Skip to main content

ELEMENTOS MAGNETICOS NANOESTRUCTURADOS PARA APLICACIONES NEUROMORFICAS DE LA ESPINTRONICA

PID2020-115159GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dimensionality-driven metal–insulator transition in spin–orbit-coupled IrO2

  • Arias-Egido, Eduardo
  • Laguna-Marco, M. A.
  • Piquer, Cristina
  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Morellón, Luis
  • Gallego, Fernando
  • Rivera-Calzada, Alberto
  • Cabero-Piris, Mariona
  • Santamaría, Jacobo
  • Fabbris, Gilberto
  • Haskel, D.
  • Boada, Roberto
  • Díaz-Moreno, Sofía
This article is part of the themed collection: Recent Open Access Articles, A metal–insulator transition is observed in spin–orbit-coupled IrO2 thin films upon reduction of the film thickness. In the epitaxially grown samples, the critical thickness (t ∼ 1.5–2.2 nm) is found to depend on growth orientation (001), (100) or (110). Interestingly from the applied point of view, the insulating behavior is found even in polycrystalline ultrathin films. By analyzing the experimental electrical response with various theoretical models, we find good fits to the Efros–Shklovskii-VRH and the Arrhenius-type behaviors, which suggests an important role of electron correlations in determining the electrical properties of IrO2. Our magnetic measurements also point to a significant role of magnetic order. Altogether, our results would point to a mixed Slater- and Mott-type of insulator., This work was partially supported by the Spanish MINECO projects MAT2014-54425-R (MINECO/FEDER, UE), MAT2017-82970-C2-R (AEI/FEDER, UE), MAT2017-83468-R (AEI/FEDER, UE), MAT2017-87134-C02-01-R (AEI/FEDER, UE) and MAT2017-87134-C02-02-R (AEI/FEDER, UE), the Spanish MICINN project PID2020-115159GB-I00 / AEI / 10.13039/501100011033 and by the Aragon Regional Government (Projects No. E12-20R and E28-20R). E. A-E acknowledges the Spanish MINECO and the European Social Fund for an FPI (Formación de Personal Investigador, 2015) grant. R. B. acknowledges funding support from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 665919. This research used resources of the APS, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. We acknowledge Diamond Light Source for time on I20-Scanning under Proposal SP-17266. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation Horizon 2020. The authors acknowledge funding from the project Quantox of QuantERA ERA-NET Cofund of Quantum Technologies (Grant Agreement No. 731473) implemented within the European Union's Horizon 2020 Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Origin of the unusual ground-state spin S = 9 in a Cr10 single-molecule magnet

  • Rubín, Javier
  • Arauzo, Ana B.
  • Bartolomé, Elena
  • Sedona, Francesco
  • Rancan, Marzio
  • Armelao, Lidia
  • Luzón, Javier
  • Guidi, Tatiana
  • Garlatti, Elena
  • Wilhelm, Fabrice
  • Rogalev, Andrei
  • Amann, Andreas
  • Spagna, Stefano
  • Bartolomé, Juan
  • Bartolomé, Fernando
The molecular wheel [Cr10(OMe)20(O2CCMe3)10], abbreviated {Cr10}, with an unusual intermediate total spin S = 9 and non-negligible cluster anisotropy, D/kB = −0.045(2) K, is a rare case among wheels based on an even number of 3d-metals, which usually present an antiferromagnetic (AF) ground state (S = 0). Herein, we unveil the origin of such a behavior. Angular magnetometry measurements performed on a single crystal confirmed the axial anisotropic behavior of {Cr10}. For powder samples, the temperature dependence of the susceptibility plotted as χT(T) showed an overall ferromagnetic (FM) behavior down to 1.8 K, whereas the magnetization curve M(H) did not saturate at the expected 30 μB/fu for 10 FM coupled 3/2 spin Cr3+ ions, but to a much lower value, corresponding to S = 9. In addition, the X-ray magnetic circular dichroism (XMCD) measured at high magnetic field (170 kOe) and 7.5 K showed the polarization of the cluster moment up to 23 μB/fu. The magnetic results can be rationalized within a model, including the cluster anisotropy, in which the {Cr10} wheel is formed by two semiwheels, each with four Cr3+ spins FM coupled (JFM/kB = 2.0 K), separated by two Cr3+ ions AF coupled asymmetrically (J23/kB = J78/kB = −2.0 K; J34/kB = J89/kB = −0.25 K). Inelastic neutron scattering and heat capacity allowed us to confirm this model leading to the S = 9 ground state and first excited S = 8. Single-molecule magnet behavior with an activation energy of U/kB = 4.0(5) K in the absence of applied field was observed through ac susceptibility measurements down to 0.1 K. The intriguing magnetic behavior of {Cr10} arises from the detailed asymmetry in the molecule interactions produced by small-angle distortions in the angles of the Cr–O–Cr alkoxy bridges coupling the Cr3+ ions, as demonstrated by ab initio and density functional theory calculations, while the cluster anisotropy can be correlated to the single-ion anisotropies calculated for each Cr3+ ion in the wheel., The authors acknowledge financial support from the Spanish Agencia Estatal de Investigación, through Projects MAT2017-83468-R (AEI/FEDER, UE) and PID2020-115159GB-I00/AEI/10.13039/501100011033, Aragonese Project RASMIA E12_20R (co-funded by Fondo Social Europeo) and of the European Union FEDER (ES). Also University of Padova Grants P-DISC#09BIRD2019-UNIPD SMOW., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Probing the tunability of magnetism with external pressure in metastable Sr2NiIrO6 double perovskite

