Skip to main content

BIOENERGIA A PARTIR DE ESTIERCOL PORCINO CON REDUCCION DE EMISIONES DE GASES DE EFECTO INVERNADERO MEDIANTE EL USO DE TRANSPORTADORES SOLIDOS DE OXIGENO

PID2019-106441RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of the redox capability of manganese‑titanium mixed oxides for thermochemical energy storage and chemical looping processes

  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
7 figures, 6 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Manganese oxides are capable of releasing molecular oxygen and regenerate in air under determined conditions. This fact makes these materials interesting for applications in different areas, such as thermochemical energy storage processes, oxygen production by chemical looping air separation (CLAS) or CO2 capture-oriented processes, namely chemical looping combustion (CLC) or chemical looping with oxygen uncoupling (CLOU). In this work, the potential to release molecular oxygen and regenerate in air of different manganese‑titanium mixed oxides with mass fractions of titanium from 0 to 50%, were evaluated in a TGA apparatus. Besides, the reactivity of the mixed oxide samples to the main fuel gases (CO, H2 and CH4) has been also evaluated. Consecutive redox cycles have been performed at different temperatures (850 and 940 °C) using nitrogen during reduction and air in oxidation. The oxygen transport capacity as well as the rate index for oxygen uncoupling and gas-solid reactions have been determined and compared to that found for other materials reported in literature. Moreover, solid phase identification in the different mixed oxide samples by XRD has been addressed in order to determine the oxygen release/regeneration mechanism. Results show a great potential of these materials as low-cost and environmentally friendly oxygen carriers., This work was partially supported by the projects ENE2017-89473-R (AEI/FEDER, UE) and PID2019-106441RB-I00. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the optimization of physical and chemical stability of a Cu/Al2O3 impregnated oxygen carrier for chemical looping combustion

  • Izquierdo Pantoja, María Teresa
  • García Labiano, Francisco
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
10 figures, 3 tables.-- Supplementary material available.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The objective of this study was to evaluate the effect of the chemical and thermal stress on the physical and chemical stability of a CuO/Al2O3 impregnated oxygen carrier during methane chemical looping combustion at high oxygen carrier to fuel ratios to ensure low solid conversion variations. The Cu-based particles were subjected to 130 h of operation in a 0.5 kWth chemical looping combustion unit burning CH4 at steady state and unchanged conditions. Two batches of particles were used to operate the fuel and air reactor either at 800 °C or 900 °C. A full solid characterization regarding crystalline compounds, oxidation state, ASTM attrition index, crushing strength and morphology analysis was carried out in order to investigate the physical and chemical stability of the oxygen carrier. Main conclusion derived from this research work is that the low oxygen carrier conversion variation allowed reducing the chemical stress and as consequence the copper loss from particles. However, the oxygen carrier was difficult to reoxidize at 900 °C due to the formation of CuAlO2. Operating at temperatures about 800 °C and at low solid conversion variation is proposed since copper loss was limited maintaining an adequate physical stability., This work has been supported by the projects AEI/FEDER, UE (ENE2017-89473-R) and PID2019-106441RB-I00/AEI/10.13039/501100011033), and by the Regional Aragon Government (T05_17R and LMP180–18)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Increasing energy efficiency in chemical looping combustion of methane by in-situ activation of perovskite-based oxygen carriers

  • Cabello Flores, Arturo
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
12 figures, 3 tables.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, CaMnO3-based perovskites are attractive for use as oxygen carriers in chemical looping combustion (CLC) because they are made from cheap materials (manganese, calcium). However, these materials show low reactivity with methane, and high oxygen carrier-to-fuel ratios (ϕ) are required to achieve complete fuel combustion. It is believed that energy efficiency in the chemical looping process would be improved if the reactivity of these materials were higher. In this work, the increase in reactivity of a perovskite (CaMn0.775Mg0.1Ti0.125O2.9-δ) material is evaluated during its in-situ activation under determined operating conditions in a 0.5 kWth CLC pilot plant. The combustion efficiency of methane over 60 h of continuous operation was analysed taking into consideration the effect of operating conditions on the activation process for increasing the reactivity of the perovskite. The material increased in reactivity as the ϕ ratio decreased to below 6, improving combustion efficiency. Moreover, the material was pre-activated by being fully reduced in the CLC plant. The conversion of methane with the pre-activated material was subsequently higher than the conversion achieved before the activation process, and almost complete combustion was achieved at a lower ϕ ratio. Characterization of the particles after the combustion tests showed good stability of the material with the operating time, although a negative effect on the crushing strength was observed when the particles were highly reduced. The impact of the perovskite material activation on the energy efficiency of the process is discussed., This work was partially supported by the SWINELOOP project (PID2019-106441RB-I00/AEI/10.13039/501100011033) and the SUCCESS Project, funded by the European Commission under the Seventh Framework Programme (Grant agreement No. 608571). J. Adánez thanks CSIC for the financial support given to the project 201980E043., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of a magnetic Cu-based oxygen carrier for the chemical looping with oxygen uncoupling (CLOU) process

