Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Market Value and Agents Benefits of Enhanced Short-Term Solar PV Power Generation Forecasting

  • Manso-Burgos, Álvaro
  • Ribó-Pérez, David Gabriel|||0000-0003-1089-5197
  • Gómez-Navarro, Tomás|||0000-0001-6114-2414
  • Mateo-Barcos, Sergio
  • Carnero, Pablo
[EN] Renewable energy sources such as PV solar or wind power are intermittent and non-dispatchable. Massive integration of these resources into the electric mix poses some challenges to meeting power generation with demand. Hence, improving power generation forecasting has raised much interest. This work assesses the market value of enhanced PV solar power generation forecasting. Then, we analyse the different agents present in the electricity system. We link the studied agents to the proposed market values based on both analyses. Improving the accuracy of RES forecasting has massive potential as the sector grows and new agents arise. It can have reactive values like reducing imbalances or proactive values such as participating in intraday markets or exercising energy arbitrage. However, accurate forecasting can also lead to opportunistic values that can be exploited by malicious agents if they are not adequately regulated., This research has been funded by the PURPOSED project (ref: PID2021-128822OB-I00), financed by the Spanish State Investigation Agency. This work was supported in part by the "Prognosis" project, part of the SOLAR-ERA.NET, with the support of the European Commission within the Horizon 2020 programme (Cofund ERA-NET Action, N degrees 691664 y N degrees 786483). At a national level, the Project is financed by the Programa Estatal de I+D+i Orientada a los Retos de la Sociedad in the framework of the Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 2017-2020, with reference PCI2018-093043, and also by the Instituto Valenciano de la Edificacion (IVE) and by the Catedra de Transicion Energetica Urbana (Las Naves-UPV).
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Recent progress in mixed a‐site cation halide perovskite thin‐films and nanocrystals for solar cells and light‐emitting diodes

  • Byranvand, Mahdi Malekshahi
  • Otero Martinez, Clara
  • Ye, Junzhi
  • Zuo, Weiwei
  • Manna, Liberato
  • Saliba, Michael
  • Hoye, Robert L. Z.
  • Polavarapu , Lakshminarayana
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Over the past few years, lead-halide perovskites (LHPs), both in the form of bulk thin films and colloidal nanocrystals (NCs), have revolutionized the field of optoelectronics, emerging at the forefront of next-generation optoelectronics. The power conversion efficiency (PCE) of halide perovskite solar cells has increased from 3.8% to over 25.7% over a short period of time and is very close to the theoretical limit (33.7%). At the same time, the external quantum efficiency (EQE) of perovskite LEDs has surpassed 23% and 20% for green and red emitters, respectively. Despite great progress in device efficiencies, the photoactive phase instability of perovskites is one of the major concerns for the long-term stability of the devices and is limiting their transition to commercialization. In this regard, researchers have found that the phase stability of LHPs and the reproducibility of the device performance can be improved by A-site cation alloying with two or more species, these are named mixed cation (double, triple, or quadruple) perovskites. This review provides a state-of-the-art overview of different types of mixed A-site cation bulk perovskite thin films and colloidal NCs reported in the literature, along with a discussion of their synthesis, properties, and progress in solar cells and LEDs., Agencia Estatal de Investigación https://doi.org/10.13039/501100011033 | Ref. PID2020‐117371RA‐I00, Agencia Estatal de Investigación https://doi.org/10.13039/501100011033 | Ref. PCI2020‐112185, Royal Academy of Engineering https://doi.org/10.13039/501100000287 | Ref. RF∖201718∖1701, Deutsche Forschungsgemeinschaft https://doi.org/10.13039/501100001659 | Ref. SPP2196, Deutsche Forschungsgemeinschaft https://doi.org/10.13039/501100001659 | Ref. GRK2642, Bundesministerium für Wirtschaft und Energie https://doi.org/10.13039/501100006360 | Ref. FKZ03EE1070B, Bundesministerium für Wirtschaft und Energie https://doi.org/10.13039/501100006360 | Ref. FKZ03EE1070A, Xunta de Galicia | Ref. ED431C2020/09, Xunta de Galicia | Ref. ED431F2021/05
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Artificial intelligence-based, wavelet-aided prediction of long-term outdoor performance of perovskite solar cells

