Skip to main content

ESTRUCTURACION DE MATERIALES AVANZADOS MEDIANTE LASERES ULTRARRAPIDOS PARA APLICACIONES EN FOTONICA, SENSADO Y BIO-ACTUACION: SINTESIS, MODIFICACION Y APLICACIONES

PID2020-112770RB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tribochemically driven dehydrogenation of undoped sodium alanate under room temperature

  • Muñoz-Cortés, Esmeralda
  • Ibryaeva, Olga
  • Manso Silván, Miguel
  • Zabala, Borja
  • Flores, Eduardo
  • Gutiérrez, Almudena
  • Ares, José R.
  • Nevshupa, Roman
n application of mechanical energy was explored as a new non-thermal method to drive H2 emission from undoped sodium alanate at room temperature. It was found that mild rubbing of NaAlH4 pellets under vacuum led to intensive and almost instantaneous gas emission. The dominating species in the emitted gases was H2 (>99%). Traces of mono- and polyalanes, NaAlH4 vapours, CO2 and other non-identified gases were registered. H2 emission involved several first-order processes, whose characteristic time constants ranged widely from 0.6 to 465 s. None of the dehydrogenation reactions could be connected to either the thermal effect of friction or the direct coupling of mechanical forces to the energy landscape of chemical reactions. In turn, it was suggested that the tribochemical reactions can be triggered by plastic deformation and shearing. A linked diffusion-wear model of NaAlH4 triboinduced dehydrogenation, which consistently explains all empirical findings, was put forward., This work was financially supported by the Ministry of Science and Innovation of Spain (grants PID2019-111063RB-I00, PID2020-112770RB-C22 and RTI2018-099794-B-I00) and the Basque Government via the EMAITEK Plus 2020 programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface characterization of alkane viral anchoring films prepared by titanate-assisted organosilanization

  • Sanz Calderón, Aida
  • Cantero, Miguel
  • Pérez, Uxia
  • Ortega-González, Paula
  • Martin, Carmen
  • Pablo, Pedro J. de
  • Manso Silván, Miguel
  • Hernando-Pérez, Mercedes
8 pags., 5 figs., Studies of virus adsorption on surfaces with optimized properties have attracted a lot of interest, mainly due to the influence of the surface in the retention, orientation and stability of the viral capsids. Besides, viruses in whole or in parts can be used as cages or vectors in different areas, such as biomedicine and materials science. A key requirement for virus nanocage application is their physical properties, i.e. their mechanical response and the distribution of surface charge, which determine virus-substrate interactions and stability. In the present work we show two examples of viruses exhibiting strong surface interactions on homogeneous hydrophobic surfaces. The surfaces were prepared by titanate assisted organosilanization, a sol-gel spin coating process, followed by a mild annealing step. We show by surface and interface spectroscopies that the process allows trapping triethoxy-octylsilane (OCTS) molecules, exhibiting a hydrophobic alkane rich surface finishing. Furthermore, the surfaces remain flat and behave as more efficient sorptive surfaces for virus particles than mica or graphite (HOPG). Also, we determine by atomic force microscopy (AFM) the mechanical properties of two types of viruses (human adenovirus and reovirus) and compare the results obtained on the OCTS functionalized surfaces with those obtained on mica and HOPG. Finally, the TIPT+OCTS surfaces were validated as platforms for the morphological and mechanical characterization of virus particles by using adenovirus as initial model and using HOPG and mica as standard control surfaces. Then, the same characteristics were determined on reovirus using TIPT+OCTS and HOPG, as an original contribution to the catalogue of physical properties of viral particles., This work was supported by the grant Ayudas a Proyectos de I+D para Jóvenes Doctores de la Universidad Autónoma de Madrid 2021 (SI3/PJI/2021–00216) supported by Comunidad de Madrid and Universidad Autónoma de Madrid to M.H-P. Also, M.H-P acknowledges funding from the Spanish Ministry of Science and Innovation (TED2021–129937B-I00). Grant PID2019–104098GB-I00/AEI/10.13039/501100011033, co-funded by the Spanish State Research Agency and the European Regional Development Fund to C.S.M. The CNB-CSIC was further supported by a Spanish State Research Agency Severo Ochoa Excellence grant (SEV 2017–0712). C.S.M is a member of the CSIC funded consortium LifeHub (CSIC grant number: 202120E47). REACT-EU funding by Comunidad Autónoma de Madrid is also acknowledged. M.M.S acknowledges funding from MCIN/AEI /10.13039/501100011033 (PID2020–112770RB-C22). P.J.P acknowledges projects FIS2017–89549-R; and FIS2017–90701-REDT. P.J.P also acknowledges the Human Frontiers Science Program (HFSPO RGP0012/2018)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Process design for the manufacturing of soft X-ray gratings in single-crystal diamond by high-energy heavy-ion irradiation