  • Laguna-Marco, M. A.
  • Arias-Egido, Eduardo
  • Cuartero, Vera
  • Herrero-Albillos, Julia
  • Kayser, P.
  • Alonso, J. A.
  • Fabbris, Gilberto
  • Haskel, D.
  • Irifune, Tetsuo
In Sr2NiIrO6 long-range Ir-Ir antiferromagnetic exchange interactions have been reported to overcome the ferromagnetic Ni-Ir interactions hampering the otherwise expected ferromagnetic behavior. Prompted by this, a combination of x-ray absorption spectroscopy and x-ray diffraction at high pressure is used here to investigate the interplay between the magnetic structure of the Ir sublattice and lattice degrees of freedom. The compression of Sr2NiIrO6 drives an unexpected nonmonotonic change of the x-ray magnetic circular dichroism (XMCD) spectra: The intensity first decreases in the 0- to 18-GPa range, then shows an increase in the 18- to 30-GPa range and again decreases for higher pressures. The XMCD intensity, a measure of the net magnetization in the Ir sublattice, however, is found to remain very low in the whole pressure range so the observed changes do not correspond with a transition from antiferromagnetic to ferromagnetic or ferrimagnetic order. The evolution of the XMCD is better explained in terms of a weakening/strengthening of the long-range antiferromagnetic (AFM) Ir-Ir interaction between ferromagnetic planes associated with the reduction of the lattice parameters. In particular, a correlation can be established between the evolution of the b/a ratio and the weakening/strengthening of the AFM interaction., This work was supported by Spanish MINECO Projects No. MAT2014-54425-R (AEI/FEDER, UE), No. MAT201783468-R (AEI/FEDER, UE), and No. MAT2017-84496R (AEI/FEDER, UE), MICINN Project No. PID2020115159GB-I00/AEI/10.13039/501100011033, and the regional Government of Aragon (Grant No. E12-20R RASMIA). E.A.-E. acknowledges the Spanish MINECO and the European Social Fund for a FPI (Formación de Personal Investigador, 2015) grant. This research used resources of the APS, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DEAC02-06CH11357., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Temperature- and field-induced transformation of the magnetic state in Co2.5Ge0.5BO5

  • Kazak, Natalia V.
  • Arauzo, Ana B.
  • Bartolomé, Juan
  • Belskaya, Nadejda A.
  • Vasiliev, Alexander D.
  • Velikanov, Dmitriy А.
  • Eremin, Evgeny
  • Gavrilkin, Sergey Yu.
  • Zhandun, Vyacheslav S.
  • Patrin, Gennadii Semenovich
  • Ovchinnikov, Sergey G.
A tetravalent-substituted cobalt ludwigite Co2.5Ge0.5BO5 has been synthesized using the flux method. The compound undergoes two magnetic transitions: a long-range antiferromagnetic transition at TN1 = 84 K and a metamagnetic one at TN2 = 36 K. The sample-oriented magnetization measurements revealed a fully compensated magnetic moment along the a- and c-axes and an uncompensated one along the b-axis leading to high uniaxial anisotropy. A field-induced enhancement of the ferromagnetic correlations at TN2 is observed in specific heat measurements. The DFT+GGA calculation predicts the spin configuration of (↑↓↓↑) as a ground state with a magnetic moment of 1.37 μB/f.u. The strong hybridization of Ge(4s, 4p) with O (2p) orbitals resulting from the high electronegativity of Ge4+ is assumed to cause an increase in the interlayer interaction, contributing to the long-range magnetic order. The effect of two super–superexchange pathways Co2+-O-B-O-Co2+ and Co2+-O-M4-O-Co2+ on the magnetic state is discussed., This work has been financed by the Russian Foundation for Basic Research (project no. 20-02-00559). The authors acknowledge financial support from the Spanish Agencia Estatal de Investigación, through projects MAT2017-83468-R (AEI/FEDER, UE) and PID2020-115159GB-I00/AEI/10.13039/501100011033, the Aragonese project RASMIA E12_20R (co-funded by Fondo Social Europeo), and of the European Union FEDER (ES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Wüstite as a catalyst source for water remediation: Differentiated antimicrobial activity of by-products, action routes of the process, and transformation of fluoroquinolones

  • Jojoa-Sierra, Sindy D.
  • Herrero-Albillos, Julia
  • Ormad, María P.
  • Serna-Galvis, Efraím A.
  • Torres-Palma, Ricardo A.
  • Mosteo, Rosa
Wüstite under simulated solar irradiation with addition of H2O2 was used to treat enrofloxacin and levofloxacin in water. Wüstite was characterized, showing 2.1 eV of bandgap and species of Fe3+ on the surface that favor its catalytic ability. The effect of light intensity, wüstite dose, concentration of H2O2, and pH on the removal of antimicrobial activity (AA, against S. aureus and E. coli), was tested, finding as suitable conditions: [intensity]: 500 W m−2, [wüstite]: 10 mg L-1, [H2O2]: 1.0 mmol L-1, and pH 6.5. Under such conditions, up to 100% of AA elimination occurred at 180 min of treatment. The Light-Wüstite-H2O2 system involved, the action of light, O2•−, 1O2, and HO•, where wüstite acted as a semiconductor and a catalyst for heterogeneous photo-Fenton. Furthermore, this system mineralized 21% of ENR, and the wüstite catalyst promoted 100% of AA removal up to the fourth reuse cycle. Interestingly, the application of Light-Wüstite-H2O2 to an actual effluent led to complete AA removal after 180 min treatment. The process action on ENR generated six stable products, exhibiting the loss of the fluorine atom (induced by light directly) and modifications on the ethyl-piperazyl group (reactive region according to calculations of atomic charge) by radical attacks. The relationship between the AA and structural transformations showed that those products that retained quinolone and piperazyl moieties had AA., We acknowledge financial support from the Spanish MCINN, Project MAT2017-83468-R (AEI/FEDER, UE) and the Aragonese Groups “Agua y Salud Ambiental” (B43_2OR) and RASMIA B43_2OR. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. S.D Jojoa-Sierra thanks Banco Santander for the financing help: Mobility grants for Ibero-American Ph.D. students (University of Zaragoza – Santander-Universities). E. A. Serna-Galvis thanks MINCIENCIAS-COLOMBIA for his postdoctoral fellowship (Convocatoria 848 de 2019). J. Herrero-Albillos thanks the support provided through the project PID2020-115159GB-I00/AEI/10.13039/501100011033. R. A. Torres-Palma acknowledges the support provided by Universidad de Antioquia Udea and the project 2017-15947 (BUPP: ES84170136) from the same university., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface Deposition Induced Reduction of the Ground State Spin in Cr10 Wheel