  • Kouroudis, Ioannis
  • Tabah, Kenedy
  • Karimipour, Masoud
  • Ben Ali, Aziz
  • Kishore Kumar, D.
  • Sudhakar, Vediappan
  • Kant Gupta, Ritesh
  • Visoly-Fisher, Iris
  • Lira-Cantú, Mónica
  • Gagliardi, Alessio
The commercial development of perovskite solar cells (PSCs) has been significantly delayed by the constraint of performing time-consuming degradation studies under real outdoor conditions. These are necessary steps to determine the device lifetime, an area where PSCs traditionally suffer. In this work, we demonstrate that the outdoor degradation behavior of PSCs can be predicted by employing accelerated indoor stability analyses. The prediction was possible using a swift and accurate pipeline of machine learning algorithms and mathematical decompositions. By training the algorithms with different indoor stability data sets, we can determine the most relevant stress factors, thereby shedding light on the outdoor degradation pathways. Our methodology is not specific to PSCs and can be extended to other PV technologies where degradation and its mechanisms are crucial elements of their widespread adoption., The authors acknowledge funding from the project ProperPhotoMile, supported under the umbrella of SOLAR-ERA.NET Cofund 2 by The Spanish Ministry of Science and Education and the AEI under project PCI2020-112185 and CDTI project number IDI-20210171; the Federal Ministry for Economic Affairs and Energy on the basis of a decision by the German Bundestag project number FKZ 03EE1070B and FKZ 03EE1070A; and the Israel Ministry of Energy with project number 220-11-031. SOLAR-ERA.NET is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N◦ 786483). Further, A.G. acknowledges financial support from TUM Innovation Network for Artificial Intelligence powered Multifunctional Material Design (ARTEMIS) and funding in the framework of Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy – EXC 2089/1-390776260 (e-conversion). D.K.K. is grateful for the Blaustein postdoctoral fellowship at BGU. V.S. is grateful for the Krietman Postdoctoral fellowship at BGU. R.K.G. is grateful for the Swiss Inst. for Dryland Environmental and Energy Research postdoctoral fellowship at BGU. Part of this work is under Materials Science Ph.D. degree for K.T.T. of the Universitat Autonoma de Barcelona (UAB, Spain). ICN2 is supported by the Severo Ochoa Centres of Excellence programme (grant no. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mitigating the amorphization of perovskite layers by using atomic layer deposition of alumina

