Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 51
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Libro o Monografía (Book)

Time-Domain Signature Barcodes for Chipless-RFID and Sensing Applications

  • Martín, Ferran|||0000-0002-1494-9167
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
This book presents an unconventional approach for implementing chipless radiofrequency identification (RFID) systems and related sensors. Contrary to most state-of-the-art chipless-RFID systems, the proposed approach is based on time domain and the tags are read through near field. The book discusses different aspects of these chipless-RFID systems, including tag and reader design, strategies to enhance the data density and capacity, tag programming and erasing, tag implementation in plastic and paper substrates, and synchronous tag reading, among others. A tolerance analysis and validation of the different systems, as well as prospective applications, are also included. The book also offers a comprehensive overview of the state-of-the-art in chipless-RFID technology, including a comparative analysis, which is extended also to chip-based RFID systems. Readers are expected to be familiar with RF/microwave engineering technology. Besides master's and postgraduate students, the book is intended for researchers in the field of radiofrequency identification (RFID) technology, and may be of interest for engineers working in the areas of wireless communications, automatic identification, security, authentication, microwave and wireless sensors, as well as those dealing with internet of things (IoT) and smart systems.
Dipòsit Digital de Documents de la UAB
Publication Libro o Monografía (Book)

Planar Microwave Sensors

  • Martín, Ferran|||0000-0002-1494-9167
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
Planar Microwave Sensors is an authoritative resource on the subject, discussing the main relevant sensing strategies, working principles, and applications on the basis of the authors’ own experience and background, while also highlighting the most relevant contributions to the topic reported by international research groups. The authors provide an overview of planar microwave sensors grouped by chapters according to their working principle. In each chapter, the working principle is explained in detail and the specific sensor design strategies are discussed, including validation examples at both simulation and experimental level. The most suited applications in each case are also reported. The necessary theory and analysis for sensor design are further provided, with special emphasis on performance improvement (i.e., sensitivity and resolution optimization, dynamic range, etc.). Lastly, the work covers a number of applications, from material characterization to biosensing, including motion control sensors, microfluidic sensors, industrial sensors, and more.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of Capacitively Loaded Coupled-Line Bandpass Filters With Compact Size and Spurious Suppression

  • Orellana, Marco
  • Selga, Jordi
  • Vélez, París
  • Sans, Marc
  • Rodríguez Pérez, Ana María
  • Bonache, Jordi
  • Martin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper is focused on the synthesis of capacitively loaded coupled lines for the design of bandpass filters with compact size and spurious suppression. The filters consist of cascaded pairs of coupled lines periodically loaded with patch capacitors. The loading capacitances provide a slow-wave effect to the coupled lines useful for filter miniaturization, whereas periodicity introduces bandgaps that can be controlled in order to achieve spurious suppression. Filter design is achieved following an automated process based on aggressive space mapping (ASM) optimization. The two reported examples, a third-order filter with central frequency f0=1.0 GHz, 8% fractional bandwidth, and 0.1-dB ripple level and a fifth-order filter with central frequency f0=1.8 GHz, 8% fractional bandwidth, and 0.1-dB ripple level, demonstrate the potential of the proposed ASM-based design approach, as well as the effectiveness of the loading capacitances to reduce filter size and reject the spurious bands. Significant size reduction in both filters is achieved, whereas the out-of-band rejection is better than 30 and 45 dB in the third-order and fifth-order filters, respectively, up to at least 4f0 ., This work was supported in part by MINECO-Spain under Project TEC2013-47037-C5-1-R, Project TEC2013-40600-R, and Project TEC2013-49221-EXP, in part by the Generalitat de Catalunya under Project 2014SGR-157, and in part by FEDER funds. The work of F. Martin was supported by the Institucio Catalana de Recerca i Estudis Avancats. The work of M. Orellana was supported in part by the Universidad de Costa Rica, in part by MICITT, and in part by CONICIT
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and Stabilization of Subnanometric Gold Oxide Nanoparticles on Multiwalled Carbon Nanotubes and their Catalytic activity

  • Alves, Leonor
  • Ballesteros, Belén
  • Correa-Duarte, Miguel Ángel
  • Mendoza, Ernest
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Cabrero Antonino, Jose Ramón|||0000-0001-9628-9803
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
Small gold nanoclusters in a very narrow size distribution (1.1 ( 0.5 nm) have been stabilized onto multiwalled carbon nanotubes (MWCNT). Theoretical studies supported by XPS and 16O2 / 18O2 isotopic exchange experiments have shown that, on small gold nanoparticles (0.9 1.5 nm), dissociation of molecular O2 and formation of a surface oxide-like layer is energetically favorable and occurs at room temperature, while O2 recombination and desorption involves a larger activation barrier. CO titration experiments and theoretical studies demonstrate that the reactivity of the oxidized particles toward CO does not only depend on particle size but also on oxygen coverage. The oxidation reduction process described is reversible, and the oxidized nanoparticles are active in the epoxidation of styrene with air, Financial support by the Spanish MICINN (MAT2009-14528-C02-01 and PLE2009-0046) and CONSOLIDER Ingenio 2010-MULTICAT is gratefully acknowledged. We thank Generalitat Valenciana for funding through the PROMETEO project 2088/130 amd Generalitat de Catalunya for funding though the project VALTEC 09-01-0043. L.A. thanks the Centre de Recerca en Nanoenginyeria of the Universitat Politecnica de Catalunya for the predoctoral fellowship and B.B. thanks MICINN for the PTA2008-1108-I contract. We thank Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia for computational resources and technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automated design of bandpass filters based on open complementary split ring resonators (OCSRRs) using aggressive space mapping (ASM) optimization

  • Rodríguez Pérez, Ana María
  • Selga, Jordi
  • Sans, Marc
  • Martin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper is focused on the design of bandpass filters based on open complementary split ring resonators (OCSRRs) in microstrip technology. The filters are obtained by coupling the corresponding shunt resonators (OCSRRs) through admittance inverters (quarter wavelength transmission line sections). Different undesirable effects derived from the chosen topology are taken into account and are compensated at the design level. These effects include the reduction in bandwidth (caused by the narrowband functionality of the line sections acting as admittance inverters), and the presence of a spurious band above the filter passband. The proposed technique is based on the well-known aggressive space mapping algorithm, which is a powerful tool for the synthesis and design of microwave components. The design of the OCSRR-based filter is provided in a fully automated way as the main result of this paper. Copyright (c) 2015 John Wiley & Sons, Ltd., This work has been supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R, and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), and Institucio Catalana de Recerca i Estudis Avancats (who has awarded Ferran Martin).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automated Design of Common-Mode Suppressed Balanced Wideband Bandpass Filters by Means of Aggressive Space Mapping

  • Sans, M.
  • Selga, J.
  • Velez, P.
  • Rodriguez Perez, Ana Maria
  • Bonache Albacete, Jordi
  • Martin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The automated and unattended design of balanced microstrip wideband bandpass filters by means of aggressive space mapping (ASM) optimization is reported in this paper. The proposed filters are based on multisection mirrored stepped impedance resonators (SIRs) coupled through quarter-wavelength transmission lines, acting as admittance inverters., This work was supported by MINECO-Spain (projects TEC2013-47037-C5-1-R, TEC2013-40600-R, TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), Institucio Catalana de Recerca i Estudis Avancats (who awarded Ferran Martin), and by FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automated design of balanced wideband bandpass filters based on mirrored stepped impedance resonators (SIRs) and interdigital capacitors