  • García, G.
  • Martin, M
  • Ynsa, M. D.
  • Torres-Costa, Vicente
  • Crespillo, M.L.
  • Tardío, M.
  • Olivares Villegas, José
  • Bosia, F
  • Peña-Rodríguez, O.
  • Nicolás, José
  • Tallarida, Massimo
Artículo con 9 figuras, This paper describes in detail a novel manufacturing process for optical gratings suitable for use in the UV and soft X-ray regimes in a single-crystal diamond substrate based on highly focused swift heavy-ion irradiation. This type of grating is extensively used in light source facilities such as synchrotrons or free electron lasers, with ever-increasing demands in terms of thermal loads, depending on beamline operational parameters and architecture. The process proposed in this paper may be a future alternative to current manufacturing techniques, providing the advantage of being applicable to single-crystal diamond substrates, with their unique properties in terms of heat conductivity and radiation hardness. The paper summarizes the physical principle used for the grating patterns produced by swift heavy-ion irradiation and provides full details for the manufacturing process for a specific grating configuration, inspired in one of the beamlines at the ALBA synchrotron light source, while stressing the most challenging points for a potential implementation. Preliminary proof-of-concept experimental results are presented, showing the practical implementation of the methodology proposed herein., The authors acknowledge funding support by the following projects: PID2020-112770RB-C22 from the Spanish Ministry of Science and Innovation, TechnoFusión (III)-CM (S2018/EMT-4437) from Comunidad de Madrid (cofinanced by ERDF and ESF), agreement between Community of Madrid and Universidad Autónoma de Madrid (item “Excellence of University Professorate”). M.L.C. acknowledges financial support from the research project “Captacion de Talento UAM” Ref: #541D300 supervised by the Vice-Chancellor of Research of Universidad Autónoma de Madrid (UAM). LOREA beamline at ALBA is a project co-funded by the European Regional Development Fund (ERDF) within the Framework of the Smart Growth Operative Programme 2014-2020. The authors acknowledge the support from The Centro de Microanálisis de Materiales (CMAM)—Universidad Autónoma de Madrid, for the beam time proposal (demonstration of a grating profile for soft X-rays in diamond via ion lithography) with code IuB-005/21, and its technical staff for their contribution to the operation of the accelerator. We also acknowledge P. Olivero for very useful comments on the manuscript draft
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antibacterial Films of Silver Nanoparticles Embedded into Carboxymethylcellulose/Chitosan Multilayers on Nanoporous Silicon: A Layer-by-Layer Assembly Approach Comparing Dip and Spin Coating

  • Naveas, Nelson
  • Pulido, Ruth
  • Torres-Costa, Vicente
  • Agulló Rueda, F.
  • Santibáñez, Mauricio
  • Malano, Francisco
  • Recio-Sánchez, Gonzalo
  • Garrido-Miranda, Karla A.
  • Manso-Silván, Miguel
  • Hernández-Montelongo, Jacobo
The design and engineering of antibacterial materials are key for preventing bacterial adherence and proliferation in biomedical and household instruments. Silver nanoparticles (AgNPs) and chitosan (CHI) are broad-spectrum antibacterial materials with different properties whose combined application is currently under optimization. This study proposes the formation of antibacterial films with AgNPs embedded in carboxymethylcellulose/chitosan multilayers by the layer-by-layer (LbL) method. The films were deposited onto nanoporous silicon (nPSi), an ideal platform for bioengineering applications due to its biocompatibility, biodegradability, and bioresorbability. We focused on two alternative multilayer deposition processes: cyclic dip coating (CDC) and cyclic spin coating (CSC). The physicochemical properties of the films were the subject of microscopic, microstructural, and surface–interface analyses. The antibacterial activity of each film was investigated against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria strains as model microorganisms. According to the findings, the CDC technique produced multilayer films with higher antibacterial activity for both bacteria compared to the CSC method. Bacteria adhesion inhibition was observed from only three cycles. The developed AgNPs–multilayer composite film offers advantageous antibacterial properties for biomedical applications., his work was financially supported by Fondo Nacional de Desarrollo Científico Tecnológico FONDECYT—Chile (grant number 11180395), CONICYT PFCHA/DOCTORADO/2017-21172001 (Nelson Naveas), PFCHA/DOCTORADO/2015-21151648 (Ruth Pulido), and Vicerrectoría de Investigación y Doctorados de la Universidad San Sebastian—VRIDPuente21/03 project. The work was partially funded by project USAMPSA PID2020-112770RB-C22 from Ministerio de Ciencia e Innovación de España., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Operando exploration of tribochemical decomposition of FeS2 thin films and mineral iron pyrite