  • Adánez-Rubio, Iñaki
  • Bautista, Hector
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
10 figures, 3 tables.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical looping with oxygen uncoupling (CLOU) is an efficient process for solid fuel combustion with CO2 capture. This process requires a material that is capable of releasing gaseous O2 within a high temperature window. Screening was performed of reactive CuO-based oxygen carriers prepared for the CLOU process with magnetic properties for easy separation from solid fuel ashes. The effects of the CuO fraction, method of preparation (with prior preparation of the magnetic Fe-Mn support or by direct mixing of Cu, Fe and Mn oxides) and calcination conditions on oxygen carrier performance were studied. Three oxygen carriers were chosen owing to their good Cu activity, reactivity and magnetism, and were prepared by fluidized-bed granulation for evaluation in a batch fluidized bed reactor. Two of these, both with a 30% CuO content, showed similar performance throughout the process. One was prepared by physically mixing components with a Mn/Fe ratio of 1:1, and the other was prepared using a previously calcined Fe-Mn support, mixed with CuO. Both oxygen carriers showed high reactivity for gaseous oxygen release, sustained reactivity and magnetism with redox cycles, in addition to low attrition rates and no agglomeration problems., The work presented in this article is partially funded by the State Research Agency of Spain (PID2019-106441RB-I00/AEI/10.13039/501100011033) and the Spanish National Research Council (CSIC) through the Intramural Project (201980E043)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Qualification of operating conditions to extend oxygen carrier utilization in the scaling up of chemical looping processes

  • Cabello Flores, Arturo
  • Abad Secades, Alberto
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Adánez Elorza, Juan
16 figures, 5 tables.-- Supplementary information available., Chemical looping combustion (CLC) is a technology allowing CO2 capture at low cost. The development of durable oxygen carrier materials is a key factor for the scale-up of CLC. Once a promising oxygen carrier has been identified dedicated studies into the effects of reaction conditions on the durability of these kinds of materials are required in order to improve their reliability before use at industrial scale. This method requires several long-term tests in CLC units each one of them to fixed conditions, which is time consuming and expensive. In this work, a low-effort method using thermogravimetric analysis was developed and validated against a high-effort method requiring the use of an oxygen carrier material for hundreds of hours in a CLC unit. The reaction pathways and variation in physico-chemical properties of a material with 14 wt% CuO impregnated on γ-Al2O3 during the course of 300 redox cycles were evaluated as a function of reaction temperature, variation in oxygen carrier conversion (ΔXs) and degree of oxidation/reduction in every redox cycle. As a result, preferred conditions to be used in a CLC unit were identified. In general, reactivity and mechanical integrity were not affected when the reaction temperature was 800 °C. However, a temperature of 900 °C was found to be potentially suitable when the material was highly reduced in each redox cycle and ΔXs was low. The use of this method for promising oxygen carriers can boost the identification of long lasting materials for the scale-up of chemical looping processes., This work was funded by the State Research Agency of Spain (projects PID2019-106441RB-I00/AEI/10.13039/501100011033 and ENE2017-89473-R, AEI/FEDER, EU), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Iron-based oxygen carrier particles produced from micronized size minerals or industrial wastes

  • Zornoza, Beatriz
  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
11 figures, 5 tables.-- Supplementary material available., The production of highly reactive oxygen carrier particles based on low-cost iron materials is explored for chemical looping processes. Ten different low-cost Fe-based materials in the micronized size, both minerals and industrial residues, have been tested as precursors of oxygen carrier particles. The redox reactivity of each of the materials is evaluated and compared to the state-of-the art with particulate materials, including one new material introduced in this work. Due to its excellent reactivity, Promifer material was used to produce oxygen carrier particles by pelletizing and granulation. Considering a trade-off between crushing strength and reactivity, pelletizing process was selected. This material calcined at 950 °C showed high reactivity with CH4. If a higher operating temperature was required, e.g. 1000 °C with solid fuels, the reactivity decreased. Low attrition rates and good fluid-dynamic behavior with the pelletized particles, without agglomeration along the redox cycles, were found in a fluidized bed reactor., This work was supported by the SWINELOOP project (Grant PID2019-106441RB-I00 funded by MCIN/AEI/10.13039/501100011033). B.Z. acknowledges the “Juan de la Cierva” Program (Grant IJCI-2016-30776 funded by MCIN/AEI/10.13039/501100011033). Authors thank PROMINDSA for supplying the evaluated materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ca-based sorbents as precursors of oxygen carriers in chemical looping combustion of sulfurous fuels

  • Obras-Loscertales, Margarita de las
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
10 figures, 3 tables., Limestone Chemical Looping Combustion process (LCL-C™) patented by Alstom Power Inc. proposes the formation of a CaSO4 oxygen carrier via sulfur retention process when supplying a Ca-based sorbent together with sulfurous fuels in the fuel reactor. In the present research work, four Ca-based sorbents, three limestones and one dolomite with different physico-chemical characteristics, have been evaluated as oxygen carrier precursors during consecutive redox cycles by thermogravimetric analysis. 5% H2 and 3000 vppm H2S (N2 to balance) and 10% O2 (N2 to balance) were selected as reducing and oxidizing gases, respectively. Additionally, an anhydrite ore has also been studied for comparison purpose. Results from SEM-EDX characterization of the sorbent particles revealed the existence of three different sulfation patterns: (1) uniform distribution, (2) core–shell structure and (3) high sulfur content with high limitation to be converted into CaSO4. All sorbents exhibited high oxygen transport capacity (Roc = 13.3–20.8%), except for the material showing pattern (3) (Roc = 2.6%). Likewise, the materials presented high reactivity with rate index values ranged between 11.0 and 18.8%/min. Therefore, the Ca-based sorbents herein assessed can be considered suitable precursors for the formation of CaSO4 based oxygen carriers to be used in CLC systems burning sulfurous fuels., This work was supported by the SWINELOOP project, Grant PID2019-106441RB-I00 funded by MICIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coal and biomass combustion with CO2 capture by CLOU process using a magnetic Fe-Mn-supported CuO oxygen carrier

