Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Low-pH cement mortar-bentonite perturbations in a small-scale pilot laboratory experiment

  • González Santamaría, Daniel
  • Angulo, M.
  • Fernández Martín, Raúl
  • Ortega, A.
  • Cuevas Rodríguez, Jaime Fernando
  • Ruiz García, Ana Isabel
This article has been published in a revised form in Clay Minerals [http://doi.org/10.1180/clm.2018.16]. This version is free to view and download for private research and study only. Not for re-distribution, re-sale or use in derivative works, A novel method to perform small-scale laboratory experiments that reproduce concrete–bentonite and concrete–groundwater interactions has been developed. Such interfaces will prevail in engineered barrier systems used for isolation of nuclear waste. With the goal of optimizing the experimental method, this work has analysed the geochemical interaction of distilled water, low-pH cement mortar and FEBEX-bentonite for 75 days. Limited but evident reactivity between the materials was observed, mainly decalcification in cement mortar, carbonation at the interface with bentonite and Mg enrichment in bentonite. These results are consistent with the state-of-the-art literature and were used to validate this small-scale pilot laboratory experiment to establish the basis for further studies comparing the behaviour of different buffer and cement materials, The research leading to these results has received funding from the European Union's Horizon 2020 Research and Training 305 Programme of the EURATOM (H2020-NFRP-2014/2015) under grant agreement n° 662147 (CEBAMA)
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

High-pH/low pH ordinary Portland cement mortars impacts on compacted bentonite surfaces: application to clay barriers performance

  • González Santamaría, Daniel
  • Fernández Martín, Raúl
  • Ortega, Almudena
  • Cuevas Rodríguez, Jaime Fernando
  • Ruiz García, Ana Isabel
The design of engineered barrier systems for high-level radioactive waste isolation requires the use of cement-based materials. Small-scale surface reactivity interface experiments were designed to perform a reference laboratory study. It simulated granitic groundwater infiltration through cement mortar/bentonite (CB) binary columns. The tests ran duplicated over 6 and 18 months and included low-pH, CEM I and CEM II ordinary Portland cement mortars in contact with bentonite. After the experiments, the materials were analysed using scanning electron microscopy attached to energy dispersive energy X-ray analysis (EDX), surface mineralogy using grazing incidence X-ray diffraction configurations, specific surface area and effluent chemistry. EDX chemical profiles measured from CB interface contact reproduced, in 100 μm to 1 mm thickness, a characteristic geochemical Mg perturbation in the bentonite and calcite precipitation in cement materials. These processes are known to be developed in 10–15-years within < 5 mm of the interface. The comparison of these long, large scale experiments with the small scale experiments showed that the chemical perturbation thickness development rate will decrease over time. The limestone addition (CEM II) leaves less room for calcite precipitation, and ettringite became stabilized, which limited the extent of dissolution-precipitation processes. Then, the CEM II mortar had better resistance to perturbation, The experimental work was supported by funding from the European Union's Horizon 2020 Research and Training programme from EURATOM [H2020-NFRP 2014, 2015] under grant agreement n°662147; CEBAMA
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Authigenic clay minerals from interface reactions of concrete-clay engineered barriers: A new perspective on MG-clays formation in alkaline environments