  • Muñoz-Cortés, Esmeralda
  • Sánchez-Prieto, Jesús
  • Zabala, Borja
  • Sánchez, Carlos
  • Flores, Eduardo
  • Flores, Araceli
  • Román García, Elisa Leonor
  • Ares, José R.
  • Nevshupa, Roman
Tribochemical decomposition of thin-film synthetic iron disulfide and mineral iron pyrite was studied using a combination of operando mass-spectrometry coupled to ultrahigh vacuum tribochemical cell and these gas expansion system. The composition and kinetics of gas emission were analyzed using an original methodology. It was found that carbon-containing gases were dominating. The sulfur-containing gases comprised H2S, COS and CS2. The latter two were unexpected. The emission of the gases was traced back to solid-state chemical reactions kinetically controlled by the precursor concentrations and driven through non-thermal mechanisms, which we tentatively assigned to formation of sulfur radicals., This work was supported by the Ministry of Science, Innovation and University of Spain (grants PID2019- 111063RB-I00, PID2020-112770RB-C22, PID2020-117573GB-I00, RTI2018-099794-B-I00, and TED2021-129950B-I00). We acknowledge the service from the MiNa Laboratory at IMN and funding from Madrid Community (project S2018/NMT-4291 TEC2SPACE), Ministry of Science, Innovation and Universities of Spain (project CSIC13-4E-1794), and EU (FEDER, FSE) The authors acknowledge the support from The Centre for Micro Analysis of Materials (CMAM)—Universidad Autónoma de Madrid, for the beam time proposal (Analysis of surface elemental transformations induced by mechanochemical reactions with metal sulfides) with code STD-022/23, and its technical staff for their contribution to the operation of the accelerator., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Femtosecond laser thinning for resistivity control of tungsten ditelluride thin-films synthesized from sol-gel deposited tungsten oxide

  • Fernández García, A.
  • García-Lechuga, Mario
  • Agulló Rueda, F.
  • Rubio-Zuazo, Juan
  • Manso Silvan, M.
8 pags., 7 figs., In this work we present a route for fabricating WTe thin-films together with femtosecond laser post processing, enabling to finely control the conductivity. First, we produce amorphous films of WO on Si by spin-coating a sol-gel precursor followed by a consolidating annealing and a reduction process in partial H atmosphere, leading to porous metallic tungsten cluster layers. To achieve WTe, the films were exposed to the chalcogen vapours by isothermal closed space vapor transport. The formation of a tungsten ditelluride film composed of piled crystals could be confirmed and a gradient of surface rich Te identified through hard X-ray photoelectron spectroscopy. Finally, it is demonstrated that resistivity can be changed from 0.2 mΩ.m to 1 mΩ.m, while keeping the material characteristics. An anisotropic conductivity can be induced by direct selective thinning with fs laser writing (350 fs pulse duration, 515 nm laser wavelength) of 1D stripes. The obtained results, demonstrate that laser processing is a promising thin-film post-processing technique that can be applied to 2D transition metal dichalcogenide thin films., The current research was funded through grants PID2020–112770RB-C21 and PID2020–112770RB-C22 by MCIN/AEI/10.13039/501100011033. We acknowledge the Spanish MCIN and CSIC for provision of synchrotron radiation at the Spanish line at the ESRF trough project 25–02–972. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13–4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Out-of-plane preferential growth of 2D molybdenum diselenide nanosheets on laser-induced periodic surface structures

  • Fernández García, A.
  • Ariza, Rocío
  • Solís Céspedes, Javier
  • Agulló Rueda, F.
  • Manso Silvan, M.
  • García-Lechuga, Mario
7 pags., 5 figs., In this study, we explore the morphology and orientation of molybdenum diselenide, a Van der Waals 2D material, through isothermal closed space vapor deposition on both pristine and laser-structured substrates. Laser structuring is conducted on dielectric (sapphire), semiconductor (silicon), and conductive (titanium nitride) substrates using ultrashort laser pulses, resulting in smooth topographic changes such as laser-induced periodic surface structures (LIPSS) or selective ablation. Scanning electron microscopy (SEM) reveals the pivotal role of surface structuring in the growth of out-of-plane MoSe nanosheets. This effect is particularly pronounced on monocrystalline substrates like sapphire and silicon, exhibiting in-plane growth on pristine substrates. Additionally, Raman spectroscopy confirms the vertical orientation of flakes on structured substrates and highlights the presence of active edge sites by demonstrating an increased abundance of deposited material. Overall, our findings emphasize the controllability of directing the growth of MoSe flakes through appropriate pre-treatment of the substrate, with potential applications in various fields, including Surface-Enhanced Raman Scattering (SERS). Furthermore, the scalability, reproducibility, and applicability to any substrate make ultrashort laser structuration a promising general strategy for orienting 2D materials., The current research was funded through grants PID2020-112770RB-C21 and PID2020-112770RB-C22 funded by MCIN/AEI/10.13039/501100011033. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). The initial part of the research leading to these results has received funding from LASERLAB-EUROPE (grant agreement no. 871124, European Union’s Horizon 2020 research and innovation programme. Grant project CNRS‐LP3002707).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optoplasmonic tuneable response by femtosecond laser irradiation of glass with deep-implanted gold nanoparticles