  • Sans, Marc
  • Selga, Jordi
  • Vélez, París
  • Rodriguez Perez, Ana Maria
  • Bonache, Jordi
  • Martin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper presents small balanced bandpass filters exhibiting wide differential-mode pass bands and high common-mode suppression. The filters are implemented in microstrip technology and their topology consists of multisection mirrored stepped impedance resonators (SIRs) alternating with mirrored interdigital capacitors. The mirrored SIRs provide the required common-mode transmission zeros to achieve effective rejection of that mode in the region of interest, i.e. the differential-mode pass band. An automated design method for such filters, based on aggressive space mapping, is reported. The method uses the equivalent circuit model of both the mirrored SIRs and the interdigital capacitors, and filter synthesis is based on a quasi-Newton iterative algorithm where parameter extraction is the key aspect. The automated design approach is illustrated through an order-3 filter, where it is demonstrated that the filter topology is generated from the specifications. As compared with previous balanced filters based on mirrored SIRs coupled through admittance inverters, the proposed filters of this work are smaller and the design method is simplified, since bandwidth compensation due to the narrowband functionality of the inverters is avoided., This work was supported by MINECO-Spain (projects no. TEC2013-47037-C5-1-R, TEC2013-40600-R, and TEC2013-49221-EXP), Generalitat de Catalunya (project no. 2014SGR-157), and Institucio Catalana de Recerca i Estudis Avancats (who has awarded Ferran Martin).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of slow-wave structures based on capacitive-loaded lines through aggressive space mapping (ASM)

  • Orellana, M.
  • Selga, J.
  • Sans, M.
  • Rodriguez Perez, Ana Maria
  • Martín Antolín, Juan Fernando
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This article is focused on the automated synthesis of slow-wave structures based on microstrip lines loaded with patch capacitors. Thanks to the presence of the shunt capacitors, the effective capacitance of the line is enhanced, and the phase velocity of the structure can be made significantly smaller than the one of the unloaded line. The target is to achieve the layout of the slow-wave structure able to provide the required slow-wave ratio, characteristic (Bloch) impedance and electrical length (i.e., the usual specifications in the design of slow-wave transmission lines). To this end, a two-step synthesis method, based on the aggressive space mapping (ASM) algorithm, is proposed for the first time. Through the first ASM algorithm, the circuit schematic providing the target specifications is determined. Then, the second ASM optimizer is used to generate the layout of the structure. To illustrate the potential of the proposed synthesis method, three application examples are successfully reported. The two-step ASM algorithm is able to provide the layout of the considered structures from the required specifications, without the need of an external aid in the process., This work has been supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01, TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), Institucio Catalana de Recerca i Estudis Avancats (who has awarded Ferran Martin) and FEDER Funds. Marco Orellana acknowledges the support of the Universidad de Costa Rica, MICITT and CONICIT to study at the Univesitat Autonoma de Barcelona.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Compact Wideband Balanced Bandpass Filters With Very Broad Common-Mode and Differential-Mode Stopbands

  • Sans, Marc
  • Selga, Jordi
  • Vélez, París
  • Bonache, J.
  • Rodríguez Pérez, Ana María
  • Martin Antonlin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Compact balanced bandpass filters based on a combination of multisection mirrored stepped-impedance resonators and interdigital capacitors are presented in this paper. The considered filter topology is useful to achieve wide bandwidths for the differential mode, with broad stop bands for that mode, as well as very efficient common-mode suppression. By conveniently adjusting the transmission zeros for both operation modes, the differential- and common-mode stopbands can be extended up to significantly high frequencies. Filter size and this differential- and common-mode stopband performance are the main relevant characteristics of the proposed balanced filters. The potential of the approach is illustrated by the design of a prototype order-5 balanced bandpass filter, with central frequency $f_{0} = 1.8$ GHz, 48% fractional bandwidth (corresponding to 55.4% ¿3-dB bandwidth), and 0.04-dB ripple level. The filter is automatically synthesized by means of an aggressive space-mapping software tool, specifically developed, and two (pre- and post-) optimization algorithms, necessary to determine the transmission-zero frequencies. The designed filter is as small as $0.48lambda _{g} times 0.51lambda _{g}$ , where $lambda _{g}$ is the guided wavelength at the central filter frequency, and the differential-mode stopband extends up to at least 6.5 GHz with more than 22-dB rejection. The common-mode suppression is better than 28 dB from dc up to at least 6.5 GHz., This work was supported in part by MINECO-Spain under Project TEC2013-40600-R, Project TEC2016-75650-R, and Project TEC2016-75934-C4-1-R, in part by the Generalitat de Catalunya under Project 2014SGR-157, in part by the Institucio Catalana de Recerca i Estudis Avancats (who awarded F. Martin), and in part by by FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of planar wideband bandpass filters from specifications using a two-step aggressive space mapping (ASM) optimization algorithm

  • Sans, Marc
  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Bonache, Jordi
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the automated and unattended optimization of a type of planar wideband bandpass filters by means of aggressive space mapping (ASM). The considered filters are microstrip filters implemented through a combination of shunt connected stepped impedance resonators (SIRs) and grounded stubs coupled through admittance inverters. The most relevant and novel aspect of this paper is the fact that the filter layout is automatically generated from filter specifications, i.e., central frequency, fractional bandwidth, in-band ripple and order, without the need of any external aid to the design process. To achieve this layout generation, filter optimization has been divided into two independent ASM processes. The first one generates the filter schematic (circuit element values) providing the required specifications. This first iterative process is necessary since, due to the narrow band operation of the admittance inverters, the target specifications are achieved by compensating the effects of such narrow band operation. The purpose of the second ASM algorithm is to automatically generate the layout from the filter schematic resulting from the first ASM process. To validate the new two-step ASM optimization tool, two sets of filter specifications (inputs of the developed tool), are considered. The generated filter layouts exhibit frequency responses that satisfy the specifications, and are in excellent agreement with the responses of the schematics., This work was supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01 and TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), and Institucio Catalana de Recerca i Estudis Avancats (who has awarded F. Martin). This paper was presented in part at the IEEE MTT-S International Microwave Symposium, Tampa Bay, FL, USA, June 1-6, 2014.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Application of RF-MEMS-Based Split Ring Resonators (SRRs) to the Implementation of Reconfigurable Stopband Filters, a Review

  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
In this review paper, several strategies for the implementation of reconfigurable split ring resonators (SRRs) based on RF-MEMS switches are presented. Essentially three types of RF-MEMS combined with split rings are considered: (i) bridge-type RF-MEMS on top of complementary split ring resonators CSRRs; (ii) cantilever-type RF-MEMS on top of SRRs; and (iii) cantilever-type RF-MEMS integrated with SRRs (or RF-MEMS SRRs). Advantages and limitations of these different configurations from the point of view of their potential applications for reconfigurable stopband filter design are discussed, and several prototype devices are presented.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Spectral signature barcodes based on S-shaped split ring resonators (S-SRRs)

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, it is shown that S-shaped split ring resonators (S-SRRs) are useful particles for the implementation of spectral signature (i.e., a class of radiofrequency) barcodes based on coplanar waveguide (CPW) transmission lines loaded with such resonant elements. By virtue of its S shape, these resonators are electrically small. Hence S-SRRs are of interest for the miniaturization of the barcodes, since multiple resonators, each tuned at a different frequency, are used for encoding purposes. In particular, a 10-bit barcode occupying 1 GHz spectral bandwidth centered at 2.5 GHz, with dimensions of 9 cm2, is presented in this paper.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Design of planar wideband bandpass filters from specifications using a two-step aggressive space mapping (ASM) optimization algorithm

