Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 40
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Experimental study of a novel three-fluids heat exchanger embedded with phase change materials for cooling applications

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Vérez, David
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Phase change material selection for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Gasia, Jaume
  • Oró Prim, Eduard
  • Cabeza, Luisa F.
Within the framework of HYBUILD, an EU Horizon 2020-funded project, two innovative compact hybrid electrical/thermal storage systems for stand-alone and district connected residential buildings will be developed and tested in three demos located in Spain, France, and Cyprus. One of the innovative systems is aimed to be placed in buildings located in Mediterranean climate regions, where cooling loads are dominant, while the other system is intended for Continental climate regions, where the heating demand is dominant. Each system will include, among others components such as a sorption storage system and domestic hot water tanks, a latent thermal energy storage (LTES) system that will be connected to a heat pump through an innovative heat exchanger made of aluminium and filled with phase change material (PCM). In both cases, the heat pump works with electricity provided by a photovoltaic system that is, at the same time, connected to an electrical storage battery. The aim of using the LTES system is to enhance the use of solar energy, which will be translated into a reduction of the building energy consumption and related costs. This study focuses on the selection of the most suitable PCM to be used in each system. On the one hand, the LTES system of the Mediterranean system will be used to store cold to reduce the cooling demand. Taking into account that, according to the design parameters, the heat pump will require a refrigerant evaporation temperature around 2 ºC, and the building cooling system will require water supply in the range from 7 ºC to 12 ºC, the PCM melting temperature range should be within 0 ºC and 7 ºC. On the other hand, the LTES system of the Continental system will be used to store heat to reduce the domestic hot water (DHW) demand. The LTES will be located at the compressor outlet and will be charged by the hot refrigerant that exits the compressor at temperatures as high as 120 ºC. During the discharge process, the heat stored in the LTES will be supplied to the DHW at a temperature in the range between 50 ºC to 55 ºC. As a consequence, the range for the PCM melting temperature investigated in this case should be between 62 ºC and 68 ºC. Besides the melting temperature, other selection criteria considered include the PCM melting enthalpy and melting range, maximum allowed working temperature, density, thermal conductivity, availability, cost, and compatibility with aluminium. To decide the ideal PCM candidate for each system, a decision matrix was defined and used, by applying a weighted score to the selection criteria items according to their importance. The preliminary results indicate that for the Mediterranean system the best candidate is the commercial savE OM3 PCM, while for the Continental system, another commercial product PureTemp 63 is the most adequate option., This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

HYBUILD project in a nutshell

  • Pascale, Carmine
  • Zsembinszki, Gabriel
  • Morata, M.
  • Decorme, Régis
  • Barrère, C.
  • Frazzica, Andrea
  • Palomba, Valeria
  • Emhofer, Johann
  • Barz, Tilman
  • Cabeza, Luisa F.
• HYBUILD project develops innovative fully‐integrated components for hybrid electric/thermal storage solutions at domestic level • The developed solutions were optimized for both heating and cooling applications. Three demo sites have been used to validate the solutions • The full‐scale systems were successfully tested under lab‐controlled conditions but the partnership agrees that further research is needed for full market exploitation of the entire systems • Market exploitation of the entire system requires specific Business models to be developed among the entire partnership, single exploitable results are already mature for market exploitation
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Integration of a compact two fluid PCM heat exchanger into the hot superheated section of an air source heat pump cycle for optimized DHW generation