  • Solana-Ramírez, Irene
  • Ynsa, María Dolores
  • Cabello, Fátima
  • Chacón, Fernando
  • Siegel, Jan
  • García-Lechuga, Mario
8 pages, 5 figures, The manipulation of the optical properties of plasmonic nanocomposites is of high interest for the development of advanced optical devices with tailored unique properties. Achieving these objectives requires a combination of synthesis techniques and post-fabrication strategies. Here, we combine the use of two well-established physical strategies: MeV ion implantation and femtosecond laser processing. Firstly, we synthesize Au-doped soda lime glass nanocomposite through ion beam implantation (Au2+ at 1.8 MeV) followed by thermal annealing. This synthesis procedure results in a peculiar optical response based on the combination of Au-nanoparticle plasmonic resonance and a Fabry-Perot interference, caused by the deep implantation (centered at 480 nm). Secondly, this dual response is demonstrated to be highly tuneable by non-resonant femtosecond laser irradiation (800-nm wavelength and 130-fs pulse duration). Depending on the laser fluence, three transformation regimes are distinguished: supressing the interferometric response by spallative ablation, inducing vivid blue colors by surface swelling, and producing red-shifted color changes by multi-shot irradiation at low fluences. The proposed method is very versatile, since it is applicable to any dielectric matrix or implanted element. This work paves the way to a new route for the development of scalable and tuneable nanocomposites with several potential applications in optics., The current research was funded through grants ULS_PSB(PID2020112770RB-C21 and PID2020-112770RB-C22) funded by MCIN/AEI/ 10.13039/501100011033 and ASSESS (TED2021-129666B-C22) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. Authors acknowledge the support from CMAM-UAM for the beam time (STD045/22, STD009/23, STD024/23 and STD025/23) and its technical staff support, in particular to Jesús S´anchez Prieto. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node "Laboratorio de Microscopías Avanzadas" at the University of Zaragoza. I. S. acknowledges for their support and help in RBS analysis to Jose Gonzalo de los Reyes (IO, CSIC) and Gaston García Lopez (CMAM-UAM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Iodine-substituted hydroxyapatite nanoparticles and activation of derived ceramics for range verification in proton therapy

  • Magro Hernández, R.
  • Muñoz-Noval, A.
  • Briz, José Antonio
  • Murias, J. R.
  • Espinosa-Rodríguez, A.
  • Fraile, Luis M.
  • Agulló Rueda, F.
  • Ynsa, M. D.
  • Tavares de Sousa, C.
  • Cortés-Llanos, B.
  • García-López, G.
  • Nácher, Enrique
  • García Tavora, Vicente
  • Mont I Geli, N.
  • Nerio, A.N.
  • Onecha, V. V.
  • Pallàs, M.
  • Tarifeño, A.
  • Tengblad, Olof
  • Manso Silván, M.
  • Viñals, S.
8 pages, 7 figures, 2 tables, Osteosarcoma is a radioresistant cancer, and proton therapy is a promising radiation alternative for treating cancer with the advantage of a high dose concentration in the tumor area. In this work, we propose the use of iodine-substituted hydroxyapatite (IHAP) nanomaterials to use iodine (127I) as a proton radiation tracer, providing access to range verification studies in mineralized tissues. For this purpose, the nanomaterials were synthesized at four iodine concentrations via hydrothermal synthesis. The materials were characterized via different microstructural techniques to identify an optimal high iodine concentration and pure apatite phase nanomaterial. Finally, such pure IHAP powders were shaped and irradiated with proton beams of 6 and 10 MeV, and their activation was demonstrated through subsequent decay analysis. The materials could be integrated into phantom structures for the verification of doses and ranges of protons prior to animal testing and clinical proton therapy treatments of tumors located deep under combined soft and calcified tissues., The current research was funded through grants PID2020-112770RB-C21, PDC2022-133382-I00, PID2020-112770RB-C22 and PID2023-151371OB-C22 by MCIN/AEI/10.13039/501100011033 and FEDER, EU, grant FLASHOnChip (PLEC2022-009256) by MCIN, ASAP-CM(P2022/BMD-7434) from DGI-Comunidad de Madrid and CIPROM/2021/064 from Generalitat Valenciana. Beamtime at the CMAM through experiment EUB004/22 is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ ion luminescence characterization of defects produced in diamond by 6 MeV carbon ion irradiation