  • Sans, Marc
  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Rodríguez, Ana
  • Bonache, Jordi|||0000-0002-7225-5737
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
2This paper is focused on the automated and unattended optimization of a type of planar wideband bandpass filters by means of aggressive space mapping (ASM). The considered filters are microstrip filters implemented through a combination of shunt connected stepped impedance resonators (SIRs) and grounded stubs coupled through admittance inverters. The most relevant and novel aspect of this paper is the fact that the filter layout is automatically generated from filter specifications, i.e., central frequency, fractional bandwidth, in-band ripple and order, without the need of any external aid to the design process. To achieve this layout generation, filter optimization has been divided into two independent ASM processes. The first one generates the filter schematic (circuit element values) providing the required specifications. This first iterative process is necessary since, due to the narrow band operation of the admittance inverters, the target specifications are achieved by compensating the effects of such narrow band operation. The purpose of the second ASM algorithm is to automatically generate the layout from the filter schematic resulting from the first ASM process. To validate the new two-step ASM optimization tool, two sets of filter specifications (inputs of the developed tool), are considered. The generated filter layouts exhibit frequency responses that satisfy the specifications, and are in excellent agreement with the responses of the schematics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Dual and broadband power dividers at microwave frequencies based on composite right/left handed (CRLH) lattice networks

  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
This paper proposes a dual-band power divider operating at GHz frequencies and implemented by means of impedance transformers (also called inverters) based on lattice networks and transmission line sections. The dual-band functionality of the proposed device is achieved thanks to the composite right/left handed (CRLH) behavior of the impedance transformers, able to provide -90° and +90° phase shift at the first and second design frequencies, respectively, of the divider. By using such combination of transmission line sections and lattice networks, the characteristic impedance of the impedance transformers is roughly constant over wide bandwidths, with the results of broad operating bands. To demonstrate the possibilities of the approach, a prototype device is designed, fabricated and characterized.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis of slow-wave structures based on capacitive-loaded lines through aggressive space mapping (ASM)

  • Orellana Gutiérrez, Marco Antonio
  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Sans, Marc
  • Rodríguez, Ana
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
This article is focused on the automated synthesis of slow-wave structures based on microstrip lines loaded with patch capacitors. Thanks to the presence of the shunt capacitors, the effective capacitance of the line is enhanced, and the phase velocity of the structure can be made significantly smaller than the one of the unloaded line. The target is to achieve the layout of the slow-wave structure able to provide the required slow-wave ratio, characteristic (Bloch) impedance and electrical length (i.e., the usual specifications in the design of slow-wave transmission lines). To this end, a two-step synthesis method, based on the aggressive space mapping (ASM) algorithm, is proposed for the first time. Through the first ASM algorithm, the circuit schematic providing the target specifications is determined. Then, the second ASM optimizer is used to generate the layout of the structure. To illustrate the potential of the proposed synthesis method, three application examples are successfully reported. The two-step ASM algorithm is able to provide the layout of the considered structures from the required specifications, without the need of an external aid in the process.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Recent advances in the modeling of transmission lines loaded with split ring resonators (SRRs)

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
This paper reviews the recent advances in the modeling of transmission lines loaded with split ring resonators (SRRs). It is well known that these artificial lines can exhibit a negative effective permeability in a narrow band above the SRR fundamental resonance, providing stopband functionality. By introducing shunt inductive elements to the line, the stopband can be switched to a pass band with left-handed (LH) wave propagation. For the design of microwave circuits based on these artificial lines, accurate circuit models are necessary. The former circuit model of SRR-loaded lines was presented more than one decade ago and is valid under restrictive conditions. This paper presents the progress achieved in the modeling of these artificial lines during the last years. The analysis, restricted to coplanar waveguide (CPW) transmission lines loaded only with SRRs (negative permeability transmission lines), includes the effects of SRR orientation, the coupling between adjacent resonators, and the coupling between the two SRRs constituting the unit cell. The proposed circuit models are validated through electromagnetic simulation and experimental data. It is also pointed out that the analysis can be easily extended to negative permittivity transmission lines based on complementary split ring resonators (CSRRs).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On the radiation properties of split ring resonators (SRRs) at the second resonance

  • Zuffanelli, Simone
  • Zamora, Gerard|||0000-0001-6609-8643
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
The radiation properties of split-ring resonators (SRRs) at their second resonance frequency are studied for the first time in this work. In particular, the electric and magnetic dipole moments of the edge-coupled SRR are calculated analytically under the assumption of strong coupling between the internal and external rings. Based on these results, the radiation resistance and the radiation efficiency are obtained theoretically. Electromagnetic simulations of the structure reveal that there is very good agreement with the theoretical predictions, pointing out the validity of the proposed analysis. As a proof of concept, an SRR antenna prototype is designed and fabricated. Experimental data are in good agreement with the theoretical and simulated results, and demonstrate the validity of the SRR working at its second resonance frequency as a radiating element.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Compact coplanar waveguide bandpass filter based on coupled S-shaped split ring resonators

  • Karami-Horestani, Ali|||0000-0002-7747-2554
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fumeaux, Cristophe
  • Martín, Ferran|||0000-0002-1494-9167
This letter is focused on the application of coupled single-layer S-shaped split ring resonators (S-SRRs) to the design of highly compact bandpass filters in coplanar waveguide (CPW) technology. S-SRRs have been previously demonstrated as miniaturized resonators, particularly suited for applications in conjunction with coplanar line geometries. However, size reduction of CPW filters based on impedance inverters and S-SRRs is limited by the inverters. Therefore, this letter proposes an alternative geometry of CPW bandpass filters employing S-SRRs in a configuration based on the theory of coupled resonators. A highly compact third-order bandpass filter is designed using this principle, and the proposed approach is validated through experiment, demonstrating competitive filter performance achieved in an extremely small area.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultra-compact (80 mm2) differential-mode ultra-wideband (UWB) bandpass filters with common-mode noise suppression

  • Vélez, Paris|||0000-0001-6502-5987
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Bonache, Jordi|||0000-0002-7225-5737
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martel, Jesús
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a novel approach for the implementation of balanced ultra-wideband (UWB) bandpass filters with common-mode noise suppression. To a first-order approximation, the differential-mode filter response is described by the canonical circuit model of a bandpass filter, i.e., a cascade of series-connected resonators alternating with shunt-connected parallel resonant tanks. Thus, the series branches of the balanced filter are implemented by means of inductive strips and patch capacitors, whereas the shunt sections are realized through mirrored stepped-impedance resonators (SIRs) and low-impedance (i.e., capacitive) short transmission-line sections. For the differential mode, the symmetry plane is a virtual ground, the wide strip sections of the SIRs are effectively grounded, and the SIRs behave as grounded inductors parallel connected to capacitors. However, for the common mode, where the symmetry plane is an open (magnetic wall), the SIRs act as shunt-connected series resonators, thus providing transmission zeros at their resonance frequencies. By properly tailoring the location of these transmission zeros, rejection of the common mode over the differential filter passband can be achieved. To illustrate the potential of the approach, an order-5 balanced bandpass filter covering the regulated band for UWB communications (3.1-10.6 GHz) is designed and fabricated. The filter exhibits common-mode rejection above 10 dB over the whole differential filter passband, with differential-mode insertion losses lower than 1.9 dB and return losses better than 10 dB. Since the proposed design approach is based on planar semi-lumped components, filter size is as small as 10.5 mm X 7.6 mm.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Microwave sensors based on symmetry properties of resonator-loaded transmission lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
This review paper is focused on the design of microwave sensors using symmetry properties of transmission lines loaded with symmetric resonators. The operating principle of these sensors is presented and then several prototype devices are reported, including linear and angular displacement sensors and rotation speed sensors. The main advantage of the proposed sensors is the robustness against changing environmental conditions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Modeling metamaterial transmission lines loaded with pairs of coupled split-ring resonators