  • Emhofer, Johann
  • Barz, Tilman
  • Marx, Klemens
  • Hochwallner, Felix
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Weiss, Michael
This contribution presents a concept for the direct integration of a refrigerant/water Heat Exchanger (HEX) with a Phase Change Material (PCM) in the hot superheated section of an R32 - air source compression Heat Pump (HP) cycle, for optimized Domestic Hot Water (DHW) generation in multi-family houses. The concept takes advantage of the PCMs high thermal storage capacity integrated into a high performance compact enhanced plate-and-fin aluminium HEX. On the refrigerant side, it works as a de-superheater for DHW generation during heating and cooling operation whereas the process water is connected to decentralized DHW storages located in single apartments of a low energy building. We present results from simulations at a system level for typical operating conditions and corresponding seasonal and annual performances. Compared to conventional systems, the results indicate savings up to 11% of electric energy over the year for DHW generation in average climate., The authors thank C. Köfinger, M. Lauermann, W. Pink and A. Zottl for critical discussion.This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Phase change materials: is it still the starring technology of thermal energy storage? Current applications, perspectives and research gaps

  • Cabeza, Luisa F.
  • Borri, Emiliano
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Economia y Competitividad (TIN2015-71799-C2-2-P (MINECO/FEDER)), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PCI2020-120695-2 through PCI call), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945) and EuNightCat20 (954506). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

HYBUILD project in a nutshell

  • Zsembinszki, Gabriel
  • Morata, M.
  • Frazzica, Andrea
  • Palomba, Valeria
  • Emhofer, Johann
  • Barz, Tilman
  • Cabeza, Luisa F.
This is part of the project that has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824. The content of this document reflects only the author’s view and the Commission is not responsible for any use that may be made of the information it contains.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Contribución de proyectos europeos a la reducción del consumo de energía en aplicaciones en edificios y en la industria

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Fernández, Ángel G.
  • Argelich Romà, Josep
El grupo de investigación GREiA de la Universidad de Lleida, España, participa actualmente en seis proyectos financiados por la Comisión Europea a través del programa de investigación e innovación Horizonte 2020, cuyo principal objetivo es la reducción del consumo de energía y la mejora de la eficiencia energética en los sectores de la edificación y la industria. Se trata de los proyectos Innova MicroSolar, HYBUILD, SWS-HEATING, SolBio-Rev, InhibiTES y REHIB. Los primeros cuatro proyectos desarrollarán sistemas innovadores de aprovechamiento de la energía solar tales como colectores Fresnel, paneles fotovoltaicos, o colectores de vacío, combinados con equipos eficientes de generación de calor, frío o electricidad, así como sistemas de almacenamiento de energía térmica y/o eléctrica. El proyecto InhibiTES se centrará en el estudio del uso de sales fundidas de cloruros como material de almacenamiento de energía en centrales de concentración solar de torre. Finalmente, el proyecto REHIB desarrollará una herramienta de toma de decisiones para guiar a los arquitectos e ingenieros hacia la integración de tecnologías de energía renovable en edificios históricos., El grupo de investigación GREiA de la Universidad de Lleida, España, participa actualmente en seis proyectos financiados por la Comisión Europea a través del programa de investigación e innovación Horizonte 2020, cuyo principal objetivo es la reducción del consumo de energía y la mejora de la eficiencia energética en los sectores de la edificación y la industria. Se trata de los proyectos Innova MicroSolar, HYBUILD, SWS-HEATING, SolBio-Rev, InhibiTES y REHIB.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Phenomenological modelling of solid/liquid phase transitions in non-ideal PCM

  • Barz, Tilman
  • Emhofer, Johann
  • Marx, Klemens
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Thermal energy storage technologies through solid/liquid phase change materials (PCMs) use the thermodynamic principles of melting and solidification to absorb and release thermal energy. In the ideal case, this technology allows to charge and discharge relatively high amounts of thermal energy at a constant, unique temperature. However, for most commercially available technicalgrade solid/liquid PCMs melting and solidification cannot be assigned to a single, unique temperature. Instead, the phase transition takes place over a temperature range in which solid and liquid phases coexist. Moreover, supercooling sometimes causes hysteresis in the phase transitions depending on the applied heating and cooling rates. These phenomena cause non-ideal phase transition behaviour and generally reduce the applicability of the PCMs. PCM models which can reproduce this non-ideal behaviour are crucial for the numerical analysis of the charging and discharging operation of latent heat storages. This contribution presents a generic workflow for the identification of phase transition models for industrial-grade solid/liquid PCMs. Adopting a purely phenomenological approach models are directly identified from PCM heat capacity measurement data. Thus, if the data contains information on temperature ranges with coexisting phases and hysteresis in the temperature induced phase transitions these phenomena are directly accounted for. The identified transition models predict liquid mass phase fractions using PCM temperature as a model input. These models are then used to describe apparent (effective) PCM properties in the phase transition temperature range, i.e. specific heat, density and thermal conductivity. Applications of the workflow are presented for different commercial PCMs from Climator Sweden AB. The effects of non-ideal phase transition behaviour on absorption and release of heat in a latent thermal energy storage are discussed by simulation studies., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

