Skip to main content

REDES OPTICAS HIBRIDAS ENERGETICAMENTE EFICIENTES PARA COMUNICACIONES E ILUMINACION EN INTERIORES

RTI2018-101658-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Harmonic and Intermodulation Distortion Analysis in Directly Modulated Lasers Over Local and Remote Photonically Generated Millimeter-Wave Signals

  • Vallejo-Castro, Luis
  • Mora Almerich, José|||0000-0002-2877-4118
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This paper presents a comprehensive analytical derivation and experimental evaluation of the impact of harmonic and intermodulation distortion on data transmission over local and remote photonically generated millimeter wave (mmW) signals over an optical fronthaul based on a directly modulated laser (DML) and carrier-suppressed (CS) external modulation for frequency up-conversion. Frequency response of different harmonic distortion (HD) and intermodulation (IMD) terms are measured for a 40 GHz signal under back-to-back, local and remote scenarios for the sake of comparison. Furthermore, measurements of error vector magnitude (EVM) of single and multiband QPSK signals are presented in good agreement with the frequency measurements for (2 omega(k)), (omega(k) - omega(l)) and (omega(k) + omega(l))-type distortion terms. Wide-band signals with in-band distortion and multiband signals with out-of-band distortion are examples that need to be transmitted over local generation mmW approach in cloud-radio access networks (C-RAN), in spite of the high performance achieved by remote generation approach due to the combined effect of fiber dispersion and laser chirp. Results will serve as valuable guidelines for 6G networks deployment in concrete application scenarios., This work was supported by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe through the regional project Generalitat Valenciana (PROMETEO 2021/015) under Grant RTI2018-101658B-I00 FOCAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Linear Response Modeling of High Luminous Flux Phosphor-Coated White LEDs for VLC

  • Salvador-Llàcer, Pau|||0000-0002-2197-4942
  • Valls Coquillat, Javier|||0000-0002-9390-5022
  • Corral, Juan L.|||0000-0003-0857-5207
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Canet Subiela, Mª José|||0000-0002-6765-9219
[EN] The widespread deployment of LEDs for illumination purposes has open the door to the use of these devices for visible light communications (VLC). Most lighting fixtures are mounted with phosphor-based white LEDs, and a driver connected to the LED is also required for VLC. This paper shows that the parasitic effects introduced by this setup change the frequency response of the intrinsic LED. A linear model to characterize the whole setup is proposed, as well as a methodology to extract its parameters. This methodology allows the designer to characterize the frequency response of LEDs without the additional difficulty of knowing the specific parasitic components introduced by the setup. The proposed model offers an accurate estimation of the slope of the LED frequency response in order to broaden the frequency range in which the model is useful to characterize and simulate VLC links. This was corroborated with the characterization of three commercial white LEDs whose measured and modeled frequency responses matched perfectly.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficiency Analysis of a Truncated Flip-FBMC in Burst Optical Transmission

  • Bahaaelden, Mohammed S.
  • Pérez-Jiménez, Rafael
  • Renfors, Markku
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] A novel Flip-filter bank multicarrier (Flip-FBMC)-based transmultiplexer (TMUX) with offset quadrature amplitude modulation is proposed to enhance the transmission performance compared to a conventional Flip-OFDM system. Moreover, the possibility to reduce the TMUX response (latency) and increase spectral efficiency is investigated for the first time through a tail shortening method. The proposed design is based on a biorthogonal form for visible light communication (VLC) to increase the flexibility of design requirements. However, spectral efficiency suffers from the ramp-up and the ramp-down at the beginning and end, respectively, of a data burst. Hence, as a penalty, Flip-FBMC imposes 9 more symbols than a Flip-OFDM packet and two factors compared to a DCO-FBMC burst. Hard truncation of the lowest energy tail minimizes latency and limits the system penalty to 2.5 symbols, which is lower than that of DCO-FBCM by 2 symbols. The results show that the prototype filter of the Heisenberg factor ( ¿1 ) is highly effective in reducing the energy loss of truncated tails and reduces the symbol error rate (SER). The Flip-FBMC gain over a direct line-of-sight VLC channel is analyzed, and the channel estimation of a truncated burst, which is based on the interference approximation method (IAM) of IAM-C type, exhibits a superior performance of 1.5 dB at 10 ¿3 SER over the IAM-R method and 1 dB at 10 ¿5 SNR over a cyclic prefix of 1 point Flip-OFDM. On the other hand, the analysis reveals that IAM-C is slightly impacted by the truncated burst compared to the nontruncated version., This work was supported in part by the Research Agency under Project RTI2018-101658-B-I00 and Project TEC2017-84065-C3-1-R, in part by the European Cooperation in Science and Technology COST Action "European Network on Future Generation Optical Wireless Communication Technologies (NEWFOCUS)'' under Grant CA19111, and in part by Generalitat Valenciana under Grant PROMETEO 2017/103.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Demonstration of M-QAM OFDM bidirectional 60/25 GHz transmission over 10 km Fiber, 100 m FSO and 2 m radio seamless heterogeneous fronthaul link