  • Jia, Gangyuan
  • Valls-Vicent, Francesc
  • Padhi, Santanu Kumar
  • Enríquez-Pérez, Esther
  • García, Gastón
  • Zhang, Yufei
  • Olivares Villegas, José
  • Wang, Kaiyue
7 pages, 8 figures, 2 tables, The present work is focused on the in-situ characterization of defects in single-crystal diamond induced by 6 MeV carbon ion beam irradiation using ionoluminescence (IL) spectroscopy. The main purpose was to study the optical properties of several defects following the IL evolution and characterize the damage degree using Raman spectra. Three emissions were recorded by IL spectra, located at 430, 504, 575.5 nm with ion fluence in the range of 0∼7 × 1014 cm−2, and were attributed to the A-band, 3H, and NV0 centers, respectively. The 3H centers exhibited a non-monotonic behavior with respect to fluence, with a rapid initial increase followed by a gradual decay. Based on a double exponential model, the data had been well-fitted, and the value of fluence at half of the initial luminescence (F1/2) was found to be notably high (of order 1014 cm−2). A simple Birks-Black model was applied to fit the evolution of the A-band and NV0 centers, and luminescence decays were observed with F1/2 values of (7.9 ± 2.2) × 1011 and (1.2 ± 0.6) × 1012 cm−2, respectively. At the initial stage of irradiation, the intensity decay of A-band and NV0 centers is accompanied by an increase of 3H centers, suggesting that there is a conversion between the defect types., This work was supported by China Scholarship Council (CSC, File No. 202308140156), National Natural Science Foundation of China (Grant No. U21A2073, 62304175), Shanxi Province Natural Science Foundation (Grant Nos. 202203021222207, 202203021211210, 202103021224268), the Taiyuan University of Science and Technology Research Initiation Fund Project (Grant Nos. 20222065, 20222005), the European Union as part of the Horizon Europe call HORIZON-INFRA- 2021-SERV-01 (Grant No. 101058414), co-funded by UK UKRI (Grant No. 10039728), the Swiss State Secretariat for Education, Research and Innovation (SERI) (Grant No. 22.00187), the Spanish Ministry of Science and Innovation (MICINN) (Grant No. PID2022-142417OB-I00 and PID2020-112770RB-C22), and the Madrid Regional Government through the TechnoFusion (III)-CM program (Grant No. S2018/EMT- 4437). The authors acknowledge the support from The Centro de Microanalisis de Materiales (CMAM) - Universidad Autonoma de Madrid, for the beam time proposals IMP- 006/24, and its technical staff for their contribution to the operation of the accelerator., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silicon amorphization responses by combined irradiations with MeV ion beams and ultrashort laser pulses

  • Solana-Ramírez, Irene
  • Ynsa, M. Dolores
  • Agulló-Rueda, Fernando
  • Sánchez-Prieto, Jesús
  • Grojo, David
  • Siegel, Jan
  • García-Lechuga, Mario
7 pages, 4 figures, This work demonstrates a significant synergistic effect between MeV ion implantation and femtosecond laser irradiation in silicon amorphization. The achievable amorphization depth and the range of laser fluencies leading to amorphization is increased for implanted samples in comparison to pristine silicon. In Si(100) samples, prior to femtosecond laser irradiation (800 nm and 120 fs, or 1030 nm and 180 fs) ion-induced defects are produced with protons (0.6, 1 and 2 MeV) or Si-ions (2 MeV) at varying ion-irradiation fluences. Then, the investigated defects densities before laser irradiation range from low levels to levels approaching ion-induced amorphization (defects per atom, dpa, from 10<sup>–9</sup> to 0.1). The optimal pre-conditioning for subsequent femtosecond laser-induced amorphization is found at a moderate defect density level, dpa =10<sup>–5</sup>. Additionally, it is shown that the achievable spatial resolution of the synergistic material amorphization is determined by the high resolution of the focused ion irradiation, suggesting a potential pathway for high-resolution patterning based on laser-assisted techniques. However, at high defect densities (dpa ≈ 0.1), the synergistic effect diminishes, and femtosecond laser irradiation instead reduces disorder, indicating a defect-annealing effect rather than further amorphization., This work is part of the projects ULS_PSB (grants PID2020–112770RB-C21 and PID2020–112770RB-C22), HyperSpec (grant PID2023–148178OB-C22) funded by MCIN/AEI/10.13039/501100011033 and HyperSolar (grant TED2021–130894B-C22) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. It was partially funded by the CSIC through the call for internationalization i-LINK 2022 (project ILINK22056) and by the French National Research Agency (grant ANR-23-CE08–0029–03). Authors acknowledge the support from CMAM-UAM for the beam time (STD002/22, STD015/22, and STD024/23) and its technical staff support. Part of the work was conducted using LaMP facilities at LP3. I.S. acknowledges the support by the Spanish Ministry of Science, Innovation and Universities vía a doctoral grant (FPU23/01300)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring tribochemical transduction pathways for dehydrogenation of molecular hydrides

  • Muñoz-Cortés, Esmeralda
  • Leardini, Fabrice
  • Conte, Marcello
  • Flores, Eduardo
  • Nevshupa, Roman
  • Ares, Jose Ramón
  • Campo, Ángel Adolfo del
Recent research has shown that mechanical energy can trigger dehydrogenation (hydrogen release) from metal and complex hydrides at room temperature, offering an alternative to traditional heat-based methods. This study investigates whether the tribochemical approach can also be effective to release hydrogen from molecular hydrides such as ethane 1,2-diamineborane (EDAB). Surprisingly, despite dehydrogenating at a lower temperature than metal and complex hydrides, EDAB exhibited faint hydrogen release under mechanical stress. To understand this behavior, the tribochemical decomposition pathways of EDAB were investigated using operando Mechanically Stimulated Gas Emission Mass Spectrometry in combination with other surface and material characterization techniques. The lack of hydrogen emission from EDAB is attributed to a combination of strong intramolecular bonds (covalent and dative bonds) within the molecule, and weak intermolecular interactions (hydrogen bonds and van der Waals forces) between EDAB molecules., Authors thank to J. F. Fern\u00E1ndez and M. Manso Silvan from UAM for valuable discussion. The technical assistance of S. Guerra is also acknowledged. This work was supported by the Ministry of Science and Innovation of Spain (grants PID2019-111063RB-I00, PID2020-112770RB-C22, PID2020-117573GB-I00, RTI2018-099794-B-I00, and TED2021-129950B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water partial pressure X-ray photoelectron spectroscopy study of the conformation of fibrinogen on silanized hydrophilic/hydrophobic surfaces