State of art of PCM for air conditioning and refrigeration

  • Cabeza, Luisa F.
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: Propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: Improve existing knowledge through research and innovation ; Help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects, HYBUILD (768824), SWS-HEATING (764025). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Methods for the determination of the state-of-charge of a thermal energy storage device

  • Zsembinszki, Gabriel
  • Vérez, David
  • Mselle, Boniface Dominick
  • Borri, Emiliano
  • Luisa F. Cabeza
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Experimental evaluation of a heat pump-latent storage system for increasing renewable share of the residential stock

  • Palomba, Valeria
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Barmparitsas, Nikolaos
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Leontaritis, Aris
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
  • Strehlow, Andreas
The HYBUILD project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement n° 768824.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Energia renovable, nova economia i abandonament o reforçament dels petits municipis

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gasa, Gemma
Aquest treball està parcialment finançat pel Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 (FEDER)), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), y Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya i és co-finançat per la Unió Europea a través del Fons Europeu de Desenvolupament Regional (FEDER) (2019PROD00101). També s’ha rebut finançament de l’Horitzo 2020 de l’Unió Europea dins de programes de recerca i innovació amb els projectes Innova MicroSOLAR (723596), HYBUILD (768824), SWSHEATING (764025), SolBio-Rev (814945) i CSPplus (Cofund ERA-NET Action, N° 838311). Agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2017 SGR 1537) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Dynamic Modelling of a Hybrid Solar Thermal/electric Energy Storage System for Application in Residential Buildings

  • Frazzica, Andrea
  • Palomba, Valeria
  • Sergi, Francesco
  • Ferraro, Marco
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Oró Prim, Eduard
  • Karellas, Sotirios
  • Varvagiannis, Efstratios
  • Emhofer, Johann
  • Barz, Tilman
The present paper presents the dynamic modelling of a hybrid thermal/electric energy storage for residential applications. Two systems are considered, which are suitable for application in Continental and Mediterranean climates. Both systems are suitable for the provision of heating, cooling and domestic hot water, but the Continental system is optimized for heating and domestic hot water production, whereas the Mediterranean system is optimized for the covering of cooling demands. The models are realized in Dymola/Modelica environment and are structured according to a modular approach, using only self-developed components or open source libraries. An adsorption module, used for thermal energy storage purposes, a battery pack, used for electrical storage, latent heat storages and heat pumps are the main components modelled. The integration in sub-system and the typical operation during one day under reference conditions are shown, which prove the successful integration of several sub-modules., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Experimental comparison of small-scale and full-scale latent storage for integration in efficient heat pumps

  • Palomba, Valeria
  • Mselle, Boniface Dominick
  • Vérez, David
  • Borri, Emiliano
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Strehlow, Andreas
  • Barmparitsas, Nikolaos
  • Leontaritis, Aris
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Zsembinszki, Gabriel
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

ALMIA Educativa as an educational strategy towards an effective energy transition of a rural village