  • Kedia, Mayank
  • Das, Chittaranjan
  • Kot, Malgorzata
  • Yalcinkaya, Yenal
  • Zuo, Weiwei
  • Tabah, Kenedy
  • Matvija, Peter
  • Ezquer, Mikel
  • Cornago, Iñaki
  • Hempel, Wolfram
  • Kauffmann, Florian
  • Plate, Paul
  • Lira-Cantú, Mónica
  • Weber, Stefan A.L.
  • Saliba, Michael
Atomic layer deposition of aluminum oxide (ALD-Al<inf>2</inf>O<inf>3</inf>) layers has recently been studied for stabilizing perovskite solar cells (PSCs) against environmental stressors, such as humidity and oxygen. In addition, the ALD-Al<inf>2</inf>O<inf>3</inf> layer acts as a protective barrier, mitigating pernicious halide ion migration from the perovskite towards the hole transport interface. However, its effectiveness in preventing the infiltration of ions and additives from the hole-transport layer into perovskites remains insufficiently understood. Herein, we demonstrate the deposition of a compact ultrathin (∼0.75 nm) ALD-Al<inf>2</inf>O<inf>3</inf> layer that conformally coats the morphology of a triple-cation perovskite layer. This promotes an effective contact of the hole transporter layer on top of the perovskite, thereby improving the charge carrier collection between these two layers. Upon systematically investigating the layer-by-layer structure of the PSC, we discovered that ALD-Al<inf>2</inf>O<inf>3</inf> also acts as a diffusion barrier for the degraded species from the adjacent transport layer into the perovskite. In addition to these protective considerations, ALD-Al<inf>2</inf>O<inf>3</inf> impedes the transition of crystalline perovskites to an undesired amorphous phase. Consequently, the dual functionality (i.e., enhanced contact and diffusion barrier) of the ALD-Al<inf>2</inf>O<inf>3</inf> protection enhanced the device performance from 19.1% to 20.5%, while retaining 98% of its initial performance compared to <10% for pristine devices after 1500 h of outdoor testing under ambient conditions. Finally, this study deepens our understanding of the mechanism of ALD-Al<inf>2</inf>O<inf>3</inf> as a two-way diffusion barrier, highlighting the multifaceted role of buffer layers in interfacial engineering for the long-term stability of PSCs., M. S., M. K., and C. D. thank Helmholtz Young Investigator Group FRONTRUNNER. M. S., Y. Y., and S. W. thank the German Research Foundation (DFG) for funding (SPP2196, 431314977/GRK 2642). M. S. and M. L. C. acknowledge the funding from ProperPhotoMile. Project ProperPhotoMile is supported under the umbrella of SOLARERA.NET co-funded by The Spanish Ministry of Science and Education and the AEI under Project PCI2020-112185 and CDTI Project IDI-20210171; the Federal Ministry for Economic Affairs and Energy based on a decision by the German Bundestag Projects FKZ 03EE1070B and FKZ 03EE1070A and the Israel Ministry of Energy with Project 220-11-031. SOLAR-ERA.NET is supported by the European Commission with the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET action number 786483), funded by the European Union. M. S. acknowledges funding from the European Research Council under the Horizon Europe Program (LOCAL-HEAT, Grant Agreement 101041809). M. S. acknowledges funding from the German Bundesministerium für Bildung and Forschung (BMBF), project “NETPEC” (01LS2103E). M. S. also acknowledges funding by the Deutsche Forschungsgemeinschaft (German Research Foundation) via the project “Correlating Defect Densities with Recombination Losses in Halide-Perovskite Solar Cells.” The authors gratefully acknowledge the core facility SRF AMICA (Stuttgart Research Focus Advanced Materials Innovation and Characterization) at the University of Stuttgart for their support and assistance. This research was supported by the German Research Foundation (DFG, AOBJ: 661806). M. Kot and P. P. acknowledge the funding from Zentrales Innovationsprogramm Mittelstand (ZIM), Federal Ministry of Economics and Climate Protection Project no KK5087602BR1. M. S., M. K., and C. D. acknowledge the CERIC-ERIC Consortium for access to experimental facilities and financial support (proposal number 20232163). P. M. is grateful for the partial financial support provided by the Czech Ministry of Education, Youth and Sports (project LM2023072). M. K. and M. S. also acknowledge the VIPERLAB project financed by the European Union's Horizon 2020 (grant agreement No. 101006715). M. K. thanks Eugenia Zugasti and Javier Diaz Berrade from CENER, Spain, for their assistance during the MPPT measurements. M. K. also acknowledges Ludwig Marth from SENTECH for technical assistance during ALD deposition., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Artificial Intelligence-Based, Wavelet-Aided Prediction of Long-Term Outdoor Performance of Perovskite Solar Cells

  • Kouroudis, Ioannis
  • Tanko, Kenedy T.|||0000-0002-2466-7104
  • Karimipour, Masoud|||0000-0002-6619-4798
  • Ali, Aziz Ben
  • Kumar, Kishore D.
  • Sudhakar, Vediappan
  • Gupta, Ritesh Kant
  • Visoly-Fisher, Iris|||0000-0001-6058-4712
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Gagliardi, Alessio|||0000-0002-3322-2190
The commercial development of perovskite solar cells (PSCs) has been significantly delayed by the constraint of performing time-consuming degradation studies under real outdoor conditions. These are necessary steps to determine the device lifetime, an area where PSCs traditionally suffer. In this work, we demonstrate that the outdoor degradation behavior of PSCs can be predicted by employing accelerated indoor stability analyses. The prediction was possible using a swift and accurate pipeline of machine learning algorithms and mathematical decompositions. By training the algorithms with different indoor stability data sets, we can determine the most relevant stress factors, thereby shedding light on the outdoor degradation pathways. Our methodology is not specific to PSCs and can be extended to other PV technologies where degradation and its mechanisms are crucial elements of their widespread adoption.