  • Su, Lijuan|||0000-0002-4753-9340
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
A lumped-element equivalent circuit model of the unit cell of metamaterial transmission lines loaded with pairs of coupled split-ring resonators (SRRs) is presented. It is assumed that the dominant coupling mechanism between the SRRs forming the pair is magnetic, and that the distance between SRRs of adjacent cells is high enough to neglect such additional inter-resonator coupling. SRRs are oriented with their symmetry plane orthogonal to the line axis. Under these conditions, the line-to-SRR coupling is also magnetic, the electric coupling being negligible. The presented model accounts for the rupture of symmetry that can be caused, for instance, by asymmetric dielectric loading of the SRRs. Thus, the analysis is carried out on a general model where the SRRs of the pair have different inductance and capacitance. Then, different cases are studied, in particular a line with identical SRRs, and a line with different SRRs, but with the same resonance frequency. It is shown that coupling between SRRs tends to far or split the resonance frequencies of the loaded lines (transmission zeros), except for the symmetric case, where only one resonance (different to the one of uncoupled SRRs) appears. The model is validated by comparing circuit simulations using extracted parameters with electromagnetic simulations and experimental data.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Differential microstrip lines with common-mode suppression based on electromagnetic band-gaps (EBGs)

  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A technique for the suppression of the common mode in differential (balanced) microstrip lines, based on electromagnetic band-gaps (EBGs), is presented in this letter. It is demonstrated that by periodically modulating the common-mode characteristic impedance of the line and simultaneously forcing the differential-mode impedance to be uniform (and equal to the reference impedance of the differential ports), the common mode can be efficiently suppressed over a certain frequency band, while the line is transparent for the differential-mode. The main advantage of EBGs, as compared to other approaches for common-mode suppression in differential microstrip lines, is the fact that the ground plane is kept unaltered. Moreover, the design of the differential line is straightforward since the required level of common-mode suppression and bandwidth are given by simple approximate analytical expressions. As a design example, we report a four-stage common-mode suppressed differential line with 68% fractional bandwidth for the common-mode stopband centered at 2.4 GHz, and maximum common-mode rejection ratio (CMRR) of 19 dB at that frequency. Furthermore, we have designed and fabricated a six-stage double-tuned common-mode suppressed differential line in order to enhance the stopband bandwidth for the common mode around 2.4 GHz.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

2-SR-based electrically small antenna for RFID applications

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zuffanelli, Simone
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Zamora, Gerard|||0000-0001-6609-8643
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
In this work, the 2-turn spiral resonator (2-SR) is proposed as an electrically small antenna for passive radio frequency identification (RFID) tags at the European ultra-high frequency (UHF) band. The radiation properties are studied in order to explore the viability of the 2-SR applied to tag antenna design. Based on analytical calculations, the radiation pattern is found to provide a cancelation of the radiation nulls. This results in a mitigation of the blind spots in the read range, which are present in typical UHF-RFID tags as an undesired feature. As a proof of concept, a passive tag of size 35 mm × 40 mm (λ₀/10 × λ₀/9) based on the 2-SR antenna is designed and fabricated. Good radiation efficiency (75 %) and a quasi-isotropic radiation pattern are obtained. The experimental tag read range for different directions is in good agreement with the simulation results. The measured read range exhibits maximum and minimum values of 6.7 and 3.5 m, respectively.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Analysis of the split ring resonator (SRR) antenna applied to passive UHF-RFID tag design

  • Zuffanelli, Simone
  • Zamora, Gerard|||0000-0001-6609-8643
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
An electrically small planar passive UHF-RFID tag based on an edge-coupled split ring resonator (EC-SRR) antenna is presented in this work. In order to explore the potentiality and limitations of the SRR antenna and to aid the tag design, an analytical study of the SRR radiation properties at its fundamental resonance is presented for the first time. Radiation resistance, efficiency, polarization, bandwidth, and impedance matching with the radio-frequency identification (RFID) application-specific integrated circuit (ASIC) are treated in the study. Based on such analysis, the tag design process is presented, and a tag prototype of size 30 mm × 30 mm (λ₀/11 × λ₀/11) is designed to operate in the North-American UHF-RFID band (902-928 MHz) and manufactured. The measured read range is in good agreement with the simulation and reaches 9.3 m at 911 MHz. The tag also features a mitigation of the blind spots, providing a minimum measured read range of 4.2 m.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Coplanar waveguides loaded with symmetric and asymmetric multisection stepped impedance resonators, modeling and potential applications

  • Su, Lijuan|||0000-0002-4753-9340
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
This article is focused on the analysis and modeling of coplanar waveguide (CPW) transmission lines loaded with multisection stepped impedance resonators (MS-SIRs), transversely etched on the back substrate side. The considered structure consists of a CPW loaded with a 5-section SIR (5S-SIR) with wide (capacitive) central and external sections cascaded with narrow (inductive) sections. The general case of a 5S-SIR with arbitrary lengths and widths of the different sections is considered. The structure is described by a pair of inductively coupled grounded series resonators coupled to the line through the capacitance of the central 5S-SIR section. If the structure is symmetric, the transmission coefficient exhibits a single transmission zero. Hence, these structures can be used as notch filters exhibiting wide bandwidths, provided the inductance of the 5S-SIR can be made small, and the capacitance can be enhanced by virtue of the broadside coupling. However, if symmetry is broken, two notches separated a distance that depends on the level of asymmetry and inductive coupling appear. Therefore, these structures are also useful for the implementation of differential sensors and comparators. The proposed model is validated through parameter extraction and experiment, and a proof-of-concept of a comparator is reported.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Modeling and applications of metamaterial transmission lines loaded with pairs of coupled complementary split ring resonators (CSRRs)

  • Su, Lijuan|||0000-0002-4753-9340
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
This letter is focused on the modeling, analysis, and applications of microstrip lines loaded with pairs of electrically coupled complementary split-ring resonators (CSRRs). Typically, these epsilon-negative (ENG) metamaterial transmission lines are implemented by loading the line with a single CSRR (etched beneath the conductor strip) in the unit cell. This provides a stopband in the vicinity of the CSRR resonance. However, by loading the line with a pair of CSRRs per unit cell, it is possible to either implement a dual-band ENG transmission line (useful, for instance, as a dual-band notch filter), provided the CSRRs are tuned at different frequencies, or to design microwave sensors and comparators based on symmetry disruption (in this case by using identical CSRRs and by truncating symmetry by different means, e.g., asymmetric dielectric loading). The design of these CSRR-based structures requires an accurate circuit model able to describe the line, the resonators, and the different coupling mechanisms (i.e., line-to-resonator and inter-resonator coupling). Thus, a lumped element equivalent circuit is proposed and analyzed in detail. The model is validated by comparison to electromagnetic simulations and measurements. A proof-of-concept of a differential sensor for dielectric characterization is proposed. Finally, the similarities of these structures with coplanar waveguide transmission lines loaded with pairs of SRRs are pointed out.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancing common-mode suppression in microstrip differential lines by means of chirped and multi-tuned electromagnetic bandgaps