  • Fernández-Alonso, Francisco Javier
  • Calvo, Rodrigo
  • Sanz Calderón, Aida
  • Villar-García, Ignacio J.
  • Saiz, Fernan
  • Hernando-Pérez, Mercedes
  • Pérez Dieste, Virginia
  • Manso Silván, Miguel
Near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) allows the study of the conformational state of adsorbed proteins on surfaces at water partial pressures of a few mbar. In the present study, we used two organosilanes to prepare hydrophilic and hydrophobic surfaces. For the NAP-XPS study, human fibrinogen, a sorbent serum protein with conformational dependent function, was adsorbed on contrasting surfaces, studied at 2 mbar H<inf>2</inf>O vapor pressure and compared with analysis at ultrahigh vacuum (UHV). Two different excitation energies were used to gain in-depth sensitivity. The C 1 s core level was fitted, and the components correlated with the presence of surface-exposed hydrophobic or hydrophilic moieties. The mode of analysis significantly affects the data on the conformation of fibrinogen on hydrophilic surfaces, showing surface-exposed (more intense) hydrophobic cues in the H<inf>2</inf>O NAP mode than in the UHV mode. Furthermore, the intensity of the C[sbnd]H peak exhibits the greatest variability in intensity, being more surface segregated on hydrophilic surfaces than on hydrophobic ones. The latter statement is sustained only for H<inf>2</inf>O NAP conditions, with no significant differences observed in the UHV mode. The work envisages greater sensitivity for forthcoming analyses of adsorbed proteins and other biomolecules by using water partial pressure XPS mode., The current research was funded through grants PID2020–112770RB-C22, PID2022–141080OB-C22, CNS2022–135285, PID2023–147200OB 100, PID2023–151371OB-C22, PID2023–151078OB-I00 and RyC2021–030929-I by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Additional funding from SI3/PJI/ 2021–00216 by Comunidad de Madrid and UAM is also acknowledged. FJFA acknowledges the Formación de Profesorado Universitario program, ref. FPU22/04365. Time allocated at ALBA synchrotron through 2020094555-BL24-CIRCE experiment is greatly appreciated., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid femtosecond laser and ion-implantation processing for controlled, deep, high-efficiency ablation in fused silica

  • García-Lechuga, Mario
  • Levy, Yoann
  • Solana-Ramírez, Irene
  • Cabello, Fátima
  • Ynsa, María Dolores
  • Bulgakova, Nadezhda M.
10 pages, 9 figures, 2 tables, Femtosecond laser modification of fused silica enables precise surface tailoring for the fabrication of micro-optical components such as microlenses and diffractive elements. However, the process is governed by laser–matter interactions where the local fluence determines the processing depth, often limiting control over feature geometry and efficiency. Here, we present a hybrid approach combining localized Au implantation (1.8 MeV Au<sup>2+</sup> ions) into SiO<inf>2</inf> samples with femtosecond laser irradiation (250 fs), effectively tuning the laser–matter interaction and resulting morphology. At both 515 nm and 1030 nm irradiation wavelengths, single-shot femtosecond pulses produce cylindrical craters with sharp edges and flat-bottom profiles. Independently of the fluence, these craters exhibit a constant depth of 550 nm, corresponding to the region of maximum Au concentration. The effect manifests already at moderate fluence (∼4 J/cm<sup>2</sup>) and yields high ablation efficiency, up to 15 µm<sup>3</sup>/µJ. The hybrid method also works effectively at lower implantation doses that preserve the excellent transmission of fused silica, offering a promising pathway for the high-quality fabrication of flat optical components such as binary phase masks, phase lenses, or fused-silica micromolds., This work is part of the Spanish National projects ULS_PSB (PID2020–112770RB-C21 and PID2020–112770RB-C22), HyperSpec (PID2023-148178OB-C22) funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU, and the Regional Government of Madrid through the project TEC MATRIX-CM (TEC-2024/TEC-85). It was partially funded by the CSIC through the call for internationalization i-LINK 2022 (project ILINK22056). The work of Y.L. and N.M.B. has been funded by a grant from the Programme Johannes Amos Comenius under the Ministry of Education, Youth and Sports of the Czech Republic SENDISO project No. CZ.02.01.01/00/22_008/0004596. Authors acknowledge the support from CMAM-UAM for the beam time (STD045/22, STD009/23, STD024/23 and STD025/23) and its technical staff support. I.S. acknowledges the support by the Spanish Ministry of Science, Innovation and Universities via a doctoral grant (FPU23/01300)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Local control of perpendicular magnetic anisotropy of Pd/Co multilayers via ion bombardment