  • Bartolomé, Elena
  • Ferrari, Ludovica
  • Sedona, Francesco
  • Arauzo, Ana B.
  • Rubín, Javier
  • Luzón, Javier
  • Herrero-Albillos, Julia
  • Panighel, Mirko
  • Mugarza, Aitor
  • Rancan, Marzio
  • Sambi, Mauro
  • Armelao, Lidia
  • Bartolomé, Juan
  • Bartolomé, Fernando
We report the deposition of monolayers and multilayers of {Cr10(OMe)20(O2CCMe3)10} wheels, hereafter {Cr10}, onto Au(111) and Cu(111) single-crystal substrates, and their characterization combining scanning tunneling microscopy, X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, X-ray natural linear dichroism, and X-ray magnetic circular dichroism (XMCD). {Cr10} in bulk shows axial magnetic anisotropy and a cluster total spin S = 9 ground state, stemming from an interaction scheme of two semi-crowns containing four Cr3+ ions interacting ferromagnetically, separated by two Cr3+ antiferromagnetically coupled. The one-monolayer (1ML) samples of {Cr10} sublimated on Ag(111) and Cu(111) show slightly different applied magnetic field dependence of XMCD signal. The field-dependence of the magnetization evolves from a lower curve for the 1ML {Cr10} samples to a curve resembling the bulk one as the number of layers is increased, as shown in a 14ML sample. Monte Carlo simulations allow rationalizing the magnetization curves of the 1ML samples in terms of a reduction of the cluster ground-state total spin, S = 3 or S = 6, as a consequence of variations in the intra-wheel coupling interactions induced by the on-surface deposition. The sensitivity of the magnetic configuration of {Cr10} to minor distortions of the intramolecular conformation might be exploited to control magnetism by external stimuli for applications., The authors acknowledge financial support from the Spanish Agencia Estatal de Investigación, through projects PID2020-115159GB-I00/AEI/10.13039/501100011033, Aragonese project RASMIA E12-23R co-funded by Fondo Social Europeo of the European Union FEDER (ES). Also University of Padova Grants P-DISC#09BIRD2019-UNIPD SMOW., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Novel Ir1–xCoxO2 thin films: Growth and characterization

  • Laguna-Marco, M. A.
  • Herrero-Albillos, Julia
  • Aguirre, Myriam H.
  • Rueda-Jiménez, Marcos
  • Mikulska, Iuliia
Ir1–xCoxO2 thin films have been prepared by reactive co–sputtering deposition at room temperature. Composition, structure, electronic properties and electric and magnetic behavior have been analyzed by different techniques including XRR, XRD, TEM microscopy, SQUID magnetometry, electrical resistivity and XAS spectroscopy. After annealing, an Ir1–xCoxO2 substitutional solid solution phase with rutile crystal structure was achieved for a wide Co-doping range 0 ≤ x ≤ 0.6. Starkly departing from the highly insulating behavior of CoO and Co3O4, the electrical resistivity at room temperature of our films is only slightly higher than that of IrO2. Likewise, our work shows that the magnetic response of the doped films is very similar to that of the paramagnetic parent IrO2. Neither ferromagnetism nor enhanced paramagnetism is observed. XAS spectra indicate a Co3+ oxidation state and, correspondingly, an oxidation state of ∼5+ for Ir ions in the polycrystalline Ir0.6Co0.4O2 film. By application of sum rules, a 13 % increase in the spin–orbit coupling is found despite the lattice shrinkage causes a detrimental bandwidth broadening., This work was supported by Project PID2020-115159GB-I00 funded by Spanish MCIN/AEI/10.13039/501100011033 and by the Regional Government of Aragon (Grant No. E12-23R RASMIA). We acknowledge Diamond Light Source for time on B18 under Proposal SP-32410. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. The authors also gratefully acknowledge the European Commission for the financial support under the H2020-MSCA-RISE-2020 MELON project Nº 872631 and H2020-MSCA-RISE-2021 ULTIMATE-I project Nº 101007825., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ferromagnetism on an atom-thick & extended 2D metal-organic coordination network

  • Lobo-Checa, Jorge
  • Hernández-López, Leyre
  • Otrokov, Mikhail M.
  • Piquero-Zulaica, Ignacio
  • Candia, Adriana E.
  • Gargiani, Pierluigi
  • Serrate, David
  • Delgado, Fernando
  • Valvidares, Manuel
  • Cerdá, Jorge I.
  • Arnau, Andrés
  • Bartolomé, Fernando
Ferromagnetism is the collective alignment of atomic spins that retain a net magnetic moment below the Curie temperature, even in the absence of external magnetic fields. Reducing this fundamental property into strictly two-dimensions was proposed in metal-organic coordination networks, but thus far has eluded experimental realization. In this work, we demonstrate that extended, cooperative ferromagnetism is feasible in an atomically thin two-dimensional metal-organic coordination network, despite only ≈ 5% of the monolayer being composed of Fe atoms. The resulting ferromagnetic state exhibits an out-of-plane easy-axis square-like hysteresis loop with large coercive fields over 2 Tesla, significant magnetic anisotropy, and persists up to TC ≈ 35 K. These properties are driven by exchange interactions mainly mediated by the molecular linkers. Our findings resolve a two decade search for ferromagnetism in two-dimensional metal-organic coordination networks., We acknowledge financial support from Grant References No. PID2019-107338RB-C64 (J.L.C., L.H.L., A.E.C., D.S.), PID2019-103910GB-I00 (M.M.O., A.A.), PID2020-115159GB-I00 (L.H.L., F.B.), PID2020-116181RB-C32 (P.G., M.V.), PID2022-138750NB-C21 (J.L.C., A.E.C., D.S.), PID2022-138269NB-I00 (F.D.), PRTR-C17.I1 (J.L.C., M.M.O., D.S.), and RED2018-102833-T (J.L.C., D.S.) funded by MCIN/AEI/10.13039/ 501100011033, by “ERDF A way of making Europe” and “European Union NextGenerationEU/PRTR”. Also financing from FlagEra SOgraphMEM PCI2019-111908-2 (P.G., M.V.). (AEI/FEDER) and the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI) (J.L.C., L.H.L., I.P.Z., D.S., F.B.) is acknowledged. We also thank the Basque Goverment Grant No. IT-1527-22 (M.M.O., A.A.) and the Aragonese Projects RASMIA E12_20R (J.L.C., L.H.L., F.B.) and NANOMIDAS E13_20R (D.S.), co-funded by Fondo Social Europeo. The synchrotron radiation experiments were performed at BOREAS beamline under offical and inhouse proposals ID2020024265 and ID202109544445., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Imaging interfacial topography with coherent x-ray reflectivity