  • Adánez-Rubio, Iñaki
  • Samprón, Iván
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
8 figures, 5 tables., The Chemical Looping with Oxygen Uncoupling (CLOU) process is a derivative technology of the Chemical Looping Combustion (CLC) process for the combustion of both renewable and non-renewable solid fuels. The present work studies the combustion and CO2 capture efficiency of burning coal or biomass using a single Cu-based oxygen carrier with magnetic properties as an oxygen carrier. The combustion of two different coals and three different biomasses was performed in a 1.5 kWth CLOU continuously operated unit for 36 h. The magnetic properties of the oxygen carrier were also studied after combustion and its separation from the ashes. Complete combustion of the fuel to CO2 and H2O was achieved in all cases. For both coals, CO2 capture efficiency increased with fuel reactor temperature, with both reaching values of 97% at 900 °C. The same increase was obtained with the biomasses. The highest CO2 capture efficiency for a biomass was obtained with pine sawdust, which achieved a value of 93%, followed by almond shell (86%) and olive stone (80%) at 900 °C. Oxygen carrier reactivity remained constant after use in the continuous unit with one small increase in the attrition jet index (AJI) value. The used particles were found to still be as magnetic as the fresh particles, and the fines were also highly magnetic. Values higher than 99% were achieved with separation from the fines reached. It was therefore proven that the elutriated oxygen carrier from the plant was still magnetic and could be easily separated from the elutriated ash., The work presented in this article was supported by the SWINELOOP project (Grant PID2019-106441RB-I00 funded by MCIN/AEI/10.13039/501100011033) and the Spanish Research Council (CSIC) through the Intramural Project (201980E043). I. Adánez-Rubio acknowledges for “Juan de la Cierva” Program (Grant IJC2019-038987-I funded by MCIN/AEI/10.13039/501100011033). I. Samprón acknowledges for the pre-doctoral fellowship (Grant PRE-086217 funded by MCIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of oxygen carriers based on manganese‑iron mixed oxides prepared from natural ores or industrial waste products for chemical looping processes

  • Zornoza, Beatriz
  • Mendiara, Teresa
  • Abad Secades, Alberto
10 figures, 6 tables., Manganese‑iron mixed oxides have been identified as promising oxygen carrier materials in chemical looping processes. In this work, low-cost raw materials are considered for the production of this type of oxygen carrier. Four manganese based minerals from deposits of different locations – South Africa, Gabon(x2) and Brazil – and two iron based materials (Fe-ore from Spain and Redmud waste) were used to prepare suitable oxygen carriers through a new two-step production method: a mixing-grinding (about 5 μm) pre-treatment followed by pelletizing, crushing and sieving to produce particles of the desired size (100–300 μm). This method was required in order to form the MnFe mixed oxide and to provide permanent magnetic properties, which were not found when the oxygen carriers were prepared by the classical one-step method, i.e. crushing and sieving of raw materials to the desired particle size (100–300 μm). The oxygen uncoupling capability of the developed materials was extremely low and even completely lost after repeated redox cycles. However, they were reactive under chemical looping conditions with H, CO and CH. Reactivity varied with the raw materials used and with the redox cycles, being of crucial importance for its evolution the intensity of the chemical stress during hundreds of redox cycles., This work was supported by the SWINELOOP project (PID2019-106441RB-I00/AEI/10.13039/501100011033). B.Z. acknowledges the “Juan de la Cierva” Program (IJCI-2016-30776)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Techno-economic analysis of a chemical looping combustion process for biogas generated from livestock farming and agro-industrial waste

  • Cabello Flores, Arturo
  • Mendiara, Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
6 figures, 10 tables.-- Supplementary information available., Biogas is a renewable fuel that is generated from the decomposition of organic matter through the process of anaerobic digestion. The compound that provides biogas with its energy value is CH4, which accounts for between 40% and 75% of the gas, with CO2 being the other main component of this fuel. Although the biogas valorization process is carbon neutral, the overall process can become carbon negative with the application of CO2 capture technologies, such as chemical looping combustion (CLC). This work presents a techno-economic analysis of a 5 MWth plant for the generation of biogas from livestock farming and agro-industrial waste to produce electricity + heat or heat only (base cases), or for further treatment in a CLC unit (CLC cases), where the captured CO2 is converted into a raw material, e.g. for the production of greenhouse crops. Results from the comparative study of five different oxygen carriers used in CLC are also presented. The profitability of the base cases was evaluated by means of the Levelized Cost of Electricity (LCOE) and Levelized Cost of Thermal Energy (LCOTE) metrics, whereas the economic performance of the CLC cases was measured by the Levelized Cost of CO2 (LCOCO2). LCOE gave a value of €139.90/MWh for the base case, and LCOTE was €56.50/MWh for the modified base case, where biogas was combusted in a boiler to produce only heat. With regard to the CLC cases, LCOCO2 values ranged between €148.60 per tonne for a highly reactive, synthetic Cu-based oxygen carrier and €177.10 per tonne for ilmenite. Finally, by comparing the economic results obtained in this work with those found in the literature for conventional biogas production plants and greenhouse crop production processes, it can be concluded that the implementation of CLC technology in biogas plants has the potential to become a profitable and environmentally sustainable option for the valorization of organic waste because the CO2 generated in the fuel reactor of the CLC unit can be considered a marketable, high value-added product for the niche market of the greenhouse farming of horticultural crops., This work was supported by the SWINELOOP (PID2019-106441RB-I00/AEI/10.13039/501100011033) and CSIC 202180I016 projects. A. Cabello is also grateful for Grant IJC2019-038908-I funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ilmenite: A promising oxygen carrier for the scale-up of chemical looping