  • Sebastiani-Tofano, Eugenia
  • Parente, Ana
  • Alcázar Ruano, Pedro L.
  • Abuín, Manuel
  • González-García, Álvaro
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Manso Silvan, M.
  • Mascaraque, Arantzazu
  • González Barrio, Miguel Ángel
  • Menghini, Mariela
  • Schuller, Ivan K.
  • Basaran, Ali C.
  • González, Elvira M.
  • Rodríguez de la Fuente, Óscar
  • Muñoz-Noval, A.
In this work, we have controlled locally the magnetic anisotropy of PdCo multilayers using ion beam modification. First, we have used techniques with different probing depths to confirm that cobalt is partially oxidized in the Pd/Co multilayers exhibiting PMA fabricated by sputtering, presumably due to the diffusion of atmospheric oxygen migrated through the Pd capping layer. Then, low energy ion bombardment has been employed to induce a structural disorder in the upper layers of the multilayer, gradually reducing the PMA at local scale with increasing ion doses. Medium ion doses lead to a marked decline in PMA, resulting in equivalent magnetic anisotropy directions and the loss of characteristic labyrinthine magnetic domain morphology. High ion doses completely suppress PMA, yielding a typical in-plane shape anisotropy. By combining controlled PMA reduction via lithographic techniques, we create elongated structures displaying distinct magnetic responses; bombarded regions exhibit reduced PMA, whereas adjacent regions maintain their PMA. Notably, regions with reduced PMA do not disrupt the distribution of perpendicular magnetic domains in neighboring PMA regions, even at widths as narrow as 500 nm, demonstrating the robustness of the PMA domain structure., The authors acknowledge financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación, Spain, through projects PID2021–122980OB-C51, PID2021-122980OB-C52, PID2021-126323OA-I00 and CNS2023-144128; from Ministerio de Universidades (Salvador de Madariaga program) through research stay PRX21/00740. Authors also acknowledge funds from European Commission through MAGNAMED 734801 project (H2020-MSCA-RISE-2016), as well as from 2018-T1/IND-10360 Talento Program and project TEC-2024/TEC-380 “Mag4TIC” from Comunidad de Madrid. The authors are also grateful to the SpLine staff for their valuable help during experiment No. 25-02-1002 and for the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades and Consejo Superior de Investigaciones Científicas under Grant Nos. 2010 6O E 013, 2021 60 E 030 and CEX2024-001445-S. J. Romero from the C.A.I de Técnicas Físicas-UCM is acknowledged for the SQUID measurements. J.L.-S. acknowledges the financial support from grant PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF + ). M.M.S. acknowledges projects PID2020-112770RB-C22 and PID2023-151371OB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER, EU. A.G-G. thanks Universidad Complutense de Madrid and Banco Santander (CT82/20-CT83/20) for financial support. M.M. acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2020-001039-S). Work at UCSD was supported by the U.S. Department of Energy’s Office of Basic Energy Science under Grant DE-FG02-87ER45332., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S; CEX2020-001039-S)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Iodine-substituted hydroxyapatite nanoparticles and activation of derived ceramics for range verification in proton therapy

  • Magro Hernández, Raúl
  • Muñoz Noval, Alvaro
  • Briz, José Antonio
  • Rodríguez Murias, Javier
  • Espinosa Rodríguez, Andrea
  • Fraile, Luis Mario
  • Agulló Rueda, Fernando
  • Ynsa, Maria Dolores
  • Tavares de Sousa, Célia
  • Cortés Llanos, Belén
  • García López, Gastón
  • Nacher González, Enrique
  • García Távora, Vicente
  • Mont i Geli, Nil|||0000-0003-4249-7281
  • Nerio Aguirre, Amanda
  • Valladolid Onecha, Víctor
  • Pallàs i Solís, Max|||0000-0001-6137-0812
  • Tarifeño Saldivia, Ariel
  • Tengblad, Olof Erik
  • Manso Silvan, Miguel
  • Viñals Onsens, Silvia
Osteosarcoma is a radioresistant cancer, and proton therapy is a promising radiation alternative for treating cancer with the advantage of a high dose concentration in the tumor area. In this work, we propose the use of iodine-substituted hydroxyapatite (IHAP) nanomaterials to use iodine (127I) as a proton radiation tracer, providing access to range verification studies in mineralized tissues. For this purpose, the nanomaterials were synthesized at four iodine concentrations via hydrothermal synthesis. The materials were characterized via different microstructural techniques to identify an optimal high iodine concentration and pure apatite phase nanomaterial. Finally, such pure IHAP powders were shaped and irradiated with proton beams of 6 and 10 MeV, and their activation was demonstrated through subsequent decay analysis. The materials could be integrated into phantom structures for the verification of doses and ranges of protons prior to animal testing and clinical proton therapy treatments of tumors located deep under combined soft and calcified tissues., The current research was funded through grants PID2020-112770RB-C21, PDC2022-133382-I00 and PID2020-112770RB-C22 and PID2023-151371OB-C22 by MCIN/AEI/10.13039/501100011033 and FEDER, EU, grant FLASHOnChip (PLEC2022-009256) by MCIN, ASAP-CM (P2022/BMD-7434) from DGI-Comunidad de Madrid and CIPROM/2021/064 from Generalitat Valenciana. Beamtime at the CMAM through experiment EUB004/22 is acknowledged., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Iodine-substituted hydroxyapatite nanoparticles and activation of derived ceramics for range verification in proton therapy