  • Arco Bravo, Isabel del
  • Ramos Pla, Anabel
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
The 2030 Agenda for Sustainable Development [1] was adopted in 2015 by the United Nations (UN) and its member states with the main objective of providing a path to protect the planet from degradation and to people prosperity and world peace. A total of 17 Sustainable Development Goals (SDGs) are included in the agenda, with specific targets and actions to achieve this ambitious overarching goal. In Sustainable Development the person is key for policies and efforts to improve conditions in each social context. The three key aspects to consider are: (i) the promotion of remote human and socially equitable development for all humanity based on inclusion, (ii) the guidance of economic development at the service of human development, and finally, (iii) the promotion of responsible use of the planet’s natural resources [2]. The fast growth of population in large urban areas is expected to generate or aggravate many problems related to citizen insecurity, energy and water supply, excessive production and over-consumption, waste generation, etc. At the same time, access to affordable, reliable, sustainable, and modern energy for all people living in rural areas must be ensured. Education is a fundamental tool to build sustainable societies actively involving all citizens in the sustainable development. The objective of this paper is to describe the ALMIA project as a strategic plan for the transformation of a small village called Almatret (Catalonia, Spain) towards sustainable development as a net positive energy and sustainable village, aligned with the implementation of the 17 SDGs. This paper focuses on ALMIA Educativa as an educational strategy to make the energy transition effective in the rural village., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 and under the grant agreement No 723596. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Almatret municipality for their involvement in this challenging project.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Life cycle assessment of an innovative hybrid energy storage system for residential buildings

  • Llantoy, Noelia
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Acknowledgements ThisprojecthasreceivedfundingfromtheEuropeanUnion’sHorizon2020researchandinnovationprogrammeundergrantagreementNo768824(HYBUILD).ThisworkispartiallyfundedbytheMinisteriodeCiencia,InnovaciónyUniversidadesdeEspaña(RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE)andtheMinisteriodeCiencia,InnovaciónyUniversidades-AgenciaEstataldeInvestigación(AEI)(RED2018-102431-T).TheauthorswouldliketothanktheCatalanGovernmentforthequalityaccreditationgiventotheirresearchgroup(2017SGR1537).GREiAisacertifiedagentTECNIOinthecategoryoftechnologydevelopersfromtheGovernmentofCatalonia.ThisworkispartiallysupportedbyICREAundertheICREAAcademiaprogramme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of an innovative compact hybrid electrical-thermal storage system for residential buildings in Mediterranean climate

  • Palomba, Valeria
  • Llantoy, Noelia
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
The buildings sector accounts for around 40% of the total energy demand worldwide and is therefore paramount to reduce its environmental impact. Accordingly, the use of renewable energy sources coupled with energy storage systems in buildings has been widely investigated in the last years and different solutions for cooling, heating and domestic hot water have been proposed, with the aim of reducing the building electrical consumption needed to keep comfort conditions. This study investigates the environmental impact of an innovative system proposed for residential buildings in the Mediterranean climate through a life cycle assessment. Results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849- B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Experimental evaluation of a heat pump-latent storage system for increasing renewable share of the residential stock

  • Palomba, Valeria
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Barmparitsas, Nikolaos
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Leontaritis, Aris
  • Strehlow, Andreas
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
In the present work, the integration of a three-fluids heat exchanger in the evaporator of a reversible heat pump is evaluated. The heat exchanger includes internally finned passages for the refrigerant of the heat pump cycle and for the heat transfer fluid (water/glycol mixture) and externally finned passages for Phase Change Material (PCM). The selected PCM is a commercial paraffin (RT4) with nominal melting point of 4°C. The operation of the integrated heat pump with latent storage under typical cooling season conditions in Mediterranean warm climates were evaluated through an experimental campaign at CNR. The effect of operating modes and operational conditions was identified. During charge, the variable speed of the compressor was found to yield the maximum effect on storage dynamics, whereas during discharge the prevalent effect is that of the heat transfer fluid flow rate. Based on the outcomes of measurement, a critical design review and control strategy improvement were carried out., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of an innovative compact hybrid electrical-thermal storage system for residential buildings in Mediterranean climate