  • Cuevas Rodríguez, Jaime Fernando
  • Fernández Martín, Raúl
  • Ruiz García, Ana Isabel
  • González Santamaría, Daniel
  • Angulo, María
  • Ortega, Almudena
  • Torres, Elena
  • Turrero, María Jesús
Artificial and singular geochemical environments are created around the engineered barrier systems (EBS) designed to isolate high level nuclear wastes in deep geological repositories. A concrete-bentonite interface takes place within the EBS and it builds a significant chemical gradient (pH), approximately from pH 8 (bentonite) to pH 12 (low alkali concrete), in a few millimetre thickness. This disequilibrium triggers dissolution and precipitation reactions and form a thin altered region. In this area, poorly ordered authigenic clay minerals, mainly hydrated magnesium silicates, are formed adjacent to hydrated calcium silicates and calcite precipitates adhered to the interface with concrete. This paper presents the development of this authigenic mineral layer comparing 6–18 months to 13 years interfaces. Scanning Electron Microscopy with Energy Dispersive X-ray spectroscopy (SEM-EDX) morphological and chemical characterization with the aid of ternary plots, X-ray diffraction (XRD) and infrared (IR) data show the young to old interface evolution from single brucite layers to stevensite-saponite silicates composition. Geochemical calculations indicate that this layer acts as a pH~11 buffer useful to minimize bentonite alteration and to favour the retention of amphoteric metal ions, This work has been in part financially supported by the Full-Scale Engineered Barrier Experiment Dismantling Project (FEBEX-DP) consortium (http://www.grimsel.com/gts-phase-vi/febex-dp/febex-dp-introduction) for dismantling and overcoring sampling. The research leading to these results has received funding from the European Union’s Horizon 2020 Research and Training Programme of the European Atomic Energy Community (EURATOM) (H2020-NFRP-2014/2015) under grant agreement No. 662147 (CEBAMA). Acknowledgments: To E. Rodríguez Cañas (KIKE), for his very good skills and aid in electron microscopy data adquisition in SIdI-UAM university service. his work has been in part financially supported by the Full-Scale Engineered Barrier Experiment Dismantling Project (FEBEX-DP) consortium (http://www.grimsel.com/gts-phase-vi/febex-dp/febex-dp-introduction) for dismantling and overcoring sampling. The research leading to these results has received funding from the European Union’s Horizon 2020 Research and Training Programme of the European Atomic Energy Community (EURATOM) (H2020-NFRP-2014/2015) under grant agreement No. 662147 (CEBAMA).
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Stable isotopes applied to the study of the concrete/bentonite interaction in the FEBEX in situ test

  • Torres, E.
  • Turrero, M. J.
  • Garralón, A.
  • Cuevas Rodríguez, Jaime Fernando
  • Fernández Martín, Raúl
  • Ortega, A.
  • Ruiz García, Ana Isabel
Stable isotope analysis was carried out on a set of samples from the concrete-bentonite interface from the FEBEX real-scale in-situ experiment. The concrete and bentonite that simulated the engineering barriers system of a deep geological repository have interacted for 13 years in saturated conditions up to dismantling. The monitoring of the experiment during the years of operation has made possible to know not only the baseline status but also the evolution of the system and the mass transfer processes. Thus, the FEBEX experiment has been a unique opportunity to study concrete degradation within a broader multi-proxy approach under real-scale repository conditions. Analysis of carbon and oxygen isotopes of carbonates in groundwater, concrete and clay have provided evidence of how dissolution and mass transfer processes occur in the Engineered Barrier System (EBS). Spatial distribution of δ13C values points to the existence of a dominant process of diffusion of carbon species from bentonite towards the concrete/bentonite interface. Variations in δ18O values suggest a non-homogeneous geochemical and hydraulic behavior of the EBS in the vicinity of both, the granite-concrete interface and the concrete-bentonite interface. These differences might be related to different degrees of exposure of each sample to bentonite porewater, groundwater and concrete/bentonite leachates. This seem to be in agreement with the existence of different chemical environments depending on the location of the samples in the experiment., The work was financially supported by the European Union's Horizon 2020 grant agreement n° 662147 (www.cebama.eu) and the Annex XLII of the ENRESA-CIEMAT framework agreement. The FEBEX project was financed by ENRESA and the EC Contracts FI4W-CT95-006 and FIKWCT-2000-00016. The FEBEX-DP Consortium (NAGRA, SKB, POSIVA, CIEMAT, KAERI) financed the dismantling operation and onsite determinations in 2015.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Long-term non-isothermal reactive transport model of compacted bentonite, concrete and corrosion products in a HLW repository in clay