  • Vallejo, Luis
  • Nguyen, D.-N.
  • Guerra, C.
  • Bohata, J.
  • Spacil, J.
  • Zvanovec, S.
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Mora Almerich, José|||0000-0002-2877-4118
[EN] In this paper, we demonstrate the experimental transmission of 16-and 64-quadrature amplitude modulation (QAM) Long Term Evolution -Orthogonal Frequency Division Multiplexing (LTE-OFDM) signals by using mil-limetre wave frequencies at 60 GHz and 25 GHz for downlink and uplink, respectively, over a heterogeneous optical fronthaul infrastructure. A directly modulated laser was employed for both links, which enables the cost-effective full-duplex system proposal. The bidirectional link consists of a 10 km of single mode fiber, a 100 m long free space optics channel and 2 m long wireless radio link, which brings flexibility for future wireless networks. The error vector magnitude (EVM) parameter is measured for a range of the received optical and electrical power as well as the signal-to-noise ratio. A comprehensive estimation of penalty factors in the different network segments is presented. The successful transmission over the whole proposed network with the EVM below the required limit of 9 % for 64-QAM with 20 MHz bandwidth is experimentally demonstrated for the received optical power of-2.7 dBm and-1 dBm for the downlink and uplink, respectively., The research has been supported by the CTU in Prague SGS20/166/OHK3/3T/13, project from Ministry of Industry and Trade in Czech Republic (FV40089) and within COST action CA19111 (NEWFOCUS) . It has also been funded by the regional project from Generalitat Valenciana PROMETEO 2021/015 and Grant RTI2018-101658-B-I00 FOCAL by MCIN/AEI/10.13039/501100011033 and ERDF "A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Adhesive assisted fabrication of chirped POF Bragg grating

  • Min, Rui
  • Pereira, Luis
  • Paixao, Tiago
  • Woyessa, Getinet
  • André, Paulo
  • Bang, Ole
  • Frizera, Anselmo
  • Antunes, Paulo
  • Pinto, Joao
  • Li, Zhaohui
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] FBG in polymer optical fibers (POFs) is a promising technology for a wide range of sensing applications due to a lower Young¿s modulus and a large range of applying strain. Furthermore, POFs have several properties which make them attractive for biosensing applications such as nonbrittle nature, flexibility in bending and biocompatibility. Chirped Fiber Bragg gratings (CFBGs), which are characterized by a nonuniform modulation of the refractive index show a broad reflection spectrum, enabling shortlength distributed sensing. The combining benefits of POF and CFBGs is attractive for biomedical applications. Here, we present a novel method to obtain CFBG in POF with a postprocess uniform POF FBG by using resin., The Spanish Ministerio de Ciencia, Innovación y Universidades RTI2018­101658­B­I00 FOCAL Project; National Natural Science Foundation of China (61435006, 61525502); The Science and Technology Planning Project of Guangdong Province (2017B010123005, 2018B010114002); Local Innovation and Research Teams Project of Guangdong Pearl River Talents Program (2017BT01X121). This work was developed within the scope of the project i3N, UIDB/50025/2020 & UIDP/50025/2020, financed by national funds through the FCT/MEC. Luís Pereira and Tiago Paixão acknowledge FCT for the grants SFRH/BD/146295/2019 and PD/BD/128265/2016, respectively. This work is also funded by national funds (OE), through FCT¿I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree­Law 57/2016, of August 29, changed by Law 57/2017, of July 19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chirped POF Bragg grating production utilizing UV cure adhesive coating for multiparameter sensing