  • Palomba, Valeria
  • Llantoy, Noelia
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
The buildings sector accounts for around 40% of the total energy demand worldwide and is therefore paramount to reduce its environmental impact. Accordingly, the use of renewable energy sources coupled with energy storage systems in buildings has been widely investigated in the last years and different solutions for cooling, heating and domestic hot water have been proposed, with the aim of reducing the building electrical consumption needed to keep comfort conditions. This study investigates the environmental impact of an innovative system proposed for residential buildings in the Mediterranean climate through a life cycle assessment. Results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849- B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Methods for the determination of the state-of-charge of a thermal energy storage device

  • Zsembinszki, Gabriel
  • Vérez, David
  • Mselle, Boniface Dominick
  • Borri, Emiliano
  • Luisa F. Cabeza
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Experimental comparison of small-scale and full-scale latent storage for integration in efficient heat pumps

  • Palomba, Valeria
  • Mselle, Boniface Dominick
  • Vérez, David
  • Borri, Emiliano
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Strehlow, Andreas
  • Barmparitsas, Nikolaos
  • Leontaritis, Aris
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Zsembinszki, Gabriel
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Energia renovable, nova economia i abandonament o reforçament dels petits municipis

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gasa, Gemma
Aquest treball està parcialment finançat pel Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 (FEDER)), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), y Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya i és co-finançat per la Unió Europea a través del Fons Europeu de Desenvolupament Regional (FEDER) (2019PROD00101). També s’ha rebut finançament de l’Horitzo 2020 de l’Unió Europea dins de programes de recerca i innovació amb els projectes Innova MicroSOLAR (723596), HYBUILD (768824), SWSHEATING (764025), SolBio-Rev (814945) i CSPplus (Cofund ERA-NET Action, N° 838311). Agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2017 SGR 1537) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

State of art of PCM for air conditioning and refrigeration

  • Cabeza, Luisa F.
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: Propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: Improve existing knowledge through research and innovation ; Help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects, HYBUILD (768824), SWS-HEATING (764025). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Phase change materials: is it still the starring technology of thermal energy storage? Current applications, perspectives and research gaps

  • Cabeza, Luisa F.
  • Borri, Emiliano
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Economia y Competitividad (TIN2015-71799-C2-2-P (MINECO/FEDER)), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PCI2020-120695-2 through PCI call), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945) and EuNightCat20 (954506). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Experimental evaluation of a heat pump-latent storage system for increasing renewable share of the residential stock

  • Palomba, Valeria
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Barmparitsas, Nikolaos
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Leontaritis, Aris
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
  • Strehlow, Andreas
The HYBUILD project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement n° 768824.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Life cycle assessment of an innovative hybrid energy storage system for residential buildings

  • Llantoy, Noelia
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Acknowledgements ThisprojecthasreceivedfundingfromtheEuropeanUnion’sHorizon2020researchandinnovationprogrammeundergrantagreementNo768824(HYBUILD).ThisworkispartiallyfundedbytheMinisteriodeCiencia,InnovaciónyUniversidadesdeEspaña(RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE)andtheMinisteriodeCiencia,InnovaciónyUniversidades-AgenciaEstataldeInvestigación(AEI)(RED2018-102431-T).TheauthorswouldliketothanktheCatalanGovernmentforthequalityaccreditationgiventotheirresearchgroup(2017SGR1537).GREiAisacertifiedagentTECNIOinthecategoryoftechnologydevelopersfromtheGovernmentofCatalonia.ThisworkispartiallysupportedbyICREAundertheICREAAcademiaprogramme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Phenomenological modelling of solid/liquid phase transitions in non-ideal PCM

