several hundreds of variables and simultaneously manage multiple configuration actions. Here we propose and experimentally demonstrate two different approaches towards management automation in programmable integrated photonic circuits. These enable the simultaneous handling of circuit self-characterization, auto-routing, self-configuration and optimization. By combining computational optimization and photonics, this work takes an important step towards the realization of high-density and complex integrated programmable photonics., D.P.L. acknowledges funding through the Spanish MINECO Juan de la Cierva program. J.C. acknowledges funding from the ERC Advanced Grant ERC-ADG-2016-741415 UMWP-Chip and ERC-2019-POC-859927. Authors also acknowledge funding from Future MWP technologies and applications PROMETEO/2017/103, Advanced Instrumentation for World Class Microwave Photonics Research IDIFEDER/2018/031, EUIMWP CA16220, Infraestructura para caracterizacion de Chips Fotonicos EQC2018-004683-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integrated photonic tunable basic units using dual-drive directional couplers

  • Pérez-López, Daniel
  • Gutierrez Campo, Ana Maria
  • Sánchez-Gomáriz, Erica
  • Dasmahapatra, Prometheus
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] Photonic integrated circuits based on waveguide meshes and multibeam interferometers call for large-scale integration of Tunable Basic Units (TBUs) that feature beam splitters and waveguides. This units are loaded with phase actuators to provide complex linear processing functionalities based on optical interference and can be reconfigured dynamically. Here, we propose and experimentally demonstrate, to the best of our knowledge, for the first time, a thermally actuated Dual-Drive Directional Coupler (DD-DC) design integrated on a silicon nitride platform. It operates both as a standalone optical component providing arbitrary optical beam splitting and common phase as well as a low loss and potentially low footprint TBU. Finally, we report the experimental demonstration of the first integrated triangular waveguide mesh arrangement using DD-DC based TBUs and provide an extended analysis of its performance and scalability. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, European Research Council (ERC ADG-2016UMWP-Chip, ERC-POC-2019 FPPAs); Generalitat Valenciana (PROMETEO 2017/017); European Cooperation in Science and Technology (COST Action CA16220 EUIMWP.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

M-QAM signal transmission at the photonically generated K-band over thermal-induced turbulent FSO links with different turbulence distributions

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We present a theoretical and experimental study on the impact of different thermal-induced free-space turbulence distributions on the M-quadrature amplitude modulation (M-QAM) signal transmission in radio frequency K-band over hybrid optical links of standard single mode fiber (SSMF) and free-space optics (FSO). Frequency multiplication using an external intensity modulator biased at the null transmission point has been employed to photonically generate radio signals at a frequency of 25 GHz, included for the frequency bands for fifth-generation (5G) mobile networks. Moreover, extensive simulations have been performed for 10 Gb/s with 4-, 16-, and 64-QAM over 5 km of SSMF and 500 m long FSO channels under scenarios with different turbulence levels and distributions. Proof-of-concept experiments have been conducted for 20 MHz with 4- and 64-QAM over 5 km of SSMF and 2 m long FSO channels under turbulence conditions. Both theoretical and experimental systems have been analyzed in terms of error vector magnitude (EVM) performance showing feasible transmission over the hybrid links in the received optical power range. Non-uniform turbulence distributions are shown to have a different impact on M-QAM modulation formats, i.e., turbulence distributions with higher strength in the middle of the FSO link reveal a 1.9 dB penalty when using 64-QAM signals compared to a 1.3 dB penalty using 4-QAM signals, whereas higher penalties have been measured when 4-QAM format is transmitted over turbulence distributions with larger magnitude in the second half of the FSO link. The results have been validated by theoretical predictions and lead to practical consequences on future networks' deployment., Generalitat Valenciana (PROMETEO 2017/103); Ministerio de Ciencia, Innovacion y Universidades (FOCAL RTI2018-101658-B-I00); Ministerstvo Prumyslu a Obchodu (FV30427) and within European Cooperation in Science andTechnology (CA16220).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Programmable True Time Delay Lines Using Integrated Waveguide Meshes

  • Pérez-López, Daniel
  • Sánchez-Gomáriz, Erica
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We analyze and explore the potential that waveguide-mesh-based architectures used in programmable photonic integrated circuits can be configured to enable true time optical delay lines, which can find applications in different microwave photonics functionalities, such as beamforming and optical filtering. We also propose and experimentally demonstrate an alternative standalone tunable basic unit (TBU) architecture where its internal coupling device is implemented by means of a dual-drive tunable directional coupler (DD-TDC) that performs independent amplitude beam splitting and phase shifting. Compared to the previous alternatives based on 3-dB balanced Mach-Zehnder interferometers, the DD-TDC reduces by more than two times the insertion losses of TBUs enabling the potential realization of larger meshes with a three-fold enhanced step-time resolution. Bandwidth and robustness analysis are also considered., This work was supported in part by the European Research Council under Grant ERC-ADG-2016-471715 UMWP-CHIP, in part by the COST Action CA16220 EUWMP, in part by the Spanish MINECO Projects TEC2014-60378-C2-1-R, and in part by the Gen. Valenciana PROMETEO Project 2017/103.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Field-programmable photonic arrays

  • Pérez-López, Daniel
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We propose a new programmable integrated photonic device, the Field Programmable Photonic Array, which follows a similar rationale as that of Field Programmable Gate Arrays and Field Programmable Analog Arrays in electronics. This high-level concept, basic photonic building blocks, design principles, and technology and physical implementation are discussed. Experimental evidence of its feasibility is also provided. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, European Research Council (ERC ADG-2016 UMWP-Chip 741415); Generalitat Valenciana (PROMETEO 2017/017 research excellency award); European Union COST Action (CA16220 EUIMWP); Spanish MINECO (Ramon y Cajal fellowship RYC-2014-16247 for I. Gasulla)., © 2018 Optical Society of America. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibited
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