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
28 figures, 8 tables., To tackle the scale-up of Chemical Looping Processes, the production of efficient and affordable oxygen carriers appears of paramount importance. Ilmenite is an ore-derived oxygen carrier which can be considered surely abundant and cheap. The preparation and the characterization of its reactivity are presented in the following paper. The paper describes briefly the performance of ilmenite relating it to other oxygen carriers, its thermodynamic properties, the kinetics and its use with fuels (solid, liquid and gaseous, including biofuels). Key features for an oxygen carrier are represented by costs and environmental sustainability, oxygen transport capacity and reactivity, as well as specific issues related to its use in fluidized bed reactors, namely agglomeration and attrition behavior. In addition, information about mutual interaction with fuel, considering also the influence of impurities, coke deposition or its effect on the gasification rate of solid fuels, is reported., This work has been partially funded by the GTCLC-NEG project, that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756, and the SWINELOOP project (PID2019-106441RB-I00 funded by MICIN/AEI/10.13039/501100011033). A. Cabello also thanks the Grant IJC2019-038908-I funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Developing magnetic, durable, agglomeration resistant and reactive copper-based oxygen carrier particles by promoting a kaolin-reinforced, manganese‑iron mixed oxide support

  • Filsouf, Amirhossein
  • Adánez-Rubio, Iñaki
  • Mendiara, Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
9 figures, 2 tables., Chemical looping with oxygen uncoupling (CLOU) process, involves the use of two interconnected fluidized bed reactors, where oxygen carrier particles are able to release O2 at the fuel reactor operation conditions. Cu-based oxygen carriers containing a kaolin-reinforced MnFe mixed oxide as magnetic support, were prepared by granulation to improve their oxygen carrier properties by means of a simplified preparation method. A study was performed into the effect of kaolin concentration and calcination temperature on magnetic permeability, crushing strength, attrition, agglomeration resistance, and reactivity. Two oxygen carriers containing 28.5 wt% CuO-5 wt% kaolin and 30 wt% CuO-7.5 wt% kaolin, respectively, and both calcined at 1100 °C, were selected because they maintained their magnetic properties and reactivity after kaolin addition and showed improvement in their mechanical resistance. They were tested in a batch fluidized bed reactor (BFBR) to evaluate their fluidization behaviour. Low attrition rate without any agglomeration phenomena was observed for both of oxygen carriers up to temperature of 950 °C. The material prepared with 7.5 wt% kaolin demonstrated improved mechanical resistance, very low attrition rate and higher CuO utilization for the CLOU process after use in the BFBR, while maintaining reactivity during redox cycles and magnetic properties without agglomeration problems., This work was supported by the SWINELOOP project, Grant PID2019-106441RB-I00 funded by MICIN/AEI/http://dx.doi.org/10.13039/501100011033, the Gobierno de Aragón – Dpto. de Ciencia, Universidad y Sociedad del Conocimiento - Project LMP166_21, and the Spanish Research Council (CSIC) through the Intramural Project (201980E043). I. Adánez-Rubio acknowledges for “Juan de la Cierva” Program (Grant IJC2019-038987-I funded by MCIN/AEI/http://dx.doi.org/10.13039/501100011033). A. Filsouf thanks Combustión y Gasificación T05_20R for the funding received., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Outstanding performance of a Cu-based oxygen carrier impregnated on alumina in chemical looping combustion

  • Cabello Flores, Arturo
  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
10 figures, 3 tables.-- Supplementary information available., Chemical looping combustion (CLC) allows the combustion of a fuel with inherent CO2 capture by using an oxygen carrier to transfer the oxygen from the air to the fuel. Previously to the CLC scale-up, tests should be done in lab-scale CLC units to determine the combustion performance of promising oxygen carriers and, at the same time, to evaluate the durability of these materials. For that, the effect of operating conditions on the oxygen carrier ageing should be considered, which is often disregarded. In this work, tests were done burning a simulated biogas stream in a continuous 500 Wth CLC unit with a promising Cu-based oxygen carrier (Cu14Al_ICB). Operating conditions were carefully selected to maximize the durability of this oxygen carrier while complete CH4 combustion was achieved. These operating conditions were based on limiting both the variation of solids conversion by choosing suitable solids circulation rates and the oxidation degree of the particles in the air reactor by minimizing the air excess. Thus, the Cu14Al_ICB material exhibited an excellent mechanical resistance, estimating a particle lifetime of 20,000 h at 900 °C. In addition, copper migration to the surface of the particles and loss of copper were not relevant. This is the first time that under certain operating conditions, a Cu-based oxygen carrier can exhibit outstanding mechanical properties during continuous CLC operation at 900 °C., The work presented in this article was supported by the SWINELOOP project (Grant PID2019-106441RB-I00 funded by MCIN/AEI/10.13039/501100011033). A. Cabello also thanks the Grant IJC2019-038908-I funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance of a kaolin-doped, magnetic Cu-based oxygen carrier in biomass combustion