  • Barz, Tilman
  • Emhofer, Johann
  • Marx, Klemens
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Thermal energy storage technologies through solid/liquid phase change materials (PCMs) use the thermodynamic principles of melting and solidification to absorb and release thermal energy. In the ideal case, this technology allows to charge and discharge relatively high amounts of thermal energy at a constant, unique temperature. However, for most commercially available technicalgrade solid/liquid PCMs melting and solidification cannot be assigned to a single, unique temperature. Instead, the phase transition takes place over a temperature range in which solid and liquid phases coexist. Moreover, supercooling sometimes causes hysteresis in the phase transitions depending on the applied heating and cooling rates. These phenomena cause non-ideal phase transition behaviour and generally reduce the applicability of the PCMs. PCM models which can reproduce this non-ideal behaviour are crucial for the numerical analysis of the charging and discharging operation of latent heat storages. This contribution presents a generic workflow for the identification of phase transition models for industrial-grade solid/liquid PCMs. Adopting a purely phenomenological approach models are directly identified from PCM heat capacity measurement data. Thus, if the data contains information on temperature ranges with coexisting phases and hysteresis in the temperature induced phase transitions these phenomena are directly accounted for. The identified transition models predict liquid mass phase fractions using PCM temperature as a model input. These models are then used to describe apparent (effective) PCM properties in the phase transition temperature range, i.e. specific heat, density and thermal conductivity. Applications of the workflow are presented for different commercial PCMs from Climator Sweden AB. The effects of non-ideal phase transition behaviour on absorption and release of heat in a latent thermal energy storage are discussed by simulation studies., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

HYBUILD project in a nutshell

  • Pascale, Carmine
  • Zsembinszki, Gabriel
  • Morata, M.
  • Decorme, Régis
  • Barrère, C.
  • Frazzica, Andrea
  • Palomba, Valeria
  • Emhofer, Johann
  • Barz, Tilman
  • Cabeza, Luisa F.
• HYBUILD project develops innovative fully‐integrated components for hybrid electric/thermal storage solutions at domestic level • The developed solutions were optimized for both heating and cooling applications. Three demo sites have been used to validate the solutions • The full‐scale systems were successfully tested under lab‐controlled conditions but the partnership agrees that further research is needed for full market exploitation of the entire systems • Market exploitation of the entire system requires specific Business models to be developed among the entire partnership, single exploitable results are already mature for market exploitation
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

ALMIA Educativa as an educational strategy towards an effective energy transition of a rural village

  • Arco Bravo, Isabel del
  • Ramos Pla, Anabel
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
The 2030 Agenda for Sustainable Development [1] was adopted in 2015 by the United Nations (UN) and its member states with the main objective of providing a path to protect the planet from degradation and to people prosperity and world peace. A total of 17 Sustainable Development Goals (SDGs) are included in the agenda, with specific targets and actions to achieve this ambitious overarching goal. In Sustainable Development the person is key for policies and efforts to improve conditions in each social context. The three key aspects to consider are: (i) the promotion of remote human and socially equitable development for all humanity based on inclusion, (ii) the guidance of economic development at the service of human development, and finally, (iii) the promotion of responsible use of the planet’s natural resources [2]. The fast growth of population in large urban areas is expected to generate or aggravate many problems related to citizen insecurity, energy and water supply, excessive production and over-consumption, waste generation, etc. At the same time, access to affordable, reliable, sustainable, and modern energy for all people living in rural areas must be ensured. Education is a fundamental tool to build sustainable societies actively involving all citizens in the sustainable development. The objective of this paper is to describe the ALMIA project as a strategic plan for the transformation of a small village called Almatret (Catalonia, Spain) towards sustainable development as a net positive energy and sustainable village, aligned with the implementation of the 17 SDGs. This paper focuses on ALMIA Educativa as an educational strategy to make the energy transition effective in the rural village., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 and under the grant agreement No 723596. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Almatret municipality for their involvement in this challenging project.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Experimental study of a novel three-fluids heat exchanger embedded with phase change materials for cooling applications

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Vérez, David
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Phase change material selection for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Gasia, Jaume
  • Oró Prim, Eduard
  • Cabeza, Luisa F.
Within the framework of HYBUILD, an EU Horizon 2020-funded project, two innovative compact hybrid electrical/thermal storage systems for stand-alone and district connected residential buildings will be developed and tested in three demos located in Spain, France, and Cyprus. One of the innovative systems is aimed to be placed in buildings located in Mediterranean climate regions, where cooling loads are dominant, while the other system is intended for Continental climate regions, where the heating demand is dominant. Each system will include, among others components such as a sorption storage system and domestic hot water tanks, a latent thermal energy storage (LTES) system that will be connected to a heat pump through an innovative heat exchanger made of aluminium and filled with phase change material (PCM). In both cases, the heat pump works with electricity provided by a photovoltaic system that is, at the same time, connected to an electrical storage battery. The aim of using the LTES system is to enhance the use of solar energy, which will be translated into a reduction of the building energy consumption and related costs. This study focuses on the selection of the most suitable PCM to be used in each system. On the one hand, the LTES system of the Mediterranean system will be used to store cold to reduce the cooling demand. Taking into account that, according to the design parameters, the heat pump will require a refrigerant evaporation temperature around 2 ºC, and the building cooling system will require water supply in the range from 7 ºC to 12 ºC, the PCM melting temperature range should be within 0 ºC and 7 ºC. On the other hand, the LTES system of the Continental system will be used to store heat to reduce the domestic hot water (DHW) demand. The LTES will be located at the compressor outlet and will be charged by the hot refrigerant that exits the compressor at temperatures as high as 120 ºC. During the discharge process, the heat stored in the LTES will be supplied to the DHW at a temperature in the range between 50 ºC to 55 ºC. As a consequence, the range for the PCM melting temperature investigated in this case should be between 62 ºC and 68 ºC. Besides the melting temperature, other selection criteria considered include the PCM melting enthalpy and melting range, maximum allowed working temperature, density, thermal conductivity, availability, cost, and compatibility with aluminium. To decide the ideal PCM candidate for each system, a decision matrix was defined and used, by applying a weighted score to the selection criteria items according to their importance. The preliminary results indicate that for the Mediterranean system the best candidate is the commercial savE OM3 PCM, while for the Continental system, another commercial product PureTemp 63 is the most adequate option., This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Dynamic Modelling of a Hybrid Solar Thermal/electric Energy Storage System for Application in Residential Buildings

  • Frazzica, Andrea
  • Palomba, Valeria
  • Sergi, Francesco
  • Ferraro, Marco
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Oró Prim, Eduard
  • Karellas, Sotirios
  • Varvagiannis, Efstratios
  • Emhofer, Johann
  • Barz, Tilman
The present paper presents the dynamic modelling of a hybrid thermal/electric energy storage for residential applications. Two systems are considered, which are suitable for application in Continental and Mediterranean climates. Both systems are suitable for the provision of heating, cooling and domestic hot water, but the Continental system is optimized for heating and domestic hot water production, whereas the Mediterranean system is optimized for the covering of cooling demands. The models are realized in Dymola/Modelica environment and are structured according to a modular approach, using only self-developed components or open source libraries. An adsorption module, used for thermal energy storage purposes, a battery pack, used for electrical storage, latent heat storages and heat pumps are the main components modelled. The integration in sub-system and the typical operation during one day under reference conditions are shown, which prove the successful integration of several sub-modules., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Integration of a compact two fluid PCM heat exchanger into the hot superheated section of an air source heat pump cycle for optimized DHW generation

  • Emhofer, Johann
  • Barz, Tilman
  • Marx, Klemens
  • Hochwallner, Felix
  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Strehlow, Andreas
  • Nitsch, Birgo
  • Weiss, Michael
This contribution presents a concept for the direct integration of a refrigerant/water Heat Exchanger (HEX) with a Phase Change Material (PCM) in the hot superheated section of an R32 - air source compression Heat Pump (HP) cycle, for optimized Domestic Hot Water (DHW) generation in multi-family houses. The concept takes advantage of the PCMs high thermal storage capacity integrated into a high performance compact enhanced plate-and-fin aluminium HEX. On the refrigerant side, it works as a de-superheater for DHW generation during heating and cooling operation whereas the process water is connected to decentralized DHW storages located in single apartments of a low energy building. We present results from simulations at a system level for typical operating conditions and corresponding seasonal and annual performances. Compared to conventional systems, the results indicate savings up to 11% of electric energy over the year for DHW generation in average climate., The authors thank C. Köfinger, M. Lauermann, W. Pink and A. Zottl for critical discussion.This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Experimental evaluation of a heat pump-latent storage system for increasing renewable share of the residential stock

  • Palomba, Valeria
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Barmparitsas, Nikolaos
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Leontaritis, Aris
  • Strehlow, Andreas
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
In the present work, the integration of a three-fluids heat exchanger in the evaporator of a reversible heat pump is evaluated. The heat exchanger includes internally finned passages for the refrigerant of the heat pump cycle and for the heat transfer fluid (water/glycol mixture) and externally finned passages for Phase Change Material (PCM). The selected PCM is a commercial paraffin (RT4) with nominal melting point of 4°C. The operation of the integrated heat pump with latent storage under typical cooling season conditions in Mediterranean warm climates were evaluated through an experimental campaign at CNR. The effect of operating modes and operational conditions was identified. During charge, the variable speed of the compressor was found to yield the maximum effect on storage dynamics, whereas during discharge the prevalent effect is that of the heat transfer fluid flow rate. Based on the outcomes of measurement, a critical design review and control strategy improvement were carried out., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Contribución de proyectos europeos a la reducción del consumo de energía en aplicaciones en edificios y en la industria

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gracia Cuesta, Alvaro de
  • Fernández, Ángel G.
  • Argelich Romà, Josep
El grupo de investigación GREiA de la Universidad de Lleida, España, participa actualmente en seis proyectos financiados por la Comisión Europea a través del programa de investigación e innovación Horizonte 2020, cuyo principal objetivo es la reducción del consumo de energía y la mejora de la eficiencia energética en los sectores de la edificación y la industria. Se trata de los proyectos Innova MicroSolar, HYBUILD, SWS-HEATING, SolBio-Rev, InhibiTES y REHIB. Los primeros cuatro proyectos desarrollarán sistemas innovadores de aprovechamiento de la energía solar tales como colectores Fresnel, paneles fotovoltaicos, o colectores de vacío, combinados con equipos eficientes de generación de calor, frío o electricidad, así como sistemas de almacenamiento de energía térmica y/o eléctrica. El proyecto InhibiTES se centrará en el estudio del uso de sales fundidas de cloruros como material de almacenamiento de energía en centrales de concentración solar de torre. Finalmente, el proyecto REHIB desarrollará una herramienta de toma de decisiones para guiar a los arquitectos e ingenieros hacia la integración de tecnologías de energía renovable en edificios históricos., El grupo de investigación GREiA de la Universidad de Lleida, España, participa actualmente en seis proyectos financiados por la Comisión Europea a través del programa de investigación e innovación Horizonte 2020, cuyo principal objetivo es la reducción del consumo de energía y la mejora de la eficiencia energética en los sectores de la edificación y la industria. Se trata de los proyectos Innova MicroSolar, HYBUILD, SWS-HEATING, SolBio-Rev, InhibiTES y REHIB.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

HYBUILD project in a nutshell

  • Zsembinszki, Gabriel
  • Morata, M.
  • Frazzica, Andrea
  • Palomba, Valeria
  • Emhofer, Johann
  • Barz, Tilman
  • Cabeza, Luisa F.
This is part of the project that has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824. The content of this document reflects only the author’s view and the Commission is not responsible for any use that may be made of the information it contains.