  • Mon, Alba
  • Samper, Javier
  • Montenegro, Luis
  • Naves, Acacia
  • Fernández Ruiz, Jesús
Versión aceptada de https://doi.org/10.1016/j.jconhyd.2016.12.006, [Abstract:] Radioactive waste disposal in deep geological repositories envisages engineered barriers such as carbon-steel canisters, compacted bentonite and concrete liners. The stability and performance of the bentonite barrier could be affected by the corrosion products at the canister-bentonite interface and the hyper-alkaline conditions caused by the degradation of concrete at the bentonite-concrete interface. Additionally, the host clay formation could also be affected by the hyper-alkaline plume at the concrete-clay interface. Here we present a non-isothermal multicomponent reactive transport model of the long-term (1 Ma) interactions of the compacted bentonite with the corrosion products of a carbon-steel canister and the concrete liner of the engineered barrier of a high-level radioactive waste repository in clay. Model results show that magnetite is the main corrosion product. Its precipitation reduces significantly the porosity of the bentonite near the canister. The degradation of the concrete liner leads to the precipitation of secondary minerals and the reduction of the porosity of the bentonite and the clay formation at their interfaces with the concrete liner. The reduction of the porosity becomes especially relevant at t = 104 years. The zones affected by pore clogging at the canister-bentonite and concrete-clay interfaces at 1 Ma are approximately equal to 1 and 3.3 cm thick, respectively. The hyper-alkaline front (pH > 8.5) spreads 2.5 cm into the clay formation after 1 Ma. Our simulation results share the key features of the models reported by others for engineered barrier systems at similar chemical conditions, including: 1) Pore clogging at the canister-bentonite and concrete-clay interfaces; 2) Narrow alteration zones; and 3) Limited smectite dissolution after 1 Ma., The research leading to this work has received funding from the PEBS Project of the European Atomic Energy Community's Seventh Framework Programme (FP7/2007-2011) under grant agreement #232598 and the CEBAMA Project of the European Atomic Energy Community's (Euratom) Horizon 2020 Programme (NFRP-2014/2015) under grant agreement # 662147. This work was partly funded by ENRESA (Spain), the Spanish Ministry of Economy and Competitiveness (Projects CGL2012-36560 and CGL2016-78281) with support from the FEDER funds and the Galician Regional Government (Project 10MDS118028PR and Fund 2012/181 from “Consolidación e estruturación de unidades de investigación competitivas”, Grupos de referencia competitiva). The first author enjoyed a research contract from University of A Coruña and the fifth author had a Contract from the FPI Program of the Spanish Ministry of Economy and Competitiveness., Xunta de Galicia; 10MDS118028PR, Xunta de Galicia; 2012/181
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Reactive transport modelling of a low-pH concrete / clay interface