  • Vélez, Paris|||0000-0001-6502-5987
  • Valero, M.
  • Su, Lijuan|||0000-0002-4753-9340
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Bonache, Jordi|||0000-0002-7225-5737
This article presents common-mode suppressed microstrip differential lines based on chirped electromagnetic bandgaps (EBGs). To achieve common-mode suppression in a wide band, the common-mode impedance is modulated following a sinusoidal chirping, whereas the differential-mode impedance is kept unaltered, thus ensuring that the line is transparent for that mode. The result is a differential line exhibiting common-mode suppression in a band from 2.45 GHz up to 7.37 GHz centered at 5 GHz (98.4% bandwidth). As compared to previous works, based on single tuned or double tuned EBGs, the proposed technique is useful to achieve wider rejection bands for the common mode. Nevertheless, the authors also propose an alternative based on multi-tuned EBGs, in order to obtain a comparable fractional bandwidth. In both cases, the design procedure is simple, and the ground plane is kept unaltered.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Dual-band balanced bandpass filter with common-mode suppression based on electrically small planar resonators

  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
The design of fully planar dual-band balanced bandpass filters with common-mode noise suppression is reported. The proposed filters are based on electrically small resonators coupled through admittance inverters. For design purposes, the circuit models of the considered resonators are reported. The key aspect for selective mode suppression (i.e., common-mode rejection in the differential-mode pass bands) is related to symmetry properties. Thus, for the differential-mode the symmetry plane is an electric wall, and the equivalent circuit for that mode provides dual-band functionality. Conversely, for the common-mode the symmetry plane is a magnetic wall, and the equivalent circuit exhibits a rejection band. As a proof of concept, the design of an order-2 Chebyshev dual-band balanced bandpass filter with center frequencies f₁= 1.8 GHz (GSM band) and f₂=2.4 GHz (Wi-Fi band), fractional bandwidth FBW= 7%, and ripple level LA1= 0.01 dB is reported. Index Terms-Balanced filters, common-mode.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A high-gain passive UHF-RFID tag with increased read range

  • Zuffanelli, Simone
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Zamora, Gerard|||0000-0001-6609-8643
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
In this work, a passive ultra-high frequency radio-frequency identification UHF-RFID tag based on a 1.25 wavelengths thin dipole antenna is presented for the first time. The length of the antenna is properly chosen in order to maximize the tag read range, while maintaining a reasonable tag size and radiation pattern. The antenna is matched to the RFID chip by means of a very simple matching network based on a shunt inductance. A tag prototype, based on the Alien Higgs-3 chip, is designed and fabricated. The overall dimensions are 400 mm × 14.6 mm, but the tag width for most of its length is delimited by the wire diameter (0.8 mm). The measured read range exhibits a maximum value of 17.5 m at the 902-928 MHz frequency band. This represents an important improvement over state-of-the-art passive UHF-RFID tags.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Controlling the Electromagnetic Field Confinement with Metamaterials

  • Bonache, Jordi|||0000-0002-7225-5737
  • Zamora, Gerard|||0000-0001-6609-8643
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zuffanelli, Simone
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Martín, Ferran|||0000-0002-1494-9167
The definition of a precise illumination region is essential in many applications where the electromagnetic field should be confined in some specific volume. By using conventional structures, it is difficult to achieve an adequate confinement distance (or volume) with negligible levels of radiation leakage beyond it. Although metamaterial structures and metasurfaces are well-known to provide high controllability of their electromagnetic properties, this feature has not yet been applied to solve this problem. We present a method of electromagnetic field confinement based on the generation of evanescent waves by means of metamaterial structures. With this method, the confinement volume can be controlled, namely, it is possible to define a large area with an intense field without radiation leakage. A prototype working in the microwave region has been implemented, and very good agreement between the measurements and the theoretical prediction of field distribution has been obtained.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Compact design of UHF RFID and NFC antennas for mobile phones

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Cairó, Josep Ignasi|||0000-0003-3242-8602
  • Zuffanelli, Simone
  • Zamora, Gerard|||0000-0001-6609-8643
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A small size and low-profile antenna has been developed in order to provide any mobile phone with ultra-high frequency (UHF) radiofrequency identification (RFID) reader functionality. For that purpose, a patch antenna topology has been chosen on account of the mobile phone battery, which exhibits an electromagnetic behaviour similar to a metal plane. The low- profile patch antenna has been designed to operate at the European UHF RFID band. To communicate the mobile phone with the RFID reader module, near-field communication (NFC) technology has been considered. Thus, an NFC antenna, based on square coils, operating at 13.56 MHz has been also designed. Such antenna has been etched on the opposite side of the patch antenna. Overall dimensions of the prototype are 60 mm × 100 mm, i.e. small enough to fit the dimensions of a mobile phone. As proof of concepts to evaluate the performance of the designed antennas, an UHF RFID reader module and an NFC reader module are tested. The measured read range reaches up to 1 m for some commercial tags.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Near-field chipless-RFID system with high data capacity for security and authentication applications

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Núñez, Alba|||0000-0003-3529-7986
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Ramon, Eloi|||0000-0001-9974-8112
  • Martín, Ferran|||0000-0002-1494-9167
A high data capacity chipless radio frequency identification (chipless-RFID) system, useful for security and authentication applications, is presented in this paper. Reading is based on the near-field coupling between the tag, a chain of identical split-ring resonators (SRRs) printed on a (typically flexible) dielectric substrate (e.g., liquid crystal polymer, plastic, and paper), and the reader. Encoding is achieved by the presence or absence of SRRs at predefined (equidistant) positions in the chain, and tag identification (ID) is based on sequential bit reading. Namely, the tag must be longitudinally displaced, at short distance, over the reader, a microstrip line loaded with an SRR and fed by a harmonic signal. By this means, the harmonic signal is amplitude modulated, and the (ID) code is contained in the envelope function, which can be obtained by means of an envelope detector. With this system, tag reading requires proximity with the reader, but this is not an issue in many applications within the domain of security and authentication (e.g., secure paper for corporate documents and certificates). Several circularly shaped 40-bit encoders (implemented in a commercial microwave substrate), and the corresponding reader, are designed and fabricated as proof-of-concept demonstrators. Strategies for programming the tags and a first proof-of-concept chipless-RFID tag fabricated on plastic substrate through inkjet printing are included in this paper.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Application of split ring resonator (SRR) loaded transmission lines to the design of angular displacement and velocity sensors for space applications