  • Adánez-Rubio, Iñaki
  • Filsouf, Amirhossein
  • Durmaz, M.
  • Mendiara, Teresa
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
12 figures, 3 tables., Chemical looping combustion with oxygen uncoupling (CLOU) enables solid fuel combustion with CO capture at low cost due to the capacity of the oxygen carrier to release molecular oxygen. The present study is focused on testing the performance of a magnetic Cu-based oxygen carrier with reinforced mechanical properties owing to the addition of kaolin via the combustion of three types of biomass in a 1.5 kW continuous CLOU unit. The effect of the main operating variables on process performance parameters was studied. Complete combustion of the different biomass types was achieved. Higher CO capture efficiencies were observed at 800–950 °C compared to the previous work done with this oxygen carrier without kaolin doping. The highest value of 97.5% CO capture efficiency was obtained at 950 °C during the combustion of pine sawdust. Moreover, the oxygen carrier retained its magnetic properties without any agglomeration problems after 80 h of hot circulation operation., This work was supported by the SWINELOOP project, Grant PID2019-106441RB-I00 funded by MICIN/AEI/10.13039/501100011033 and the Gobierno de Aragón – Dpto. de Ciencia, Universidad y Sociedad del Conocimiento - Project LMP166_21. I. Adánez-Rubio acknowledges the “Juan de la Cierva” programme (Grant IJC2019-038987-I funded by MCIN/AEI/10.13039/501100011033). A. Filsouf is grateful to the Combustión y Gasificación Group T05_20R for the funding received. Merve Durmaz acknowledges the grant provided by the Erasmus+ Student Mobility for Traineeships programme (2019-1-TR01-KA103-067410)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sulfur interaction and regeneration of CaMn0.775Ti0.125Mg0.1O2.9−δ perovskite as oxygen carrier during combustion of sour gas in a 500 Wth chemical looping combustion unit

  • Cabello Flores, Arturo
  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Obras-Loscertales, Margarita de las
  • Diego Poza, Luis F. de
12 figures, 3 tables., In the present study, the performance of a CaMn0.775Ti0.125Mg0.1O2.9−δ perovskite used as an oxygen carrier to burn sour gas with different H2S concentrations (up to 3000 vppm) in a continuous 500 Wth chemical looping combustion (CLC) prototype was investigated. After 29 h of sour gas combustion, the combustion efficiency had dropped by 18% in comparison with the reference test without sulfur addition. The characterization of the used particles of the perovskite confirmed that the presence of sulfur in the fuel gas had a poisonous effect through the formation of undesired compounds, such as CaSO4. The reactivity with CH4 and oxygen uncoupling capacity decreased, which could explain the decrease in the combustion efficiency. Two regeneration processes, one at high temperature (1273 K) and another one at low temperature (773–873 K), were carried out in a batch fluidized bed reactor to remove the amount of sulfur accumulated in the oxygen carrier particles. The detection of appreciable amounts of gaseous sulfur-based compounds (SO2 and H2S) during the experimentation and the postcharacterization results obtained through different techniques such as X-ray diffraction, ultimate analysis, and thermogravimetric analysis confirmed the effectiveness of both processes. Finally, the feasibility of implementation of the regeneration processes in a commercial CLC unit was thoroughly analyzed., This work was partially supported by the SWINELOOP Project (PID2019-106441RB-I00/AEI/10.13039/501100011033) and the SUCCESS Project, funded by the European Commission under the Seventh Framework Programme (Grant Agreement No. 608571). A. Cabello is also grateful for Grant IJC2019-038908-I funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Valorización de purines porcinos para producción de Syngas/ Hidrógeno con captura de CO2 mediante el proceso de Chemical Looping Gasification

  • Domingos, Yldeney
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
3 figuras.-- Abstract de la comunicación oral de Tecnologías para la generación sostenible de energía presentada en la XVI Reunión del Grupo Español del Carbón (Reunión GEC 2023), celebrada en Gijón del 22 al 25 de octubre de 2023., La conversión termoquímica del estiércol porcino mediante tecnologías de captura de CO2 como Chemical Looping Gasification (CLG) es una opción interesante para la obtención de bioenergía [1] y también para la solución de algunos problemas ambientales relacionados con este residuo. El proceso CLG obtiene gas de síntesis (H2 y CO) por medio de la gasificación y oxidación parcial de un combustible, el cual puede ser utilizado para la producción de biocombustibles, productos químicos o hidrógeno verde. Este proceso utiliza dos reactores interconectados con un transportador de oxígeno (óxido metálico) circulando entre ellos, permitiendo la oxidación parcial del combustible sin contacto directo entre el combustible y el aire. El objetivo de este trabajo es analizar el efecto de las principales variables de operación (temperatura, agente de fluidización y relación oxígeno/combustible) en una unidad CLG de 1.5 kWt sobre la captura de CO2 y la distribución de los alquitranes y de compuestos nitrogenados (N2, NH3, NOx) para la producción de syngas en el proceso CLG., Este trabajo ha sido financiado por el proyecto I+D+i SWINELOOP (PID2019-106441RB-I00). Y. Domingos agradece al MICIN el contrato Pre Doctoral PRE-092769, ambos financiados por MCIN/ AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical looping with oxygen uncoupling of swine manure for energy production with reduction of greenhouse gas emissions