  • Fenter, Paul
  • Calvo Almazán, Irene
The use of coherent x-ray reflectivity to image interfaces is illustrated using model calculations for three cases: a thin film, a semi-infinite substrate, and a coherently strained epitaxial thin film. The intensities and phases of the coherent scattering signals are calculated based on a fully atomistic model (where the phases are assumed to have been recovered by a phasing algorithm). We describe the characteristics of the effective density that are obtained by direct inverse Fourier transformation of the complex structure factors, using a window function to define the data range. These effective densities include significant artifacts like oscillations and negative values derived from the finite vertical momentum transfer of the window function. Two approaches are described to extract the surface topography from the effective densities for three-dimensional visualization: (i) multiplying the effective density by a phase factor and (ii) analyzing the data as a hybrid structure factor 𝐹⁡(𝑥,𝑄𝑧). The explicit surface sensitivity and specificity of measurements is illustrated when the film or substrate Bragg peaks are excluded. These considerations show that images of interfacial topography can be obtained using currently available experimental capabilities with parameters corresponding to epitaxial thin films., This paper was primarily funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences program (FWP#57814) under Contract No. DE-AC02-06CH11357 to UChicago Argonne, LLC as operator of Argonne National Laboratory. I.C.-A. would also like to acknowledge the European Funding “Next Generation EU” through the program “María Zambrano,” a joint effort of the University of Zaragoza and the Spanish University Council (published on the 24th of July of 2021). She also acknowledges financial support from the Spanish Agencia Estatal de Investigación, through Project No. PID2020-115159GBI00/AEI/10.13039/501100011033 and Aragonese Project No. RASMIA E12-23R cofunded by Fondo Social Europeo of the European Union FEDER (ES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Inhomogeneous probes for Bragg coherent diffraction imaging: Toward the imaging of dynamic and distorted crystals

  • Calvo Almazán, Irene
  • Chamard, Virginie
  • Grünewald, Tilman A.
  • Allain, Marc
This paper proposes an innovative approach to improve Bragg coherent diffraction imaging (BCDI) microscopy applied to time evolving crystals and/or nonhomogeneous crystalline strain fields, identified as two major limitations of BCDI microscopy. Speckle BCDI (spBCDI), introduced here, rests on the ability of a strongly nonuniform illumination to induce a convolution of the three-dimensional (3D) frequency content associated with the finite-size crystal and a kernel acting perpendicularly to the illumination beam. In the framework of Bragg diffraction geometry, this convolution is beneficial as it encodes some 3D information about the sample in a single two-dimensional (2D) measurement, i.e., in the detector plane. With this approach, we demonstrate that we can drastically reduce the sampling frequency along the rocking curve direction and still obtain datasets with enough information to be inverted by a traditional phase retrieval algorithm. Numerical simulations, performed for a highly distorted crystal, show that spBCDI allows a gain in the sampling ratio ranging between 4 and 20 along the rocking curve scan, for a speckle illumination with individual speckle size of 50 nm at the sample position. Furthermore, spBCDI allows working at low intensity levels, leading to an additional gain for the total scanning time. Reductions of a factor of about 40 were numerically observed. Thus, full 3D datasets measured in the 0.2 s time scale at fourth-generation synchrotrons become feasible, with a remarkable potential for the imaging of strongly distorted crystals. Practical details on the implementation of the method are also discussed., I.C.-A. acknowledges funding by the European Union–NextGenerationEU, the grant PID2020-115159GB-I00/AEI/10.13039/501100011033, and Project RASMIA E12-23R co-funded by Gobierno de Aragón and Fondo Social Europeo of the European Union FEDER (ES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser driven generation of single atom Fe-N-C catalysts for the oxygen reduction reaction

  • Madrid, Ainhoa
  • Tolosana-Moranchel, Álvaro
  • García, Álvaro
  • Rojas Muñoz, Sergio
  • Bartolomé, Fernando
  • Pakrieva, Ekaterina
  • Simonelli, Laura
  • Martínez, Gema
  • Hueso, José L.
  • Santamaría, Jesús
Single-Atom Catalysts (SACs) have emerged as the ultimate solutions in challenging systems bridging the gap between homogeneous and heterogeneous catalysts. However, feasible synthesis methods are necessary to stabilize single metal atoms, increase catalyst loadings and scale up the synthesis. Due to its sluggish kinetics, the oxygen reduction reaction (ORR) is the main source of irreversibility in proton exchange membrane fuel cells (PEMFC). The most promising candidates to replace Pt-based catalysts for the ORR in fuel cells are the so-called Fe-N/C catalysts. These catalysts display high ORR activity in acidic and alkaline electrolytes. In this work, we propose a laser-driven pyrolysis approach to generate Fe-N/C SACs that involves decomposition of aerosolized iron-phthalocyanines. The resulting catalyst displays ORR activity in acidic and alkaline electrolytes, with competitive half-potential and kinetic current density values in comparison with state-of-the-art electrocatalysts., The authors thank funding from the Spanish Research Agency and MICN/AEI (projects PID2020-114926RB-I00, CNS2022-135911 and PID2020-115159 GB-I00) and from CIBER-BBN and the Government of Aragon (Group T57_23R). Financial support from PID2020-116712RB-C21 funded by MCIN/AEI/10.13039/501100011033 is also acknowledged. We also thank the Consejería de Educación, Juventud y Deporte of the Comunidad de Madrid for the Ayuda Destinada a la Atracción de Talento Investigador (2020-T2/AMB-19927) granted to Álvaro Tolosana Moranchel. The Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for the project number 341 is also acknowledged. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit (Unit 9) of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia y Materiales de Aragon, Universidad de Zaragoza, Spain. The XAS experiments were performed at the CLAESS beamline of the ALBA synchrotron (proposal number 2022097042) with the support of the ALBA staff. Ayuda CEX2023-001286-S financiada por MICIU/AEI /10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insights into strain change of calcite by imaging defect-driven dissolution in the presence of Pb2+