  • Magro Hernández, Raúl
  • Muñoz Noval, Alvaro
  • Briz, José Antonio
  • Rodríguez Murias, Javier
  • Espinosa Rodríguez, Andrea
  • Fraile, Luis Mario
  • Agulló Rueda, Fernando
  • Ynsa, Maria Dolores
  • Tavares de Sousa, Célia
  • Cortés Llanos, Belén
  • García López, Gastón
  • Nacher González, Enrique
  • García Távora, Vicente
  • Mont i Geli, Nil
  • Nerio Aguirre, Amanda
  • Valladolid Onecha, Víctor
  • Pallàs i Solís, Max
  • Tarifeño Saldivia, Ariel
  • Tengblad, Olof Erik
  • Manso Silvan, Miguel
  • Viñals Onsens, Silvia
Osteosarcoma is a radioresistant cancer, and proton therapy is a promising radiation alternative for treating cancer with the advantage of a high dose concentration in the tumor area. In this work, we propose the use of iodine-substituted hydroxyapatite (IHAP) nanomaterials to use iodine (127I) as a proton radiation tracer, providing access to range verification studies in mineralized tissues. For this purpose, the nanomaterials were synthesized at four iodine concentrations via hydrothermal synthesis. The materials were characterized via different microstructural techniques to identify an optimal high iodine concentration and pure apatite phase nanomaterial. Finally, such pure IHAP powders were shaped and irradiated with proton beams of 6 and 10 MeV, and their activation was demonstrated through subsequent decay analysis. The materials could be integrated into phantom structures for the verification of doses and ranges of protons prior to animal testing and clinical proton therapy treatments of tumors located deep under combined soft and calcified tissues., The current research was funded through grants PID2020-112770RB-C21, PDC2022-133382-I00 and PID2020-112770RB-C22 and PID2023-151371OB-C22 by MCIN/AEI/10.13039/501100011033 and FEDER, EU, grant FLASHOnChip (PLEC2022-009256) by MCIN, ASAP-CM (P2022/BMD-7434) from DGI-Comunidad de Madrid and CIPROM/2021/064 from Generalitat Valenciana. Beamtime at the CMAM through experiment EUB004/22 is acknowledged., Peer Reviewed, Postprint (published version)
Docta Complutense
Publication Artículo científico (JournalArticle)

Local control of perpendicular magnetic anisotropy of Pd/Co multilayers via ion bombardment

  • Sebastiani Tofano, Eugenia
  • Parente Campos, Ana
  • Alcázar Ruano, Pedro Luis
  • Abuín, Manuel
  • González García, Álvaro Antonio
  • López Sánchez, Jesús
  • Rubio Zuazo, Juan
  • Manso Silván, Miguel
  • Mascaraque Susunaga, Arantzazu
  • González Barrio, Miguel Ángel
  • Menghini, Mariela
  • Schuller, Ivan K.
  • Basaran, Ali C.
  • González Herrera, Elvira María
  • Rodríguez De La Fuente, Óscar
  • Muñoz Noval, Álvaro
In this work, we have controlled locally the magnetic anisotropy of PdCo multilayers using ion beam modification. First, we have used techniques with different probing depths to confirm that cobalt is partially oxidized in the Pd/Co multilayers exhibiting PMA fabricated by sputtering, presumably due to the diffusion of atmospheric oxygen migrated through the Pd capping layer. Then, low energy ion bombardment has been employed to induce a structural disorder in the upper layers of the multilayer, gradually reducing the PMA at local scale with increasing ion doses. Medium ion doses lead to a marked decline in PMA, resulting in equivalent magnetic anisotropy directions and the loss of characteristic labyrinthine magnetic domain morphology. High ion doses completely suppress PMA, yielding a typical in-plane shape anisotropy. By combining controlled PMA reduction via lithographic techniques, we create elongated structures displaying distinct magnetic responses; bombarded regions exhibit reduced PMA, whereas adjacent regions maintain their PMA. Notably, regions with reduced PMA do not disrupt the distribution of perpendicular magnetic domains in neighboring PMA regions, even at widths as narrow as 500 nm, demonstrating the robustness of the PMA domain structure.