  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Martín, Ferran|||0000-0002-1494-9167
The accurate measurement of the angular displacement and velocity of reaction wheels is necessary for attitude (orientation) control in space vehicles (satellites). In this paper, microwave, contactless, and low-cost (as compared to optical encoders) sensors useful for that purpose are analyzed in detail. The sensor consists of a rotor and a stator. The rotor is a disk (or a circular crown) of dielectric material, where one or several arrays of equidistant single-loop split ring resonators (SRRs) are etched along its edge, forming circular chains of hundreds of SRRs. The stator is a coplanar waveguide (CPW) also loaded with pairs of single-loop SRRs (etched in the back substrate side), with the centers located in the slot region. The sensing principle is based on the amplitude modulation of a harmonic (single-tone continuous wave) feeding signal, achieved when the chains of the rotor are displaced over the SRR pairs of the stator. Both sensor elements (rotor and stator) must be parallel oriented, with the SRR pairs of the CPW in close proximity to the SRR chains of the rotor (and rotated 180°), in order to favor their coupling. By this means, the transmission coefficient of the CPW is varied by the circular motion of the rotor, and significant amplitude modulation of the feeding signal is achieved. From the envelope function, the angular velocity can be accurately determined. With the proposed sensors, instantaneous and practically unlimited rotation speeds can be measured.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microwave encoders for chipless RFID and angular velocity sensors based on S-shaped split ring resonators

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, it is demonstrated that a chain of S-shaped split ring resonators (S-SRRs) etched on a dielectric substrate can modulate the amplitude of a carrier signal injected to a transmission line (a coplanar waveguide (CPW). To this end, the S-SRR chain must be transversally displaced above the CPW, in close proximity to it. By this means, the transmission coefficient of the line is modulated by the time-varying electromagnetic (inductive) coupling between the line and the S-SRRs of the chain, related to their relative motion. Based on this principle, two different applications can be envisaged: 1) angular velocity sensors and 2) near-field chipless radiofrequency identification (chipless-RFID) tags. In the former application, the S-SRR chain is circularly shaped and the S-SRRs are distributed uniformly along the perimeter of the rotor, at equidistant positions. By this means, the amplitude-modulated signal generated by rotor motion exhibits envelope peaks, whose distance is related to the angular velocity of the rotor. In the use of S-SRRs as microwave encoders for chipless RFID tags, not all the S-SRRs of the chain are present. Their presence or absence at the predefined (equidistant) positions is related to the logic state "1" or "0." Tag reading is sequential, and it is achieved through tag motion (at constant velocity) above the reader, a CPW transmission line fed by a carrier signal. The ID code is contained in the envelope function of the resulting amplitude modulated signal, which can be obtained by means of an envelope detector. With the proposed approach, a high number of pulses in angular velocity sensors can be achieved (with direct impact on angle resolution and sensitivity to changes in instantaneous rotation speed). Moreover, chipless-RFID tags with unprecedented number of bits can be obtained. The proposed angular velocity sensors can be useful in space environments, whereas the chipless-RFID systems based on the proposed tags are useful in applications where reading range can be sacrificed in favor of high data capacity (large number of bits), e.g., security and authentication.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multistate multiresonator spectral signature barcodes implemented by means of S-shaped split ring resonators (S-SRR)

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
  • Zuffanelli, Simone
Spectral signature barcodes functional at the S frequency band are presented in this paper. The barcodes are implemented by loading a coplanar waveguide transmission line by means of multiple S-shaped split ring resonators (S-SRRs), each one tuned to a different frequency. The main particularity of this paper is the fact that more than two logic states (i.e., three or four, depending on the implementation) are assigned to each resonant element. By this means, the total number of bits of the barcode (for a given number of resonators) is increased, as compared with previous approaches based on two logic states per resonator. This multistate functionality is achieved by rotating the S-SRRs. Such rotation modulates the line-to-resonator coupling intensity, and consequently the notch depth at the S-SRR fundamental resonance. Therefore, by considering three or four fixed rotation angles (or orientations) between the line axis and the S-SRR (for the triand fourstate multiresonator barcodes, respectively), intermediate levels between the maximum and minimum attenuation are achieved. This multistate strategy only exploits a single frequency per resonant element (the fundamental one). Therefore, the data capacity per bandwidth are improved as compared with twostate-based barcodes or to multistate barcodes that use two frequencies per resonant element. As illustrative examples, two different four-state multiresonator barcodes with eight S-SRRs (providing 48 = 65.536 different codes, or 16 bits) and with nine S-SRRs (equivalent to 18 bits), occupying a spectral bandwidth of 1 GHz and less than 6.75 and 8.2 cm2, respectively, are designed, fabricated, and characterized.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High data density and capacity in chipless radiofrequency identification (chipless-RFID) tags based on double-chains of S-shaped split ring resonators (S-SRRs)

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
The data density per surface (DPS) is a figure of merit in chipless radiofrequency identification (chipless-RFID) tags. In this paper, it is demonstrated that chipless-RFID tags with high DPS can be implemented by using double-chains of S-shaped split ring resonators (S-SRRs). Tag reading is achieved by near-field coupling between the tag and the reader, a CPW transmission line fed by a harmonic signal tuned to the resonance frequency of the S-SRRs. By transversally displacing the tag over the CPW, the transmission coefficient of the line is modulated by tag motion. This effectively modulates the amplitude of the injected (carrier) signal at the output port of the line, and the identification (ID) code, determined by the presence or absence of S-SRRs at predefined and equidistant positions in the chains, is contained in the envelope function. The DPS is determined by S-SRR dimensions and by the distance between S-SRRs in the chains. However, by using two chains of S-SRRs, the number of bits per unit length that can be accommodated is very high. This chipless-RFID system is of special interest in applications where the reading distance can be sacrificed in favor of data capacity (e.g., security and authentication). Encoding of corporate documents, ballots, exams, etc., by directly printing the proposed tags on the item product to prevent counterfeiting is envisaged.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On-metal UHF-RFID passive tags based on complementary split-ring resonators

  • Zuffanelli, Simone
  • Zamora, Gerard|||0000-0001-6609-8643
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
The use of complementary split-ring resonators (CSRRs) as radiating elements in low-profile on-metal ultra-high-frequency radio-frequency identification (UHF-RFID) tags is explored in this study. First, the radiation properties of the edge-coupled and the non-bianisotropic (NB-CSRR) versions of the CSRR are studied. The tag design strategy is then discussed in detail. On that basis, a compact (λ0/7 × λ0/7) low-profile (1.27mm) tag prototype based on the non-bianisotropic version of the CSRR (NB-CSRR) antenna is designed and manufactured to operate in the North-American UHF-RFID band. The experimental results validate the theoretical and simulated behaviour, and exhibit a maximum read range of 6.8m.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Planar Yagi antenna array based on electrically small resonators for WLAN applications

  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Zuffanelli, Simone
  • Zamora, Gerard|||0000-0001-6609-8643
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
A novel planar Yagi-Uda antenna is presented in this letter. The proposed antenna uses electrically small resonators as radiating elements that behave as short electric dipoles. Its radiation pattern, gain, front-to-back ratio, and efficiency are maintained close to that of a Yagi-Uda antenna of stacked half-wavelength dipoles. However, its physical dimensions are consider- ably reduced. The choice of the resonant particle and its radiation properties, along with the antenna structure, are discussed. Simulated results show a good impedance matching (-29 dB) at the working frequency of 5.5 GHz for a 15-elements antenna, as well as a high gain (11.5 dBi). These characteristics are experimentally validated and compared to that of other Yagi-Uda designs from the literature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microwave microfluidic sensor based on a microstrip splitter/combiner configuration and split ring resonators (SRRs) for dielectric characterization of liquids

