Skip to main content

RED DE PILAS DE COMBUSTIBLE PARA UN FUTURO ENERGETICO SOSTENIBLE

ENE2017-90932-REDT

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Redes Investigación /Redes Excelencia
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Charge transfer mechanisms in 40SiO2-40P2O5-20ZrO2 /sulfonated styrene-ethylene-butylene-styrene hybrid membranes for low temperature fuel cells

  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • CARMEN DEL RIO
  • J.Mosa
[EN] A series of hybrid membranes synthetized via sol-gel chemistry and direct infiltration method have been pre-pared, consisting of sulfonated styrene-ethylene-butylene-styrene block copolymer (sSEBS), as polymeric matrix, and a zirconia modified phosphosilicate (40SiO2-40P2O5-20ZrO2) as inorganic component. The infiltration procedure has been carried out by immersion of sSEBS membranes in a 40SiO2-40P2O5-20ZrO2 sol solution for 5, 10, 20, and 40 min. The hybrid infiltrated membranes (sSEBS-Zr) have been thermally characterized to further investigate their suitability as electrolytes for low temperature fuel cells. TGA thermograms showed that sSEBS-Zr were more thermally stable than sSEBS. DSC thermograms showed that the addition of inorganic component decreases the Tg of the polystyrene block in hybrid membranes sSEBS-Zr. DETA showed significant differences in the charge transfer mechanisms between low and high temperature regions. The through-plane proton con-ductivity analysis showed that the sSEBS-Zr infiltrated 10 min had a better proton conductive capacity at 333K, thus showing that longer infiltration times might induce excessive M-O-M ' bonds, causing competition for the available proton sites. These results indicated that the proposed methodology shows good agreement with experimental performance data in hydrogen PEMFCs. Nonetheless, when DMFCs are considered, minimizing the permeability of methanol enhances more the performance than increasing the proton conductivity., The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry, and Competitiveness for the research projects REPICOMES (ENE2017-90932-REDT) and POLY-ELMETH (PID2020-116322RB-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Triblock SEBS/DVB crosslinked and sulfonated membranes: fuel cell performance and conductivity

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • del Río, Carmen
  • Gil-Castell, O.
  • Primaz, Carmem
[EN] A set of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) membranes with 10 or 25 wt.% divinyl-benzene (DVB) as a crosslinking agent were prepared and validated. Physicochemical characterization revealed suitable hydrolytic and thermal stability of photo-crosslinked membranes containing 25%wt. DVB and post-sulfonated. These compositions were evaluated in H2/O2 single cells, and electrical and proton conductivities were furtherly assessed. The membranes with the milder post-sulfonation showed greater proton conductivity than those with excessive sulfonation. In terms of electrical conductivity, a universal power law was applied, and the values obtained were low enough for being used as polyelectrolytes. At the analyzed temperatures, the charge transport process follows a long-range pathway or vehicular model. Finally, fuel cell performance revealed the best behavior for the membrane with 25 wt.% DVB, photo-crosslinked during 30 min and mild sulfonated, with a promising power density of 526 mW·cm-2. Overall, the results obtained highlight the promising fuel cell performance of these cost-effective triblock copolymer-based membranes and indicate that higher sulfonation does not necessarily imply better power density., Ministerio de Economía, Industria y Competitividad, Gobierno de España, Grant/Award Number: ENE2017-86711-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance of sulfonated poly(vinyl alcohol)/graphene oxide polyelectrolytes for direct methanol fuel cells