  • Min, Rui
  • Pereira, Luis
  • Paixao, Tiago
  • Woyessa, Getinet
  • Hu, Xuehao
  • Antunes, Paulo
  • André, Paulo
  • Bang, Ole
  • Pinto, João
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] In this work, we obtained chirped Bragg gratings by post-coating uniform poly (methylmethacrylate) (PMMA) microstructured polymer optical fiber Bragg gratings (POFBGs) with an UV cure adhesive. The main advantage of the proposed method consists on being a cost-effective and simple solution, since no special phase mask, addi tional etching or gradient thermal annealing are required. A comparison between the fabricated chirped Bragg grating¿s performance and previous reported methods in the literature is presented. As a compact sensor with two different active areas (adhesive coated and uncoated sections of the POFBG), the developed sensing device can be used for multiparameter sensing, namely for strain, humidity and temperature monitoring. Allying the proposed flexible and low-cost fabrication technique with the intrinsic characteristics of POFs, one may conclude that the developed sensor has high potential for multiparameter sensing in possible future engineering and biomedical applications., National Natural Science Foundation of China (62003046) ; The Spanish Ministerio de Ciencia, Innovacion y Universidades RTI2018-101658-B-I00 FOCAL Project; Guangdong Basic and Applied Basic Research Foundation (2021A1515011997) ; Guangdong Recruitment Program of Foreign Experts (2020A1414010393) ; C. Marques ac-knowledges Fundacao para a Ciencia e a Tecnologia (FCT) through the CEECIND/00034/2018 (iFish project) and this work was developed within the scope of the project i3N, UIDB/50025/2020 &UIDP/50025/2020, financed by national funds through the FCT/MEC. Luis Pereira and Tiago Paixao also acknowledge FCT for the grant with references SFRH/BD/146295/2019 and PD/BD/128265/2016, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the 40 GHz Remote Versus Local Photonic Generation for DML-Based C-RAN Optical Fronthaul

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Mora Almerich, José|||0000-0002-2877-4118
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] Local and remote photonic millimeter wave (mmW) signal generation schemes are theoretically and experimentally evaluated in order to compare both approaches for practical deployment in a cloud radio access network (C-RAN) fronthaul network. The paper presents a full comprehensive formulation of the frequency response of a system based on a directly modulated laser transmitting data over 40 GHz signal which is generated by external carrier suppressed modulation and optical frequency multiplication. Theoretical and experimental characterization of the system response at baseband and mmW band for local and remote generation setups show very good agreement. The remote configuration leads to a higher electrical output power (i.e., 15 dB higher in 25 km fiber links) than the local generation setup in the mmW band due to the combined effect of chirp and fiber dispersion, although intermodulation distortion is higher in the former case. Transmission experiments using quadrature phase-shift keying (QPSK) signals with 250 MHz bandwidth centered at 0.5 GHz over 10 and 25 km fiber links also confirm the superior performance of the remote setup, whereas the local setup leads to similar results to optical back-to-back (OB2B) measurements, which is also validated with data signals centered at different frequencies within the laser bandwidth frequency range. Finally, experimental results show the quality of the recovered signals in terms of error vector magnitude (EVM) as a function of the received electrical power and demonstrate that no further penalties are introduced by photonic mmW signal generation with respect to electrical back-to-back (EB2B) levels., This work was supported in part by Generalitat Valenciana through PROMETEO2017/103, in part by Ministerio de Ciencia, Innovacion y Universidades through FOCAL RTI2018-101658-B-I00, in part by MEYES under Grant LTC18008, in part by the Ministry of Industry and Trade in Czech Republic under Grant FV40089, and in part by European Cooperation in Science and Technology under Grants CA16220 and CA19111.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Asymmetric hybrid full-duplex POF-based VLC transmission links