  • Domingos, Yldeney
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
  • Adánez-Rubio, Iñaki
8 figures, 3 tables.-- Under a Creative Commons license BY-NC-ND 4.0., The thermochemical conversion of swine manure using chemical looping processes is an alternative for obtaining bioenergy with CO2 capture and solving environmental problems related to excess nutrients and greenhouse gas emissions. In this study, the combustion of swine manure was performed in a chemical looping with oxygen uncoupling (CLOU) unit at the 0.5 kWth scale with copper-based oxygen carrier particles supported on magnetic MnFe spinel. The effects of the fluidisation agent (CO2 or steam), air excess (7%–23%), and temperature (800–950 °C) on different parameters, namely the CO2 capture rate, combustion efficiency, and nitrogenous compound emissions, were analysed. High combustion efficiencies (95%–98%) were achieved, and tar compounds were not detected in the flue gases. Similarly, elevated CO2 capture efficiency values (82%–99%) were also achieved, which increased by increasing the temperature. Most nitrogen (ca. 93%–96%) is converted into innocuous N2. The NO concentration increased with temperature, whereas N2O and NH3 concentrations decreased., This work was supported by project SWINELOOP, grant PID2019-106441RB-I00 founded by MCIN/AEI/10.13039/501100011033 and the grant 2023AEP041 founded by CSIC. Authors thanks Sumitomo Seika Europe for providing agglomerant for oxygen carrier granulation. Y. Domingos thanks for the grant PRE-092769 Pre-Doctoral fellowship, founded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. Adánez-Rubio acknowledges the “Juan de la Cierva” programme (Grant IJC2019-038987-I funded by MCIN/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Techno-economic analysis of chemical looping processes with biomass resources for energy production and CO2 utilization. Comparison of CLC and CLOU technologies

  • Cabello Flores, Arturo
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Domingos, Yldeney
  • Mendiara, Teresa
9 figures, 12 tables., Bioenergy coupled with carbon capture utilization and storage (BECCUS) is an attractive greenhouse gas mitigation technology that can produce negative CO2 emissions by combining bioenergy resources with the utilization or geological storage of the captured CO2. The main objective of this work was to evaluate the technical and economic feasibility of two BECCUS technologies based on chemical looping concept with two biomass waste as fuels, i.e., swine manure and pine sawdust, for the production of thermal energy and a pure CO2 stream that is subsequently used as raw material in agricultural greenhouses. Direct use of solid biomass resources was considered for the Chemical Looping with Oxygen Uncoupling option, whereas biogas production was the starting point for Chemical Looping Combustion. The profitability of the chemical looping scenarios was assessed through the Levelized Cost of CO2. This parameter was estimated at 218.31 €/t CO2 for the Chemical Looping Combustion scenario, a value much higher than those for the Chemical Looping with Oxygen Uncoupling scenarios (73.04–87.32 €/t CO2) due to the limited conversion degree of the carbon present in the fuel waste to biogas and the need for an additional experimental plant to the Chemical Looping Combustion unit, i.e., the biogas production plant. Comparing the Chemical Looping with Oxygen Uncoupling scenarios, the economic analysis revealed that the profitability of the biomass-fueled chemical looping facility was markedly sensitive to the selling price of the biomass resource. Furthermore, the values of the Levelized Cost of CO2 parameter for the Chemical Looping with Oxygen Uncoupling scenarios were lower than those estimated in other research studies that implemented BECCUS technologies and utilized the captured CO2 for identical purposes. In the particular case of swine manure, this result becomes even more noteworthy since it demonstrates that the energy use of this biomass resource through Chemical Looping with Oxygen Uncoupling technology is an economically profitable and environmentally sustainable solution to the difficult challenge of managing this livestock waste. Therefore, it can be concluded that Chemical Looping with Oxygen Uncoupling processes fed with biomass are a very attractive BECCUS technology for heat generation where, in addition, the pure CO2 stream obtained at the outlet of the fuel reactor can be considered a marketable, high value-added product., This work was supported by Grant PDC2021-121190-I00 MCIN/AEI/10.13039/501100011033 and the SWINELOOP (PID2019-106441RBI00/AEI/10.13039/501100011033) project. A. Cabello is also grateful for Grant IJC2019-038908-I funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of biomass torrefaction on the syngas quality produced by Chemical Looping Gasification at 20 kWth scale