  • Gil-Castell, Óscar
  • Santiago, Óscar
  • Navarro, Emilio
  • Leo, Teresa J.
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The use nanotechnology along with the consideration of a functionalization and stabilization approach to the poly(vinyl alcohol) (PVA) was considered useful for the preparation of cost-effective polyelectrolyte membranes. A set of nanocomposite and crosslinked membranes based in PVA/SSA/GO were prepared and analyzed as polyelectrolytes in direct methanol fuel cells (DMFCs). The crosslinking and sulfonation by the use of sulfosuccinic acid (SSA) enhanced the stability and increased the proton conducting sites in the PVA structure. The presence of graphene oxide (GO) augmented the stability, remarkably decreased the methanol crossover and enhanced power density curves. An optimum value for proton conductivity was found for the 0.50%wt of GO proportion, which decreased to higher concentrations of GO. Given the power density curve dependency on both the proton conductivity and the crossover reduction, the performance of these membranes as polyelectrolytes in DMFCs is strictly related to the balance between both factors. Therefore, a proportion of GO of 0.75%wt may assure suitable proton conductivity 3 mS·cm-1 and high resistance to methanol permeability, reaching promising power density of 16 mW·cm-2 with lower hydration levels., The Spanish Ministry of Economy, Industry, and Competitiveness is acknowledged for the projects ENE2017-86711-C3-1-R, ENE2017-86711-C3-2-R, ENE2017-90932-REDT, and UPOV13-3E-1947. The Spanish Ministry of Education, Culture, and Sports is thanked for the predoctoral FPU grant for O. Gil-Castell (grant no. FPU13/01916).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dielectric analysis of photocrosslinked and post-sulfonated styrene-ethylene-butylene-styrene block copolymer based membranes

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • del Río, C.
  • García, O.
[EN] A series of UV photocrosslinked and post-sulfonated membranes based on blends of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) and divinylbenzene (DVB) were considered for the preparation of electrolytes for proton exchange membrane fuel cell (PEMFC) applications. Macromolecular dynamics of SEBS and SEBS-DVB membranes below and above the Tg, were analysed using dielectric thermal analysis (DETA). A sub-Tg intramolecular non-cooperative dielectric relaxation and two main relaxations, corresponding to the glass transitions of ethylene-butylene (EB) and styrene (S) blocks, were identified in the dielectric relaxation spectrum. The photocrosslinking and post-sulfonation processes affect to the entire dielectric relaxation spectrum, the apparent activation energy and the fragilities of both styrene (S) and ethylene-butylene (EB) blocks. Understanding the restrictions on the segmental mobility at low and high scale caused by both photocrosslinking and subsequent sulfonation is basic to provide an approach to ionic diffusivities. A correlation between relaxations processes and the performance of these membranes in H2/O2 - PEM single cells allows to estimate the behaviour of these membranes and to reengineer them, depending on the modification of the desired cell performance., The authors would like to thank the support of the European Union is through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry and Competitiveness, for the research projects POLYDECARBOCELL (ENE2017-86711-C3-1-R), REPICOMES (ENE2017-90932-REDT) and UPV-(PAID -10-19) SUB-1 grant for R. Teruel.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Layered Lanthanide Sulfophosphonates and Their Proton Conduction Properties in Membrane Electrode Assemblies

  • Bazaga-García, Montse
  • Salcedo, I.R.
  • Colodrero, Rosario M. P.
  • Xanthopoulos, K.
  • Villemin, D.
  • Stock, N.
  • López-González, Mar
  • Río, Carmen del
  • Losilla, E. R.
  • Cabeza, A.
  • Demadis, K. D.
  • Olivera-Pastor, P.
Metal phosphonates containing acidic groups exhibit a wide range of proton conduction properties, which may enhance the performance of membrane electrode assemblies (MEAs). In this work, focus is placed on proton conduction properties of coordination polymers derived from the combination of lanthanide ions with a phosphonate derivative of taurine (2-[bis(phosphonomethyl)amino]ethanesulfonic acid, HSP). High-throughput hydrothermal screening (140 °C) was used to reach optimal synthesis conditions and access pure crystalline phases. Seven compounds with the composition Ln[H(OPCH)-NH-(CH)-SO]·2HO were isolated and characterized, which crystallize in two different structures, monoclinic m-LaHSP and orthorhombic o-LnHSP (Ln = Pr, Nd, Sm, Eu, Gd, and Tb), with unit cell volumes of ∼1200 and ∼2500 Å, respectively. Their crystal structures, solved ab initio from X-ray powder diffraction data, correspond to different layered frameworks depending on the Ln cation size. In the orthorhombic series, o-LnHSP, the sulfonate group is noncoordinated and points toward the interlayer space, while for m-LaHSP, both phosphonate and sulfonate groups coordinate to the Ln centers. As a consequence, different H-bonding networks and proton transfer pathways are generated. Proton conductivity measurements have been carried out between 25 and 80 °C at 70-95% relative humidity. The Sm derivative exhibits a conductivity of ∼1 × 10 S·cm and activation energy characteristic of a Grotthuss-type mechanism for proton transfer. Preliminary MEA assays indicate that these layered lanthanide sulfophosphonates assist in maintaining the proton conductivity of Nafion membranes at least up to 90 °C and perform satisfactorily in single proton-exchange membrane fuel cells., The work at UMA was funded by MAT2016-77648-R research grant (Spain) and by Junta de Andalucía through the P12- FQM-1656 research project. M.B.-G. thanks UMA Research Plan for financial support. The work at CSIC-Madrid was funded by PROTONCELL ENE2017-86711-C3-1-R and REPICOMES ENE2017-90932-REDT and MAT2016-81001- P. The work at UoC was supported by grants from the Research Committee of the University of Crete, ELKE (grant no. KA 10329).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dielectric analysis of photocrosslinked and post-sulfonated styrene-ethylene-butylene-styrene block copolymer based membranes