  • Apolo-Gonzaga, Juan Andres
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Teli, Shivani Rajendra
  • Guerra-Yánez, Carlos
  • Zvánovec, Stanislav
[EN] This paper presents an asymmetric full-duplex solution based on visible light communications (VLC) for indoor wired and wireless hybrid signal transmission. The signal is distributed by a polymer optical fiber (POF) link and passively radiated. The proposed system includes two VLC links: a low-speed downlink and a high-speed uplink using an image sensor (IS) and photodiode detection (PD) based receivers. PD-based system communication performance is evaluated by means of error vector magnitude (EVM) for different modulation orders quadrature phase shift keying (QPSK), 16- and 64-quadrature amplitude modulation (QAM), while the IS-based system is characterized in terms of the success of reception (SoR). High-speed data transmission up to 160 Mbps with a 16-QAM modulation scheme and low-speed data transmission up to 500 bps with 98.6% of SoR using a non-return zero on¿off keying (NRZ-OOK) scheme over a 1.5 m optical wireless link are demonstrated. Finally, simulations of the wireless channel are performed to evaluate the misalignment tolerance of the system; and, to estimate the uplink performance at longer distances., This work was based upon work from COST Action CA19111 (European Network on Future Generation Optical Wireless Communication Technologies, NEWFOCUS), supported by COST (European Cooperation in Science and Technology), and also supported by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe under Grant RTI2018-101658- B-I00 FOCAL, and also supported by the Czech Technical University in Prague under the CTU Global Postdoc Fellowship Program and TACR project FW01010571.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Computational Efficient Nyquist Shaping Approach for Short-Reach Optical Communications

  • Pérez Pascual, Mª Asunción|||0000-0002-6925-6878
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Valls Coquillat, Javier|||0000-0002-9390-5022
  • Bruno, Julián S.
[EN] Recently, Half-Cycle Nyquist Subcarrier Modulation (HC-SCM) was proposed to achieve high spectral efficiency in intensity-modulator direct-detection optical links. This paper shows that the HC-SCM scheme has a high computational load and proposes the rational Oversampled Subcarrier Modulation (OVS-SCM) as a computational efficient alternative that, furthermore, improves the spectral efficiency. The presented experimental results show that our 256-QAM proposal allows to transmit below the hard-decision forward error correction, with a throughput of 17.8 Gb/s in a 2.5 GHz bandwidth, and a spectral efficiency of 7.2 b/s/Hz, through 20 km of single-mode optical fiber., This work was supported by the Spanish Ministerio de Economia y Competitividad and FEDER under the Grant TEC2015-70858-C2-2-R and Grant RTI2018-101658-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Low-cost plastic optical fiber sensor embedded in mattress for sleep performance monitoring

  • Han, Pengfei
  • Li, Linqing
  • Zhang, Hao
  • Guan, Longzhou
  • Marques, Carlos
  • Savovic, Svetislav
  • Min, Rui
  • Li, Xiaoli
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] In this study, we investigated plastic optical fiber (POF) pressure sensors embedded in mattresses to measure respiration and heart rate for sleep performance monitoring. The signal is amplified in the circuit using a two stage amplification scheme to collect weak respiration and heart rate signals while an algorithm was designed to obtain respiration and heart rate. We also propose a good reliability cutting-POF technology which can be used to improve pressure sensitivity. The experimental results indicate that the mattress can distinguish four behavioral states related to sleep (on bed, lying, moving and leaving bed) and can detect respiration and heart rate values in different positions and postures. Validation experiments on 10 participants showed that absolute error was less than one breath per minute and two beats per minute, making our approach suitable for household sleeping monitoring., National Natural Science Foundation of China (62003046) ; National Defense Basic Scientific Research Program of China (JCKY2018110B011) ; The Spanish Ministerio de Ciencia, Innovacion y Universidades RTI2018-101658-B-I00 FOCAL Project; Guangdong Recruitment Program of Foreign Experts (2020A1414010393) ; Guangdong Basic and Applied Basic Research Foundation (2021A1515011997) ; C. Marques acknowledges Fundacao para a Ciencia e a Tecnologia (FCT) through the CEECIND/00034/2018 (iFish project) and this work was developed within the scope of the project i3N, UIDB/50025/2020 &UIDP/50025/2020, financed by national funds through the FCT/MEC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hardware Architecture of a QAM Receiver for Short-Range Optical Communications