  • Suzana, Ana F.
  • Lee, Sang Soo
  • Calvo Almazán, Irene
  • Cha, Wonsuk
  • Harder, Ross
  • Fenter, Paul
The presence of microscopic strain can determine the macroscopic properties of crystalline structures. However, the capability of quantifying and imaging strain variations in particles undergoing chemical reactions remains limited. Here, we exploit the ability of three-dimensional (3D) Bragg Coherent Diffraction Imaging (BCDI) to capture changes in the 3D strain maps and morphology of individual calcite (calcium carbonate, CaCO3) particles before and after dissolution in a lead-containing aqueous solution at pH 3.7. BCDI reconstructions show that calcite dissolution occurs preferentially at tensile-strained regions near macrosteps. This observation demonstrates that the local reactivity of calcite (i.e., as measured by the spatial distribution of its dissolution rate) is influenced by pre-existing strains for as-grown calcite nanocrystals. Additional studies will be required to develop a predictive understanding of the strain–reactivity relationship., This research was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Geosciences program (FWP 57814) under Contract DE-AC02-06CH11357 to UChicago Argonne, LLC as operator of Argonne National Laboratory. The BCDI measurement was performed at 34-ID-C beamline at the Advanced Photon Source (APS), Argonne National Laboratory, beamtime award https://doi.org/10.46936/APS-183392/60011389 and https://doi.org/10.46936/APS-182573/60010866. The CTR measurements were performed at the beamline 33-ID-D, APS, beamtime award https://doi.org/10.46936/APS-180194/60009636. This work used resources of the Advanced Photon Source, a U.S. DOE Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. ICA acknowledges financial support from the Spanish Agencia Estatal de Investigación, through Project No. PID2020-115159GBI00/AEI/10.13039/501100011033 and Aragonese Project No. RASMIA E12-23R cofunded by Fondo Social Europeo of the European Union FEDER (ES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Imaging surface topography with coherent x-ray reflectivity: Theory, kinematics, and simulations

  • Calvo Almazán, Irene
  • Das, Anusheela
  • Suzana, Ana F.
  • Bartolomé, Fernando
  • Fenter, Paul
A theoretical formalism is described for understanding coherent x-ray reflectivity (CXR) from the surface of a semi-infinite crystal having a variable surface topography, described by the height profile ℎ(𝑥,𝑦). The surface topography is imaged as a complex “effective density,” obtained from the phasing and inversion of the coherent x-ray reflectivity data, measured through a rocking scan centered at a vertical momentum transfer 𝑄0 𝑧 and a vertical range Δ⁢𝑄𝑧. The formalism predicts that the effective density has an amplitude with a maximum located at the surface height for each position within the surface plane. The phase of the effective density has a lateral variation that is controlled by the surface height and a vertical variation that reflects a combination of the interfacial structure and specific choice of measurement conditions. This understanding enables direct observation of nanometer-scale interfacial topography, i.e., ℎ⁡(𝑥,𝑦)⁢𝑐𝑠 (where 𝑐𝑠 is the vertical substrate lattice parameter) with Å-scale sensitivity to surface height. Numerical simulations illustrate and confirm the theoretical results. These results show how the interpretation of the interfacial density phase obtained by CXR data inversion (i.e., surface topography with respect to a flat surface) is conceptually similar to that previously known for Bragg coherent diffraction imaging (BCDI) measurements of isolated nanoparticles (i.e., lattice displacements with respect to an ideal crystal lattice). This suggests that CXR can be thought of as a form of dark field imaging with respect to the bright field BCDI approach. An implication of these results is that interfacial imaging may bypass some of the significant challenges associated with BCDI imaging of multiple particles having different orientations., This material is supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Geoscience Research Program (FWP 57814) under Contract No. DE-AC02-06CH11357. I.C.-A. would like to acknowledge the European Funding “Next Generation EU” through the program “María Zambrano”, a joint effort of the University of Zaragoza and the Spanish University Council. She also acknowledges financial support from the Spanish Agencia Estatal de Investigación, through Project No. PID2020-115159GB-I00/AEI/10.13039/501100011033 and the Aragonese Project No. RASMIA E12-23R cofunded by Fondo Social Europeo of the European Union FEDER (ES)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Origin of the unusual ground-state spin S = 9 in a Cr10single-molecule magnet

  • Rubín, J.
  • Arauzo, A.
  • Bartolomé, E.
  • Sedona, F.
  • Rancan, M.
  • Armelao, L.
  • Luzón, J.
  • Guidi, T.
  • Wilhelm, F.
  • Rogalev, A.
  • Amann, A.
  • Spagna, S.
  • Bartolomé, J.
  • Bartolomé, F.
The molecular wheel Cr10(OMe)20(O2CCMe3)10], abbreviated {Cr10}, with an unusual intermediate total spin S = 9 and non-negligible cluster anisotropy, D/kB= -0.045(2) K, is a rare case among wheels based on an even number of 3d-metals, which usually present an antiferromagnetic (AF) ground state (S = 0). Herein, we unveil the origin of such a behavior. Angular magnetometry measurements performed on a single crystal confirmed the axial anisotropic behavior of {Cr10}. For powder samples, the temperature dependence of the susceptibility plotted as ¿T(T) showed an overall ferromagnetic (FM) behavior down to 1.8 K, whereas the magnetization curve M(H) did not saturate at the expected 30 µB/fu for 10 FM coupled 3/2 spin Cr3+ions, but to a much lower value, corresponding to S = 9. In addition, the X-ray magnetic circular dichroism (XMCD) measured at high magnetic field (170 kOe) and 7.5 K showed the polarization of the cluster moment up to 23 µB/fu. The magnetic results can be rationalized within a model, including the cluster anisotropy, in which the {Cr10} wheel is formed by two semiwheels, each with four Cr3+spins FM coupled (JFM/kB= 2.0 K), separated by two Cr3+ions AF coupled asymmetrically (J23/kB= J78/kB= -2.0 K; J34/kB= J89/kB= -0.25 K). Inelastic neutron scattering and heat capacity allowed us to confirm this model leading to the S = 9 ground state and first excited S = 8. Single-molecule magnet behavior with an activation energy of U/kB= 4.0(5) K in the absence of applied field was observed through ac susceptibility measurements down to 0.1 K. The intriguing magnetic behavior of {Cr10} arises from the detailed asymmetry in the molecule interactions produced by small-angle distortions in the angles of the Cr-O-Cr alkoxy bridges coupling the Cr3+ions, as demonstrated by ab initio and density functional theory calculations, while the cluster anisotropy can be correlated to the single-ion anisotropies calculated for each Cr3+ion in the wheel.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Surface Deposition Induced Reduction of the Ground State Spin in Cr10 Wheel