  • Teruel-Juanes, Roberto
  • Pascual-Jose, B.
  • Río, Carmen del
  • García Ballesteros, Olga
  • Ribes-Greus, Amparo
A series of UV photocrosslinked and post-sulfonated membranes based on blends of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) and divinylbenzene (DVB) were considered for the preparation of electrolytes for proton exchange membrane fuel cell (PEMFC) applications. Macromolecular dynamics of SEBS and SEBS-DVB membranes below and above the T, were analysed using dielectric thermal analysis (DETA). A sub-Tg intramolecular non-cooperative dielectric relaxation and two main relaxations, corresponding to the glass transitions of ethylene-butylene (EB) and styrene (S) blocks, were identified in the dielectric relaxation spectrum. The photocrosslinking and post-sulfonation processes affect to the entire dielectric relaxation spectrum, the apparent activation energy and the fragilities of both styrene (S) and ethylene-butylene (EB) blocks. Understanding the restrictions on the segmental mobility at low and high scale caused by both photocrosslinking and subsequent sulfonation is basic to provide an approach to ionic diffusivities. A correlation between relaxations processes and the performance of these membranes in H/O – PEM single cells allows to estimate the behaviour of these membranes and to reengineer them, depending on the modification of the desired cell performance., The authors would like to thank the support of the European Union is through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry and Competitiveness, for the research projects POLYDECARBOCELL (ENE2017-86711-C3-1-R), REPICOMES (ENE2017-90932-REDT) and UPV- (PAID -10-19) SUB-1 grant for R. Teruel.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

40SiO2–40P2O5–20ZrO2 sol-gel infiltrated sSEBS membranes with improved methanol crossover and cell performance for direct methanol fuel cell applications

  • Santiago, O.
  • Mosa Ruiz, Jadra
  • Navarro, Elena
  • Chinarro Martín, Eva
  • Aparicio, Mario
  • Leo, T. J.
  • Del Río, C.
Membranes commonly used in direct methanol fuel cell (DMFC) are expensive and show a great permeability to methanol which reduces fuel utilization and leads to mixed potential at the cathode. In this work, sulfonated styrene-ethylene-butylene-styrene (sSEBS) modified membranes with zirconia silica phosphate sol-gel phase are developed and studied in order to evaluate their potential use in DMFC applications. The synthesized hybrid membranes and sSEBS are subjected to an exhaustive physicochemical characterization by liquid uptake, ion exchange capacity, atomic force microscopy, X-ray photoelectron spectroscopy and dynamic mechanical and thermogravimetric analyses. Likewise, the potential use of the prepared membranes in DMFC is evaluated by means of electrochemical characterizations in single cell, determining the limiting methanol crossover current densities, proton conductivities and DMFC performances. The hybrid membranes show lower water and methanol uptakes, higher stiffness, water retention capability, upper power density and lower methanol crossover than sSEBS and Nafion 112., The authors would like to acknowledge Comunidad de Madrid and European Social Fund (ESF) through the Project S2013/MAE-2975 PILCONAER. The Spanish Ministry of Economy, Industry and Competitiveness is also thanked for the Research Projects MINECO ENE2013-49111-C2-1-R, ENE2014-53734-C2-2-R, ENE2017-86711-C3-1-R, ENE2017-86711-C3-2-R and ENE2017-90932-REDT