  • Valls Coquillat, Javier|||0000-0002-9390-5022
  • Torres Carot, Vicente|||0000-0002-6829-7889
  • Pérez Pascual, Mª Asunción|||0000-0002-6925-6878
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
[EN] Short-reach optical fiber communications systems aim to achieve high throughput, in the order of tens of Gbps. The implementation of these high-speed systems requires parallel processing, which makes low-complexity designs of their subsystems a key to the successful large-scale deployment of this technology. Half-Cycle Nyquist Subcarrier Modulation (HC-SCM) was originally suggested for these systems with the goal of using as much bandwidth as possible and, therefore, achieving high communication rates. Recently, Oversampled Subcarrier Modulation (OVS-SCM) was proposed as an alternative more computational efficient than HC-SCM and also with a better spectral efficiency. This paper proposes a hardware-efficient architecture for an OVS-SCM receiver, which takes into account the inherent parallel processing of these systems. This receiver takes 16 samples in parallel from a 5 GSa/s analog-to-digital converter with a 3.2 GHz 3 dB bandwidth. Design solutions for the frame detection block, the mixer, the resampler, the fractional interpolator, the matched filter and the timing estimator are presented. Our results show that, compared to the HC-SCM receiver, this proposal reduces the computational load of the downconverter stages by 90%. FPGA implementation results are given to demonstrate that our proposal can be implemented in state-of-the-art devices., This work was supported in part by MCIN/AEI/10.13039/501100011033 under Grants RTI2018-101658-B100 and PID2021-126514OB-I00, and in part by the European Union through "ERDF Away of making Europe."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

M-QAM signal transmission at the photonically generated K-band over thermal-induced turbulent FSO links with different turbulence distributions

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We present a theoretical and experimental study on the impact of different thermal-induced free-space turbulence distributions on the M-quadrature amplitude modulation (M-QAM) signal transmission in radio frequency K-band over hybrid optical links of standard single mode fiber (SSMF) and free-space optics (FSO). Frequency multiplication using an external intensity modulator biased at the null transmission point has been employed to photonically generate radio signals at a frequency of 25 GHz, included for the frequency bands for fifth-generation (5G) mobile networks. Moreover, extensive simulations have been performed for 10 Gb/s with 4-, 16-, and 64-QAM over 5 km of SSMF and 500 m long FSO channels under scenarios with different turbulence levels and distributions. Proof-of-concept experiments have been conducted for 20 MHz with 4- and 64-QAM over 5 km of SSMF and 2 m long FSO channels under turbulence conditions. Both theoretical and experimental systems have been analyzed in terms of error vector magnitude (EVM) performance showing feasible transmission over the hybrid links in the received optical power range. Non-uniform turbulence distributions are shown to have a different impact on M-QAM modulation formats, i.e., turbulence distributions with higher strength in the middle of the FSO link reveal a 1.9 dB penalty when using 64-QAM signals compared to a 1.3 dB penalty using 4-QAM signals, whereas higher penalties have been measured when 4-QAM format is transmitted over turbulence distributions with larger magnitude in the second half of the FSO link. The results have been validated by theoretical predictions and lead to practical consequences on future networks' deployment., Generalitat Valenciana (PROMETEO 2017/103); Ministerio de Ciencia, Innovacion y Universidades (FOCAL RTI2018-101658-B-I00); Ministerstvo Prumyslu a Obchodu (FV30427) and within European Cooperation in Science andTechnology (CA16220).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hybrid POF/VLC Links Based on a Single LED for Indoor Communications

  • Apolo-Gonzaga, Juan Andres
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
[EN] A hybrid fiber/wireless link based on a single visible LED and free of opto-electronic intermediate conversion stages has been demonstrated for indoor communications. This paper shows the main guidelines for proper coupling in fiber/air/detector interfaces. Experimental demonstration has validated the design results with very good agreement between geometrical optics simulation and received optical power measurements. Different signal bandwidths and modulation formats, i.e., QPSK, 16-QAM, and 64-QAM, have been transmitted over 1.5 m polymer optical fiber (POF) and 1.5 m free-space optics (FSO). Throughputs up to 294 Mb/s using a 64-QAM signal have been demonstrated using a commercial LED, which paves the way for massive deployment in industrial applications, This work was supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades RTI2018-101658-B-I00 FOCAL project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Comparison of carrier suppressed and quadrature bias point external modulation for 40 GHz millimeter-wave photonic generation using a 16-QAM signal with directly modulated laser

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
[EN] A directly modulated laser usage is proposed for 16-QAM signal transmission over hybrid optical links using two optical frequency multiplication schemes based on external modulation for 40 GHz millimeter-wave (mmW) signal generation. We provide an experimental comparison of two possible approaches: quadrature bias point external modulation system using additional optical filter and null transmission point with suppressed carrier. The systems are discussed in terms of cost and complexity of mmW photonic transmission. High error vector magnitude performance of mmW transmission over fiber and free space optics links is demonstrated and an estimation of the sensitivity of the systems is provided, This work was also supported by the Research Excellence Award Programme GVA PROMETEO 2017/103, the Spanish Ministerio de Ciencia, Innovación y Universidades RTI2018-101658-B-I00 FOCAL project, Ministry of Industry and Trade project MPO TRIO FV40089 and within COST CA16220.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical CS-DSB Schemes for 5G mmW Fronthaul Seamless Transmission