  • Bartolomé, Elena
  • Ferrari, Ludovica
  • Sedona, Francesco
  • Arauzo, Ana
  • Rubín, Javier
  • Luzón, Javier
  • Herrero-Albillos, Julia
  • Panighel, Mirco
  • Mugarza, Aitor
  • Rancan, Marzio
  • Sambi, Mauro
  • Armelao, Lidia
  • Bartolomé, Juan
  • Bartolomé, Fernando
We report the deposition of monolayers and multilayers of {Cr10(OMe)20(O2CCMe3)10} wheels, hereafter {Cr10}, onto Au(111) and Cu(111) single‐crystal substrates, and their characterization combining scanning tunneling microscopy, X‐ray photoelectron spectroscopy, X‐ray absorption spectroscopy, X‐ray natural linear dichroism, and X‐ray magnetic circular dichroism (XMCD). {Cr10} in bulk shows axial magnetic anisotropy and a cluster total spin S  =  9 ground state, stemming from an interaction scheme of two semi‐crowns containing four Cr3+ ions interacting ferromagnetically, separated by two Cr3+ antiferromagnetically coupled. The one‐monolayer (1ML) samples of {Cr10} sublimated on Ag(111) and Cu(111) show slightly different applied magnetic field dependence of XMCD signal. The field‐dependence of the magnetization evolves from a lower curve for the 1ML {Cr10} samples to a curve resembling the bulk one as the number of layers is increased, as shown in a 14ML sample. Monte Carlo simulations allow rationalizing the magnetization curves of the 1ML samples in terms of a reduction of the cluster ground‐state total spin, S  =  3 or S  =  6, as a consequence of variations in the intra‐wheel coupling interactions induced by the on‐surface deposition. The sensitivity of the magnetic configuration of {Cr10} to minor distortions of the intramolecular conformation might be exploited to control magnetism by external stimuli for applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Novel Ir1–xCoxO2 thin films: Growth and characterization

  • Laguna–Marco, M. A.
  • Herrero-Albillos, J.
  • Aguirre, M. H.
  • Rueda-Jiménez, M.
  • Mikulska, I.
Ir1–xCoxO2 thin films have been prepared by reactive co–sputtering deposition at room temperature. Composition, structure, electronic properties and electric and magnetic behavior have been analyzed by different techniques including XRR, XRD, TEM microscopy, SQUID magnetometry, electrical resistivity and XAS spectroscopy. After annealing, an Ir1–xCoxO2 substitutional solid solution phase with rutile crystal structure was achieved for a wide Co-doping range 0 ≤ x ≤ 0.6. Starkly departing from the highly insulating behavior of CoO and Co3O4, the electrical resistivity at room temperature of our films is only slightly higher than that of IrO2. Likewise, our work shows that the magnetic response of the doped films is very similar to that of the paramagnetic parent IrO2. Neither ferromagnetism nor enhanced paramagnetism is observed. XAS spectra indicate a Co3+ oxidation state and, correspondingly, an oxidation state of ∼5+ for Ir ions in the polycrystalline Ir0.6Co0.4O2 film. By application of sum rules, a 13 % increase in the spin–orbit coupling is found despite the lattice shrinkage causes a detrimental bandwidth broadening.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ferromagnetism on an atom-thick & extended 2D metal-organic coordination network

  • Lobo-Checa, Jorge
  • Hernández-López, Leyre
  • Otrokov, Mikhail M.
  • Piquero-Zulaica, Ignacio
  • Candia, Adriana E.
  • Gargiani, Pierluigi
  • Serrate, David
  • Delgado, Fernando
  • Valvidares, Manuel
  • Cerdá, Jorge
  • Arnau, Andrés
  • Bartolomé, Fernando
Ferromagnetism is the collective alignment of atomic spins that retain a net magnetic moment below the Curie temperature, even in the absence of external magnetic fields. Reducing this fundamental property into strictly two-dimensions was proposed in metal-organic coordination networks, but thus far has eluded experimental realization. In this work, we demonstrate that extended, cooperative ferromagnetism is feasible in an atomically thin two-dimensional metal-organic coordination network, despite only ≈ 5% of the monolayer being composed of Fe atoms. The resulting ferromagnetic state exhibits an out-of-plane easy-axis square-like hysteresis loop with large coercive fields over 2 Tesla, significant magnetic anisotropy, and persists up to TC ≈ 35 K. These properties are driven by exchange interactions mainly mediated by the molecular linkers. Our findings resolve a two decade search for ferromagnetism in two-dimensional metal-organic coordination networks.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Imaging interfacial topography with coherent x-ray reflectivity

  • Fenter, Paul
  • Calvo Almazán, Irene
The use of coherent x-ray reflectivity to image interfaces is illustrated using model calculations for three cases: a thin film, a semi-infinite substrate, and a coherently strained epitaxial thin film. The intensities and phases of the coherent scattering signals are calculated based on a fully atomistic model (where the phases are assumed to have been recovered by a phasing algorithm). We describe the characteristics of the effective density that are obtained by direct inverse Fourier transformation of the complex structure factors, using a window function to define the data range. These effective densities include significant artifacts like oscillations and negative values derived from the finite vertical momentum transfer of the window function. Two approaches are described to extract the surface topography from the effective densities for three-dimensional visualization: (i) multiplying the effective density by a phase factor and (ii) analyzing the data as a hybrid structure factor F (x , Q z ). The explicit surface sensitivity and specificity of measurements is illustrated when the film or substrate Bragg peaks are excluded. These considerations show that images of interfacial topography can be obtained using currently available experimental capabilities with parameters corresponding to epitaxial thin films.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser driven generation of single atom Fe-N-C catalysts for the oxygen reduction reaction