  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Grenier, Katia|||0000-0002-5056-5582
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Dubuc, David
  • Martín, Ferran|||0000-0002-1494-9167
A microwave microfluidic sensor for dielectric characterization of liquids in real time is presented in this paper. The sensor is implemented in microstrip technology and consists of a symmetric splitter/combiner configuration loaded with a pair of identical split ring resonators (SRRs) and microfluidic channels placed on top of them (gap region). The sensor works in differential mode and sensing is based on frequency splitting. Thus, if the structure is unloaded or if it is symmetrically loaded with regard to the axial plane, only one transmission zero (notch) in the frequency response appears. However, if the axial symmetry is disrupted (e.g., by the presence of different liquids in the channels), two transmission zeros arise, and the difference in magnitude (notch depth) and frequency between such transmission zeros is indicative of the difference in the dielectric properties (complex dielectric constant). A circuit schematic, including transmission line sections to describe the distributed components, lumped elements to account for the SRRs and their coupling to the lines and lumped elements to model the liquid properties, is presented and validated. After proper calibration, the functionality of the proposed sensor is demonstrated by measuring the complex permittivity in solutions of deionized water and ethanol as a function of the ethanol content.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Splitter/combiner microstrip sections loaded with pairs of complementary split ring resonators (CSRRs), modeling and optimization for differential sensing applications

  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Vélez, Paris|||0000-0001-6502-5987
  • Martín, Ferran|||0000-0002-1494-9167
This paper focuses on the analysis of splitter/ combiner microstrip sections where each branch is loaded with a complementary split ring resonator (CSRR). The distance between CSRRs is high, and hence, their coupling can be neglected. If the structure exhibits perfect symmetry with regard to the axial plane, a single transmission zero (notch) at the fundamental resonance of the CSRR, arises. Conversely, two notches (i.e., frequency splitting) appear if symmetry is disrupted, and their positions are determined not only by the characteristics of the CSRRs but also by the length of the splitter/combiner sections. A model that includes lumped elements (accounting for the CSRR-loaded line sections) and distributed components (corresponding to the transmission lines) is proposed and used to infer the position of the transmission zeros. Frequency splitting is useful for the implementation of differential sensors and comparators based on symmetry disruption. Using the model, the length of the splitter/combiner sections necessary to optimize the sensitivity of the structures as sensing elements is determined. Parameter extraction and comparison with electromagnetic simulations and measurements in several symmetric and asymmetric structures is used to validate the model. Finally, a prototype device sensor/comparator based on the proposed CSRR-loaded splitter/combiner microstrip sections is presented.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Coplanar waveguides loaded with symmetric and asymmetric pairs of slotted stepped impedance resonators, modeling, applications, and comparison to SIR-loaded CPWS

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
This article is focused on the analysis and modeling of coplanar waveguide (CPW) transmission lines loaded with pairs of slotted stepped impedance resonators (S-SIRs), etched in the ground planes. These structures may be described by a pair of parallel-connected transmission lines, each one loaded with a series-connected parallel resonator, and with mutual capacitive coupling between such resonators. If the structures are symmetric, the transmission coefficient exhibits a single transmission zero, related to the fundamental resonance of the SIRs, though perturbed by the effects of mutual coupling. However, if symmetry is disrupted, two notches appear, separated a distance that depends on the level of asymmetry, coupling, and CPW length. Therefore, these structures may be useful for the implementation of differential sensors and comparators. It is shown that if the S-SIR-loaded CPWs are electrically small, the structures can be modeled by a lumped element equivalent circuit. Using this model, the resonance frequencies are obtained analytically. The proposed lumped element model is validated through electromagnetic simulation and experiment, and a prototype comparator loaded with dielectric samples is fabricated and measured. Finally, the circuit model of the structure is compared to that of SIR-loaded CPW transmission lines. Despite the fact that the lumped element equivalent circuits of these structures are completely different, the equations providing the transmission zeros are formally identical.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A review of sensing strategies for microwave sensors based on metamaterial-inspired resonators, dielectric characterization, displacement, and angular velocity measurements for health diagnosis, telecommunication, and space applications

  • Su, Lijuan|||0000-0002-4753-9340
  • Vélez, Paris|||0000-0001-6502-5987
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
Four sensing approaches for the implementation of microwave sensors based on transmission lines loaded with metamaterial-inspired resonators are considered in this review paper, and examples of applications are pointed out. In all the cases, sensing is based on the effects that the magnitude under measurement causes in the transmission properties of the resonator-loaded line. Such four strategies are (i) resonance frequency variation, (ii) coupling modulation through symmetry disruption (causing variation of the notch depth), (iii) frequency splitting (also exploiting symmetry properties), and (iv) amplitude modulation of a harmonic signal. Such sensors are useful in various scenarios, of interest in fields as diverse as characterization of dielectric materials for communication circuits, medical diagnosis and treatment with microwave technologies, and sensors for space applications, among others.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Transmission lines loaded with pairs of stepped impedance resonators, modeling and application to differential permittivity measurements

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Damm, Christian
  • Wiens, Alex
  • Jakoby, Rolf
  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
Differential techniques are widely used in communication and sensor systems, as these techniques have been shown to improve the performance. This paper shows how differential sensing of permittivity can be conducted in a simple way. For that purpose, a microstrip line loaded with a pair of stepped-impedance resonators is used in two different resonator connections: parallel and cascade. Each resonator is individually perturbed dielectrically so that: 1) when the two individual permittivities are identical, the structure exhibits a single resonance frequency and 2) when the permittivities are different, resonance frequency splitting occurs, giving rise to two resonances (all these resonances are seen in the form of transmission zeroes). The two sensing approaches are successfully validated through electromagnetic simulations and experiments. By virtue of a differential measurement, robustness against changing ambient factors that may produce sensor miscalibration is expected.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The beauty of symmetry, common-mode rejection filters for high-speed interconnects and band microwave circuits

  • Martín, Ferran|||0000-0002-1494-9167
  • Vélez, Paris|||0000-0001-6502-5987
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martel, Jesús
  • Medina, Francisco|||0000-0002-9947-506X
Common-mode rejection filters operating at microwave frequencies have been the subject of intensive research activity over the last decade. These filters are of interest for the suppression of common-mode noise in high-speed digital circuits, where differential signals are widely employed due to the high immunity to noise, electromagnetic (EM) interference, and crosstalk of differential-mode interconnects. These filters can also be used to improve common-mode rejection in microwave filters and circuits dealing with differential signals. Ideally, common-mode stopband filters should be transparent for the differential mode from dc up to very high frequencies (all pass), preserve the signal integrity for such mode, and exhibit the widest and deepest possible rejection band for the common mode in the region of interest. Moreover, these characteristics should be achieved by means of structures with the smallest possible size.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Analytical method to estimate the complex permittivity of oil samples

  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Vélez, Paris|||0000-0001-6502-5987
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, an analytical method to estimate the complex dielectric constant of liquids is presented. The method is based on the measurement of the transmission coefficient in an embedded microstrip line loaded with a complementary split ring resonator (CSRR), which is etched in the ground plane. From this response, the dielectric constant and loss tangent of the liquid under test (LUT) can be extracted, provided that the CSRR is surrounded by such LUT, and the liquid level extends beyond the region where the electromagnetic fields generated by the CSRR are present. For that purpose, a liquid container acting as a pool is added to the structure. The main advantage of this method, which is validated from the measurement of the complex dielectric constant of olive and castor oil, is that reference samples for calibration are not required.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Broadband UHF-RFID passive tag based on split-ring resonator (SRR) and T-match network