  • Bohata, Jan
  • Vallejo-Castro, Luis
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This paper describes the experimental demonstration of the hybrid optical/millimeter wave signal generation and transmission over combined optical fiber and free space optics fronthaul network with a seamless antenna link. An electrical bandpass filter is used to filter out the spectrum after photodetection in order to realize the seamless antenna transmission. The successful transmission of 64/256-quadrature amplitude modulation (QAM) 5G signal with up to 200 MHz bandwidth is presented by using two different setups: one is based on two Mach-Zehnder modulators (MZM) and the other employs a directly modulated laser (DML) to provide more cost efficient fronthaul solution. The DML based approach reveals mildly better performance in comparison to the MZMs in terms of higher achieved signal-to-noise ratio and lower error vector magnitude (EVM). More specifically, the best signal-to-noise ratio and EVM achieved with the DML based setup has been 31.5 dB and 3. 3%, respectively, compared to 30.3 dB and 3.8% with the MZMs based setup while transmitting 256-QAM signal with 100 MHz bandwidth. However, both setups kept the EVM well below the given 9% and 4.5% limit for 64- and 256-QAM, respectively., This work was supported in part by the Ministry of Industry and Trade in Czech Republic under Grant FV40089, in part by EU COST Action NEWFOCUS under Grant CA19111, and in part by the Ministerio de Ciencia, Innovacion y Universidades under Grant FOCAL RTI2018-101658-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Performance and Power Consumption of Bias-T Based Drivers for High Speed VLC

  • Salvador-Llàcer, Pau|||0000-0002-2197-4942
  • Valls Coquillat, Javier|||0000-0002-9390-5022
  • Canet Subiela, Mª José|||0000-0002-6765-9219
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Corral, Juan L.|||0000-0003-0857-5207
[EN] LED lamps have become the predominant technology for lighting thanks to their low power consumption. Recently, the joint use of these devices for lighting and data transmission has aroused interest in the research community as a future green communication technology. During this time, many of the advances developed in this area have been demonstrated with experimental setups using LED drivers based on bias-T, thanks to their ease to combine signal modulation and LED bias. This article discusses the impact of the output impedance of the bias-T driver and the driver-LED connection parasitics on the performance and energy efficiency of the VLC system. It is concluded that the output impedance of the driver not only affects energy efficiency but also modifies the frequency response and, therefore, the LED's capacity to be modulated. A low output impedance driver is shown to offer a substantial improvement in the energy efficiency of the VLC driver., Thisworkwas supported in part by MCIN/AEI/10.13039/501100011033, in part by European Union (ERDF A way of making Europe) under Grants RTI2018101658-B100 and RTI2018-101296-B-I00, and in part byMinisterio de Ciencia, Innovacion y Universidades para la Formacion de Profesorado Universitario under Grant FPU19/04648.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

64-QAM LTE signal transmission at 25 GHz over hybrid SSMF and non-uniform turbulent FSO channel

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This contribution describes the impact of non uniform thermal-induced turbulence on 64-QAM LTE signal transmission at 25 GHz millimeter wave (mmW) signal along hybrid RoF/RoFSO links. Microwave photonic signal generation has been employed by using the optical frequency doubling with intensity modulator biased at the minimum transmission point. The optical and electrical power budgets of different scenarios have been defined and error vector magnitude (EVM) performance has been measured. It is shown that the uniform scenario with high turbulence in the middle of the link is the one with greater impact on the quality of the received data., This work was also supported by the Research Excellence Award Programme GVA PROMETEO 2017/103, the Spanish Ministerio de Ciencia, Innovación y Universidades RTI2018- 101658-B-I00 FOCAL project, Ministry of Industry and Trade in Czech Republic project (FV30427) and within COST CA16220.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of Thermal-Induced Turbulent Distribution Along FSO Link on Transmission of Photonically Generated mmW Signals in the Frequency Range 26¿40 GHz