  • Idiart, Andrés
  • Laviña, Marcelo
  • Kosakowski, Georg
  • Cochepin, Benoit
  • Meeussen, Johannes C.L.
  • Samper, Javier
  • Mon, Alba
  • Montoya, Vanessa
  • Munier, Isabelle
  • Poonoosamy, Jenna
  • Montenegro, Luis
  • Deissmann, Guido
  • Rohmen, Stephan
  • Damiani, Leonardo Hax
  • Coene, Emilie
  • Naves, Acacia
Versión aceptada de https://doi.org/10.1016/j.apgeochem.2020.104562, [Abstract:] Cement-based materials are key components in the barrier system and structural support of repositories for disposal of nuclear waste. As such, increased understanding of their long-term performance under repository conditions is paramount for the safety assessment. Quantification of the impact that cement-based materials could have on the surrounding barriers and the host rock is essential to assess long-term safety of the repository system. This interaction can impact the physical properties of the system near the interface and needs to be assessed by means of numerical modelling. A reactive transport modelling study of the interaction between a newly-developed low-pH concrete and a clay host rock (i.e. Callovo Oxfordian) over 100,000 years is presented here. The main goal is to build confidence in the consistency of the different modelling approaches and in the application of different reactive transport codes (iCP, ORCHESTRA, OpenGeosys-GEM, CORE2D, and MIN3P) to analyse the performance of the recently developed low-pH concrete within the CEBAMA project. A common setup of a reference case was established, including precipitation/dissolution reactions, redox and cation exchange processes, building upon preliminary cases of increasing complexity. In addition, a set of sensitivity cases was simulated to test the effect of key geochemical and transport parameters on the results, including the impact of porosity changes on the diffusion coefficient and electrochemical couplings. Different reactive transport codes were used in the benchmark. Overall, the results show not only the high level of understanding of the governing processes but also the good agreement obtained with different codes, which is essential to demonstrate the applicability of reactive transport modelling to support safety assessment. The sensitivity and preliminary cases modelled show that the results obtained are much more sensitive to changes to transport parameters and couplings than to the different modelling tools used in each case. In addition, the impact of including or not the slow kinetics of dissolution of the claystone minerals is shown to be negligible in the studied scenarios., The research leading to these results has received funding from the European Union's European Atomic Energy Community's Horizon 2020 Programme (NFRP-2014/2015) under grant agreement, 662147 – CEBAMA. V. Montoya., J. Poonoosamy and G. Deissmann acknowledge the German Federal Ministry of Education and Research (Grant 02NUK053A) and the Initiative and Networking Fund of the Helmholtz Association (Grant SO-093) within the iCross project for partial funding. The authors would like to thank Barbara Lothenbach for fruitful discussions on modelling cement hydration of the low-pH cement system and the two reviewers for constructive and valuable comments that have helped to improve the manuscript., Alemania. German Federal Ministry of Education and Research; 02NUK053A, Alemania. Initiative and Networking Fund of the Helmholtz Association; SO-093
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Coupled THCM model of a heating and hydration concrete-bentonite column test

  • Samper, Javier
  • Mon, Alba
  • Montenegro, Luis
  • Cuevas, Jaime
  • Turrero, María J.
  • Naves, Acacia
  • Fernández, Raúl
  • Torres, Elena
Versión aceptada de https://doi.org/10.1016/j.apgeochem.2018.05.007, [Abstract] Radioactive waste disposal in deep geological repositories in clay formations envisage a compacted bentonite engineered barrier and a concrete liner. The alkaline conditions caused by the degradation of concrete could affect the performance of the engineered barrier. The geochemical interactions occurring at the concrete-bentonite interface (B-CI) for the non-isothermal unsaturated conditions prevailing at repository post-closure have been studied by CIEMAT with a heating and hydration concrete-bentonite column test. The column consists of a 3 cm thick concrete sample emplaced on top of a 7.15 cm block of compacted bentonite. The column was hydrated through the concrete at a constant pressure with a synthetic clay porewater while the bottom of the column was heated at 100 °C. Here we report a coupled thermo-hydro-chemical-mechanical (THCM) model of the column test, which lasted 1610 days. The model was solved with a THCM code, INVERSE-FADES-CORE. Experimental observations show calcite and brucite precipitation in the concrete near the hydration boundary, portlandite dissolution and calcite and ettringite precipitation in the concrete, calcite and sepiolite precipitation in the bentonite near the B-CI, calcite dissolution in the bentonite far from the B-CI and gypsum precipitation in the bentonite near the heater. Model results attest that advection is relevant during the first months of the test. Later, solute diffusion becomes the dominant transport mechanism. Calcite and brucite precipitate in the concrete near the hydration boundary because the concentrations of dissolved bicarbonate and magnesium in the hydration water are larger than the initial concentrations in the concrete porewater. Calcite and brucite precipitate in both sides of the B-CI. Sepiolite precipitates in the bentonite near the B-CI. The model predicts portlandite and C1.8SH dissolution in the concrete. Ettringite and C0.8SH precipitate near the hydration boundary while ettringite dissolves in the rest of the concrete at very small rates. The porosity changes occur at the hydration boundary and at both sides of the B-CI due to mineral dissolution/precipitation. The porosity reduces to zero in a 0.03 cm thick zone in the concrete near the B-CI due to brucite and calcite precipitation. The high pH front (pH > 8.5) diffuses from the concrete into the bentonite and penetrates 1 cm at the end of the test after 1610 days. Model results are sensitive to grid size. Mineral precipitation and the thickness of the zone affected by mineral precipitation in the bentonite near the B-CI increase when the grid size increases while pore clogging in the concrete near the B-CI is computed only for grid sizes smaller than 0.018 cm. The non-isothermal conditions play an important role in mineral precipitation. The reduction in porosity in the B-CI for constant temperature is smaller than that of the non-isothermal run. The model reproduces the on-line measured temperature and relative humidity data as well as the water content and porosity data collected at the end of the test. Model results capture the main trends of the mineralogical observations, except for ettringite and CSH phases for which the predicted precipitation is smaller than the observed values. Model results improve when the specific surface of ettringite is increased by a factor of 10., The research leading to these results has received funding from the European Union's European Atomic Energy Community's (Euratom) Horizon 2020 Programme (NFRP-2014/2015) under grant agreement, 662147 – CEBAMA. This work was partly funded by the Spanish Ministry of Economy and Competitiveness (Grant number CGL2016-78281) with support from the FEDER funds and the Galician Regional Government (Grant number ED431C 2017/67 from “Consolidación e estruturación de unidades de investigación competitivas”, Grupos de referencia competitiva). The second author enjoyed a research contract from University of A Coruña. We thank the comments, corrections and suggestions of the Guest Editor and the two anonymous reviewers who contributed to the improvement of the paper., Xunta de Galicia; ED431C 2017/67
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Dynamic update of flow and transport parameters in reactive transport simulations of radioactive waste repositories