  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
A novel broadband design of a planar passive UHF-RFID tag based on a split-ring resonator (SRR) antenna and the T-match network is presented in this work. The radiation properties of the SRR working at its second resonance are exploited to design a radio frequency identification (RFID) tag for the first time. The potential usefulness of the T-match based design methodology to achieve perfect matching between the SRR antenna and any typical RFID chip is demonstrated. A 0.23 λ₀ × 0.23 λ₀ tag has been fabricated. The measured read range is higher than 13 m within the whole UHF-RFID band with a peak value of 16 m at 915 MHz.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Near-field chipless radio-frequency identification (RFID) sensing and identification system with switching reading

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Moras Albero, Miquel|||0000-0003-3397-2730
  • Núñez, Alba|||0000-0003-3529-7986
  • Ramon, Eloi|||0000-0001-9974-8112
  • Martín, Ferran|||0000-0002-1494-9167
A chipless radio-frequency identification (chipless-RFID) and sensing system, where tags are read by proximity (near-field) through a switch, is presented. The tags consist of a set of identical resonant elements (split-ring resonators or SRRs), printed or etched at predefined and equidistant positions, forming a linear chain, each SRR providing a bit of information. The logic state ('1' or '0') associated with each resonator depends on whether it is present or not in the predefined position. The reader is an array of power splitters used to feed a set of SRR-loaded transmission lines (in equal number to the number of resonant elements, or bits, of the tag). The feeding (interrogation) signal is a harmonic (single-tone) signal tuned to a frequency in the vicinity of the fundamental resonance of the SRRs. The set of SRR-loaded lines must be designed so that the corresponding SRRs are in perfect alignment with the SRRs of the tag, provided the tag is positioned on top of the reader. Thus, in a reading operation, as long as the tag is very close to the reader, the SRRs of the tag modify (decrease) the transmission coefficient of the corresponding reader line (through electromagnetic coupling between both SRRs), and the amplitude of the output signal is severely reduced. Therefore, the identification (ID) code of the tag is contained in the amplitudes of the output signals of the SRR-loaded lines, which can be inferred sequentially by means of a switching system. Unlike previous chipless-RFID systems based on near-field and sequential bit reading, the tags in the proposed system can be merely positioned on top of the reader, conveniently aligned, without the need to mechanically place them across the reader. Since tag reading is only possible if the tag is very close to the reader, this system can be also used as a proximity sensor with applications such as target identification. The proposed chipless-RFID and sensing approach is validated by reading a designed 4-bit tag. For identification purposes, this system is of special interest in applications where a low number of bits suffice, and tag reading by proximity is acceptable (or even convenient). Applications mostly related to secure paper, particularly involving a limited number of items (e.g., exams, ballots, etc.), in order to provide authenticity and avoid counterfeiting, are envisaged. As a proximity sensor, the system may be of use in detecting and distinguishing different targets in applications such as smart packaging.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Upper bounds on the bandwidth of electrically small single-resonant UHF-RFID tags

  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
In this communication, the upper limits on the bandwidth of single-resonant UHF-radio frequency identification (RFID) tags as a function of the tag size are investigated, with and without forcing perfect matching between the antenna and the application-specific integrated circuit. By means of a circuit network analysis, it is found that bandwidth upper bounds of small tags are significantly higher in comparison with considering conjugate matching. Particularly, it is shown that the half-power bandwidth is √2 times (approximately 41%) higher, requiring a proper relaxation of the matching level at resonance. It is also shown that bandwidth of small real tags with perfect matching, which is typically far from its upper bound, can also be enhanced approximately the same factor at the expense of a small reduction (13.4%) in the peak read range. A practical example is provided, where two small split-ring resonator-based tags of the same size (k 0 a = 0.31) are designed. It demonstrates that such improvement on the tag bandwidth can be approximately obtained by simply changing the chip position, without the need of an external matching network. The improved tag was fabricated and measured, as a proof of concept. The results obtained from the proposed analysis allow RFID designers to determine how well a tag performs, compared to theoretical bandwidth limits.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Split ring resonator-based microwave fluidic sensors for electrolyte concentration measurements

  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Grenier, Katia|||0000-0002-5056-5582
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Dubuc, David
  • Martín, Ferran|||0000-0002-1494-9167
A differential microwave sensor, based on a pair of uncoupled microstrip lines each one loaded with a split ring resonator (SRR), is applied to the measurement of electrolyte concentration in deionized (DI) water. For that purpose, fluidic channels are added on top of the SRR gaps, the most sensitive parts of the structure. The operating principle is based on the measurement of the cross-mode insertion loss, highly sensitive to small asymmetries caused by differences between the reference liquid and the liquid under test (LUT). In this paper, the reference liquid is pure DI water (the solvent), whereas the solution, DI water with electrolyte content, is injected to the LUT channel. The proposed sensor is able to detect electrolyte concentrations as small as 0.25 g/L, with maximum sensitivity of 0.033 (g/L) ⁻¹ . The sensor is validated by measuring the concentration of three types of electrolytes, i.e., NaCl, KCl, and CaCl2. Finally, the sensor is applied to monitor variations of total electrolyte concentration in urine samples.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Near-field chipless-RFID tags with sequential bit reading implemented in plastic substrates

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Núñez, Alba|||0000-0003-3529-7986
  • Ramon, Eloi|||0000-0001-9974-8112
  • Martín, Ferran|||0000-0002-1494-9167
Chipless radiofrequency identification (chipless-RFID) systems based on near-field coupling between the tag and the reader and sequential bit reading, with tags implemented on plastic substrates, are presented in this paper. In the proposed system, the tag is a set of identical resonant elements (S-shaped split ring resonators - S-SRRs), inkjet-printed on a plastic substrate (PEN), forming a resonator chain. The presence or absence of resonant elements at predefined and equidistant positions in the chain determines the logic state '1' and '0', respectively, associated with each resonant element. The reader is a coplanar waveguide (CPW) transmission line fed by a harmonic signal tuned to the resonance frequency of the resonant elements of the chain. Tag reading is achieved by displacing the chain of resonant elements above the CPW transmission line, in close proximity to it, so that near-field coupling between the CPW transmission line and the resonant elements of the tag results. By this means, the injected carrier signal is amplitude modulated, provided the transmission coefficient of the line varies with the presence or absence of resonant elements in the chain, and the identification (ID) code is contained in the envelope function. The functionality of the proposed system, with 10-bit tags occupying an area of 1.35 cm2 (corresponding to an information density of 7.4 bit/cm²), is demonstrated.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Metasurfaced Reverberation Chamber

  • Sun, Hengyi
  • Li, Zhuo
  • Gu, Changqing
  • Xu, Qian
  • Chen, Xinlei
  • Sun, Yunhe
  • Lu, Shengchen
  • Martín, Ferran|||0000-0002-1494-9167
The concept of metasurfaced reverberation chamber (RC) is introduced in this paper. It is shown that by coating the chamber wall with a rotating 1-bit random coding metasurface, it is possible to enlarge the test zone of the RC while maintaining the field uniformity as good as that in a traditional RC with mechanical stirrers. A 1-bit random coding diffusion metasurface is designed to obtain all-direction backscattering under normal incidence. Three specific cases are studied for comparisons, including a (traditional) mechanical stirrer RC, a mechanical stirrer RC with a fixed diffusion metasurface, and a RC with a rotating diffusion metasurface. Simulation results show that the compact rotating diffusion metasurface can act as a stirrer with good stirring efficiency. By using such rotating diffusion metasurface, the test region of the RC can be greatly extended.