  • Vallejo-Castro, Luis
  • Komanec, Matej
  • Bohata, Jan
  • Nguyen, Dong-Nhat
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
[EN] Microwave photonics is a promising solution to transmit millimeter wave (mmW) signals for the 5th generation (5G) mobile communications as part of a centralized radio access network (C-RAN). In this paper, we experimentally evaluate the impact of turbulent free space optics links on photonically generated mmW signals in the frequency range of 26¿40 GHz . We analyze the remote generation of mmW signals over hybrid links based on free-space optics (FSO) and standard single mode optical fiber (SSMF) with ¿39.97dBm received electrical power and phase noise level at 100kHz as low as ¿95.92dBcHz at 26GHz . Different thermal distributions along the FSO link have been implemented and Gamma-Gamma model has been employed to estimate the thermally induced turbulence. The results show high electrical power decrease and fluctuation of the generated mmW signal according to the particular level of the turbulence in terms of refractive index structure parameter and thermal distribution along the FSO link. 8Gb/s 16-quadrature amplitude modulation (QAM) data transmission at 42GHz has been demonstrated over the hybrid link with minimal error vector magnitude (EVM) value of 5% whereas turbulent FSO link introduced up to 5dB power penalty., This work was supported in part by the Research Excellence Award Programme GVA under Grant PROMETEO 2017/103 and in part by the Spanish Ministerio de Ciencia, Innovacion y Universidades, under RTI2018-101658-B-I00 FOCAL Project and MEYS Project LTC18008 within COST CA16220.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

OVS-SCM Modulation (raw data)

  • Pérez Pascual, Mª Asunción|||0000-0002-6925-6878
This dataset contains the raw data of the measurements presented in the paper: "A Computational Efficient Nyquist Shaping Approach for Short-Reach Optical Communications" (https://doi.org/10.1109/JLT.2019.2961506). - Medidas_BER_EVM.xls: contains BER and EVM measurements made for different types of modulations for both the HC-SCM modulator and the OVS-SCM, varying the following parameters: oversampling factor, transmitter filter span, rolloff factor, receiver filter span, receiver equalizer order, pre-emphasis filter (in transmission) - Medidas_Potencia.xls: contains BER and EVM values varying the received power for HC-SCM and OVS-SCM modulations; for all QAM modulations under study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

BER-EVM-Power-OVS-SCM (raw data)

  • Pérez Pascual, Mª Asunción|||0000-0002-6925-6878
This dataset contains the raw data of the measurements presented in the paper "Hardware Architecture of a QAM Receiver for Short-Range Optical Communications" (https://doi.org/10.1109/JLT.2022.3217357). Data presents the BER and EVM measurements made by changing the optical power transmitted for the proposed modulator.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Usability of a 5G fronthaul based on a DML and external modulation for M-QAM transmission over photonically generated 40 GHz

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
[EN] In this paper, we numerically and experimentally present the bandwidth constraints of a cost-effective 5G mobile fronthaul based on a directly-modulated laser for data modulation and a Mach-Zehnder modulator-based optical double sideband with carrier suppression scheme for optical millimeter wave (mmW) signal generation. The effect of chirp, fiber dispersion and a combination of both on different bandwidth M-Quadrature Amplitude Modulation (M-QAM) signals, i.e. M = 4, 16 and 64, at 40 GHz has also been investigated. Simulation results are firrst carried out to evaluate the impact of higher chirp of the directly-modulated laser on the link performance as a function of modulation format and signal bandwidth. We then experimentally demonstrate the same scheme transmitting M-QAM signals with bandwidths ranging from 50 to 1000 MHz over a 10 km long single mode fiber. Both experimental and simulation results show that larger signal bandwidths lead to higher optical power penalties due to the combined effect with the error vector magnitudes (EVMs), however still satisfying the required limits of 3GPP standard for allQAMsignals. Experimental measurements also showthe feasibility of including free space optics links in the optical distribution network with no further signi cant penalties. Finally, a multiband signal (three-band) transmission is demonstrated leading to an increase of the total bitrate with the measured EVMs are well below the EVM requirement., This work was supported in part by the Generalitat Valenciana under Grant PROMETEO 2017/103, in part by the Ministerio de Ciencia, Innovacion y Universidades under Grant FOCAL RTI2018-101658-B-I00, in part by the Ministerstvo Prumyslu a Obchodu under Grant FV40089, and in part by the European Cooperation in Science and Technology under Grant CA16220.