  • Fernández Águila, Jesús
  • Samper, Javier
  • Mon, Alba
  • Montenegro, Luis
Versión aceptada de https://doi.org/10.1016/j.apgeochem.2020.104585, [Abstract:] The changes in porosity caused by mineral dissolution/precipitation and the associated changes in flow, transport and chemical parameters of porous and fractured media are relevant for the geochemical time-evolution of natural and engineered underground systems. The realistic representation of natural systems requires modeling tools accounting for the changes in porosity. Here, we investigate the significance of the dynamic upgrade of the flow, transport and chemical parameters in reactive transport models with mineral dissolution/precipitation. The water flow, heat transfer and multicomponent reactive solute transport code, CORE2DV5, was extended to take into account the changes in porosity provoked by mineral dissolution/precipitation and their effect on flow, solute transport and chemical parameters. The improvements implemented in the code were verified against analytical solutions and the numerical solutions computed with other reactive transport codes with similar capabilities for isothermal mineral dissolution/precipitation test cases. Model results computed with CORE2DV5 agree with the analytical and numerical solutions for several isothermal test cases with porosity feedback. Model results show that failing to account for the porosity feedback leads to large errors. The porosity feedback effect (PFE) is especially relevant in long-term problems with mineral dissolution/precipitation leading to strong changes in porosity. The PFE is analysed with a non-isothermal geochemically-reactive transport model of the long-term (4·104 years) interactions of compacted bentonite with corrosion products and concrete in a high-level radioactive waste repository in clay. The model predicts pore clogging in the concrete and at the concrete-clay interface. The thickness of the zone affected by pore clogging computed with the PFE is smaller than that computed without the PFE., This work was funded by the CEBAMA Project of the European Atomic Energy Community's (Euratom) Horizon 2020 Programme (NFRP-2014/2015) under grant agreement # 662147, the Spanish Ministry of Economy and Competitiveness (Project CGL2016-78281), the FEDER funds, ENRESA (Spain), and the Xunta de Galicia (Galician Regional Government, project ED431C 2017/67). The first author enjoyed a Contract from the FPI Program of the Spanish Ministry of Economy and Competitiveness. We thank the comments and corrections of the three anonymous reviewers who contributed to the improvement of the paper., Xunta de Galicia; ED431C 2017/67
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Bentonite/CEM-II cement mortar INTERFACE EXPERIMENTS: A proxy to in situ deep geological repository engineered barrier system surface reactivity