General-purpose programmable photonic processor for advanced radiofrequency applications

  • Pérez-López, Daniel
  • Gutierrez Campo, Ana Maria
  • Sánchez, David
  • López-Hernández, Aitor
  • Gutiérrez, Mikel
  • Sánchez-Gomáriz, Erica
  • Fernández, Juan
  • Cruz, Alejandro
  • Quirós, Alberto
  • Xie, Zhenyun
  • Benítez-González, Jesús
  • Bekesi, Nandor
  • Santomé, Alejandro
  • Pérez-Galacho, Diego
  • Dasmahapatra, Prometheus
  • Macho-Ortiz, Andrés
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] A general-purpose photonic processor can be built integrating a silicon photonic programmable core in a technology stack comprising an electronic monitoring and controlling layer and a software layer for resource control and programming. This processor can leverage the unique properties of photonics in terms of ultra-high bandwidth, high-speed operation, and low power consumption while operating in a complementary and synergistic way with electronic processors. These features are key in applications such as nextgeneration 5/6 G wireless systems where reconfigurable filtering, frequency conversion, arbitrary waveform generation, and beamforming are currently provided by microwave photonic subsystems that cannot be scaled down. Here we report the first general-purpose programmable processor with the remarkable capability to implement all the required basic functionalities of a microwave photonic system by suitable programming of its resources. The processor is fabricated in silicon photonics and incorporates the full photonic/ electronic and software stack., D.P.L. acknowledges funding through the ERC-StG-2022-LS-Photonics 101076175. J.C. acknowledges funding from the ERC Advanced Grant ERC-ADG-2016-741415 UMWP-Chip and ERC-POC-2019-959927, Generalitat Valenciana funding through Future MWP technologies and applications PROMETEO/2017/103, Advanced Instrumentation for World Class Microwave Photonics Research IDIFEDER/2018/031, EUIMWP CA16220, Infraestructura para caracterización de Chips Fotónicos EQC2018-004683-P. All the authors also acknowledge funding from HORIZON-EIC-2021-TRANSITION OPEN-01101057934 INSPIRE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of Thermal-Induced Turbulent Distribution Along FSO Link on Transmission of Photonically Generated mmW Signals in the Frequency Range 26¿40 GHz

  • Vallejo-Castro, Luis
  • Komanec, Matej
  • Bohata, Jan
  • Nguyen, Dong-Nhat
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
[EN] Microwave photonics is a promising solution to transmit millimeter wave (mmW) signals for the 5th generation (5G) mobile communications as part of a centralized radio access network (C-RAN). In this paper, we experimentally evaluate the impact of turbulent free space optics links on photonically generated mmW signals in the frequency range of 26¿40 GHz . We analyze the remote generation of mmW signals over hybrid links based on free-space optics (FSO) and standard single mode optical fiber (SSMF) with ¿39.97dBm received electrical power and phase noise level at 100kHz as low as ¿95.92dBcHz at 26GHz . Different thermal distributions along the FSO link have been implemented and Gamma-Gamma model has been employed to estimate the thermally induced turbulence. The results show high electrical power decrease and fluctuation of the generated mmW signal according to the particular level of the turbulence in terms of refractive index structure parameter and thermal distribution along the FSO link. 8Gb/s 16-quadrature amplitude modulation (QAM) data transmission at 42GHz has been demonstrated over the hybrid link with minimal error vector magnitude (EVM) value of 5% whereas turbulent FSO link introduced up to 5dB power penalty., This work was supported in part by the Research Excellence Award Programme GVA under Grant PROMETEO 2017/103 and in part by the Spanish Ministerio de Ciencia, Innovacion y Universidades, under RTI2018-101658-B-I00 FOCAL Project and MEYS Project LTC18008 within COST CA16220.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Usability of a 5G fronthaul based on a DML and external modulation for M-QAM transmission over photonically generated 40 GHz

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
[EN] In this paper, we numerically and experimentally present the bandwidth constraints of a cost-effective 5G mobile fronthaul based on a directly-modulated laser for data modulation and a Mach-Zehnder modulator-based optical double sideband with carrier suppression scheme for optical millimeter wave (mmW) signal generation. The effect of chirp, fiber dispersion and a combination of both on different bandwidth M-Quadrature Amplitude Modulation (M-QAM) signals, i.e. M = 4, 16 and 64, at 40 GHz has also been investigated. Simulation results are firrst carried out to evaluate the impact of higher chirp of the directly-modulated laser on the link performance as a function of modulation format and signal bandwidth. We then experimentally demonstrate the same scheme transmitting M-QAM signals with bandwidths ranging from 50 to 1000 MHz over a 10 km long single mode fiber. Both experimental and simulation results show that larger signal bandwidths lead to higher optical power penalties due to the combined effect with the error vector magnitudes (EVMs), however still satisfying the required limits of 3GPP standard for allQAMsignals. Experimental measurements also showthe feasibility of including free space optics links in the optical distribution network with no further signi cant penalties. Finally, a multiband signal (three-band) transmission is demonstrated leading to an increase of the total bitrate with the measured EVMs are well below the EVM requirement., This work was supported in part by the Generalitat Valenciana under Grant PROMETEO 2017/103, in part by the Ministerio de Ciencia, Innovacion y Universidades under Grant FOCAL RTI2018-101658-B-I00, in part by the Ministerstvo Prumyslu a Obchodu under Grant FV40089, and in part by the European Cooperation in Science and Technology under Grant CA16220.