  • Condori, Óscar
  • Abad Secades, Alberto
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • Funcia, Ibai
  • Pérez-Vega, Raúl
  • Adánez Elorza, Juan
  • García Labiano, Francisco
9 figures, 5 tables.-- Pusblished as part of virtual special issue “2024 Pioneers in Energy Research: Juan Adanez”., The innovative Biomass Chemical Looping Gasification (BCLG) process uses two reactors (fuel and air reactors) to generate nitrogen-free syngas with low tar content under autothermal conditions. A solid oxygen carrier supplies the oxygen for partial oxidation of the fuel. This study investigated the BCLG process, conducted over 25 h of continuous operation at 20 kWth scale, using ilmenite as the oxygen carrier and wheat straw pellets as fuel (WSP). The effect of using torrefied wheat straw pellets (T-WSP) on the syngas quality was assessed. In addition, the impact of several operational variables on the overall process performance and syngas yield was analyzed. The primary factors influencing the syngas yield were the char conversion through gasification and the oxygen-to-fuel ratio. Higher temperatures, extended residence times of solids in the fuel reactor, and using a secondary gasifier led to increased char conversion, enhancing H2 and CO production. Optimizing the air reactor design could enhance the CO2 capture potential by inhibiting the combustion of bypassed char. While char conversion and syngas yield with T-WSP were lower than those with WSP at temperatures below 900 °C, T-WSP achieved a higher syngas yield under conditions favoring high char conversion. The presence of CH4 and light hydrocarbons showed minimal sensitivity to operating conditions variation, limiting the theoretical syngas yield. Overall, the CLG unit operated smoothly without any agglomeration issues., This study was conducted as part of the European Union’s Horizon 2020─Research and Innovation Framework Programme under grant agreement no. 817841 (Chemical Looping Gasification for Sustainable Production of Biofuels─CLARA) and grant PID2019-106441RB-I00 founded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical looping combustion and gasification of swine manure with a Cu-Based oxygen carrier

  • Domingos, Yldeney
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Izquierdo Pantoja, María Teresa
  • Cabello Flores, Arturo
12 figures, 6 tables., The thermochemical conversion of swine manure by using Chemical Looping Combustion (CLC) and Chemical Looping Gasification (CLG) is an interesting option to obtain bioenergy and solve some environmental issues related to this waste. In this work, experimental tests using swine manure as fuel and a Cu-based oxygen carrier (14 wt% CuO) in a 0.5kWth continuous unit have been performed. For CLC conditions, the effects of the temperature (800–900 °C) and the fluidization agent (CO2 or steam) on the combustion and CO2 capture efficiencies were evaluated. In general, high combustion (97–99 %) and CO2 capture (87–99 %) efficiencies were achieved, which improved by increasing the operating temperature. For CLG conditions, the effect of the oxygen-to-fuel ratio (λ = 0.2, 0.3 and 0.4) on the gas product distribution, CO2 capture efficiency and tar composition was studied using steam and CO2 as fluidizing agents at 900 °C. The CO2 capture potential improved by increasing the oxygen-to-fuel ratio. Regarding the tar distribution, naphthalene was the main product followed by benzene, acenaphthylene, indene and phenanthrene. Additionally, for both processes, CLC and CLG, the distribution of nitrogenous compound emissions (N2, NH3, N2O, NO2 and NO) was analyzed. It was observed that the N-swine manure was mainly converted into inert N2., This work was supported by project SWINELOOP, grant PID2019-106441RB-I00 funded by MCIN/AEI/10.13039/501100011033. This work was supported by Grant PDC2021-121190-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR“. Y. Domingos thanks for the grant PRE-092769 Pre-Doctoral fellowship, funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interaction of swine manure ash-oxygen carrier particles under chemical looping conditions

  • Adánez-Rubio, Iñaki
  • Abad Secades, Alberto
  • Leion, Henrik
  • Mattisson, Tobias
  • Adánez Elorza, Juan
12 figures, 3 tables., The interaction between biofuel ashes and the oxygen carrier in chemical looping combustion (CLC) and chemical looping with oxygen uncoupling (CLOU) processes will be a key factor for the future implementation of these processes on an industrial scale. This is important if the biofuel used is a waste product with a high ash content, as much as 30 wt %, as is dry swine manure. The main components of swine manure ash are Ca (17 wt %) and P (13 wt %). The present work studies the interactions between three different oxygen carriers, two synthetic magnetic Cu-based CLOU oxygen carriers (Cu30MnFekao7.5 and Cu30MnFe_Mag) and ilmenite, and swine manure ash. CLOU and CLC cycles were performed in a batch fluidized-bed reactor under harsh conditions using up to 33.3 wt % ash. For both CLOU oxygen carriers, the concentration of O2 released depended on rates of carrier conversion, although no agglomeration problems were found after 20 h of CLOU and CLC redox cycles with 25 wt % ash, and their CLOU reactivities also increased. However, the ilmenite sustained hard agglomeration after 20 h of CLC cycles with 25 wt % ash. After 20 h of CLC/CLOU redox cycles at 900 °C, all of the oxygen carriers showed ash particles adhering to their surface, with a higher degree of ash cover on Cu30MnFekao7.5 and ilmenite, both with minerals in their composition. Therefore, the presence of minerals in the oxygen carrier, either as a support or in the form of impurities (mainly Si and Al as kaolinite), could be related to a greater interaction with the ashes. Interaction with some ash elements resulted in ilmenite agglomeration, and the diffusion of K inside Cu30MnFekao7.5 particles was observed by using scanning electron microscopy coupled with energy dispersive X-ray (SEM-EDX), particularly on the kaolin-rich areas inside the oxygen carrier., This work was supported by the SWINELOOP project, Grant PID2019-106441RB-I00 funded by MICIN/AEI/10.13039/501100011033. I. Adánez-Rubio acknowledges the “Juan de la Cierva” Program (Grant IJC2019-038987-I funded by MCIN/AEI/10.13039/501100011033) and the Ramón y Cajal Program (Grant RYC2022-035841-I funded by MCIU/AEI/10.13039/501100011033 and FSE+). The work was also supported by Chalmers Energy Area of Advance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Energy valorization of swine manure by oxygen carrier aided combustion (Ocac) with oxygen carriers based on natural ores