  • González Santamaría, Daniel
  • Fernández Martín, Raúl
  • Ortega, Almudena
  • Cuevas Rodríguez, Jaime Fernando
  • Ruiz García, Ana Isabel
The present study focuses on the interaction between cement mortar (OPC-based CEM-II) and the FEBEXbentonite; this interaction takes place at a small spatial scale (~1 cm/~1 cm; compacted cement mortar/compacted bentonite thickness) within a timeline of 6 and 18 months. This work was designed to determine the early interaction processes and compare them with large-scale FEBEX in situ underground research laboratory experiments. The study aimed at the primary reactions that occurred at the interface in a small spatial scale (nm- μm scale). The experimental device consisted of a composite column containing the cement mortar/bentonite materials. A granitic groundwater solution was injected through the cement mortar/bentonite system and collected out of the column in sequential syringes for analysis of the chemical composition evolution. For the study of the post-mortem samples, an innovative use of grazing incidence X-ray diffraction was performed to determine the phases produced at the interface. Scanning electron microscopy coupled to energy dispersive X-rays and local specific surface area measurements were also applied. The main results showed the initial development of a Mg perturbation in FEBEX-bentonite at the interface related to the formation of 7 Å precursors of Mg-clay 2:1 sheet silicates as the main neogenic phases expected in the long term. Additionally, a Ca-carbonation skin (calcite) occurred in cement mortar at the interface. The specifications of the reaction products observed at small scales of time and space (μm) are highly promising for the development of reaction concepts and support modelling in the future, which could offer a useful perspective for advancement in the upscaling of concrete/bentonite interface perturbation., This work was supported by funding from the European Union’s Horizon 2020 Research and Training programme from EUROATOM [H2020-NFRP 2014, 2015] under grant agreement nº662147; CEBAMA
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Progression of the geothermical interaction at the concrete-bentonite interface under simulated engineered barrier conditions

  • Garralón, Amparo
  • Fernández, R.
  • Ruiz, A. L.
  • Ortega, A.
  • Alonso, M. Cruz
  • Fernández, Álvaro
  • Cuevas, Jaime
  • Turrero, María Jesús
  • Torres, Elena
Trabajo presentado al 5th International Workshop on Mechanisms and Modelling of Waste-Cement Interactions, celebrado en Karlsruhe (Alemania) del 25 al 27 de marzo de 2019., The research leading to these results has received funding from the European Union's Horizon 2020 Programme of the EURATOM (H2020‐NFRP‐2014/2015) under grant agreement n° 662147 (CEBAMA). Ciemat thanks the Annex XLII of the ENRESA‐CIEMAT framework agreement.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Ageing of high and low pH concretes after short and long periods in contact with groundwaters

  • Alonso, M. Cruz
  • García Calvo, José Luis
  • Flor-Laguna, Virtudes
  • Fernández, Álvaro
Trabajo presentado al Second Workshop of the HORIZON 2020 CEBAMA Project, celebrado en Espoo (Finlandia), del 16 al 18 de mayo de 2017., During the second year of the Cebama Project, the work performed by CSIC was focused in two directions: 1) Study of the long-term interaction of concrete with groundwaters: i) samples of the FEBEX shotcreted concrete plug, after 13 years in the Grimsel Test Site conditions under the interaction of the granite and bentonite porewaters, at the concrete / bentonite contact and ii) concrete of the HB6 cell, after 10 years operation with the interaction of clayey and bentonite porewater, and 2) short-term interaction, under percolation tests, of aged or new high-pH (hpH) and low-pH (lpH) concretes. The general objective is to analyse the performance of different concrete types in real and simulated deep geological repository conditions. In the long term studies, the interaction of the concrete of the Febex concrete with the bentonite porewater has caused additional ettringite formation due to the sulphate penetration from the saturated bentonite. This ettringite formation has been evidenced from the concrete / bentonite Interfacial Transition Zone (ITZ) towards 1 cm inside the concrete. Alterations of the C-S-H enriched in Al and portlandite dissolution was also observed. Additionally, Cl diffusion from bentonite up to 5 cm inside the concrete was evident with Friedel salt formation. The pore structure of the concrete was affected with increase of micropores. In HB6 concrete the clayey and bentonite waters lead also to new ettringite formation, pH decrease and portlandite dissolution. In the short-term percolation tests a decrease in the pH of the percolated liquid was observed from hpH concrete with a sharp decay to that of Grimsel granite water pH. While the pH of percolated liquid remains unchanged with the lpH concrete. The first results of the short-term interaction between concrete and granite groundwater showed the formation of more ettringite in FEBEX hpH as consequence of the particular concrete composition that favours the movement of sulphates and Al to form new ettringite. Although the pore pH decreases below portlandite stability the bulk concrete still remains alkaline. On the contrary in Äspö lpH no new solid phases have been detected and alkalies are not leached. Longer and deeper studies are in way., The research leading to these results has received funding from the European Union's Horizon 2020 Reasearch and Training Programme of the European Atomic Energy Community (EURATOM) (H2020-NFRP-2014/2015) under grant agreement n° 662147 (CEBAMA).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Cebama reference mix design for low-pH concrete and paste, preliminarycharacterisation

  • Vehmas, Tapio
  • Leivo, Markku
  • Holt, Erika
  • Alonso, M. Cruz
  • García Calvo, José Luis
  • Fernández, Álvaro
  • Isaac, Matthew
  • Rastrick, Emily
  • Read, David
  • Vašíček, Radek
  • Hloušek, Jaroslav
  • Hausmannová, Lucie
  • Večerník, Petr
  • Červinka, Radek
  • Havlová, Václava
  • Lange, Steve
  • Klinkenberg, Martina
  • Bosbach, Dirk
  • Deissmann, Guido
  • Montoya, Vanessa
  • Ait Mouheb, Naila
  • Adam, Christian
  • Schild, Dieter
  • Schäfer, Thorsten
Trabajo presentado al Second Workshop of the HORIZON 2020 CEBAMA Project, celebrado en Espoo (Finlandia), del 16 al 18 de mayo de 2017., A reference low-pH concrete and paste mix were manufactured within the Cebama-project. Reference mixtures were casted at VTT in March 2016 and were distributed among some of the Cebama partners. Reference mix designs will be used by different partners as a common material to study their behaviour in contact with waters of different composition and interaction with radionuclides. Additionally, these materials will be used for model calibration. This article provides a summary of the characterization methods used by different partners and gives an overview of the experiments which will be made in the future with the reference materials., The research leading to these results has received funding from the European Union's Horizon 2020 Reasearch and Training Programme of the European Atomic Energy Community (EURATOM) (H2020-NFRP-2014/2015) under grant agreement n° 662147 (CEBAMA).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Ground-water composition in the interaction with low-pH OPC-SF based concrete

  • Alonso, Carmen
  • Fernández, Álvaro
  • García Calvo, José Luis
Trabajo presentado al International Symposium on Cement-base Materials for Nuclear Waste (NUWCEM), celebrado en Avignon (Francia), del 24 al 26 de octubre de 2018., This paper is part of the work receiving funding from the European Union's Horizon 2020 Research and Training Programme of the European Atomic Energy Community (EURATOM) (H2020-NFRP-2014/2015) under grant agreement n° 662147 (CEBAMA).