Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Long-term non-isothermal reactive transport model of compacted bentonite, concrete and corrosion products in a HLW repository in clay

  • Mon, Alba
  • Samper, Javier
  • Montenegro, Luis
  • Naves, Acacia
  • Fernández Ruiz, Jesús
Versión aceptada de https://doi.org/10.1016/j.jconhyd.2016.12.006, [Abstract:] Radioactive waste disposal in deep geological repositories envisages engineered barriers such as carbon-steel canisters, compacted bentonite and concrete liners. The stability and performance of the bentonite barrier could be affected by the corrosion products at the canister-bentonite interface and the hyper-alkaline conditions caused by the degradation of concrete at the bentonite-concrete interface. Additionally, the host clay formation could also be affected by the hyper-alkaline plume at the concrete-clay interface. Here we present a non-isothermal multicomponent reactive transport model of the long-term (1 Ma) interactions of the compacted bentonite with the corrosion products of a carbon-steel canister and the concrete liner of the engineered barrier of a high-level radioactive waste repository in clay. Model results show that magnetite is the main corrosion product. Its precipitation reduces significantly the porosity of the bentonite near the canister. The degradation of the concrete liner leads to the precipitation of secondary minerals and the reduction of the porosity of the bentonite and the clay formation at their interfaces with the concrete liner. The reduction of the porosity becomes especially relevant at t = 104 years. The zones affected by pore clogging at the canister-bentonite and concrete-clay interfaces at 1 Ma are approximately equal to 1 and 3.3 cm thick, respectively. The hyper-alkaline front (pH > 8.5) spreads 2.5 cm into the clay formation after 1 Ma. Our simulation results share the key features of the models reported by others for engineered barrier systems at similar chemical conditions, including: 1) Pore clogging at the canister-bentonite and concrete-clay interfaces; 2) Narrow alteration zones; and 3) Limited smectite dissolution after 1 Ma., The research leading to this work has received funding from the PEBS Project of the European Atomic Energy Community's Seventh Framework Programme (FP7/2007-2011) under grant agreement #232598 and the CEBAMA Project of the European Atomic Energy Community's (Euratom) Horizon 2020 Programme (NFRP-2014/2015) under grant agreement # 662147. This work was partly funded by ENRESA (Spain), the Spanish Ministry of Economy and Competitiveness (Projects CGL2012-36560 and CGL2016-78281) with support from the FEDER funds and the Galician Regional Government (Project 10MDS118028PR and Fund 2012/181 from “Consolidación e estruturación de unidades de investigación competitivas”, Grupos de referencia competitiva). The first author enjoyed a research contract from University of A Coruña and the fifth author had a Contract from the FPI Program of the Spanish Ministry of Economy and Competitiveness., Xunta de Galicia; 10MDS118028PR, Xunta de Galicia; 2012/181
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

THCM numerical simulations of the engineered barrier system for radioactive waste disposal

  • Samper, Javier
  • Mon, Alba
  • Montenegro, Luis
  • Naves, Acacia
Versión aceptada de: https://doi.org/10.1680/jenge.19.00104, [Abstract:] The final disposal of high-level radioactive waste in geological repositories envisages an engineered barrier system with a bentonite buffer, which will be subjected to strongly coupled thermal, hydrodynamic, geochemical and mechanical (THCM) processes. This paper presents coupled THCM numerical simulations of laboratory and in situ tests performed with compacted Full-scale Engineered Barrier Experiment (Febex) bentonite having different space and time scales. The simulations of the heating and hydration tests fit the measured temperature, water content and water intake data and reproduce the trends of the geochemical data. Although simulation results of the tests display similar trends, they show differences due to geometry and initial and confining conditions. The changes in porosity due to mineral dissolution/precipitation are not relevant in these tests but become relevant in long-term simulations, which show that the precipitation of corrosion products reduces significantly the porosity of the bentonite near the canister and causes pore clogging. The thickness of the bentonite alteration band is simulated to be smaller than 7 cm after 1 Ma., The research leading to these results received funding from the PEBS Project of the European Atomic Energy Community’s Seventh Framework Programme (FP7/2007-2011) under grant agreement 232598. This work was partly funded by ENRESA (Spain), the Spanish Ministry of Economy and Competitiveness and FEDER Funds (Project CGL2016 78281) and Galicia Regional Government (Fund ED431C 2017/67 from “Consolidación e estruturación de unidades de investigación competitivas”, Grupos de referencia competitiva). Alba Mon enjoyed a research contract from University of A Coruña. We thank the comments and corrections of the two anonymous reviewers because they contributed to improve the manuscript., Xunta de Galicia; ED431C 2017/67
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Reactive transport modelling of the long-term interactions of corrosion products and compacted bentonite in a HLW repository in granite: Uncertainties and relevance for performance assessment

  • Samper, Javier
  • Naves, Acacia
  • Montenegro, Luis
  • Mon, Alba
Versión aceptada de https://doi.org/10.1016/j.apgeochem.2016.02.001, [Abstract:] Here we present a long-term nonisothermal reactive transport model for the interactions of the corrosion products of a carbon-steel canister and the compacted bentonite of the engineered barrier of a high-level radioactive waste repository in granite. Canister corrosion causes an increase in the pH and the concentration of dissolved Fe2+ of the bentonite porewater. Iron precipitates as magnetite and siderite and sorbs via cation exchange and surface complexation on weak sites. Magnetite precipitation reduces significantly the porosity of the bentonite near the canister. The thickness of the zone of reduced porosity is 7 cm at t = 1 Ma. This thickness increases significantly when the dependence of the corrosion rate on the chemical conditions is considered and decreases 3 cm when smectite dissolution and analcime precipitation are taken into account. Model results are not significantly sensitive to the thermal transient and the effect of temperature on the corrosion rate. The conclusions of our simulations are consistent for the most part with those reported by others for engineered barrier systems at similar chemical conditions., Xunta de Galicia; 10MDS118028PR, Xunta de Galicia; 2012/181, The research leading to this work has received funding from the PEBS Project of the European Atomic Energy Community's Seventh Framework Programme (FP7/2007–2011) under grant agreement 232598. This work was partly funded by ENRESA (Spain), the Spanish Ministry of Economy and Competitiveness (Project CGL2012-36560), FEDER funds and the Galician Regional Government (Project 10MDS118028 PR and Fund 2012/181 from “Consolidación e estruturación de unidades de investigación competitivas”, Grupos de referencia competitiva). We thank the comments, corrections and suggestions of the two anonymous reviewers which contributed to the improvement of the paper.