  • Domingos, Yldeney
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
Abstract of the work presented at the 32nd European Biomass Conference and Exhibition 2024: 24-27 June 2024, Marseille, France: Setting the course for a biobased economy.-- Session reference: 4CV.3.7, The primary environmental impacts of swine manure, in both solid and liquid fractions, fundamentally arise from two sources: greenhouse gas emissions (GHGs) and the excessive accumulation of nutrients in the field. Therefore, the search for a suitable solution to this problem is of great importance. The energy valorization of the solid fraction of swine manure is an option with the potential to mitigate the environmental concerns associated with this residue. Among the new technologies for turning these wastes into energy, oxygen carrier aided combustion may be a promising alternative. In this work, experimental tests using swine manure as fuel in a 3kWth unit with different types of oxygen carrier have been performed. The employed oxygen carriers included a hematite mineral, a manganese ore and Ilmenite. The effects of temperature (800-900 ºC) and oxygen excess in the reactor (1-3vol% of O2) on the combustion efficiency and the nitrogenous compound emissions (N2, NH3, NOx) were analyzed. In general, high combustion efficiencies (87-98%) were reached an most nitrogen was converted into NO and N2., This work was supported by the HYSERLOOP project, Grant PID2022-138085OB-I00 funded by MICIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and project SWINELOOP, grant PID2019-106441RB-I00 founded by MCIN/AEI/10.13039/501100011033. Yldeney Domingos thanks to grant PRE-092769 funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Syngas production from liquid and solid fractions of swine manure in a 0.5 kWth chemical looping gasification unit

  • Domingos, Yldeney
  • Obras-Loscertales, Margarita de las
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
7 figures, 4 tables., Swine manure, a heterogeneous livestock waste composed of solid and liquid excreta, can be sustainably converted through Chemical Looping Gasification (CLG) to produce syngas and bioenergy. Integrated with CO2 capture, the process enables high-purity hydrogen generation and offers a potential route toward net-negative carbon emissions. The experimental campaign was conducted at 900 °C in a continuously operated 0.5 kWth CLG unit consisting of two interconnected fluidized bed reactors (fuel and air). Ilmenite was employed as the oxygen carrier to provide the oxygen required for gasification. This study focuses on the gasification of raw swine manure, comprising both solid and liquid fractions. The solid fraction was introduced via a screw feeder, while the liquid fraction was simulated by injecting an ammonia–water solution as gasifying agents (water or ammonia + water). The effect of the liquid fraction on syngas composition, carbon conversion, and nitrogen species (N2, NH3, N2O, NO2, and NO) was evaluated at ammonia concentrations typical of swine manure (800–5600 mg/L). Results showed an average syngas composition for solid and liquid fraction feeding of ~31% CO2, 20% CO, 41% H2, 7% CH4, and 0.5% C2 hydrocarbons, with 91–96% carbon conversion. Benzene and naphthalene dominated the tar compounds. CO2 capture potential reached 60%, with nitrogen mainly converted to N2., This research was funded by the AGENCIA ESTATAL DE INVESTIGACIÓN, grant number PID2019-106441RB-I00 (SWINELOOP project) funded by MCIN/AEI/10.13039/501100011033., Yldeney Domingos thanks the grant PRE-092769 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in Your Future., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The effect of using swine manure as fuel on CuO/Al2O3 oxygen carrier during chemical looping combustion and gasification operation

  • Domingos, Yldeney
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Izquierdo Pantoja, María Teresa
  • Cabello Flores, Arturo
  • Gayán Sanz, Pilar
14 figures, 5 tables., Chemical Looping (CL) technologies emerge as promising candidates for the thermochemical conversion of organic wastes due to its high operation versatility and inherent CO2 capture. In CL processes, the oxygen carrier performance is a key aspect, which may be affected by its interaction with ash from the fuel. This work evaluates the evolution of the physico-chemical properties of a CuO/Al2O3 oxygen carrier after being tested for 45 h in a 0.5 kWth unit in both combustion (CLC) and gasification (CLG) modes when feeding swine manure as fuel, which has a high ash content. Minor loss of copper was observed, as well as the oxygen carrier’s reactivity was maintained. In addition, no presence of agglomeration was detected. However, the presence of ash-derived elements inside and outside the oxygen carrier particles contributed to reduce the material’s lifetime and promoted the support degradation. This type of degradation was not previously reported with other fuels, as the CuO/Al2O3 material showed a high stability in different chemical looping processes with methane, syngas, or woody biomass. Therefore, the significant influence of swine manure ash composition on oxygen carrier durability was highlighted, raising the question of whether prolonged operation with other fuels with lower ash content could generate this type of problem. Eventually, the use of an alternative support to Al2O3 was suggested., This work was supported by project SWINELOOP, grant PID2019-106441RB-I00 founded by MCIN/AEI/10.13039/501100011033. Y. Domingos thanks for the grant PRE-092769 Pre-Doctoral fellowship, founded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed