Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

&apos, Ion-freeze&apos, efficiency in perovskite solar cells: time scales for ion immobilization

  • Balaguera, Enrique H.
  • Marinelli Pra, F. Javier
  • Das, Chittaranjan
  • Torresani, Lorenzo
  • Saliba, Michael
  • Bisquert, Juan|||0000-0003-4987-4887
[EN] It is essential to shed light on the complex multiscale dynamics of mobile ions in perovskite solar cells for developing efficiency testing protocols, gaining a deeper understanding of the degradation mechanisms, improving long-term stability, and, ultimately, driving the commercialization of this technology. This study provides characteristic times for inhibiting the presence of mobile ions in efficiency measurements, enabling a comparison between `ion-freeze¿ and steady-state efficiencies to quantify ion-induced degradation losses. Using current transient analysis during current¿voltage measurements for a wide range of sweep rates, we achieve precise time-scale mapping of the complex ionic landscape of perovskites, spanning from ion immobilization (at time scales much shorter than the diffusion rate) to the equilibrium situation, encompassing the ubiquitous hysteresis effects for which we define a scan-rate range of occurrence. We corroborate the theory by using Impedance Spectroscopy. Our study provides valuable information about the intricate ionic dynamics in the context of classical current¿voltage measurements, supporting the integration of these complementary experiments into the foundational characterization practices of the perovskite photovoltaic community., This work has received funding from the Universidad Rey Juan Carlos, project numbers M3704 and M3712. J. Bisquert thank Grant EUR2022-134045 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Michael Saliba and Chittaranjan Das thank the German Research Foundation (DFG) for funding (SPP 2196, 431314977/GRK 2642). Michael Saliba also acknowledges funding from the European Research Council under the Horizon Europe Program (LOCAL-HEAT, Grant Agreement 101041809) and the German Bundesministerium für Bildung and Forschung (BMBF), project NETPEC (01LS2103E).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mitigating the amorphization of perovskite layers by using atomic layer deposition of alumina

  • Kedia, Mayank
  • Das, Chittaranjan
  • Kot, Malgorzata
  • Yalcinkaya, Yenal
  • Zuo, Weiwei
  • Tabah, Kenedy
  • Matvija, Peter
  • Ezquer, Mikel
  • Cornago, Iñaki
  • Hempel, Wolfram
  • Kauffmann, Florian
  • Plate, Paul
  • Lira-Cantú, Mónica
  • Weber, Stefan A.L.
  • Saliba, Michael
Atomic layer deposition of aluminum oxide (ALD-Al<inf>2</inf>O<inf>3</inf>) layers has recently been studied for stabilizing perovskite solar cells (PSCs) against environmental stressors, such as humidity and oxygen. In addition, the ALD-Al<inf>2</inf>O<inf>3</inf> layer acts as a protective barrier, mitigating pernicious halide ion migration from the perovskite towards the hole transport interface. However, its effectiveness in preventing the infiltration of ions and additives from the hole-transport layer into perovskites remains insufficiently understood. Herein, we demonstrate the deposition of a compact ultrathin (∼0.75 nm) ALD-Al<inf>2</inf>O<inf>3</inf> layer that conformally coats the morphology of a triple-cation perovskite layer. This promotes an effective contact of the hole transporter layer on top of the perovskite, thereby improving the charge carrier collection between these two layers. Upon systematically investigating the layer-by-layer structure of the PSC, we discovered that ALD-Al<inf>2</inf>O<inf>3</inf> also acts as a diffusion barrier for the degraded species from the adjacent transport layer into the perovskite. In addition to these protective considerations, ALD-Al<inf>2</inf>O<inf>3</inf> impedes the transition of crystalline perovskites to an undesired amorphous phase. Consequently, the dual functionality (i.e., enhanced contact and diffusion barrier) of the ALD-Al<inf>2</inf>O<inf>3</inf> protection enhanced the device performance from 19.1% to 20.5%, while retaining 98% of its initial performance compared to <10% for pristine devices after 1500 h of outdoor testing under ambient conditions. Finally, this study deepens our understanding of the mechanism of ALD-Al<inf>2</inf>O<inf>3</inf> as a two-way diffusion barrier, highlighting the multifaceted role of buffer layers in interfacial engineering for the long-term stability of PSCs., M. S., M. K., and C. D. thank Helmholtz Young Investigator Group FRONTRUNNER. M. S., Y. Y., and S. W. thank the German Research Foundation (DFG) for funding (SPP2196, 431314977/GRK 2642). M. S. and M. L. C. acknowledge the funding from ProperPhotoMile. Project ProperPhotoMile is supported under the umbrella of SOLARERA.NET co-funded by The Spanish Ministry of Science and Education and the AEI under Project PCI2020-112185 and CDTI Project IDI-20210171; the Federal Ministry for Economic Affairs and Energy based on a decision by the German Bundestag Projects FKZ 03EE1070B and FKZ 03EE1070A and the Israel Ministry of Energy with Project 220-11-031. SOLAR-ERA.NET is supported by the European Commission with the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET action number 786483), funded by the European Union. M. S. acknowledges funding from the European Research Council under the Horizon Europe Program (LOCAL-HEAT, Grant Agreement 101041809). M. S. acknowledges funding from the German Bundesministerium für Bildung and Forschung (BMBF), project “NETPEC” (01LS2103E). M. S. also acknowledges funding by the Deutsche Forschungsgemeinschaft (German Research Foundation) via the project “Correlating Defect Densities with Recombination Losses in Halide-Perovskite Solar Cells.” The authors gratefully acknowledge the core facility SRF AMICA (Stuttgart Research Focus Advanced Materials Innovation and Characterization) at the University of Stuttgart for their support and assistance. This research was supported by the German Research Foundation (DFG, AOBJ: 661806). M. Kot and P. P. acknowledge the funding from Zentrales Innovationsprogramm Mittelstand (ZIM), Federal Ministry of Economics and Climate Protection Project no KK5087602BR1. M. S., M. K., and C. D. acknowledge the CERIC-ERIC Consortium for access to experimental facilities and financial support (proposal number 20232163). P. M. is grateful for the partial financial support provided by the Czech Ministry of Education, Youth and Sports (project LM2023072). M. K. and M. S. also acknowledge the VIPERLAB project financed by the European Union's Horizon 2020 (grant agreement No. 101006715). M. K. thanks Eugenia Zugasti and Javier Diaz Berrade from CENER, Spain, for their assistance during the MPPT measurements. M. K. also acknowledges Ludwig Marth from SENTECH for technical assistance during ALD deposition., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tracing the Dynamic Chemical Transformations of Spiro-OMeTAD in Operating Perovskite Solar Cells

  • Das, Chittaranjan
  • Kedia, Mayank
  • Tanko, Kenedy T.
  • Wang, Yunshan
  • Njel, Christian
  • Lira-Cantú, Mónica
  • Saliba, Michael
A significant stability challenge for perovskite solar cells (PSCs) lies in the widely used LiTFSI-doped Spiro-OMeTAD (Spiro) hole transport layer (HTL), in n-i-p configured cells. In this study, we used the sputtering depth profile X-ray photoelectron spectroscopy (SDP-XPS) to systematically examine the cause of instability in n-i-p structured PSCs under shelf-life stability (SLS), open-circuit potential (OCP), and maximum power point tracking (MPPT) conditions. We discover dissociation of the spiro caused by the breakdown of LiTFSI under operational stress, which alters the p-type nature of the spiro and the interface band bending. Specifically, LiTFSI dissociation leads to the formation of byproducts, LiF and LiXSYOZ, across the HTL layer, which initiate the degradation of spiro molecules, especially under MPPT and OCP stress. While the band bending in the SLS device was around 0.6 eV, this dropped to about 0.4 eV in devices stressed by MPPT and OCP, leading to significant decreases in open-circuit voltage and fill factor. This degradation is more severe under OCP and MPPT conditions than under SLS. By providing complex interfacial and chemical insights, this study underscores the necessity for improved dopant stability and a better HTL design to enhance the durability of PSCs., The authors thank the German Research Foundation (DFG) for funding(SPP 2196/CREATIVE, 431314977/GRK 2642). The authors also acknowl-edge funding from the European Research Council under the HorizonEurope Program (LOCAL-HEAT, Grant Agreement 101041809) and theGerman Bundesministerium für Bildung und Forschung (BMBF), project“NETPEC” (01LS2103E). We acknowledge KNMFi for providing the XPSfacility for the experiments. Open access funding enabled and organized by Projekt DEAL., Peer reviewed