  • Madrid, Ainhoa
  • Tolosana-Moranchel, Álvaro
  • García, Álvaro
  • Rojas, Sergio
  • Bartolome, Fernando
  • Pakrieva, Ekaterina
  • Simonelli, Laura
  • Martinez, Gema
  • Hueso, Jose L.
  • Santamaria, Jesus
Single-Atom Catalysts (SACs) have emerged as the ultimate solutions in challenging systems bridging the gap between homogeneous and heterogeneous catalysts. However, feasible synthesis methods are necessary to stabilize single metal atoms, increase catalyst loadings and scale up the synthesis. Due to its sluggish kinetics, the oxygen reduction reaction (ORR) is the main source of irreversibility in proton exchange membrane fuel cells (PEMFC). The most promising candidates to replace Pt-based catalysts for the ORR in fuel cells are the so-called Fe-N/C catalysts. These catalysts display high ORR activity in acidic and alkaline electrolytes. In this work, we propose a laser-driven pyrolysis approach to generate Fe-N/C SACs that involves decomposition of aerosolized iron-phthalocyanines. The resulting catalyst displays ORR activity in acidic and alkaline electrolytes, with competitive half-potential and kinetic current density values in comparison with state-of-the-art electrocatalysts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dimensionality-driven metal-insulator transition in spin-orbit-coupled IrO2

  • Arias Egido E.
  • Laguna Marco M.A.
  • Piquer Oliet C.
  • Jiménez Cavero P.
  • Lucas del Pozo I.
  • Morellón Alquézar L.
  • Gallego F.
  • Rivera-Calzada A.
  • Cabero-Piris M.
  • Santamaria J.
  • Fabbris G.
  • Haskel D.
  • Boada R.
  • Díaz-Moreno S.
A metal-insulator transition is observed in spin-orbit-coupled IrO2 thin films upon reduction of the film thickness. In the epitaxially grown samples, the critical thickness (t ~ 1.5-2.2 nm) is found to depend on growth orientation (001), (100) or (110). Interestingly from the applied point of view, the insulating behavior is found even in polycrystalline ultrathin films. By analyzing the experimental electrical response with various theoretical models, we find good fits to the Efros-Shklovskii-VRH and the Arrhenius-type behaviors, which suggests an important role of electron correlations in determining the electrical properties of IrO2. Our magnetic measurements also point to a significant role of magnetic order. Altogether, our results would point to a mixed Slater- and Mott-type of insulator. © 2021 The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Low-temperature magnetic interactions in the “butterfly”-type {Fe3GdO2} compound: The persistence of magnetic chains

  • Rubín, J.
  • Arauzo, A.
  • Bartolomé, F.
  • Prodius, D.
  • Bartolomé, J.
Heat capacity measurements on the Ln = Gd case of the butterfly molecule series [Fe3Ln(μ3–O)2 (CCl3COO)8(H2O)(THF)3], in brief {Fe3LnO2}, are presented. In the previously studied {Fe3YO2} butterfly, where the magnetic properties stem only from the Fe3+ ions, magnetic chains of spin-5/2 Fe3Y clusters had been identified and described. The substitution of the nonmagnetic Y3+ ion by the magnetic Gd3+ adds magnetic interactions to the clusters, but not magnetic anisotropy. The heat capacity measurement shows an excess over the contribution of the antiferromagnetically coupled Fe3Gd magnetic clusters at very low temperature, which can be described as magnetic spin-1 chains using a Blume–Capel model. The intercluster interaction constant Jch=−55(5) mK is very similar to that of {Fe3YO2}, which shows that the interaction is mainly controlled by the magnitude of the cluster’s magnetic moment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Inhomogeneous probes for Bragg coherent diffraction imaging: Toward the imaging of dynamic and distorted crystals

  • Calvo-Almazán, I.
  • Chamard, V.
  • Grünewald, T. A.
  • Allain, M.
This paper proposes an innovative approach to improve Bragg coherent diffraction imaging (BCDI) microscopy applied to time evolving crystals and/or nonhomogeneous crystalline strain fields, identified as two major limitations of BCDI microscopy. Speckle BCDI (spBCDI), introduced here, rests on the ability of a strongly nonuniform illumination to induce a convolution of the three-dimensional (3D) frequency content associated with the finite-size crystal and a kernel acting perpendicularly to the illumination beam. In the framework of Bragg diffraction geometry, this convolution is beneficial as it encodes some 3D information about the sample in a single two-dimensional (2D) measurement, i.e., in the detector plane. With this approach, we demonstrate that we can drastically reduce the sampling frequency along the rocking curve direction and still obtain datasets with enough information to be inverted by a traditional phase retrieval algorithm. Numerical simulations, performed for a highly distorted crystal, show that spBCDI allows a gain in the sampling ratio ranging between 4 and 20 along the rocking curve scan, for a speckle illumination with individual speckle size of 50 nm at the sample position. Furthermore, spBCDI allows working at low intensity levels, leading to an additional gain for the total scanning time. Reductions of a factor of about 40 were numerically observed. Thus, full 3D datasets measured in the 0.2 s time scale at fourth-generation synchrotrons become feasible, with a remarkable potential for the imaging of strongly distorted crystals. Practical details on the implementation of the method are also discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Probing the tunability of magnetism with external pressure in metastable Sr2NiIrO6 double perovskite

  • Laguna-Marco, M.
  • Arias-Egido, E.
  • Cuartero, V.
  • Herrero-Albillos, J.
  • Kayser, P.
  • Alonso, J. A.
  • Fabbris, G.
  • Haskel, D.
  • Irifune, T.
In Sr2NiIrO6 long-range Ir-Ir antiferromagnetic exchange interactions have been reported to overcome the ferromagnetic Ni-Ir interactions hampering the otherwise expected ferromagnetic behavior. Prompted by this, a combination of x-ray absorption spectroscopy and x-ray diffraction at high pressure is used here to investigate the interplay between the magnetic structure of the Ir sublattice and lattice degrees of freedom. The compression of Sr2NiIrO6 drives an unexpected nonmonotonic change of the x-ray magnetic circular dichroism (XMCD) spectra: The intensity first decreases in the 0- to 18-GPa range, then shows an increase in the 18- to 30-GPa range and again decreases for higher pressures. The XMCD intensity, a measure of the net magnetization in the Ir sublattice, however, is found to remain very low in the whole pressure range so the observed changes do not correspond with a transition from antiferromagnetic to ferromagnetic or ferrimagnetic order. The evolution of the XMCD is better explained in terms of a weakening/strengthening of the long-range antiferromagnetic (AFM) Ir-Ir interaction between ferromagnetic planes associated with the reduction of the lattice parameters. In particular, a correlation can be established between the evolution of the b/a ratio and the weakening/strengthening of the AFM interaction. © 2022 American Physical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Insights into strain change of calcite by imaging defect-driven dissolution in the presence of Pb2+

  • Suzana, Ana F.
  • Lee, Sang Soo
  • Calvo-Almazán, Irene
  • Cha, Wonsuk
  • Harder, Ross
  • Fenter, Paul
The presence of microscopic strain can determine the macroscopic properties of crystalline structures. However, the capability of quantifying and imaging strain variations in particles undergoing chemical reactions remains limited. Here, we exploit the ability of three-dimensional (3D) Bragg Coherent Diffraction Imaging (BCDI) to capture changes in the 3D strain maps and morphology of individual calcite (calcium carbonate, CaCO3) particles before and after dissolution in a lead-containing aqueous solution at pH 3.7. BCDI reconstructions show that calcite dissolution occurs preferentially at tensile-strained regions near macrosteps. This observation demonstrates that the local reactivity of calcite (i.e., as measured by the spatial distribution of its dissolution rate) is influenced by pre-existing strains for as-grown calcite nanocrystals. Additional studies will be required to develop a predictive understanding of the strain–reactivity relationship.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Imaging surface topography with coherent x-ray reflectivity: Theory, kinematics, and simulations

  • Calvo-Almazán, Irene
  • Das, Anusheela
  • Suzana, Ana F.
  • Bartolomé, Fernando
  • Fenter, Paul
A theoretical formalism is described for understanding coherent x-ray reflectivity (CXR) from the surface of a semi-infinite crystal having a variable surface topography, described by the height profile h(x, y). The surface topography is imaged as a complex “effective density,” obtained from the phasing and inversion of the coherent x-ray reflectivity data, measured through a rocking scan centered at a vertical momentum transfer Q0 z and a vertical range Qz. The formalism predicts that the effective density has an amplitude with a maximum located at the surface height for each position within the surface plane. The phase of the effective density has a lateral variation that is controlled by the surface height and a vertical variation that reflects a combination of the interfacial structure and specific choice of measurement conditions. This understanding enables direct observation of nanometer-scale interfacial topography, i.e., h(x, y)cs (where cs is the vertical substrate lattice parameter) with Å-scale sensitivity to surface height. Numerical simulations illustrate and confirm the theoretical results. These results show how the interpretation of the interfacial density phase obtained by CXR data inversion (i.e., surface topography with respect to a flat surface) is conceptually similar to that previously known for Bragg coherent diffraction imaging (BCDI) measurements of isolated nanoparticles (i.e., lattice displacements with respect to an ideal crystal lattice). This suggests that CXR can be thought of as a form of dark field imaging with respect to the bright field BCDI approach. An implication of these results is that interfacial imaging may bypass some of the significant challenges associated with BCDI imaging of multiple particles having different orientations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Coherent x-ray interfacial imaging of microparticles and extended surfaces

  • Das, Anusheela
  • Calvo-Almazán, Irene
  • Suzana, Ana
  • Wanhala, Anna
  • Leake, Steven
  • Fenter, Paul
Understanding the role of interfacial topography and defects in controlling reactivity remains incomplete because of the difficulty in imaging interfacial topography with nanometric spatial resolution. Here we demonstrate the feasibility of imaging, in three dimensions, the surface topography of calcite (CaC⁢O3) using coherent x-ray reflectivity (CXR). While these images have a vertical resolution of ∼30 nm, we show that the phase of the interfacial density provides sub-nm sensitivity to the interfacial topography, a ∼100-fold enhancement with respect to resolution limits. This is achieved by extending the concepts of Bragg coherent diffraction imaging (BCDI) to CXR, revealing surfaces with nearly atomically flat and micron-scale topographies. It is demonstrated for surfaces of individual µm-sized particles and extended crystals, including free surfaces and buried interfaces.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Surface Deposition Induced Reduction of the Ground State Spin in Cr10 Wheel

  • Bartolome, Elena|||0000-0001-5108-0977
  • Ferrari, Ludovica
  • Sedona, Francesco|||0000-0002-7225-9498
  • Arauzo, Ana|||0000-0002-5999-341X
  • Rubín, Javier|||0000-0003-1029-3751
  • Luzón, Javier|||0000-0002-9208-0807
  • Herrero-Albillos, Julia|||0000-0002-0901-8341
  • Panighel, Mirco|||0000-0001-8413-5196
  • Mugarza, Aitor|||0000-0002-2698-885X
  • Rancan, Marzio|||0000-0001-9967-5283
  • Sambi, Mauro|||0000-0002-7105-4001
  • Armelao, Lidia
  • Bartolomé, Juan
  • Bartolomé, Fernando|||0000-0002-0047-1772
We report the deposition of monolayers and multilayers of {Cr(OMe)(OCCMe)} wheels, hereafter {Cr}, onto Au(111) and Cu(111) single-crystal substrates, and their characterization combining scanning tunneling microscopy, X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, X-ray natural linear dichroism, and X-ray magnetic circular dichroism (XMCD). {Cr} in bulk shows axial magnetic anisotropy and a cluster total spin S = 9 ground state, stemming from an interaction scheme of two semi-crowns containing four Cr ions interacting ferromagnetically, separated by two Cr antiferromagnetically coupled. The one-monolayer (1ML) samples of {Cr} sublimated on Ag(111) and Cu(111) show slightly different applied magnetic field dependence of XMCD signal. The field-dependence of the magnetization evolves from a lower curve for the 1ML {Cr} samples to a curve resembling the bulk one as the number of layers is increased, as shown in a 14ML sample. Monte Carlo simulations allow rationalizing the magnetization curves of the 1ML samples in terms of a reduction of the cluster ground-state total spin, S = 3 or S = 6, as a consequence of variations in the intra-wheel coupling interactions induced by the on-surface deposition. The sensitivity of the magnetic configuration of {Cr} to minor distortions of the intramolecular conformation might be exploited to control magnetism by external stimuli for applications.